Download or read book Heat Transfer Modelling Using COMSOL written by Layla S. Mayboudi and published by Stylus Publishing, LLC. This book was released on 2018-07-09 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fins have been used historically as reliable design features for thermal management, which continues to be an important problem in engineering today. This book develops heat transfer models for progressively complex fin designs. Mathematicians, engineers, and analysts may equally benefit from the content as it provides the reader with numerical and analytical tools to approach general and thermal management heat transfer problems. The main focus is on the COMSOL® Multiphysics Heat Transfer module; however, the fundamentals may be applied to other commercial packages such as ANSYS and Abaqus. The content can be utilized in a variety of engineering disciplines including mechanical, aerospace, biomedical, chemical, civil, and electrical, etc. Features: +Includes numerous example models that enable the reader to implement conceptual material in practical scenarios with broad industrial applications +Uses COMSOL Multiphysics® version 5.3 in combination with the Heat Transfer Module to set up and carry out the numerical analysis for the models presented in the book +Presents mathematical methods related to the problems +Includes a companion disc with models and custom apps created with COMSOL Application Builder (available by emailing info @ merclearning.com with proof of purchase if e-version)
Download or read book Comsol Heat Transfer Models written by Layla S. Mayboudi and published by Multiphysics Modeling. This book was released on 2019-10-15 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides the reader through the process of model creation for heat transfer analysis with the finite element method. The book describes thermal imaging experiments that demonstrate how such models can be validated. It presents application examples, such as heating water in a kettle, to basement insulation, a heated seat, molten rock, pipe flow, and an innovative extended surface. A companion disc provides the files so models can be run (using COMSOL or other software) in order to observe real-world behavior of the applications. Historical background information is provided to show the progression of heat transfer science and mathematical modeling from the earliest developments to the most recent advances in technology. Features: Includes example models that enable the reader to implement conceptual material in practical scenarios with broad industrial applications Includes companion files with models and geometry files created with COMSOL Multiphysics(R) or imported from a third-party CAD tool.
Download or read book Heat Transfer Modelling Using COMSOL written by L. S. Mayboudi and published by . This book was released on 2019 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fins have been used historically as reliable design features for thermal management, which continues to be an important problem in engineering today. This book develops heat transfer models for progressively complex fin designs. --
Download or read book Multiphysics Modeling Using COMSOL written by Roger Pryor and published by Jones & Bartlett Learning. This book was released on 2011 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphysics Modeling Using COMSOL? rapidly introduces the senior level undergraduate, graduate or professional scientist or engineer to the art and science of computerized modeling for physical systems and devices. It offers a step-by-step modeling methodology through examples that are linked to the Fundamental Laws of Physics through a First Principles Analysis approach. The text explores a breadth of multiphysics models in coordinate systems that range from 1D to 3D and introduces the readers to the numerical analysis modeling techniques employed in the COMSOL? Multiphysics? software. After readers have built and run the examples, they will have a much firmer understanding of the concepts, skills, and benefits acquired from the use of computerized modeling techniques to solve their current technological problems and to explore new areas of application for their particular technological areas of interest.
Download or read book Geometry Creation and Import With COMSOL Multiphysics written by Layla S. Mayboudi and published by Mercury Learning and Information. This book was released on 2019-09-20 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the geometry creation techniques for use in finite element analysis. Examples are provided as a sequence of fin designs with progressively increasing complexity. A fin was selected as it is a feature widely employed for thermal management. As the content progresses, the reader learns to create or import a geometry into a FEM tool using COMSOL Multiphysics®. The fundamentals may also be applied to other commercial packages such as ANSYS® or AbaqusTM. The content can be utilized in a variety of engineering disciplines including mechanical, aerospace, biomedical, chemical, civil, and electrical. The book provides an overview of the tools available to create and interact with the geometry. It also takes a broader look on the world of geometry, showing how geometry is a fundamental part of nature and how it is interconnected with the world around us. Features: Includes example models that enable the reader to implement conceptual material in practical scenarios with broad industrial applications Provides geometry modeling examples created with built in features of COMSOL Multiphysics® v. 5.4 or imported from other dedicated CAD tools Presents meshing examples and provides practical advice on mesh generation Includes companion files with models and custom applications created with COMSOL Multiphysics® Application Builder.
