Download or read book Solar and Heat Pump Systems for Residential Buildings written by Jean-Christophe Hadorn and published by John Wiley & Sons. This book was released on 2015-09-08 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of heat pumps and solar components is a recent development and has great potential for improving the energy efficiency of house and hot water heating systems. As a consequence, it can enhance the energy footprint of a building substantially. This work compares different systems, analyses their performance and illustrates monitoring techniques. It helps the reader to design, simulate and assess solar and heat pump systems. Good examples of built systems are discussed in detail and advice is given on how to design the most efficient system. This book is the first one about this combination of components and presents the state of the art of this technology. It is based on a joint research project of two programmes of the International Energy Agency: the Solar Heating and Cooling Programme (SHC) and the Heat Pump Programme. More than 50 experts from 13 countries have participated in this research.
Download or read book Heat Pumps for the Home written by John Cantor and published by The Crowood Press. This book was released on 2020-11-23 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, heat pumps have emerged as a promising new form of technology with a relatively low environmental impact. Moreover, they have presented householders with an opportunity to reduce their heating bills. Heat pumps can heat a building by 'pumping' heat from either the ground or the air outside: an intriguing process which utilizes principles that are somewhat analogous to those employed in the domestic refrigerator. Armed with the practical information contained in these pages, homeowners will have the necessary knowledge to take advantage of this potentially low-carbon technology to heat their properties. Now in an updated new edition, Heat Pumps for the Home describes what a heat pump is, how it works, the different methods of pumping heat and the importance of an appropriate and well-planned installation. It also provides you with the information that you need in order to make up your own mind about whether a heat pump might be appropriate to your own circumstances, and also demonstrates what you need to do to in order to make the system work efficiently.
Download or read book Geothermal Heat Pumps written by Karl Ochsner and published by Taylor & Francis. This book was released on 2012-04-27 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Heat Pumps is the most comprehensive guide to the selection, design and installation of geothermal heat pumps available. This leading manual presents the most recent information and market developments in order to put any installer, engineer or architect in the position to design, select and install a domestic geothermal heat pump system. Internationally respected expert Karl Ochsner presents the reasons to use heat pumps, introduces basic theory and reviews the wide variety of available heat pump models.
Download or read book Advances in Ground Source Heat Pump Systems written by Simon Rees and published by Woodhead Publishing. This book was released on 2016-05-13 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ground-Source Heat Pump Systems relates the latest information on source heat pumps (GSHPs), the types of heating and/or cooling systems that transfer heat from, or to, the ground, or, less commonly, a body of water. As one of the fastest growing renewable energy technologies, they are amongst the most energy efficient systems for space heating, cooling, and hot water production, with significant potential for a reduction in building carbon emissions. The book provides an authoritative overview of developments in closed loop GSHP systems, surface water, open loop systems, and related thermal energy storage systems, addressing the different technologies and component methods of analysis and optimization, among other subjects. Chapters on building integration and hybrid systems complete the volume. - Provides the geological aspects and building integration covered together in one convenient volume - Includes chapters on hybrid systems - Presents carefully selected chapters that cover areas in which there is significant ongoing research - Addresses geothermal heat pumps in both heating and cooling modes
Download or read book Heat Pumps for Heating and Cooling Homes written by and published by . This book was released on 1966 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Pumps and Electric Heating written by E. R. Ambrose and published by John Wiley & Sons. This book was released on 1966 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Pumps written by United States. Department of Energy and published by . This book was released on 1979 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Pumps for Cold Climate Heating written by Hui Huang and published by CRC Press. This book was released on 2020-05-01 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air source heat pumps are mainly used for space heating, and have the advantages of environmental protection, energy saving, and comfort. Written by leading heat pump technology expert Hui Huang, this book summarizes the research and applications of variable volume ratio two-stage vapor compression air source heat pump technology, and its use in cold climate regions. This book can be used for reference by scientific researchers and engineers engaged in research on air source heat pump technology, product development and popularization; and by energy management and policy researchers. It will also be of value to undergraduate and graduate students studying these areas of technology.
Download or read book Heating and Cooling with a Heat Pump written by Canada. Office of Energy Efficiency and published by . This book was released on 2004 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: Begins with a general description of heat pumps and how they work, their terminology, and their standards. This is followed by details on air- and ground-source heat pumps, including their operation, components, energy efficiency considerations, sizing and design considerations, installation, benefits, maintenance, operating costs, and life expectancy. Heating energy costs are then compared for heat pump and electric heating systems at various locations in Canada. Related equipment such as supplementary heating systems, thermostats, and heat distribution systems is also reviewed. Finally, answers are provided to some commonly asked questions about heat pumps.
Download or read book Principles of Home Inspection Air conditioning heat pumps written by Carson Dunlop and published by Dearborn Real Estate. This book was released on 2003 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book is designed to provide you with knowledge and skills you need to inspect air conditioning systems and heat pumps like an experienced, professional home inspector.
Download or read book Heat Pumps for the Home written by John Cantor and published by Crowood Press (UK). This book was released on 2020-07-30 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, heat pumps have emerged as a promising new form of technology with a relatively low environmental impact. Moreover, they have presented householders with an opportunity to reduce their heating bills. Heat pumps can heat a building by 'pumping' heat from either the ground or the air outside: an intriguing process which utilizes principles that are somewhat analogous to those employed in the domestic refrigerator. Armed with the practical information contained in these pages, homeowners will have the necessary knowledge to take advantage of this potentially low-carbon technology to heat their properties. Now in an updated new edition, Heat Pumps for the Home describes what a heat pump is, how it works, the different methods of pumping heat and the importance of an appropriate and well-planned installation. It also provides you with the information that you need in order to make up your own mind about whether a heat pump might be appropriate to your own circumstances, and also demonstrates what you need to do to in order to make the system work efficiently.
