Download or read book Thermosyphons and Heat Pipes Theory and Applications written by Marcia Barbosa Henriques Mantelli and published by Springer Nature. This book was released on 2020-12-22 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about theories and applications of thermosyphons and heat pipes. It discusses the physical phenomena that drive the working principles of thermosyphons, heat pipes and related technologies. Many applications are discussed in this book, including: rationalizing energy use in industry, solar heating of houses, decrease of water consumption in cooling towers, improvement of the thermal performance of industrial and domestic ovens and driers and new devices for heating stored oil and gas in petrochemical plants. Besides, the book also presents heat pipe and thermosyphon technologies for the thermal management of electronic devices, from portable equipment to airplanes and satellites. The first part of the book explores the physical working principles of thermosyphons and heat pipes, by explaining current heat transfer and thermal resistance models. The author discusses the new heat pipe and thermosyphon technologies that have been developed in the last decade for solving a myriad of electronic, environment and industrial heat and thermal problems. The focus then shifts to the thermosyphon technology applications, and the models and simulations necessary for each application – including vehicles, domestic appliances, water conservation technologies and the thermal control of houses and other structures. Finally, the book looks at the new technologies for heat pipes (mini/micro) and similar devices (loop heat pipes), including new models for prediction of the thermal performance of porous media. This book inspires engineers to adopt innovative approaches to heat transfer problems in equipment and components by applying thermosyphon and heat pipe technologies. It is also of interest to researchers and academics working in the heat transfer field, and to students who wish to learn more about heat transfer devices.

Download or read book Handbook of Thermal Science and Engineering written by and published by Springer. This book was released on 2018-07-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook provides researchers, faculty, design engineers in industrial R&D, and practicing engineers in the field concise treatments of advanced and more-recently established topics in thermal science and engineering, with an important emphasis on micro- and nanosystems, not covered in earlier references on applied thermal science, heat transfer or relevant aspects of mechanical/chemical engineering. Major sections address new developments in heat transfer, transport phenomena, single- and multiphase flows with energy transfer, thermal-bioengineering, thermal radiation, combined mode heat transfer, coupled heat and mass transfer, and energy systems. Energy transport at the macro-scale and micro/nano-scales is also included. The internationally recognized team of authors adopt a consistent and systematic approach and writing style, including ample cross reference among topics, offering readers a user-friendly knowledgebase greater than the sum of its parts, perfect for frequent consultation. The Handbook of Thermal Science and Engineering is ideal for academic and professional readers in the traditional and emerging areas of mechanical engineering, chemical engineering, aerospace engineering, bioengineering, electronics fabrication, energy, and manufacturing concerned with the influence thermal phenomena.

Download or read book Heat Pipes and Thermosyphons for Heat Recovery written by David Anthony Reay and published by . This book was released on 1981 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Pipes and Thermosyphons for Heat Recovery written by International Heat Pipe Conference Staff and published by . This book was released on 1982-10-01 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Heat Pipe Technology written by D. A. Reay and published by Elsevier. This book was released on 2015-11-24 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Pipe Technology covers the proceedings of the Fourth International Heat Pipe Conference, held at the Royal Aeronautical Society in London, United Kingdom on September 7-10, 1981. This conference focuses on the advances in heat pipe and thermosyphon technology. This book is organized into seven parts encompassing 69 chapters. The first part describes the design and features of heat pipes, as well as their terrestrial and spacecraft applications. The subsequent parts deal with the performance, heat transfer and hydrodynamic properties, and entrainment of thermosyphon and heat pipes, with an emphasis on their application to energy conservation. The last parts discuss the heat pipe theory, and the experimental techniques and life tests of heat pipes.

Download or read book Heat Pipes written by P. Dunn and published by Elsevier. This book was released on 2016-04-06 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is approximately 10 years since the Third Edition of Heat Pipes was published and the text is now established as the standard work on the subject. This new edition has been extensively updated, with revisions to most chapters. The introduction of new working fluids and extended life test data have been taken into account in chapter 3. A number of new types of heat pipes have become popular, and others have proved less effective. This is reflected in the contents of chapter 5. Heat pipes are employed in a wide range of applications, including electronics cooling, diecasting and injection moulding, heat recovery and energy conservation, de-icing and manufacturing process temperature control, and chapter 7 discusses some of the latest uses, while retaining full data on those established for many years. Appendices have been updated, as appropriate.

