Download or read book Heat Exchange Engineering Compact heat exchangers techniques of size reduction written by E. A. Foumeny and published by Prentice Hall. This book was released on 1991 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second of a two-volume work designed to provide information on the design aspects of thermal systems and to review research and development on the improvement of design and performance. This book concentrates on shell and tube heat exchangers, particularly compact exchangers.
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Elsevier. This book was released on 2001-05-08 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production.To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.
Download or read book CRC Handbook of Thermal Engineering written by Raj P. Chhabra and published by CRC Press. This book was released on 2017-11-08 with total page 1801 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CRC Handbook of Thermal Engineering, Second Edition, is a fully updated version of this respected reference work, with chapters written by leading experts. Its first part covers basic concepts, equations and principles of thermodynamics, heat transfer, and fluid dynamics. Following that is detailed coverage of major application areas, such as bioengineering, energy-efficient building systems, traditional and renewable energy sources, food processing, and aerospace heat transfer topics. The latest numerical and computational tools, microscale and nanoscale engineering, and new complex-structured materials are also presented. Designed for easy reference, this new edition is a must-have volume for engineers and researchers around the globe.
Download or read book Heat Exchanger Design Handbook written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2013-05-20 with total page 1245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference covers important aspects of heat exchangers (HEs): design and modes of operation and practical, large-scale applications in process, power, petroleum, transport, air conditioning, refrigeration, cryogenics, heat recovery, energy, and other industries. This second edition includes over 400 drawings, diagrams, tables, and equations, includes updated material throughout; coverage of the latest advances in HE design techniques; expanded and updated coverage of materials selection; and a look at the newest fabrication techniques.
Download or read book Energy Efficiency in Process Technology written by P.A. Pilavachi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1975 the Commission has been stimulating R & D work aimed at energy saving. The conference objective was to provide an international forum for the presentation and discussion of recent R & D relevant to energy efficiency, taking into account environmental aspects, in the energy intensive process industries.
Download or read book Fundamentals of Heat Exchanger Design written by Dusan P. Sekulic and published by John Wiley & Sons. This book was released on 2023-12-07 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Heat Exchanger Design, Second Edition builds upon the widely-used First Edition, a text often considered to be the most prominent single-volume heat exchanger text on the market. The new and improved Second Edition serves as an equally comprehensive resource, updated to suit the latest technologies and design methods being used in the Heat Exchanger field. Written by First-Edition author Dusan P. Sekulic, this text addresses the latest developments in the industry, including a brand-new chapter on the manufacturing of compact heat exchangers. After opening with a basic introduction to heat exchanger types and design methods, the book goes on to cover more specialized topics such as such as the design of recuperators and regenerators, pressure drop analysis, geometric properties, flow friction, fouling and corrosion, and more. With many significant revisions throughout, this new edition offers more streamlined content while maintaining the consistent, detailed coverage of the fundamentals of the topic that readers appreciated in the First Edition. These unique features position the Second Edition of Fundamentals of Heat Exchanger Design as the ideal text for both engineering professionals and advanced students alike.
Download or read book The CRC Handbook of Mechanical Engineering written by D. Yogi Goswami and published by CRC Press. This book was released on 2004-09-29 with total page 2690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this standard-setting handbook provides and all-encompassing reference for the practicing engineer in industry, government, and academia, with relevant background and up-to-date information on the most important topics of modern mechanical engineering. These topics include modern manufacturing and design, robotics, computer engineering, environmental engineering, economics, patent law, and communication/information systems. The final chapter and appendix provide information regarding physical properties and mathematical and computational methods. New topics include nanotechnology, MEMS, electronic packaging, global climate change, electric and hybrid vehicles, and bioengineering.
Download or read book The CRC Handbook of Thermal Engineering written by Frank Kreith and published by Springer Science & Business Media. This book was released on 2000-02-01 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique in its in-depth coverage of heat transfer and fluid mechanics including numerical and computer methods, applications, thermodynamics and fluid mechanics. It will serve as a comprehensive resource for professional engineers well into the new millennium. Some of the material will be drawn from the "Handbook of Mechanical Engineering," but with expanded information in such areas as compressible flow and pumps, conduction, and desalination.
