Download or read book Advances in Multiphase Flow and Heat Transfer written by Lixin Cheng and published by Bentham Science Publishers. This book was released on 2010-04-21 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Multiphase flow and heat transfer have found a wide range of applications in several engineering and science fields such as mechanical engineering, chemical and petrochemical engineering, nuclear engineering, energy engineering, material engineering, ocea"
Download or read book Emerging Topics in Heat Transfer written by Qiuwang Wang and published by WIT Press. This book was released on 2013-11-06 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in ten edited chapters this book encompasses important emerging topics in heat transfer equipment, particularly heat exchangers. The chapters have all been selected by invitation only. Advances in high temperature equipment and small scale devices continue to be important as the involved heat transfer and related phenomena are often complex in nature and different mechanisms like heat conduction, convection, turbulence, thermal radiation and phase change as well as chemical reactions may occur simultaneously. The book treats various operating problems, like fouling, and highlights applications in heat exchangers and gas turbine cooling. In engineering design and development, reliable and accurate computational methods are required to replace or complement expensive and time consuming experimental trial and error work. Tremendous advancements in knowledge and competence have been achieved during recent years due to improved computational solution methods for non-linear partial differential equations, turbulence modelling advancement and developments of computers and computing algorithms to achieve efficient and rapid simulations. The chapters of the book thoroughly present such advancement in a variety of applications.
Download or read book Artificial Neural Networks written by Chi Leung Patrick Hui and published by BoD – Books on Demand. This book was released on 2011-04-11 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers 27 articles in the applications of artificial neural networks (ANN) in various disciplines which includes business, chemical technology, computing, engineering, environmental science, science and nanotechnology. They modeled the ANN with verification in different areas. They demonstrated that the ANN is very useful model and the ANN could be applied in problem solving and machine learning. This book is suitable for all professionals and scientists in understanding how ANN is applied in various areas.
Download or read book Numerical Simulation of Heat Exchangers written by W. J. Minkowycz and published by CRC Press. This book was released on 2017-04-07 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with certain aspects of material science, particularly with the release of thermal energy associated with bond breaking. It clearly establishes the connection between heat transfer rates and product quality. The editors then sharply draw the thermal distinctions between the various categories of welding processes, and demonstrate how these distinctions are translated into simulation model uniqueness. The book discusses the incorporation of radiative heat transfer processes into the simulation model.
Download or read book Proceedings of the First International Conference on Computational Intelligence and Informatics written by Suresh Chandra Satapathy and published by Springer. This book was released on 2016-11-26 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers a variety of topics which include data mining and data warehousing, high performance computing, parallel and distributed computing, computational intelligence, soft computing, big data, cloud computing, grid computing, cognitive computing, image processing, computer networks, wireless networks, social networks, wireless sensor networks, information and network security, web security, internet of things, bioinformatics and geoinformatics. The book is a collection of best papers submitted in the First International Conference on Computational Intelligence and Informatics (ICCII 2016) held during 28-30 May 2016 at JNTUH CEH, Hyderabad, India. It was hosted by Department of Computer Science and Engineering, JNTUH College of Engineering in association with Division V (Education & Research) CSI, India.
Download or read book Trends in Computational Intelligence Security and Internet of Things written by Nirmalya Kar and published by Springer Nature. This book was released on 2020-12-29 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the refereed proceedings of the Third International Conference on Computational Intelligence, Security and Internet of Things, ICCISIoT 2020, held in Agartala, India, in December 2020. Due to the COVID-19 pandemic the conference was held online. The 23 full papers and 4 short papers were carefully reviewed and selected from 113 submissions. The papers are organised according to the following topics: computational intelligence, security, and internet of things.
Download or read book Innovative Heat Exchanger Technologies Developments and Applications written by Peixin Dong and published by BoD – Books on Demand. This book was released on 2024-08-21 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the latest technological advancements in heat exchangers, providing valuable insights for researchers, engineers, and students in related fields. It investigates the latest developments and practical applications across various sectors, depicting both foundational concepts and emerging trends. The book is structured into three sections: “Phase-Change Material (PCM) Heat Exchangers”, “Modeling Methodologies”, and “Material Thermodynamics”. In Section 1, two chapters explore the principles and applications of PCMs, focusing on their role in enhancing thermal management and energy storage. In Section 2, three chapters provide an extensive review of the evolution of different heat exchanger designs and modeling methodologies, highlighting innovation-aided performance improvements. In Section 3, the final chapter investigates the practical aspects of heat transfer in thermal materials, emphasizing optimization techniques and real-world applications. Edited by Peixin Dong, a recognized expert from Hong Kong ITF-Talent Hub 2024, and Xin Sui, a senior researcher/engineer, this book serves as an essential resource for anyone involved in studying and utilizing heat exchanger technologies. Whether you are looking to understand the latest research, explore new design methodologies, or apply advanced heat transfer techniques, this volume offers the insights and knowledge required to stay at the forefront of the field. Innovative Heat Exchanger Technologies, Developments and Applications is your gateway to understanding the future of heat exchanger technology and its impact on diverse industries.
