Download or read book Transport Phenomena in Heat and Mass Transfer written by J.A. Reizes and published by Elsevier. This book was released on 2012-12-02 with total page 833 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical, numerical and experimental studies of transport phenomena in heat and mass transfer are reported in depth in this volume. Papers are presented which review and discuss the most recent developments in areas such as: Mass transfer; Cooling of electronic components; Phase change processes; Instrumentation techniques; Numerical methods; Heat transfer in rotating machinery; Hypersonic flows; and Industrial applications. Bringing together the experience of specialists in these fields, the volume will be of interest to researchers and practising engineers who wish to enhance their knowledge in these rapidly developing areas.
Download or read book An Overview of Heat Transfer Phenomena written by Salim Newaz Kazi and published by BoD – Books on Demand. This book was released on 2012-10-31 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the wake of energy crisis due to rapid growth of industries, urbanization, transportation, and human habit, the efficient transfer of heat could play a vital role in energy saving. Industries, household requirements, offices, transportation are all dependent on heat exchanging equipment. Considering these, the present book has incorporated different sections related to general aspects of heat transfer phenomena, convective heat transfer mode, boiling and condensation, heat transfer to two phase flow and heat transfer augmentation by different means.
Download or read book Heat Transfer Phenomena and Applications written by Salim Newaz Kazi and published by BoD – Books on Demand. This book was released on 2012-10-24 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer calculations in different aspects of engineering applications are essential to aid engineering design of heat exchanging equipment. Minimizing of computational time is a challenging task faced by researchers and users. Methodology of calculations in some application areas are incorporated in this book, such as differential analysis of heat recoveries with CFD in a tube bank, heating and ventilation of equipment and methods for analytical solution of nonlinear problems. Numerical analysis is the prerequisite of design and for the manufacture of heat exchanging equipment. Some numerical and experimental information are presented with utmost skill. Similarly, the analytical solution of heat transfer is touched in this book. Study of heat transfer phenomena and applications are equally emphasized in this issue.
Download or read book Advanced Transport Phenomena written by L. Gary Leal and published by Cambridge University Press. This book was released on 2007-06-18 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Transport Phenomena is ideal as a graduate textbook. It contains a detailed discussion of modern analytic methods for the solution of fluid mechanics and heat and mass transfer problems, focusing on approximations based on scaling and asymptotic methods, beginning with the derivation of basic equations and boundary conditions and concluding with linear stability theory. Also covered are unidirectional flows, lubrication and thin-film theory, creeping flows, boundary layer theory, and convective heat and mass transport at high and low Reynolds numbers. The emphasis is on basic physics, scaling and nondimensionalization, and approximations that can be used to obtain solutions that are due either to geometric simplifications, or large or small values of dimensionless parameters. The author emphasizes setting up problems and extracting as much information as possible short of obtaining detailed solutions of differential equations. The book also focuses on the solutions of representative problems. This reflects the book's goal of teaching readers to think about the solution of transport problems.