Download or read book Compact Heat Exchangers written by C. Ranganayakulu and published by John Wiley & Sons. This book was released on 2018-02-09 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive source of generalized design data for most widely used fin surfaces in CHEs Compact Heat Exchanger Analysis, Design and Optimization: FEM and CFD Approach brings new concepts of design data generation numerically (which is more cost effective than generic design data) and can be used by design and practicing engineers more effectively. The numerical methods/techniques are introduced for estimation of performance deteriorations like flow non-uniformity, temperature non-uniformity, and longitudinal heat conduction effects using FEM in CHE unit level and Colburn j factors and Fanning friction f factors data generation method for various types of CHE fins using CFD. In addition, worked examples for single and two-phase flow CHEs are provided and the complete qualification tests are given for CHEs use in aerospace applications. Chapters cover: Basic Heat Transfer; Compact Heat Exchangers; Fundamentals of Finite Element and Finite Volume Methods; Finite Element Analysis of Compact Heat Exchangers; Generation of Design Data by CFD Analysis; Thermal and Mechanical Design of Compact Heat Exchanger; and Manufacturing and Qualification Testing of Compact Heat Exchanger. Provides complete information about basic design of Compact Heat Exchangers Design and data generation is based on numerical techniques such as FEM and CFD methods rather than experimental or analytical ones Intricate design aspects included, covering complete cycle of design, manufacturing, and qualification of a Compact Heat Exchanger Appendices on basic essential fluid properties, metal characteristics, and derivation of Fourier series mathematical equation Compact Heat Exchanger Analysis, Design and Optimization: FEM and CFD Approach is ideal for senior undergraduate and graduate students studying equipment design and heat exchanger design.
Download or read book Compact Heat Exchangers for the Process Industries written by Kenneth J. Bell and published by Begell House Publishers. This book was released on 1997 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers (CHEs) are characterized by large heat transfer area per unit volume of exchanger, resulting in reduced space, weight, and usually reduced energy requirements and cost compared to conventional designs. The objectives of this conference were to identify existing forms of CHEs with their potential use and benefits, to identify the new forms of CHEs, and to identify and discuss barriers and critical issues preventing the broader use of CHEs for the process industry applications.
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Butterworth-Heinemann. This book was released on 2016-09-26 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers: Selection, Design, and Operation, Second Edition, is fully revised to present the most recent and fundamental ideas and industrial concepts in compact heat exchanger technology. This complete reference compiles all aspects of theory, design rules, operational issues, and the most recent developments and technological advancements in compact heat exchangers. New to this edition is the inclusion of micro, sintered, and porous passage description and data, electronic cooling, and an introduction to convective heat transfer fundamentals. New revised content provides up-to-date coverage of industrially available exchangers, recent fouling theories, and reactor types, with summaries of off-design performance and system effects and installations issues in, for example, automobiles and aircraft. Hesselgreaves covers previously neglected approaches, such as the Second Law (of Thermodynamics), pioneered by Bejan and co-workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of energy, according to interpretation. - Contains revised content, covering industrially available exchangers, recent fouling theories, and reactor types - Includes useful comparisons throughout with conventional heat exchangers to emphasize the benefits of CPHE applications - Provides a thorough system view from commissioning, operation, maintenance, and design approaches to reduce fouling and fouling factors - Compiles all aspects of theory, design rules, operational issues, and the most recent developments and technological advancements in compact heat exchangers
Download or read book Fundamentals of Heat Exchanger Design written by Ramesh K. Shah and published by John Wiley & Sons. This book was released on 2003-08-11 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and unique source integrates the material usually distributed among a half a dozen sources. * Presents a unified approach to modeling of new designs and develops the skills for complex engineering analysis. * Provides industrial insight to the applications of the basic theory developed.