Download or read book Design And Technology Of Heat Pipes For Cooling And Heat Exchange written by Cal Silverstein and published by CRC Press. This book was released on 2020-03-13 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the characteristics of heat pipes under steady-state and transient operating conditions. It emphasizes the physical aspects of heat pipe behavior and develops design formulas on the basis of mathematical models and empirical observation. The author take a tutorial approach, presenting information on the application of heat pipe technology, design methods, and data to heat pipe cooling and heat exchange requirements. He provides the nonspecialist with sufficient understanding of heat pipe technology to appreciate and assess its application potential, while also meeting the needs of the experienced heat pipe designer and researcher.

Download or read book Low Temperature and Cryogenic Refrigeration written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refrigeration plays a prominent role in our everyday lives, and cryogenics plays a major role in medical science, space technology and the cooling of low-temperature electronics. This volume contains chapters on basic refrigeration systems, non-compression refrigeration and cooling, and topics related to global environmental issues, alternative refrigerants, optimum refrigerant selection, cost-quality optimization of refrigerants, advanced thermodynamics of reverse-cycle machines, applications in medicine, cryogenics, heat pipes, gas-solid absorption refrigeration, multisalt resorption heat pumps, cryocoolers, thermoacoustic refrigeration, cryogenic heat transfer and enhancement and other topics covering theory, design, and applications, such as pulse tube refrigeration, which is the most efficient of all cryocoolers and can be used in space missions.

Download or read book Heat Pipes written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-10-01 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Pipes, Sixth Edition, takes a highly practical approach to the design and selection of heat pipes, making it an essential guide for practicing engineers and an ideal text for postgraduate students.This new edition has been revised to include new information on the underlying theory of heat pipes and heat transfer, and features fully updated applications, new data sections, and updated chapters on design and electronics cooling. The book is a useful reference for those with experience and an accessible introduction for those approaching the topic for the first time. Contains all information required to design and manufacture a heat pipe Suitable for use as a professional reference and graduate text Revised with greater coverage of key electronic cooling applications

Download or read book Heat Pipe Science And Technology written by Amir Faghri and published by Global Digital Press. This book was released on 1995-03 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents basic and advanced techniques in the analytical and numerical modeling of various heat pipe systems under a variety of operating conditions and limitations. It describes the variety of complex and coupled processes of heat and mass transfer in heat pipes. The book consists of fourteen chapters, two appendices, and over 400 illustrations, along with numerous references and a wide variety of technical data on heat pipes.

Download or read book Bringing Thermoelectricity into Reality written by Patricia Aranguren and published by BoD – Books on Demand. This book was released on 2018-07-11 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The disproportionate use of fossil fuels has turned into a serious environmental issue. Thus, we are encountering one of the biggest challenges of the twenty-first century, satisfying the energy demand with respect to the environment. Thermoelectricity is an emerging technology, which contributes to reducing the impact of the use of traditional technologies, harvesting the waste heat, and eliminating the use of refrigerants. The book Bringing Thermoelectricity into Reality covers the current thermoelectric investigations: the study of novel thermoelectric materials, the development of computational models, the design of proper assemblies, and the optimization of thermal designs, as well as novel thermoelectric generators, coolers, and heating applications. This book looks for the definitive thermoelectric applications applied to everyday life.

Download or read book Heat Pipe Design and Technology written by Bahman Zohuri and published by Springer. This book was released on 2016-04-28 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a practical study of modern heat pipe engineering, discussing how it can be optimized for use on a wider scale. An introduction to operational and design principles, this book offers a review of heat and mass transfer theory relevant to performance, leading into and exploration of the use of heat pipes, particularly in high-heat flux applications and in situations in which there is any combination of non-uniform heat loading, limited airflow over the heat generating components, and space or weight constraints. Key implementation challenges are tackled, including load-balancing, materials characteristics, operating temperature ranges, thermal resistance, and operating orientation. With its presentation of mathematical models to calculate heat transfer limitations and temperature gradient of both high- and low-temperature heat pipes, the book compares calculated results with the available experimental data. It also includes a series of computer programs developed by the author to support presented data, aid design, and predict performance.

Download or read book Heat Pipes written by P. D. Dunn and published by Elsevier. This book was released on 2012-12-02 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive, up-to-date coverage of the theory, design and manufacture of heat pipes and their applications. This latest edition has been thoroughly revised, up-dated and expanded to give an in-depth coverage of the new developments in the field. Significant new material has been added to all the chapters and the applications section has been totally rewritten to ensure that topical and important applications are appropriately emphasised. The bibliography has been considerably enlarged to incorporate much valuable new information. Thus readers of the previous edition, which has established itself as the standard text on the subject, will find much additional data of interest whilst new readers will find the vast amount of useful data included in the appendices an indispensable source of reference.