Download or read book University Physics written by Samuel J. Ling and published by . This book was released on 2017-12-19 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: University Physics is designed for the two- or three-semester calculus-based physics course. The text has been developed to meet the scope and sequence of most university physics courses and provides a foundation for a career in mathematics, science, or engineering. The book provides an important opportunity for students to learn the core concepts of physics and understand how those concepts apply to their lives and to the world around them. Due to the comprehensive nature of the material, we are offering the book in three volumes for flexibility and efficiency. Coverage and Scope Our University Physics textbook adheres to the scope and sequence of most two- and three-semester physics courses nationwide. We have worked to make physics interesting and accessible to students while maintaining the mathematical rigor inherent in the subject. With this objective in mind, the content of this textbook has been developed and arranged to provide a logical progression from fundamental to more advanced concepts, building upon what students have already learned and emphasizing connections between topics and between theory and applications. The goal of each section is to enable students not just to recognize concepts, but to work with them in ways that will be useful in later courses and future careers. The organization and pedagogical features were developed and vetted with feedback from science educators dedicated to the project. VOLUME II Unit 1: Thermodynamics Chapter 1: Temperature and Heat Chapter 2: The Kinetic Theory of Gases Chapter 3: The First Law of Thermodynamics Chapter 4: The Second Law of Thermodynamics Unit 2: Electricity and Magnetism Chapter 5: Electric Charges and Fields Chapter 6: Gauss's Law Chapter 7: Electric Potential Chapter 8: Capacitance Chapter 9: Current and Resistance Chapter 10: Direct-Current Circuits Chapter 11: Magnetic Forces and Fields Chapter 12: Sources of Magnetic Fields Chapter 13: Electromagnetic Induction Chapter 14: Inductance Chapter 15: Alternating-Current Circuits Chapter 16: Electromagnetic Waves
Download or read book Transfer Phenomena in Fluid and Heat Flows written by António F. Miguel and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special topic volume of Defect and Diffusion Forum covers in a wider sense diffusion related phenomena. One of the most important challenges of modern society is the efficient, secure and sustainable generation and conversion of energy. This topics spans from the application of classical fossil fuels (e.g. oil and coal based) to natural gas and more alternative approaches which are based on bio fuels, solar energy and wave energy conversion. In the same way important are the connected topics of reusing waste thermal energy as well as the opposite need of cooling. A further topic which requires a similar skill set and which is covered in this topical volume is related to the manufacturing (e.g. furnaces), modification (e.g. heat treatment) and processing (thermal cutting) of materials. Heat and Energy Transfer, Turbulence, Cooling, Thermal Characteristics, Fluid Diffusion Characteristics, Thermal Fatigue Analysis Materials Science.
Download or read book Transfer Phenomena in Fluid and Heat Flows XI written by Luiz Rocha and published by Trans Tech Publications Ltd. This book was released on 2020-02-12 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topics covered in this special issue are related to the research of the phenomena of heat and mass transfer in the various areas of engineering and range from mathematics models and methods of numerical analysis of heat and mass transfer processes in generalized technical systems to the development of technologies in food and biomass processing and creation of real technical solutions in mechanical engineering.
Download or read book Introduction to Transfer Phenomena in PEM Fuel Cells written by Bilal Abderezzak and published by Elsevier. This book was released on 2018-11-13 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Transfer Phenomena in PEM Fuel Cells presents the fruit of several years of research in the area of fuel cells. The book illustrates the transfer phenomena occurring inside a single cell and describes the technology field of hydrogen, explicitly the production, storage and risk management of hydrogen as an energy carrier. Several applications of hydrogen are also cited, and special interest is dedicated to the PEM Fuel Cell. Mass, charge and heat transfer phenomena are also discussed in this great resource that includes explanations, illustrations and governing equations for each section. Illustrates transfer phenomena occurring within a single cell Describes the technological field of hydrogen (production, storage, and risk and management) Introduces the various applications of hydrogen Presents mass transfer, charge and heat phenomena
Download or read book Heat Transfer Phenomena written by Richard Charles Leslie Bosworth and published by . This book was released on 1952 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Air Engine written by Allan J. Organ and published by Elsevier. This book was released on 2007-08-28 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two centuries after the original invention, the Stirling engine is now a commercial reality as the core component of domestic CHP (combined heat and power) – a technology offering substantial savings in raw energy utilization relative to centralized power generation. The threat of climate change requires a net reduction in hydrocarbon consumption and in emissions of 'greenhouse' gases whilst sustaining economic growth. Development of technologies such as CHP addresses both these needs. Meeting the challenge involves addressing a range of issues: a long-standing mismatch between inherently favourable internal efficiency and wasteful external heating provision; a dearth of heat transfer and flow data appropriate to the task of first-principles design; the limited rpm capability when operating with air (and nitrogen) as working fluid. All of these matters are explored in depth in The air engine: Stirling cycle power for a sustainable future. The account includes previously unpublished insights into the personality and potential of two related regenerative prime movers - the pressure-wave and thermal-lag engines. Contains previously unpublished insights into the pressure-wave and thermal-lag engines Deals with a technology offering scope for saving energy and reducing harmful emissions without compromising economic growth Identifies and discusses issues of design and their implementation
Download or read book Transfer Phenomena in Fluid and Heat Flows XII written by Stanislav Kolisnychenko and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only
Download or read book Transport Phenomena in Porous Media III written by Derek B Ingham and published by Elsevier. This book was released on 2005-07-29 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid and flow problems in porous media have attracted the attention of industrialists, engineers and scientists from varying disciplines, such as chemical, environmental, and mechanical engineering, geothermal physics and food science. There has been a increasing interest in heat and fluid flows through porous media, making this book a timely and appropriate resource.Each chapter is systematically detailed to be easily grasped by a research worker with basic knowledge of fluid mechanics, heat transfer and computational and experimental methods. At the same time, the readers will be informed of the most recent research literature in the field, giving it dual usage as both a post-grad text book and professional reference.Written by the recent directors of the NATO Advanced Study Institute session on 'Emerging Technologies and Techniques in Porous Media' (June 2003), this book is a timely and essential reference for scientists and engineers within a variety of fields.
Download or read book Transport Phenomena in Fires written by Mohammad Faghri and published by WIT Press. This book was released on 2008 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlled fires are beneficial for the generation of heat and power while uncontrolled fires, like fire incidents and wildfires, are detrimental and can cause enormous material damage and human suffering. This edited book presents the state-of-the-art of modeling and numerical simulation of the important transport phenomena in fires. It describes how computational procedures can be used in analysis and design of fire protection and fire safety. Computational fluid dynamics, turbulence modeling, combustion, soot formation, thermal radiation modeling are demonstrated and applied to pool fires, flame spread, wildfires, fires in buildings and other examples.
Download or read book An Overview of Heat Transfer Phenomena written by Salim Newaz Kazi and published by IntechOpen. This book was released on 2012-10-31 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the wake of energy crisis due to rapid growth of industries, urbanization, transportation, and human habit, the efficient transfer of heat could play a vital role in energy saving. Industries, household requirements, offices, transportation are all dependent on heat exchanging equipment. Considering these, the present book has incorporated different sections related to general aspects of heat transfer phenomena, convective heat transfer mode, boiling and condensation, heat transfer to two phase flow and heat transfer augmentation by different means.
Download or read book Transport Phenomena written by Robert Byron Bird and published by John Wiley & Sons. This book was released on 2002 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: Careful attention is paid to the presentation of the basic theory. * Enhanced sections throughout text provide much firmer foundation than the first edition. * Literature citations are given throughout for reference to additional material.
Download or read book Flow and Heat Transfer in Geothermal Systems written by Aniko Toth and published by Elsevier. This book was released on 2016-10-11 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow and Heat Transfer in Geothermal Systems: Basic Equations for Description and Modeling Geothermal Phenomena and Technologies is the ideal reference for research in geothermal systems and alternative energy sources. Written for a wide variety of users, including geologists, geophysicists, hydro-geologists, and engineers, it offers a practical framework for the application of heat and flow transport theory. Authored by two of the world’s foremost geothermal systems experts, whose combined careers span more than 50 years, this text is a one-stop resource for geothermal system theory and application. It will help geoscientists and engineers navigate the wealth of new research that has emerged on the topic in recent years. Presents a practical and immediately implementable framework for understanding and applying heat and flow transport theory Features equations for modelling geothermal phenomena and technologies in full detail Provides an ideal text for applications in both geophysics and engineering
Download or read book Modelling of Engineering Heat Transfer Phenomena written by Bengt Sundén and published by Computational Mechanics. This book was released on 1999 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with methods and procedures for a variety of engineering heat transfer phenomena. It presents information on progress and status of principles, together with limitations and opportunities in modelling. Relevant results are also provided. All contributions featured were invited and reviewed and the topics discussed are as follows: modelling and optimization in thermal science - from engineering to predicting organization in nature; microscales of natural flows; roles of CFD simulation in thermal analysis of microelectonic equipment; turbulence modelling in continuous casting processes; computational modelling nanosecond pulsed laser-induced melting and vaporization; finite element modelling of coupled convection-conduction phase change; modelling of heat transfer in heat pipes; modelling of inverse heat transfer; application of the boundary element method to the solution of heat radiation problems; improved lumped-differential formulations in heat transfer; modelling homogeneous bubble nucleation in liquids.