Download or read book Modelling Organs Tissues Cells and Devices written by Socrates Dokos and published by Springer. This book was released on 2017-03-08 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a theoretical and practical overview of computational modeling in bioengineering, focusing on a range of applications including electrical stimulation of neural and cardiac tissue, implantable drug delivery, cancer therapy, biomechanics, cardiovascular dynamics, as well as fluid-structure interaction for modelling of organs, tissues, cells and devices. It covers the basic principles of modeling and simulation with ordinary and partial differential equations using MATLAB and COMSOL Multiphysics numerical software. The target audience primarily comprises postgraduate students and researchers, but the book may also be beneficial for practitioners in the medical device industry.
Download or read book Multiphysics Modeling with Finite Element Methods written by William B J Zimmerman and published by World Scientific Publishing Company. This book was released on 2006-10-25 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element methods for approximating partial differential equations that arise in science and engineering analysis find widespread application. Numerical analysis tools make the solutions of coupled physics, mechanics, chemistry, and even biology accessible to the novice modeler. Nevertheless, modelers must be aware of the limitations and difficulties in developing numerical models that faithfully represent the system they are modeling. This textbook introduces the intellectual framework for modeling with Comsol Multiphysics, a package which has unique features in representing multiply linked domains with complex geometry, highly coupled and nonlinear equation systems, and arbitrarily complicated boundary, auxiliary, and initial conditions. But with this modeling power comes great opportunities and great perils. Progressively, in the first part of the book the novice modeler develops an understanding of how to build up complicated models piecemeal and test them modularly. The second part of the book introduces advanced analysis techniques. The final part of the book deals with case studies in a broad range of application areas including nonlinear pattern formation, thin film dynamics and heterogeneous catalysis, composite and effective media for heat, mass, conductivity, and dispersion, population balances, tomography, multiphase flow, electrokinetic, microfluidic networks, plasma dynamics, and corrosion chemistry. As a revision of Process Modeling and Simulation with Finite Element Methods, this book uses the very latest features of Comsol Multiphysics. There are new case studies on multiphase flow with phase change, plasma dynamics, electromagnetohydrodynamics, microfluidic mixing, and corrosion. In addition, major improvements to the level set method for multiphase flow to ensure phase conservation is introduced. More information about COMSOL can be found here.
Download or read book Radiative Heat Transfer written by Michael F. Modest and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a comprehensive treatment of heat transfer. In addition to the standard topics usually covered, it also includes a number of modern state-of-the-art topics including: radiative properties of particles, generation of P-N approximation and collimated irradiation.
Download or read book Computational Fluid Dynamics and COMSOL Multiphysics written by Ashish S. Chaurasia and published by CRC Press. This book was released on 2021-12-29 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers computational fluid dynamics simulation using COMSOL Multiphysics® Modeling Software in chemical engineering applications. In the volume, the COMSOL Multiphysics package is introduced and applied to solve typical problems in chemical reactors, transport processes, fluid flow, and heat and mass transfer. Inspired by the difficulties of introducing the use of COMSOL Multiphysics software during classroom time, the book incorporates the author’s experience of working with undergraduate, graduate, and postgraduate students to make the book user friendly and that, at the same time, addresses typical examples within the subjects covered in the chemical engineering curriculum. Real-world problems require the use of simulation and optimization tools, and this volume shows how COMSOL Multiphysics software can be used for that purpose. Key features: • Includes over 500 step-by-step screenshots • Shows the graphical user interface of COMSOL, which does not require any programming effort • Provides chapter-end problems for extensive practice along with solutions • Includes actual examples of chemical reactors, transport processes, fluid flow, and heat and mass transfer This book is intended for students who want or need more help to solve chemical engineering assignments using computer software. It can also be used for computational courses in chemical engineering. It will also be a valuable resource for professors, research scientists, and practicing engineers.