Download or read book Functionality Advancements and Industrial Applications of Heat Pipes written by Bahman Zohuri and published by Academic Press. This book was released on 2020-03-24 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionality, Advancements and Industrial Applications of Heat Pipes introduces heat pipe technologies and highlights a variety of applications for passive thermal control. The book begins with a thorough analysis of heat pipe infrastructure, including principles of operation, temperature limits, reliability and lessons learned from worked examples and case studies. It also presents a concise design guideline for the assembly of heat pipes. The second part moves on to consider a variety of modern day applications for the heat pipe principles discussed, covering nuclear and solar thermal energy engineering facilities as well as applications in space, in the sea and in the air. A final section works through manufacturing elements of different types of heat pipe to ensure they are well maintained and remain fully operational. This section includes the cleaning of parts, the assembly of the heat pipe, an analysis of gas blockages and how to deal with them, as well as performance versification. Analyzes a wide variety of heat pipes used in various settings, including constant-conductance heat pipes, loop heat pipes and wrap around heat pipes Considers applications at sea, in the air, on land and in space, including the nuclear and solar energy industries, heat pipes in spacecraft and heat pipe reactors Includes a heat pipe assembly and design guide, as well as an analysis of lessons learned from different case studies

Download or read book Heat Pipes and Solid Sorption Transformations written by L.L Vasiliev and published by CRC Press. This book was released on 2013-05-08 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing clean energy and utilizing waste energy has become increasingly vital. Research targeting the advancement of thermally powered adsorption cooling technologies has progressed in the past few decades, and the awareness of fuel cells and thermally activated (heat pipe heat exchangers) adsorption systems using natural refrigerants and/or alternatives to hydrofluorocarbon-based refrigerants is becoming ever more important. Heat Pipes and Solid Sorption Transformations: Fundamentals and Practical Applications concentrates on state-of-the-art adsorption research and technologies for relevant applications based on the use of efficient heat transfer devices—heat pipe and two-phase thermosyphons—with the objectives of energy efficiency and sustainability. This book also discusses heat pipe thermal control as it relates to spacecraft applications. The first few chapters of Heat Pipes and Solid Sorption Transformations: Fundamentals and Practical Applications focus on heating and cooling, the principles of adsorption, adsorption dynamics, and the availability of three-phase boundaries. Other chapters cover successful heat pipe applications and heat-pipe-based thermal control of fuel cells, solid sorption transformers, and electronic components and air-condition devices. The final chapters summarize the achievements in the field of heat and mass transfer study in heat pipes with variable properties such as gas loaded heat pipes. Several configurations of thermosyphons are showcased, with suggested applications. A number of examples of equipment using the thermosyphon technology are presented and, in the final chapter, the concept of flow boiling and flow condensation heat transfer in micochannels is analyzed in detail.

Download or read book Developments in Heat Transfer written by Marco Aurelio Dos Santos Bernardes and published by BoD – Books on Demand. This book was released on 2011-09-15 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises heat transfer fundamental concepts and modes (specifically conduction, convection and radiation), bioheat, entransy theory development, micro heat transfer, high temperature applications, turbulent shear flows, mass transfer, heat pipes, design optimization, medical therapies, fiber-optics, heat transfer in surfactant solutions, landmine detection, heat exchangers, radiant floor, packed bed thermal storage systems, inverse space marching method, heat transfer in short slot ducts, freezing an drying mechanisms, variable property effects in heat transfer, heat transfer in electronics and process industries, fission-track thermochronology, combustion, heat transfer in liquid metal flows, human comfort in underground mining, heat transfer on electrical discharge machining and mixing convection. The experimental and theoretical investigations, assessment and enhancement techniques illustrated here aspire to be useful for many researchers, scientists, engineers and graduate students.

Download or read book Heat Pipes written by Peter D. Dunn and published by Pergamon. This book was released on 1982 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The standard work on the subject, providing the background required by those wishing to use or to design heat pipes. The development of the heat pipe is discussed and a wide range of applications described. This revised and updated edition takes into account the introduction of new working fluids, and extended life test data; new types of heat pipes; and some of the latest uses. Annotation copyright by Book News, Inc., Portland, OR