Download or read book The CRC Handbook of Mechanical Engineering Second Edition written by and published by CRC Press. This book was released on 1998-03-24 with total page 2642 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past 20 years, the field of mechanical engineering has undergone enormous changes. These changes have been driven by many factors, including: the development of computer technology worldwide competition in industry improvements in the flow of information satellite communication real time monitoring increased energy efficiency robotics automatic control increased sensitivity to environmental impacts of human activities advances in design and manufacturing methods These developments have put more stress on mechanical engineering education, making it increasingly difficult to cover all the topics that a professional engineer will need in his or her career. As a result of these developments, there has been a growing need for a handbook that can serve the professional community by providing relevant background and current information in the field of mechanical engineering. The CRC Handbook of Mechanical Engineering serves the needs of the professional engineer as a resource of information into the next century.
Download or read book Re Engineering the Chemical Processing Plant written by Andrzej Stankiewicz and published by CRC Press. This book was released on 2018-12-14 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first guide to compile current research and frontline developments in the science of process intensification (PI), Re-Engineering the Chemical Processing Plant illustrates the design, integration, and application of PI principles and structures for the development and optimization of chemical and industrial plants. This volume updates professionals on emerging PI equipment and methodologies to promote technological advances and operational efficacy in chemical, biochemical, and engineering environments and presents clear examples illustrating the implementation and application of specific process-intensifying equipment and methods in various commercial arenas.
Download or read book Compact Heat Exchangers written by C. Ranganayakulu and published by John Wiley & Sons. This book was released on 2018-02-02 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive source of generalized design data for most widely used fin surfaces in CHEs Compact Heat Exchanger Analysis, Design and Optimization: FEM and CFD Approach brings new concepts of design data generation numerically (which is more cost effective than generic design data) and can be used by design and practicing engineers more effectively. The numerical methods/techniques are introduced for estimation of performance deteriorations like flow non-uniformity, temperature non-uniformity, and longitudinal heat conduction effects using FEM in CHE unit level and Colburn j factors and Fanning friction f factors data generation method for various types of CHE fins using CFD. In addition, worked examples for single and two-phase flow CHEs are provided and the complete qualification tests are given for CHEs use in aerospace applications. Chapters cover: Basic Heat Transfer; Compact Heat Exchangers; Fundamentals of Finite Element and Finite Volume Methods; Finite Element Analysis of Compact Heat Exchangers; Generation of Design Data by CFD Analysis; Thermal and Mechanical Design of Compact Heat Exchanger; and Manufacturing and Qualification Testing of Compact Heat Exchanger. Provides complete information about basic design of Compact Heat Exchangers Design and data generation is based on numerical techniques such as FEM and CFD methods rather than experimental or analytical ones Intricate design aspects included, covering complete cycle of design, manufacturing, and qualification of a Compact Heat Exchanger Appendices on basic essential fluid properties, metal characteristics, and derivation of Fourier series mathematical equation Compact Heat Exchanger Analysis, Design and Optimization: FEM and CFD Approach is ideal for senior undergraduate and graduate students studying equipment design and heat exchanger design.
Download or read book Compact Heat Exchangers for Energy Transfer Intensification written by Jiri Jaromir Klemes and published by CRC Press. This book was released on 2015-12-16 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers for Energy Transfer Intensification: Low-Grade Heat and Fouling Mitigation provides theoretical and experimental background on heat transfer intensification in modern heat exchangers. Emphasizing applications in complex heat recovery systems for the process industries, this book:Covers various issues related to low-grade hea
Download or read book Compact Heat Exchangers and Enhancement Technology for the Process Industries written by R. K. Shah and published by Begell House Publishers. This book was released on 1999 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The drive to minimize capital investment and improve the energy efficiency of process industry plants has led to a reassessment of the desirability and practicality of incorporating compact heat exchangers (CHEs) and heat transfer enhancement technology into process plants. This volume collects papers presented at the International Conference on Compact Heat Exchangers for the Process Industries, whose objectives were to exploit the existing forms of the CHEs and enhancement technology with their potential use and benefits, to identify new forms of the CHEs and enhancement technology, and to identify and discuss barriers and critical issues preventing the broader use of CHEs and enhancement technology.