Download or read book Bulletin de L Institut International Du Froid written by and published by . This book was released on 2008 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Machine Learning Research and Application 2012 Edition written by and published by ScholarlyEditions. This book was released on 2012-12-26 with total page 1934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Machine Learning Research and Application / 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Machine Learning. The editors have built Advances in Machine Learning Research and Application / 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Machine Learning in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Advances in Machine Learning Research and Application / 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Handbook of Clean Energy Systems 6 Volume Set written by Jinyue Yan and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 4038 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.
Download or read book Heat and Mass Transfer written by and published by BoD – Books on Demand. This book was released on 2019-09-11 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat and mass transfer is the core science for many industrial processes as well as technical and scientific devices. Automotive, aerospace, power generation (both by conventional and renewable energies), industrial equipment and rotating machinery, materials and chemical processing, and many other industries are requiring heat and mass transfer processes. Since the early studies in the seventeenth and eighteenth centuries, there has been tremendous technical progress and scientific advances in the knowledge of heat and mass transfer, where modeling and simulation developments are increasingly contributing to the current state of the art. Heat and Mass Transfer - Advances in Science and Technology Applications aims at providing researchers and practitioners with a valuable compendium of significant advances in the field.
Download or read book Selected Papers from PRES 2018 written by Jiří Jaromír Klemeš and published by MDPI. This book was released on 2020-06-17 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: The depletion of natural energy resources provides evidential adverse impacts on world economy functionality. The strong requirement of a sustainable energy supply has escalated intensive research and the discovery of cleaner energy sources, as well as efficient energy management practices. In the context of a circular economy, this research not only targets the optimisation of resources utilisation at different stages but also emphasises the eco-design of products to extend production life spans. Based on this concept, this book discusses the roles of process integration approaches, renewable energy sources utilisation and design modifications in addressing the process energy and exergy efficiency improvement. The primary focus is to enhance the economic and environmental performance through process analysis, modelling and optimisation. The articles mainly show the contribution of each aspect: (a) design and numerical study for innovative energy-efficient technologies, (b) process integration—heat and power, (c) process energy efficiency or emission analysis, and (d) optimisation of renewable energy resources’ supply chain. The articles are based on the latest contribution of this journal’s Special Issues in the 21st conference entitled “Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES)”. This book is complemented with an editorial review to highlight the broader state-of-the-art development.
Download or read book CRC Handbook of Thermal Engineering written by Raj P. Chhabra and published by CRC Press. This book was released on 2017-11-08 with total page 1649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CRC Handbook of Thermal Engineering, Second Edition, is a fully updated version of this respected reference work, with chapters written by leading experts. Its first part covers basic concepts, equations and principles of thermodynamics, heat transfer, and fluid dynamics. Following that is detailed coverage of major application areas, such as bioengineering, energy-efficient building systems, traditional and renewable energy sources, food processing, and aerospace heat transfer topics. The latest numerical and computational tools, microscale and nanoscale engineering, and new complex-structured materials are also presented. Designed for easy reference, this new edition is a must-have volume for engineers and researchers around the globe.
Download or read book Radiation Heat Transfer written by J. Robert Mahan and published by John Wiley & Sons. This book was released on 2002-06-03 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Wärmestrahlung spielt eine zentrale Rolle in der Natur und in vielfältigen technischen Systemen (zum Beispiel in Wärmekraftanlagen, Kühlaggregaten, elektronischen Schaltungen usw.) - dieses Buch erläutert die theoretischen Grundlagen mit starker Betonung praktischer Konsequenzen - hervorzuheben ist die Erklärung der Monte-Carlo-/Raytrace-Methode (momentan Stand der Technik)
Download or read book Principles of finned tube heat exchanger design for enhanced heat transfer written by Friedrich Frass and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Artificial Neural Networks for Engineering Applications written by Alma Y Alanis and published by Academic Press. This book was released on 2019-02-13 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Neural Networks for Engineering Applications presents current trends for the solution of complex engineering problems that cannot be solved through conventional methods. The proposed methodologies can be applied to modeling, pattern recognition, classification, forecasting, estimation, and more. Readers will find different methodologies to solve various problems, including complex nonlinear systems, cellular computational networks, waste water treatment, attack detection on cyber-physical systems, control of UAVs, biomechanical and biomedical systems, time series forecasting, biofuels, and more. Besides the real-time implementations, the book contains all the theory required to use the proposed methodologies for different applications.
Download or read book Feature Selection for Knowledge Discovery and Data Mining written by Huan Liu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: As computer power grows and data collection technologies advance, a plethora of data is generated in almost every field where computers are used. The com puter generated data should be analyzed by computers; without the aid of computing technologies, it is certain that huge amounts of data collected will not ever be examined, let alone be used to our advantages. Even with today's advanced computer technologies (e. g. , machine learning and data mining sys tems), discovering knowledge from data can still be fiendishly hard due to the characteristics of the computer generated data. Taking its simplest form, raw data are represented in feature-values. The size of a dataset can be measUJ·ed in two dimensions, number of features (N) and number of instances (P). Both Nand P can be enormously large. This enormity may cause serious problems to many data mining systems. Feature selection is one of the long existing methods that deal with these problems. Its objective is to select a minimal subset of features according to some reasonable criteria so that the original task can be achieved equally well, if not better. By choosing a minimal subset offeatures, irrelevant and redundant features are removed according to the criterion. When N is reduced, the data space shrinks and in a sense, the data set is now a better representative of the whole data population. If necessary, the reduction of N can also give rise to the reduction of P by eliminating duplicates.