Download or read book Heat Transfer Study of a Triple Row Impingement Channel at Large Impingement Heights written by Roberto Claretti and published by . This book was released on 2011 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced cooling techniques are required to increase the Brayton cycle temperature ratio necessary for the increase of the overall cycle's efficiency. Current turbine components are cooled with an array of internal cooling channels in the midchord section of the blade, pin fin arrays at the trailing edge and impingement channels in the leading edge. Impingement channels provide the designer with high convective coefficients on the target surface. Increasing the heat transfer coefficient of these channels has been a subject of research for the past 20 years. In the current study, a triple row impingement channel is studied with a jet to target spacing of 6, 8 and 10. The effects of sidewalls are also analyzed. Temperature sensitive paint alongside thin foil heaters are used to obtain heat transfer distributions throughout the target and side walls of the three different channels. Thermal performances were also calculated for the two largest channels. It was found that the side walls provide a significant amount of cooling especially when the channels are mounted side by side so that their sidewalls behave as fins. Similar to literature it was found that an increase in Z/D decreases heat transfer coefficient and provides a more uniform profile. It was also found that the Z/D = 6 and 8 target wall heat transfer profiles are very similar, hinting to the fact that successful potential core impingement may have occurred at height of eight diameters. A Computational Fluid Dynamics, or CFD, study was also performed to provide better insight into the flow field that creates such characteristic heat transfer profiles. The Realizable k-μ solution with enhanced wall functions gave surface heat transfer coefficients 30% off from the experimental data.
Download or read book Heat and Fluid Flow Characterization of a Single hole per row Impingement Channel at Multiple Impingement Heights written by Roberto Claretti and published by . This book was released on 2013 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present work studies the relationship between target and sidewall surfaces of a multi-row, narrow impingement channel at various jet heights with one impingement hole per row. Temperature sensitive paint and constant flux heaters are used to gather heat transfer data on the target and side walls. Jet-to-target distance is set to 1, 2, 3, 5, 7 and 9 jet diameters. The channel width is 4 jet diameters and the jet stream wise spacing is 5 jet diameters. All cases were run at Reynolds numbers ranging from 5,000 to 30,000. Pressure data is also gathered and used to calculate the channel mass flux profiles, used to better understand the flow characteristics of the impingement channel. While target plate heat transfer profiles have been thoroughly studied in the literature, side wall data has only recently begun to be studied. The present work shows the significant impact the side walls provide to the overall heat transfer capabilities of the impingement channel. It was shown that the side walls provide a significant amount of heat transfer to the channel. A channel height of three diameters was found to be the optimum height in order to achieve the largest heat transfer rates out of all channels.
Download or read book Multiple Jet Impingement Heat Transfer Characteristic written by and published by . This book was released on 1980 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impingement Jet Cooling in Gas Turbines written by R.S. Amano and published by WIT Press. This book was released on 2014-05-28 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the requirement for enhanced cooling technologies on modern gas turbine engines, advanced research and development has had to take place in field of thermal engineering. Among the gas turbine cooling technologies, impingement jet cooling is one of the most effective in terms of cooling effectiveness, manufacturability and cost. The chapters contained in this book describe research on state-of-the-art and advanced cooling technologies that have been developed, or that are being researched, with a variety of approaches from theoretical, experimental, and CFD studies. The authors of the chapters have been selected from some of the most active researchers and scientists on the subject. This is the first to book published on the topics of gas turbines and heat transfer to focus on impingement cooling alone.
Download or read book Journal of Thermophysics and Heat Transfer written by and published by . This book was released on 2000 with total page 1190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This journal is devoted to the advancement of the science and technology of thermophysics and heat transfer through the dissemination of original research papers disclosing new technical knowledge and exploratory developments and applications based on new knowledge. It publishes papers that deal with the properties and mechanisms involved in thermal energy transfer and storage in gases, liquids, and solids or combinations thereof. These studies include conductive, convective, and radiative modes alone or in combination and the effects of the environment.
Download or read book Issues in Applied Physics 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 6150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Applied Physics / 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Applied Physics. The editors have built Issues in Applied Physics: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Applied Physics in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Applied Physics: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Multiple Jet Impingement Heat Transfer Characteristic written by and published by . This book was released on 1980 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbine Heat Transfer and Cooling Technology Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.
Download or read book Paper written by and published by . This book was released on 2001 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1990 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Numerical Study of Impingement Heat Transfer in a Confined Circular Jet written by In-Gyu Park and published by . This book was released on 1994 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASME Technical Papers written by and published by . This book was released on 2001 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Porous Media written by Kambiz Vafai and published by CRC Press. This book was released on 2005-03-30 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades, advances in modeling flow, heat, and mass transfer through a porous medium have dramatically transformed engineering applications. Comprehensive and cohesive, Handbook of Porous Media, Second Edition presents a compilation of research related to heat and mass transfer including the development of practical applications
Download or read book Impingement Heat Transfer with Re entry Channel Nozzles written by Guohua Chen and published by . This book was released on 1989 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Impingement heat transfer is not significantly influenced by L/w." --
Download or read book A Fundamental Investigation of Jet Impingement Heat Transfer written by Frederick F. Cadek and published by . This book was released on 1968 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Jet Impingement Heat Transfer in Two pass Rotating Rectangular Channels written by Yuming Zhang and published by . This book was released on 1996 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Engineering in Power Systems written by Ryoichi Amano and published by WIT Press. This book was released on 2008 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and development in thermal engineering for power systems are of significant importance to many scientists who are engaged in research and design work in power-related industries and laboratories. This book focuses on variety of research areas including Components of Compressor and Turbines that are used for both electric power systems and aero engines, Fuel Cells, Energy Conversion, and Energy Reuse and Recycling Systems. To be competitive in today's market, power systems need to reduce the operating costs, increase capacity factors and deal with many other tough issues. Heat Transfer and fluid flow issues are of great significance and it is likely that a state-of-the-art edited book with reference to power systems will make a contribution for design and R&D engineers and the development towards sustainable energy systems.
