Download or read book Nordic Pulp Paper Research Journal written by and published by . This book was released on 2008 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 19th European Symposium on Computer Aided Process Engineering written by Jacek Jezowski and published by Elsevier. This book was released on 2009-06-12 with total page 1341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 19th European Symposium on Computer Aided Process Engineering contains papers presented at the 19th European Symposium of Computer Aided Process Engineering (ESCAPE 19) held in Cracow, Poland, June 14-17, 2009.The ESCAPE series serves as a forum for scientists and engineers from academia and industry to discuss progress achieved in the area of CAPE.* CD-ROM that accompanies the book contains all research papers and contributions * International in scope with guest speeches and keynote talks from leaders in science and industry * Presents papers covering the latest research, key top areas and developments in computer aided process engineering (CAPE)

Download or read book Theoretical Chemical Engineering Abstracts written by and published by . This book was released on 1964 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Evaporation Technology written by Paul E. Minton and published by William Andrew. This book was released on 1988 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume combines a great deal of data only previously available from many different sources into a single, informative volume. It presents evaporation technology as it exists today. Although evaporation is one of the oldest unit operations, it is also an area with dramatic changes in the last quarter century. Although other methods of separation are available, evaporation remains the best process for many applications. All factors must be evaluated in order to select the best evaporator type. This book will be extremely useful in evaluating and deciding which evaporation technology will meet a particular set of requirements.

Download or read book Sodium salt scaling in black liquor evaporators written by Mathias Gourdon and published by . This book was released on 2009 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Low Temperature and Cryogenic Refrigeration written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refrigeration plays a prominent role in our everyday lives, and cryogenics plays a major role in medical science, space technology and the cooling of low-temperature electronics. This volume contains chapters on basic refrigeration systems, non-compression refrigeration and cooling, and topics related to global environmental issues, alternative refrigerants, optimum refrigerant selection, cost-quality optimization of refrigerants, advanced thermodynamics of reverse-cycle machines, applications in medicine, cryogenics, heat pipes, gas-solid absorption refrigeration, multisalt resorption heat pumps, cryocoolers, thermoacoustic refrigeration, cryogenic heat transfer and enhancement and other topics covering theory, design, and applications, such as pulse tube refrigeration, which is the most efficient of all cryocoolers and can be used in space missions.

Download or read book Fluid Bed Technology in Materials Processing written by C. K. Gupta and published by CRC Press. This book was released on 1998-12-28 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Bed Technology in Materials Processing comprehensively covers the various aspects of fluidization engineering and presents an elaborate examination of the applications in a multitude of materials processing techniques. This singular resource discusses: All the basic aspects of fluidization essential to understand and learn about various techniques The range of industrial applications Several examples in extraction and process metallurgy Fluidization in nuclear engineering and nuclear fuel cycle with numerous examples Innovative techniques and several advanced concepts of fluidization engineering, including use and applications in materials processing as well as environmental and bio-engineering Pros and cons of various fluidization equipment and specialty of their applications, including several examples Design aspects and modeling Topics related to distributors effects and flow regimes A separate chapter outlines the importance of fluidization engineering in high temperature processing, including an analysis of the fundamental concepts and applications of high temperature fluidized bed furnaces for several advanced materials processing techniques. Presenting information usually not available in a single source, Fluid Bed Technology in Materials Processing serves Fluidization engineers Practicing engineers in process metallurgy, mineral engineering, and chemical metallurgy Researchers in the field of chemical, metallurgical, nuclear, biological, environmental engineering Energy engineering professionals High temperature scientists and engineers Students and professionals who adopt modeling of fluidization in their venture for design and scale up

Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.

