Download or read book Laminar Flow Forced Convection in Ducts written by R. K. Shah and published by Academic Press. This book was released on 2014-06-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laminar Flow Forced Convection in Ducts is a sourcebook for compact heat exchanger analytical data. This book describes the analytical solutions for laminar fluid flow and forced convection heat transfer in circular and noncircular pipes, including applicable differential equations and boundary conditions involving velocity and temperature problems of fluid flow. The book also discusses fluid flow—how much power is required to pump fluids through the heat exchanger, as well as the heat transfer—the determination of q" distribution, and the temperature of fluid and walls. The text also analyzes the coolant or heat transfer fluid flows in a nuclear power reactor composed of a bundle of circular section fuel rods located inside a round tube. R.A. Axford addresses fluid flow and heat transfers results for the rod bundle geometry in "Heat Transfer in Rod Bundles." The book also provides an overview and guidelines that can be used for the designer and the applied mathematician. This book is suitable for engineers working in electronics, aerospace, instrumentation, and biomechanics that use cooling or heating exchanges or solar collection systems.
Download or read book NASA Technical Paper written by and published by . This book was released on 1984 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Single Phase Convective Heat Transfer written by Sadik Kakaç and published by Wiley-Interscience. This book was released on 1987-11-03 with total page 1268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 2015-10-27 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer fills the information gap between regularly scheduled journals and university-level textbooks by providing in-depth review articles over a broader scope than in traditional journals or texts. The articles, which serve as a broad review for experts in the field are also of great interest to non-specialists who need to keep up-to-date with the results of the latest research. This serial is essential reading for all mechanical, chemical, and industrial engineers working in the field of heat transfer, or in graduate schools or industry. - Compiles the expert opinions of leaders in the industry - Fills the information gap between regularly scheduled journals and university-level textbooks by providing in-depth review articles over a broader scope than in traditional journals or texts - Essential reading for all mechanical, chemical, and industrial engineers working in the field of heat transfer, or in graduate schools or industry
Download or read book Compact Heat Exchangers written by Alexander Louis London and published by CRC Press. This book was released on 1990 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers are a crucial part of aerospace, marine, cryogenic and refrigeration technology. These essays cover such topics as complicated flow arrangements, complex extended surfaces, two-phase flow and irreversibility in heat exchangers, and single-phase heat transfer.
Download or read book Advances in Mechanical Engineering written by Vilas R. Kalamkar and published by Springer Nature. This book was released on 2020-06-29 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer-reviewed proceedings of the International Conference on Advances in Mechanical Engineering (ICAME 2020). The contents cover latest research in several areas such as advanced energy sources, automation, mechatronics and robotics, automobiles, biomedical engineering, CAD/CAM, CFD, advanced engineering materials, mechanical design, heat and mass transfer, manufacturing and production processes, tribology and wear, surface engineering, ergonomics and human factors, artificial intelligence, and supply chain management. The book brings together advancements happening in the different domains of mechanical engineering, and hence, this will be useful for students and researchers working in mechanical engineering.
Download or read book Heat Transfer Handbook written by Adrian Bejan and published by John Wiley & Sons. This book was released on 2003-06-30 with total page 1496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapters contributed by thirty world-renown experts. * Covers all aspects of heat transfer, including micro-scale and heat transfer in electronic equipment. * An associated Web site offers computer formulations on thermophysical properties that provide the most up-to-date values.
Download or read book Turbulence Measurements and Flow Modeling written by Ching Jen Chen and published by CRC Press. This book was released on 1987 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The CRC Handbook of Mechanical Engineering written by D. Yogi Goswami and published by CRC Press. This book was released on 2004-09-29 with total page 2690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this standard-setting handbook provides and all-encompassing reference for the practicing engineer in industry, government, and academia, with relevant background and up-to-date information on the most important topics of modern mechanical engineering. These topics include modern manufacturing and design, robotics, computer engineering, environmental engineering, economics, patent law, and communication/information systems. The final chapter and appendix provide information regarding physical properties and mathematical and computational methods. New topics include nanotechnology, MEMS, electronic packaging, global climate change, electric and hybrid vehicles, and bioengineering.
