EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Heat Transfer Enhancement by Structured Turbulence Promoters

Download or read book Heat Transfer Enhancement by Structured Turbulence Promoters written by Martin De Tezanos Pinto and published by . This book was released on 1997 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Study of Effects of Turbulence Promoters on Heat Transfer

Download or read book Study of Effects of Turbulence Promoters on Heat Transfer written by Armour Research Foundation (U.S.) and published by . This book was released on 1950 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is the summary of a literature survey and analytical study performed by the Armour Research Foundation for NEPA on the subject of the effect of turbulence promotion on forced convection heat transfer and fluid friction.

Book Heat Transfer with Turbulence Promoters

Download or read book Heat Transfer with Turbulence Promoters written by Lawrence Arthur Greenberg and published by . This book was released on 1949 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Insert Devices and Integral Roughness in Heat Transfer Enhancement

Download or read book Insert Devices and Integral Roughness in Heat Transfer Enhancement written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-07-08 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief describes heat transfer and pressure drop in heat transfer enhancement by insert devices and integral roughness. The authors deal with twisted-tape insert laminar and turbulent flow in tubes and annuli in smooth tubes and rough tubes, segmented twisted-tape inserts, displaced enhancement devices, wire coil inserts, extended surface inserts and tangential injection devices. The articles also address transverse and helical integral rib roughness, corrugated tube roughness, 3D and 2D roughness, rod bundles, outside roughness for cross flow, non-circular channels, Reynolds analogy and similarity law, numerical simulation and predictive models. The book is ideal for professionals and researchers working with thermal management in devices.

Book Modelling and Simulation of Turbulent Heat Transfer

Download or read book Modelling and Simulation of Turbulent Heat Transfer written by B. Sundén and published by WIT Press. This book was released on 2005-02-21 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing invaluable information for both graduate researchers and R & D engineers in industry and consultancy, this book focuses on the modelling and simulation of fluid flow and thermal transport phenomena in turbulent convective flows. Its overall objective is to present state-of-the-art knowledge in order to predict turbulent heat transfer processes in fundamental and idealized flows as well as in engineering applications. The chapters, which are invited contributions from some of the most prominent scientists in this field, cover a wide range of topics and follow a unified outline and presentation to aid accessibility.

Book A Study on the Effect of Turbulence Promoters on Convective Heat Transfer  microfilm

Download or read book A Study on the Effect of Turbulence Promoters on Convective Heat Transfer microfilm written by Kesava Rao Charugundla and published by . This book was released on 1969 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Previews of Heat and Mass Transfer

Download or read book Previews of Heat and Mass Transfer written by and published by . This book was released on 1998 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Structure of Turbulence in Heat and Mass Transfer

Download or read book Structure of Turbulence in Heat and Mass Transfer written by Zoran Zarić and published by . This book was released on 1982 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.

Book Numerical modeling and simulation of particulate fouling on structured heat transfer surfaces using multiphase Eulerian Lagrangian LES

Download or read book Numerical modeling and simulation of particulate fouling on structured heat transfer surfaces using multiphase Eulerian Lagrangian LES written by Robert Kasper and published by Cuvillier Verlag. This book was released on 2021-04-30 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Durch die gezielte Strukturierung von wärmeübertragenden Oberflächen, wie beispielsweise durch Dellen oder Rippen, kann die örtliche Turbulenz und damit die thermische Durchmischung gesteigert werden. Dies kann die Effizienz von Wärmeübertragern oder Bauteilkühlsystemen erheblich erhöhen. Derartige Oberflächenstrukturrierungen begünstigen jedoch das Partikelfouling, daher die Ablagerung suspendierter Partikel, wie z.B. Sand, Schlamm oder Korrosionsprodukte. Gegenstand dieser Arbeit ist die Entwicklung eines universellen, numerischen CFD-Verfahrens zur Vorhersage des partikulären Foulings auf strukturierten Oberflächen, speziell Dellenoberflächen. Das entwickelte Verfahren basiert auf einer Kombination des Lagrangian-Particle-Trackings zur Beschreibung der dispersen Phase (Foulingpartikel), sowie räumlich und zeitlich aufgelöster Large-Eddy Simulation für die Berechnung der kontinuierlichen Phasen (Trägerfluid). Dieses Vorgehen ermöglicht nicht nur die Auswertung der infolge der Partikelablagerungen verminderten thermo-hydraulischen Effizienz, sondern auch die Untersuchung der Wechselwirkungen zwischen turbulenten Strömungsstrukturen und dem partikulärem Fouling. Dadurch kann gezeigt werden, dass die Verwendung von sphärischen Dellen als Oberflächenstrukturen nicht nur aus thermo-hydraulischer Sicht die optimale Wahl darstellt, sondern auch eine substantielle Verminderung des Partikelfoulings begünstigt. The application of structured heat transfer surfaces, such as dimples or ribs, increase the local turbulence and thus thermal mixing. This can improve the efficiency of heat exchangers or cooling systems significantly. However, structured surfaces are known to promote particulate fouling, hence the unwanted accumulation and deposition of suspended particles (e.g., silt, sludge or iron oxide). The scope of this work is the development of a universal numerical CFD method for the prediction of particulate fouling, especially on dimpled surfaces. The proposed approach is based on a combination of the Lagrangian point-particle tracking for the description of the disperse phase (fouling particles), and spatially and temporally resolved large-eddy simulations for the calculation of the continuous phase (carrier fluid). This approach allows not only the evaluation of the reduced thermo-hydraulic efficiency due to particle deposition, but also the investigation of the interaction between turbulent flow structures and the particulate fouling. It can be shown that the usage of spherical dimples as surface structures is not only the optimal choice from a thermo-hydraulic point of view, but also favors a substantial reduction of particulate fouling.