Download or read book Introduction to Chemical Engineering Computing written by Bruce A. Finlayson and published by John Wiley & Sons. This book was released on 2014-03-05 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Step-by-step instructions enable chemical engineers to master key software programs and solve complex problems Today, both students and professionals in chemical engineering must solve increasingly complex problems dealing with refineries, fuel cells, microreactors, and pharmaceutical plants, to name a few. With this book as their guide, readers learn to solve these problems using their computers and Excel, MATLAB, Aspen Plus, and COMSOL Multiphysics. Moreover, they learn how to check their solutions and validate their results to make sure they have solved the problems correctly. Now in its Second Edition, Introduction to Chemical Engineering Computing is based on the author’s firsthand teaching experience. As a result, the emphasis is on problem solving. Simple introductions help readers become conversant with each program and then tackle a broad range of problems in chemical engineering, including: Equations of state Chemical reaction equilibria Mass balances with recycle streams Thermodynamics and simulation of mass transfer equipment Process simulation Fluid flow in two and three dimensions All the chapters contain clear instructions, figures, and examples to guide readers through all the programs and types of chemical engineering problems. Problems at the end of each chapter, ranging from simple to difficult, allow readers to gradually build their skills, whether they solve the problems themselves or in teams. In addition, the book’s accompanying website lists the core principles learned from each problem, both from a chemical engineering and a computational perspective. Covering a broad range of disciplines and problems within chemical engineering, Introduction to Chemical Engineering Computing is recommended for both undergraduate and graduate students as well as practicing engineers who want to know how to choose the right computer software program and tackle almost any chemical engineering problem.
Download or read book Heat Transfer Modeling written by George Sidebotham and published by Springer. This book was released on 2015-02-13 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This innovative text emphasizes a "less-is-more" approach to modeling complicated systems such as heat transfer by treating them first as "1-node lumped models" that yield simple closed-form solutions. The author develops numerical techniques for students to obtain more detail, but also trains them to use the techniques only when simpler approaches fail. Covering all essential methods offered in traditional texts, but with a different order, Professor Sidebotham stresses inductive thinking and problem solving as well as a constructive understanding of modern, computer-based practice. Readers learn to develop their own code in the context of the material, rather than just how to use packaged software, offering a deeper, intrinsic grasp behind models of heat transfer. Developed from over twenty-five years of lecture notes to teach students of mechanical and chemical engineering at The Cooper Union for the Advancement of Science and Art, the book is ideal for students and practitioners across engineering disciplines seeking a solid understanding of heat transfer. This book also: · Adopts a novel inductive pedagogy where commonly understood examples are introduced early and theory is developed to explain and predict readily recognized phenomena · Introduces new techniques as needed to address specific problems, in contrast to traditional texts’ use of a deductive approach, where abstract general principles lead to specific examples · Elucidates readers’ understanding of the "heat transfer takes time" idea—transient analysis applications are introduced first and steady-state methods are shown to be a limiting case of those applications · Focuses on basic numerical methods rather than analytical methods of solving partial differential equations, largely obsolete in light of modern computer power · Maximizes readers’ insights to heat transfer modeling by framing theory as an engineering design tool, not as a pure science, as has been done in traditional textbooks · Integrates practical use of spreadsheets for calculations and provides many tips for their use throughout the text examples
Download or read book Heat Transfer written by Adrian Bejan and published by John Wiley & Sons. This book was released on 2022-04-05 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: HEAT TRANSFER Provides authoritative coverage of the fundamentals of heat transfer, written by one of the most cited authors in all of Engineering Heat Transfer presents the fundamentals of the generation, use, conversion, and exchange of heat between physical systems. A pioneer in establishing heat transfer as a pillar of the modern thermal sciences, Professor Adrian Bejan presents the fundamental concepts and problem-solving methods of the discipline, predicts the evolution of heat transfer configurations, the principles of thermodynamics, and more. Building upon his classic 1993 book Heat Transfer, the author maintains his straightforward scientific approach to teaching essential developments such as Fourier conduction, fins, boundary layer theory, duct flow, scale analysis, and the structure of turbulence. In this new volume, Bejan explores topics and research developments that have emerged during the past decade, including the designing of convective flow and heat and mass transfer, the crucial relationship between configuration and performance, and new populations of configurations such as tapered ducts, plates with multi-scale features, and dendritic fins. Heat Transfer: Evolution, Design and Performance: Covers thermodynamics principles and establishes performance and evolution as fundamental concepts in thermal sciences Demonstrates how principles of physics predict a future with economies of scale, multi-scale design, vascularization, and hierarchical distribution of many small features Explores new work on conduction architecture, convection with nanofluids, boiling and condensation on designed surfaces, and resonance of natural circulation in enclosures Includes numerous examples, problems with solutions, and access to a companion website Heat Transfer: Evolution, Design and Performance is essential reading for undergraduate and graduate students in mechanical and chemical engineering, and for all engineers, physicists, biologists, and earth scientists.
Download or read book Heat Transfer and Fluid Flow in Biological Processes written by Sid M. Becker and published by Academic Press. This book was released on 2014-12-31 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer and Fluid Flow in Biological Processes covers emerging areas in fluid flow and heat transfer relevant to biosystems and medical technology. This book uses an interdisciplinary approach to provide a comprehensive prospective on biofluid mechanics and heat transfer advances and includes reviews of the most recent methods in modeling of flows in biological media, such as CFD. Written by internationally recognized researchers in the field, each chapter provides a strong introductory section that is useful to both readers currently in the field and readers interested in learning more about these areas. Heat Transfer and Fluid Flow in Biological Processes is an indispensable reference for professors, graduate students, professionals, and clinical researchers in the fields of biology, biomedical engineering, chemistry and medicine working on applications of fluid flow, heat transfer, and transport phenomena in biomedical technology. Provides a wide range of biological and clinical applications of fluid flow and heat transfer in biomedical technology Covers topics such as electrokinetic transport, electroporation of cells and tissue dialysis, inert solute transport (insulin), thermal ablation of cancerous tissue, respiratory therapies, and associated medical technologies Reviews the most recent advances in modeling techniques
Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Download or read book Multiphysics Modeling Using COMSOL 5 and MATLAB written by Roger W. Pryor and published by Mercury Learning and Information. This book was released on 2021-12-03 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: COMSOL 5 and MATLAB are valuable software modeling tools for engineers and scientists. This updated edition includes five new models and explores a wide range of models in coordinate systems from 0D to 3D, introducing the numerical analysis techniques employed in COMSOL 5.6 and MATLAB software. The text presents electromagnetic, electronic, optical, thermal physics, and biomedical models as examples. It presents the fundamental concepts in the models and the step-by-step instructions needed to build each model. The companion files include all the built models for each step-by-step example presented in the text and the related animations, as specified. The book is designed to introduce modeling to an experienced engineer or can also be used for upper level undergraduate or graduate courses. FEATURES: Focuses on COMSOL 5.x and MATLAB models that demonstrate the use of concepts for later application in engineering, science, medicine, and biophysics for the development of devices and systems Includes companion files with executable copies of each model and related animations Includes detailed discussions of possible modeling errors and results Uses a step-by-step modeling methodology linked to the Fundamental Laws of Physics. The companion files are also available online by emailing the publisher with proof of purchase at [email protected].
Download or read book Computational Fluid Dynamics and Heat Transfer written by Ryoichi Amano and published by WIT Press. This book was released on 2011 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer and fluid flow issues are of great significance and this state-of-the-art edited book with reference to new and innovative numerical methods will make a contribution for researchers in academia and research organizations, as well as industrial scientists and college students. The book provides comprehensive chapters on research and developments in emerging topics in computational methods, e.g., the finite volume method, finite element method as well as turbulent flow computational methods. Fundamentals of the numerical methods, comparison of various higher-order schemes for convection-diffusion terms, turbulence modeling, the pressure-velocity coupling, mesh generation and the handling of arbitrary geometries are presented. Results from engineering applications are provided. Chapters have been co-authored by eminent researchers.
Download or read book CFD Module written by Mehrzad Tabatabaian and published by Mercury Learning and Information. This book was released on 2015-05-15 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book can be used as a reference for the topic of turbulence modeling, especially in an engineering modeling and simulation course or as a tool for professionals on practical applications. Turbulent flow modeling has many applications in industry. The relevant numerical methods have advanced to the level that could be used by industry professionals to model many natural turbulent flows with acceptable accuracy. In this book we cover the fundamentals of turbulence, modeling techniques, and algorithms (including RANS) available in COMSOL® as well as providing several modeling examples and instructions for building these models. The companion DVD includes models and figures discussed in the book. eBook Customers: Companion files are available for downloading with order number/proof of purchase by writing to the publisher at [email protected]. Features: •Includes companion DVD with models and figures discussed in the book •Explains the physics and principles of turbulence and provides modeling examples using COMSOL