Download or read book Advances in Heat Transfer written by James P. Hartnett and published by Elsevier. This book was released on 2003-10-09 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer presents review articles on topics of current interest. Each contribution starts from widely understood principles and brings the reader up to the forefront of the topic being addressed. The favorable response by the international scientific and engineering community to the 37 volumes published to date is an indication of the success of our authors in fulfilling this purpose. This is recommended reading for all mechanical engineers and researchers. - Provides an overview of review articles on topics of current interest - Bridges the gap between academic researchers and practitioners in industry - A long-running and prestigious series
Download or read book Modern Developments in Heat Transfer written by Warren Ibele and published by Elsevier. This book was released on 2012-12-02 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Developments in Heat Transfer provides information pertinent to heat transfer investigation, including convective heat transfer, radiation heat transfer, as well as heat and mass transfer. This book examines the aspects and properties of high temperature heat transfer. Organized into 14 chapters, this book starts with an overview of noncircular duct heat transfer in a wide range of engineering applications from automobile radiators to nuclear power plants. This text then examines the differences between circular and noncircular duct flows. Other chapters describe energy transport by radiation wherein photons, as energy carriers, are released from molecules of the radiating body and travel on straight lines until they are scattered or absorbed by other atoms or molecules. This book discusses as well the process of evaporation, which results in the conversion of a liquid into a vapor. The final chapter deals with plasma dynamics and its features. Physicists, chemists, mathematicians, and engineers will find this book extremely useful.
Download or read book The CRC Handbook of Thermal Engineering written by Frank Kreith and published by Springer Science & Business Media. This book was released on 2000-02-01 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique in its in-depth coverage of heat transfer and fluid mechanics including numerical and computer methods, applications, thermodynamics and fluid mechanics. It will serve as a comprehensive resource for professional engineers well into the new millennium. Some of the material will be drawn from the "Handbook of Mechanical Engineering," but with expanded information in such areas as compressible flow and pumps, conduction, and desalination.
Download or read book Fundamentals of Heat Exchanger Design written by Ramesh K. Shah and published by John Wiley & Sons. This book was released on 2003-08-11 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and unique source integrates the material usually distributed among a half a dozen sources. * Presents a unified approach to modeling of new designs and develops the skills for complex engineering analysis. * Provides industrial insight to the applications of the basic theory developed.
Download or read book Handbook of Applied Thermal Design written by Eric C. Guyer and published by CRC Press. This book was released on 1999-02-01 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gives a foundation to the four principle facets of thermal design: heat transfer analysis, materials performance, heating and cooling technology, and instrumentation and control. The focus is on providing practical thermal design and development guidance across the spectrum of problem analysis, material applications, equipment specification, and sensor and control selection.
Download or read book Design and Operation of Heat Exchangers and their Networks written by Wilfried Roetzel and published by Academic Press. This book was released on 2019-10-04 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Operation of heat Exchangers and Their Networks presents a comprehensive and detailed analysis on the thermal design methods for the most common types of heat exchangers, with a focus on their networks, simulation procedures for their operations, and measurement of their thermal performances. The book addresses the fundamental theories and principles of heat transfer performance of heat exchangers and their applications and then applies them to the use of modern computing technology. Topics discussed include cell methods for condensers and evaporators, dispersion models for heat exchangers, experimental methods for the evaluation of heat exchanger performance, and thermal calculation algorithms for multi-stream heat exchangers and heat exchanger networks. - Includes MATLAB codes to illustrate how the technologies and methods discussed can be easily applied and developed - Analyses a range of different models, applications, and case studies in order to reveal more advanced solutions for industrial applications - Maintains a strong focus on the fundamental theories and principles of the heat transfer performance of heat exchangers and their applications for complex flow arrangement
Download or read book Functional Materials and Advanced Manufacturing written by Chander Prakash and published by CRC Press. This book was released on 2021-01-06 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume set addresses a new knowledge of function materials, their processing, and their characterizations. "Functional and Smart Materials", covered the synthesis and fabrication route of functional and smart materials for universal applications such as material science, mechanical engineering, manufacturing, metrology, nanotechnology, physics, chemical, biology, chemistry, civil engineering, and food science. "Advanced Manufacturing and Processing Technology" covers the advanced manufacturing technologies includes coating, deposition, cladding, nanotechnology, surface finishing, precision machining, processing, and emerging advanced manufacturing technologies for processing of materials for functional applications. "Characterization, Testing, Measurement and Metrology" covered the application of new and advanced characterization techniques to investigate and analysis the processed materials.
Download or read book CRC Handbook of Thermal Engineering written by Raj P. Chhabra and published by CRC Press. This book was released on 2017-11-08 with total page 1649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CRC Handbook of Thermal Engineering, Second Edition, is a fully updated version of this respected reference work, with chapters written by leading experts. Its first part covers basic concepts, equations and principles of thermodynamics, heat transfer, and fluid dynamics. Following that is detailed coverage of major application areas, such as bioengineering, energy-efficient building systems, traditional and renewable energy sources, food processing, and aerospace heat transfer topics. The latest numerical and computational tools, microscale and nanoscale engineering, and new complex-structured materials are also presented. Designed for easy reference, this new edition is a must-have volume for engineers and researchers around the globe.