Book Effects of Turbulence Promoters on Heat Transfer Rates and Pumping Power

Download or read book Effects of Turbulence Promoters on Heat Transfer Rates and Pumping Power written by Elton Foster Hammond and published by . This book was released on 1948 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Vortices and Heat Transfer

Download or read book Vortices and Heat Transfer written by N. K. Mitra and published by . This book was released on 1995 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Heat Transfer Enhancement of Heat Exchangers

Download or read book Heat Transfer Enhancement of Heat Exchangers written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer enhancement in single-phase and two-phase flow heat exchangers in important in such industrial applications as power generating plant, process and chemical industry, heating, ventilation, air conditioning and refrigeration systems, and the cooling of electronic equipment. Energy savings are of primary importance in the design of such systems, leading to more efficient, environmentally friendly devices. This book provides invaluable information for such purposes.

Book Experimental and Numerical Investigation of Turbulent Flow and Heat  mass  Transfer in a Two pass Trapezoidal Channel with Turbulence Promoters

Download or read book Experimental and Numerical Investigation of Turbulent Flow and Heat mass Transfer in a Two pass Trapezoidal Channel with Turbulence Promoters written by Sung Hyuk Oh and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Experiments and numerical predictions were conducted to study heat (mass) transfer characteristics in a two-pass trapezoidal channel simulating the cooling passage of a gas turbine blade. Three different rib configurations were tested for the air entering the smaller cross section of the trapezoidal channel as well as the larger cross section of the trapezoidal channel at four different Reynolds numbers of 9,400, 16,800, 31,800, and 57,200. (+) 60[degree] ribs, ( -- ) 60[degree] ribs and 60[degree] V-shaped ribs were attached on both the top and bottom walls in parallel sequence. A naphthalene sublimation technique was used, and the heat and mass transfer analogy was applied to convert the mass transfer coefficients to heat transfer coefficients. Numerical predictions of three-dimensional flow and heat transfer also were performed for the trapezoidal channel with and without 90[degree] ribs tested by Lee et al. (2007). Reynolds stress turbulence model (RSM) in the FLUENT CFD code was used to calculate the heat transfer coefficients and flow fields at Re = 31,800. The results showed that the combined effects of the rib angle, rib orientation, and the sharp 180[degree] turn significantly affected the heat (mass) transfer distributions. The secondary flows induced by the sharp 180[degree] turn and the angled or V-shaped ribs played a very prominent role in heat (mass) transfer enhancements. The heat (mass) transfer enhancements and the pressure drops across the turn for 60[degree] V-shaped ribs had the highest values, then came the case of (+) 60[degree] ribs, and the heat (mass) transfer enhancements and the friction factor ratios for ( -- ) 60[degree] ribs was the lowest. However, comparing ( -- ) 60[degree] ribs with the 90[degree] ribs, ( -- ) 60[degree] ribs produced higher heat (mass) transfer enhancements than the 90[degree] ribs, as results of the secondary flow induced by the ( -- ) 60[degree] ribs. The overall average heat (mass) transfer for the larger inlet cases was always higher than that for the smaller inlet cases in the ribbed trapezoidal channel. Considering the thermal performance comparisons of the (+) 60[degree] ribs, the ( -- ) 60[degree] ribs, and 60[degree] V-shaped ribs for the smaller inlet cases, the highest thermal performance was produced by the ( -- ) 60[degree] ribs, and the 60[degree] V-shaped ribs and the (+) 60[degree] ribs had almost the same levels of the thermal performance since the 60[degree] V-shaped ribs produced the highest heat (mass) transfer enhancement but also produced highest pressure drops. For the larger inlet cases, the (+) 60[degree] ribs produced the highest values, then came the case of the 60[degree] V-shaped ribs, and the thermal performance for the ( -- ) 60[degree] ribs was the lowest. The Reynolds stress model (RSM) showed well flow fields and heat transfer distributions but underpredicted average Nusselt number ratios.

Book Journal of Heat Transfer

Download or read book Journal of Heat Transfer written by and published by . This book was released on 2008 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Applied Mechanics Reviews

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1985 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt: