Download or read book Heat Pumps written by Walter Grassi and published by Springer. This book was released on 2017-08-11 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text describes the main features of currently available heat pumps, focusing on system operation and interactions with external heat sources. In fact, before choosing a heat pump, several aspects must be assessed in detail: the actual climate of the installation site, the building’s energy requirements, the heating system, the type of operation etc. After discussing the general working principles, the book describes the main components of compression machines – for EHPs, GHPs and CO2 heat pumps. It then addresses absorption heat pumps and provides additional details on the behavior of two-fluid mixtures. The book presents a performance comparison for the different types, helping designers choose the right one for their needs, and discusses the main refrigerants. Notes on helpful additional literature, websites and videos, also concerning relevant European regulations, round out the coverage. This book will be of interest to all engineers and technicians whose work involves heat pumps. It will also benefit students in energy engineering degree programs who want to deepen their understanding of heat pumps.
Download or read book Ground Source Heat Pumps written by Ioan Sarbu and published by Academic Press. This book was released on 2015-10-01 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground-Source Heat Pumps presents the theory and some of the most recent advances of GSHPs and their implementation in the heating/cooling system of buildings. The authors explore the thermodynamic cycle with calculation, operation regimes and economic indicators and GHG emissions of a vapor compression heat pump. They go on to examine substitution strategies of non-ecological refrigerants and types of compressors and heat pumps, before delving into the different GSHP systems, as well as their compared economic, energy and environmental performances using classical and optimized adjustment for various operating modes. Surface water heat pumps and ground water heat pumps are covered, and special focus is given to both vertical and horizontal ground-coupled heat pump systems, for which modelling and simulation is discussed, and experimental systems are described. Due to its advanced approach to the subject, this book will be especially valuable for researchers, graduate students and academics, and as reference for engineers and specialists in the varied domains of building services. Explores fundamentals and state-of-the-art research, including ground-coupled heat pump (GCHP) systems. Includes performance assessment and comparison for different types of GSHP, numerical simulation models, practical applications of GSHPs with details on the renewable energy integration, information on refrigerants, and economic analysis.
Download or read book Refrigeration Air Conditioning and Heat Pumps written by G F Hundy and published by Butterworth-Heinemann. This book was released on 2016-03-07 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refrigeration, Air Conditioning and Heat Pumps, Fifth Edition, provides a comprehensive introduction to the principles and practice of refrigeration. Clear and comprehensive, it is suitable for both trainee and professional HVAC engineers, with a straightforward approach that also helps inexperienced readers gain a comprehensive introduction to the fundamentals of the technology. With its concise style and broad scope, the book covers most of the equipment and applications professionals will encounter. The simplicity of the descriptions helps users understand, specify, commission, use, and maintain these systems. It is a must-have text for anyone who needs thorough, foundational information on refrigeration and air conditioning, but without textbook pedagogy. It includes detailed technicalities or product-specific information. New material to this edition includes the latest developments in refrigerants and lubricants, together with updated information on compressors, heat exchangers, liquid chillers, electronic expansion valves, controls, and cold storage. In addition, efficiency, environmental impact, split systems, retail refrigeration (supermarket systems and cold rooms), industrial systems, fans, air infiltration, and noise are also included. - Full theoretical and practical treatment of current issues and trends in refrigeration and air conditioning technology - Meets the needs of industry practitioners and system designers who need a rigorous, but accessible reference to the latest developments in refrigeration and AC that is supported by coverage at a level not found in typical course textbooks - New edition features updated content on refrigerants, microchannel technology, noise, condensers, data centers, and electronic control
Download or read book Adsorption Heat Pumps written by Daniel B. Boman and published by Springer Nature. This book was released on 2021-05-21 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume introduces the fundamentals of adsorption heat pumps, beginning with the simplest cycle and building to the most complex. Selection of adsorbents and refrigerants, design of adsorption beds and auxiliary heat exchangers, and applications for different designs are all discussed. The book educates engineering students, engineers, and researchers about an environmentally friendly alternative to vapor compression refrigeration systems promising for many applications. The authors cover thermodynamic cycles, working materials for the cycles, and aspects of designing and modeling adsorption heat pumps. Elucidates the various applications of adsorption heat pumps; Illustrates modeling techniques for quickly screening new working materials early in their development; Provides comprehensive review of cycle types, with discussion of the applications for which they are best suited; Appropriate for graduate courses on advanced thermodynamics, design of thermal systems, sustainable energy technology, refrigeration technologies, and thermal control of electronics.