Download or read book Vapor Compression Heat Pumps with Refrigerant Mixtures written by Reinhard Radermacher and published by CRC Press. This book was released on 2005-06-23 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amidst tightening requirements for eliminating CFC's, HCFC's, halons, and HFC's from use in air conditioning and heat pumps, the search began for replacements that are environmentally benign, non-flammable, and similar to the banned refrigerants in system-level behavior. Refrigerant mixtures are increasingly used as working fluids because they demo
Download or read book Heat Pumps written by Randy F. Petit (Sr.) and published by Ingram. This book was released on 2011-09-30 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 78-page book provides a comprehensive overview of the heat pump system, it¿s operations and principles. The heat pumps covered in this book are basic systems. The intent of the book is to offer technicians information to build upon to enhance their knowledge of the air conditioning and heating field, specifically, heat pumps. Before installing or servicing a heat pump system, the technician must have proper training and knowledge of air conditioning/refrigeration theory, principles and operation. New highly efficient equipment heat pump systems using HFC refrigerant (R-410A) are being sold and installed. These systems pose new demands for installers and service technicians. A heat pump¿s efficiency can be greatly diminished, regardless of the type of refrigerant, if it is not properly installed, serviced and maintained.
Download or read book Geothermal Heat Pump and Heat Engine Systems written by Andrew D. Chiasson and published by John Wiley & Sons. This book was released on 2016-07-08 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique approach to the study of geothermal energy systems This book takes a unique, holistic approach to the interdisciplinary study of geothermal energy systems, combining low, medium, and high temperature applications into a logical order. The emphasis is on the concept that all geothermal projects contain common elements of a "thermal energy reservoir" that must be properly designed and managed. The book is organized into four sections that examine geothermal systems: energy utilization from resource and site characterization; energy harnessing; energy conversion (heat pumps, direct uses, and heat engines); and energy distribution and uses. Examples are provided to highlight fundamental concepts, in addition to more complex system design and simulation. Key features: Companion website containing software tools for application of fundamental principles and solutions to real-world problems. Balance of theory, fundamental principles, and practical application. Interdisciplinary treatment of the subject matter. Geothermal Heat Pump & Heat Engine Systems: Theory and Practice is a unique textbook for Energy Engineering and Mechanical Engineering students as well as practicing engineers who are involved with low-enthalpy geothermal energy systems.
Download or read book Heat Pumps written by Walter Grassi and published by Springer. This book was released on 2017-08-11 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text describes the main features of currently available heat pumps, focusing on system operation and interactions with external heat sources. In fact, before choosing a heat pump, several aspects must be assessed in detail: the actual climate of the installation site, the building’s energy requirements, the heating system, the type of operation etc. After discussing the general working principles, the book describes the main components of compression machines – for EHPs, GHPs and CO2 heat pumps. It then addresses absorption heat pumps and provides additional details on the behavior of two-fluid mixtures. The book presents a performance comparison for the different types, helping designers choose the right one for their needs, and discusses the main refrigerants. Notes on helpful additional literature, websites and videos, also concerning relevant European regulations, round out the coverage. This book will be of interest to all engineers and technicians whose work involves heat pumps. It will also benefit students in energy engineering degree programs who want to deepen their understanding of heat pumps.
Download or read book Install a New Heat Pump in the House written by Rene Schilling and published by Independently Published. This book was released on 2024-01-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing heat pumps into the home is an important step towards a sustainable and efficient energy supply. A heat pump is a device that takes energy from the surrounding air, ground or groundwater and converts it into usable heat for heating and hot water. Compared to conventional heating systems based on fossil fuels, heat pumps are more environmentally friendly and energy efficient. One of the main advantages of heat pumps is their energy efficiency. Unlike conventional heating systems, which burn energy from fossil fuels such as oil or gas, heat pumps work with electrical energy. This means that for every kilowatt hour of electricity consumed by a heat pump, three to four kilowatt hours of usable heat can be generated.
Download or read book An Introduction to Thermogeology written by David Banks and published by John Wiley & Sons. This book was released on 2012-05-30 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative guide provides a basis for understanding theemerging technology of ground source heating and cooling. It equipsengineers, geologists, architects, planners and regulators with thefundamental skills needed to manipulate the ground's huge capacityto store, supply and receive heat, and to implement technologies(such as heat pumps) to exploit that capacity for space heating andcooling. The author has geared the book towards understanding groundsource heating and cooling from the ground side (the geologicalaspects), rather than solely the building aspects. Heexplains the science behind thermogeology and offers practicalguidance on different design options. An Introduction to Thermogeology: ground source heating andcooling is aimed primarily at professionals whose skill areasimpinge on the emerging technology of ground source heating andcooling. They will be aware of the importance of the technology andwish to rapidly acquire fundamental theoretical understanding anddesign skills. This second edition has been thoroughly updated and expanded tocover new technical developments and now includes end-of-chapterstudy questions to test the reader's understanding.