Download or read book Fundamentals of Thermal fluid Sciences written by Yunus A. Çengel and published by McGraw-Hill Company. This book was released on 2012 with total page 1045 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE FOURTH EDITION IN SI UNITS of Fundamentals of Thermal-Fluid Sciences presents a balanced coverage of thermodynamics, fluid mechanics, and heat transfer packaged in a manner suitable for use in introductory thermal sciences courses. By emphasizing the physics and underlying physical phenomena involved, the text gives students practical examples that allow development of an understanding of the theoretical underpinnings of thermal sciences. All the popular features of the previous edition are retained in this edition while new ones are added. THIS EDITION FEATURES: A New Chapter on Power and Refrigeration Cycles The new Chapter 9 exposes students to the foundations of power generation and refrigeration in a well-ordered and compact manner. An Early Introduction to the First Law of Thermodynamics (Chapter 3) This chapter establishes a general understanding of energy, mechanisms of energy transfer, and the concept of energy balance, thermo-economics, and conversion efficiency. Learning Objectives Each chapter begins with an overview of the material to be covered and chapter-specific learning objectives to introduce the material and to set goals. Developing Physical Intuition A special effort is made to help students develop an intuitive feel for underlying physical mechanisms of natural phenomena and to gain a mastery of solving practical problems that an engineer is likely to face in the real world. New Problems A large number of problems in the text are modified and many problems are replaced by new ones. Some of the solved examples are also replaced by new ones. Upgraded Artwork Much of the line artwork in the text is upgraded to figures that appear more three-dimensional and realistic. MEDIA RESOURCES: Limited Academic Version of EES with selected text solutions packaged with the text on the Student DVD. The Online Learning Center (www.mheducation.asia/olc/cengelFTFS4e) offers online resources for instructors including PowerPoint® lecture slides, and complete solutions to homework problems. McGraw-Hill's Complete Online Solutions Manual Organization System (http://cosmos.mhhe.com/) allows instructors to streamline the creation of assignments, quizzes, and tests by using problems and solutions from the textbook, as well as their own custom material.

Download or read book Chemical Engineering Volume 2 written by J H Harker and published by Elsevier. This book was released on 2013-10-22 with total page 1219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Volume 2 covers the properties of particulate systems, including the character of individual particles and their behaviour in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidised beads and filtration are then examined. The latter part of the book deals with separation processes, such as distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer introduced in Chemical Engineering Volume 1. In conclusion, several techniques of growing importance - adsorption, ion exchange, chromatographic and membrane separations, and process intensification - are described. - A logical progression of chemical engineering concepts, volume 2 builds on fundamental principles contained in Chemical Engineering volume 1 and these volumes are fully cross-referenced - Reflects the growth in complexity and stature of chemical engineering over the last few years - Supported with further reading at the end of each chapter and graded problems at the end of the book

Download or read book Molten Salt Technology written by David G. Lovering and published by Springer. This book was released on 2014-11-14 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial High Pressure Applications written by Rudolf Eggers and published by John Wiley & Sons. This book was released on 2012-07-11 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial high pressure processes open the door to many reactions that are not possible under 'normal' conditions. These are to be found in such different areas as polymerization, catalytic reactions, separations, oil and gas recovery, food processing, biocatalysis and more. The most famous high pressure process is the so-called Haber-Bosch process used for fertilizers and which was awarded a Nobel prize. Following an introduction on historical development, the current state, and future trends, this timely and comprehensive publication goes on to describe different industrial processes, including methanol and other catalytic syntheses, polymerization and renewable energy processes, before covering safety and equipment issues. With its excellent choice of industrial contributions, this handbook offers high quality information not found elsewhere, making it invaluable reading for a broad and interdisciplinary audience.