Download or read book Heat Pump Fundamentals written by J. Berghmans and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the texts of the lectures which were givenat the Nato Advanced Study Institute on Advanced Heat Pumns which was heldat Espinho, Portugal in September 1980. Aprevious NATO Advanced Study Institute on the topic of heat pumps had been held in 1975. The significance of heat pumps with respect to energy conservation was the main topic of this Institute. In 1980it was felt that considerable research had to be done in order to be able to produce more energy efficient, less costly and more widely ap~licableheat ~umos. This requires a good understanding of the functioning of the types of heat pumps available. The simultaneous coverage of the basic funda mentals of heat pumps of different drive in one lecture series therefore was the goal of the 1980 Advanced Study Institute. Only a few lectures were devoted to heat pump applications. The lectures on heat pump applications were intended to ~ive only a short overview. They were supplemented by lectures on the latest developments on vapour compression as well as sorption systems.
Download or read book Vapor Compression Heat Pumps with Refrigerant Mixtures written by Reinhard Radermacher and published by CRC Press. This book was released on 2005-06-23 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amidst tightening requirements for eliminating CFC's, HCFC's, halons, and HFC's from use in air conditioning and heat pumps, the search began for replacements that are environmentally benign, non-flammable, and similar to the banned refrigerants in system-level behavior. Refrigerant mixtures are increasingly used as working fluids because they demo
Download or read book Fundamentals of Geothermal Heat Pump Systems written by Louis Lamarche and published by Springer Nature. This book was released on 2023-10-05 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Geothermal Heat Pump Systems: Design and Application is written for upper-level undergraduate and graduate courses in renewable energy and heat transfer. This classroom-tested text covers ground heat exchanger modeling, secondary loop ground-source system design, pumping energy, thermal response testing, commercial building applications, and horizontal and groundwater ground heat exchangers. The book is oriented to practical applications, including the economic analysis of ground source heat pump (GSHP) systems, but more theoretical sections are provided covering research-related geothermal applications. Chapters on heat transfer fundamentals and heat pump concepts are included for readers less familiar with thermal engineering concepts. A chapter covering the economic analysis of GSHP systems is also included. All of the examples and problems in the book are solved using the open-source Python programming language. The book will provide students in geothermal energy courses with a solid understanding of the subject. It will also be a valuable reference for professionals working in the field of renewable energy.
Download or read book Heating and Cooling Essentials written by Jerry Killinger and published by Goodheart-Wilcox Publisher. This book was released on 1998-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activities are designed to help students review content and develop critical thinking skills. A wide variety of activities is provided for various learning styles.
Download or read book Heat Pumps for Cold Climate Heating written by Hui Huang and published by CRC Press. This book was released on 2020-05-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air source heat pumps are mainly used for space heating, and have the advantages of environmental protection, energy saving, and comfort. Written by leading heat pump technology expert Hui Huang, this book summarizes the research and applications of variable volume ratio two-stage vapor compression air source heat pump technology, and its use in cold climate regions. This book can be used for reference by scientific researchers and engineers engaged in research on air source heat pump technology, product development and popularization; and by energy management and policy researchers. It will also be of value to undergraduate and graduate students studying these areas of technology.
Download or read book Absorption Chillers and Heat Pumps written by Keith E. Herold and published by CRC Press. This book was released on 2016-04-21 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significantly revised and updated since its first publication in 1996, Absorption Chillers and Heat Pumps, Second Edition discusses the fundamental physics and major applications of absorption chillers. While the popularity of absorption chillers began to dwindle in the United States in the late 1990's, a shift towards sustainability, green buildin
Download or read book Geothermal Heat Pump and Heat Engine Systems written by Andrew D. Chiasson and published by John Wiley & Sons. This book was released on 2016-09-19 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique approach to the study of geothermal energy systems This book takes a unique, holistic approach to the interdisciplinary study of geothermal energy systems, combining low, medium, and high temperature applications into a logical order. The emphasis is on the concept that all geothermal projects contain common elements of a "thermal energy reservoir" that must be properly designed and managed. The book is organized into four sections that examine geothermal systems: energy utilization from resource and site characterization; energy harnessing; energy conversion (heat pumps, direct uses, and heat engines); and energy distribution and uses. Examples are provided to highlight fundamental concepts, in addition to more complex system design and simulation. Key features: Companion website containing software tools for application of fundamental principles and solutions to real-world problems. Balance of theory, fundamental principles, and practical application. Interdisciplinary treatment of the subject matter. Geothermal Heat Pump & Heat Engine Systems: Theory and Practice is a unique textbook for Energy Engineering and Mechanical Engineering students as well as practicing engineers who are involved with low-enthalpy geothermal energy systems.
Download or read book Transcritical CO2 Heat Pump written by Xin-rong Zhang and published by John Wiley & Sons. This book was released on 2021-05-10 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely and comprehensive introduction to CO2 heat pump theory and usage A comprehensive introduction of CO2 application in heat pump, authored by leading scientists in the field CO2 is a hot topic due to concerns over global warming and the 'greenhouse effect'. Its disposal and application has attracted considerable research and governmental interest Explores the basic theories, devices, systems and cycles and real application designs for varying applications, ensuring comprehensive coverage of a current topic CO2 heat transfer has everyday applications including water heaters, air-conditioning systems, residential and commercial heating systems, and cooling systems
Download or read book Heat Pump Fundamentals written by Michael Siegfried Martus and published by . This book was released on 1947 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Solar Heating written by Sheet Metal and Air Conditioning Contractors' National Association (U.S.) and published by . This book was released on 1978 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Exergy Analysis of Heating Refrigerating and Air Conditioning written by Ibrahim Dincer and published by Academic Press. This book was released on 2015-08-08 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improve and optimize efficiency of HVAC and related energy systems from an exergy perspective. From fundamentals to advanced applications, Exergy Analysis of Heating, Air Conditioning, and Refrigeration provides readers with a clear and concise description of exergy analysis and its many uses. Focusing on the application of exergy methods to the primary technologies for heating, refrigerating, and air conditioning, Ibrahim Dincer and Marc A. Rosen demonstrate exactly how exergy can help improve and optimize efficiency, environmental performance, and cost-effectiveness. The book also discusses the analysis tools available, and includes many comprehensive case studies on current and emerging systems and technologies for real-world examples. From introducing exergy and thermodynamic fundamentals to presenting the use of exergy methods for heating, refrigeration, and air conditioning systems, this book equips any researcher or practicing engineer with the tools needed to learn and master the application of exergy analysis to these systems. - Explains the fundamentals of energy/exergy for practitioners/researchers in HVAC&R fields for improving efficiency - Covers environmental assessments and economic evaluations for a well-rounded approach to the subject - Includes comprehensive case studies on both current and emerging systems/technologies - Provides examples from a range of applications – from basic HVAC&R to more diverse processes such as industrial heating/cooling, cogeneration and trigeneration, and thermal storage
Download or read book Heat Pumps written by Kazimierz Brodowicz and published by Elsevier. This book was released on 2013-10-22 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat pumps and related technology are in widespread use in industrial processes and installations. This book presents a unified, comprehensive and systematic treatment of the design and operation of both compression and sorption heat pumps. Heat pump thermodynamics, the choice of working fluid and the characteristics of low temperature heat sources and their application to heat pumps are covered in detail.Economic aspects are discussed and the extensive use of the exergy concept in evaluating performance of heat pumps is a unique feature of the book. The thermodynamic and chemical properties of certain new working fluids and sorbents are also explored.There are considerable pressures on those involved in the use of heat pumps to achieve energy savings and this presents a challenging task in today's industrial climate. This book provides many examples of such energy savings such as the use of large heat pump units utilising various low temperature industrial waste heat sources. Heat Pumps is illustrated throughout by specific solutions as applied worldwide. The subject area is approached logically, covering both design and calculation methods, and is oriented towards the needs of the process user. The treatment given to the selection of working fluids should be compulsory reading. - Chemical Engineer, June 1994
Download or read book Geothermal Heating and Cooling written by Stephen P. Kavanaugh and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Heating and Cooling is a complete revision of Ground-Source Heat Pumps: Design of Geothermal Systems for Commercial and Institutional Buildings, which is recognized as the primary reference for nonresidential ground-source heat pump (GSHP) installations. This new work takes advantage of the many lessons learned since the time of the original publication, when GSHPs were primarily residential applications. Many improvements have evolved, and performance data, both positive and negative, is now available to guide the development of best practices. This essential guide for HVAC design engineers, design-build contractors, GSHP subcontractors, and energy/construction managers also provides building owners and architects with insights into characteristics of quality engineering firms and the information that should be provided by design firms competing for GSHP projects.This revision draws on new ASHRAE and industry research in critical areas, as well as measured data from long-term installations and optimized installation practices used by high-production GSHP contractors. Nearly all chapters and appendices were completely rewritten, and they include coverage of closed-loop ground (ground-coupled), groundwater, and surface-water systems plus GSHP equipment and piping. Additional information on site characterization has been added, including a new hydrogeological chapter. Another new chapter contains results of recent field studies, energy and demand characteristics, and updated information to optimize GSHP system cost. While other publications deal primarily with ground-coupled heat pumps, this text includes detailed coverage of groundwater, surface-water, and GSHP costs.Tables, graphs, and equations are provided in both Inch-Pound (I-P) and International System (SI) units. As a bonus, supplemental Microsoft® Excel® macro-enabled spreadsheets for a variety of GSHP calculations accompany the text.