Download or read book Bioprocess Engineering Principles written by Pauline M. Doran and published by Elsevier. This book was released on 1995-04-03 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence and refinement of techniques in molecular biology has changed our perceptions of medicine, agriculture and environmental management. Scientific breakthroughs in gene expression, protein engineering and cell fusion are being translated by a strengthening biotechnology industry into revolutionary new products and services. Many a student has been enticed by the promise of biotechnology and the excitement of being near the cutting edge of scientific advancement. However, graduates trained in molecular biology and cell manipulation soon realise that these techniques are only part of the picture. Reaping the full benefits of biotechnology requires manufacturing capability involving the large-scale processing of biological material. Increasingly, biotechnologists are being employed by companies to work in co-operation with chemical engineers to achieve pragmatic commercial goals. For many years aspects of biochemistry and molecular genetics have been included in chemical engineering curricula, yet there has been little attempt until recently to teach aspects of engineering applicable to process design to biotechnologists.This textbook is the first to present the principles of bioprocess engineering in a way that is accessible to biological scientists. Other texts on bioprocess engineering currently available assume that the reader already has engineering training. On the other hand, chemical engineering textbooks do not consider examples from bioprocessing, and are written almost exclusively with the petroleum and chemical industries in mind. This publication explains process analysis from an engineering point of view, but refers exclusively to the treatment of biological systems. Over 170 problems and worked examples encompass a wide range of applications, including recombinant cells, plant and animal cell cultures, immobilised catalysts as well as traditional fermentation systems.* * First book to present the principles of bioprocess engineering in a way that is accessible to biological scientists* Explains process analysis from an engineering point of view, but uses worked examples relating to biological systems* Comprehensive, single-authored* 170 problems and worked examples encompass a wide range of applications, involving recombinant plant and animal cell cultures, immobilized catalysts, and traditional fermentation systems* 13 chapters, organized according to engineering sub-disciplines, are groupled in four sections - Introduction, Material and Energy Balances, Physical Processes, and Reactions and Reactors* Each chapter includes a set of problems and exercises for the student, key references, and a list of suggestions for further reading* Includes useful appendices, detailing conversion factors, physical and chemical property data, steam tables, mathematical rules, and a list of symbols used* Suitable for course adoption - follows closely curricula used on most bioprocessing and process biotechnology courses at senior undergraduate and graduate levels.

Download or read book Black Liquor Evaporation written by Jim Frederick and published by . This book was released on 2019-10-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Salt Tectonics written by Martin P. A. Jackson and published by Cambridge University Press. This book was released on 2017-02-06 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Salt tectonics is the study of how and why salt structures evolve and the three-dimensional forms that result. A fascinating branch of geology in itself, salt tectonics is also vitally important to the petroleum industry. Covering the entire scale from the microscopic to the continental, this textbook is an unrivalled consolidation of all topics related to salt tectonics: evaporite deposition and flow, salt structures, salt systems, and practical applications. Coverage of the principles of salt tectonics is supported by more than 600 color illustrations, including 200 seismic images captured by state-of-the-art geophysical techniques and tectonic models from the Applied Geodynamics Laboratory at the University of Texas, Austin. These combine to provide a cohesive and wide-ranging insight into this extremely visual subject. This is the definitive practical handbook for professional geologists and geophysicists in the petroleum industry, an invaluable textbook for graduate students, and a reference textbook for researchers in various geoscience fields.

Download or read book A History of Thermodynamics written by Ingo Müller and published by Springer Science & Business Media. This book was released on 2007-07-16 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an easy to read, all-embracing history of thermodynamics. It describes the long development of thermodynamics, from the misunderstood and misinterpreted to the conceptually simple and extremely useful theory that we know today. Coverage identifies not only the famous physicists who developed the field, but also engineers and scientists from other disciplines who helped in the development and spread of thermodynamics as well.

Download or read book Foams written by J.J. Bikerman and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Foams: Theory and Industrial Applications, written by the undersigned and three collaborators and published in 1953, is still the only monograph on liquid foam in the English language. Naturally the science of foams had advanced in the intervening years so that a practically new book had to be prepared to give justice to the present state of our know ledge. This monograph has only one author and does not deal with solid foams, fire-fighting foams, and flotation, on which information is available elsewhere. The other applications of foam and its fundamental properties are reviewed at length and, whenever possible, attempts are made to reach the truth through a maze of conflicting evidence. February 1973 J. J. BIKERMAN Contents page Preface . v 1. General. Foam Films (Sections 1-22) 1 Foam Films 5 References 30 2. Formation and Structure (Sections 23-42) 33 Dispersion Methods 33 Condensation Methods 51 Foam Structure 59 References 62 3. Measurement of Foaminess (Sections 43-62) 65 Films and Bubbles 66 Foams. 76 References 94 4. Results of Foaminess Measurements (Sections 63-84) . 98 Poorly Foaming Liquids . 98 Strongly Foaming Liquids 108 Other Systems 132 References 140 5. Three-phase Foams (Sections 85-90) 149 References 157 6. Foam Drainage (Sections 91-106) 159 Experimental Data . 173 References 181 7. Mechanical Properties of Foams (Sections 107-122) 184 References 211 8. Optical Properties of Foams (Sections 123 -127) . 214 References 222 vii viii Contents 9.