Download or read book Heat and Mass Transfer Phenomena in MHD Flow Modelling with Applications written by Sanjib Sengupta and published by Scientific Research Publishing, Inc. USA. This book was released on 2014-11-18 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of the book is to provide basic idea on fluid dynamics and its related properties and help to understand research work in the field of transport phenomena in MHD flow. The fluid model describing various aspects of boundary layer flow past a vertical flat surface embedded in Darcian porous media have been studied. An asymptotic periodic transformation is used to solve the dynamical equations. The influence of several physical effects like thermal radiation, chemical reaction, magnetic field, radiation absorption,heat sink etc. have been considered on various fluid properties. In this study some significant engineering properties of interest such as skin-friction, Nusselt number and Sherwood number are also calculated and analyzed through graphs and tables. It is expected that, the governed exact closed form of solutions corresponding to different problems can be used for validating numerical treatment of certain critical flows with heat and mass transfer phenomena.
Download or read book Heat and Mass Transfer Phenomena in MHD Flow written by Sanjib Sengupta and published by . This book was released on 2014-11 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat And Mass Transfer In Mhd Flows written by Elmars Blums and published by World Scientific. This book was released on 1987-06-30 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of heat and mass transfer processes by means of external force effects is one of the most important problems in modern applied physics. This book is devoted to the study of the magnetic field effect as it bears on transfer phenomena: heat and mass transfer. In conducting media, this influence is mainly due to the induced electric current and the interaction of the current with the magnetic field, whereas in magnetizable fluids, molecular or colloidal solution, transfer phenomena are directly affected by the field. When analysing heat and mass transfer in multiphase magnetizing media, only those phenomena which could be described in terms of conventional quasi-stationary approximation are considered. The effects assoicated with the non-equilibrium magnetization of the system and particle interaction receive special attention here. The problem studied here have been considered with a view to possible applications, particularly in biology and medicine.
Download or read book Modeling and Simulation of Fluid Flow and Heat Transfer written by Reshu Gupta and published by CRC Press. This book was released on 2024-03-14 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the rapidly advancing modern world, scientific and technological understanding and innovation are reaching new heights. Computational fluid dynamics and heat transfer have emerged as powerful tools, playing a pivotal role in the analysis and design of complex engineering problems and processes. With the ability to mathematically model various engineering phenomena, these computational tools offer a deeper understanding of intricate dynamics before the physical prototype is created. Widely employed as simulation tools, computational fluid dynamics and heat transfer codes enable the virtual or digital prototype development of products and devices involving complex transport and multiphasic phenomena. They have become an indispensable element of the agile product development environment across diverse sectors of manufacturing, facilitating accelerated product development cycles. Key features of this book: Covers the analysis of advanced thermal engineering systems Explores the simulation of various fluids with slip effect Applies entropy and optimization techniques to thermal engineering systems Discusses heat and mass transfer phenomena Explores fluid flow and heat transfer in porous media Captures recent developments in analytical and computational methods used to investigate the complex mathematical models of fluid dynamics Covers the application of mathematical and computational modeling techniques to fluid flow problems in various geometries Modeling and Simulation of Fluid Flow and Heat Transfer delves into the fascinating world of fluid dynamics and heat transfer modeling, presenting an extensive exploration of these subjects. This book is a valuable resource for researchers, engineers, and students seeking to comprehend and apply numerical methods and computational tools in fluid dynamics and heat transfer problems.
Download or read book Heat and Mass Transfer written by and published by BoD – Books on Demand. This book was released on 2018-09-19 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat and mass transfer are ubiquitous transport phenomena in many fields, from the natural environment and living organisms to the engineering process. This book focuses on the latest advances in applying fundamental heat and mass transfer theory and novel technologies for addressing a wide range of industrial problems of interest. This book will present readers with a recent analytical study, CFD modelling, and experimental investigations of heat and mass transfer topics associated with a variety of engineering disciplines including multiphase flow, nanofluids, porous media, battery thermal management, and engineering processes such as extractive distillation and arc welding. The book aims to provide new insights to understand the heat and mass transfer phenomena, serving as a platform for exchanging inspiring ideas and boosting further development of these disciplines.
Download or read book Heat and Mass Transfer written by Md Monwar Hossain and published by BoD – Books on Demand. This book was released on 2011-09-22 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a number of topics in heat and mass transfer processes for a variety of industrial applications. The research papers provide advances in knowledge and design guidelines in terms of theory, mathematical modeling and experimental findings in multiple research areas relevant to many industrial processes and related equipment design. The design of equipment includes air heaters, cooling towers, chemical system vaporization, high temperature polymerization and hydrogen production by steam reforming. Nine chapters of the book will serve as an important reference for scientists and academics working in the research areas mentioned above, especially in the aspects of heat and mass transfer, analytical/numerical solutions and optimization of the processes.
Download or read book Thermal and Solutal Convection in Some Hydromagnetic Flows written by Nazibuddin Ahmed and published by Springer Nature. This book was released on 2023-01-06 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a theoretical analysis of several problems in thermal and solutal convections in magneto-hydrodynamic (MHD) flows. It provides a systemic discussion on the development of fluid dynamics, continuum hypothesis, Newton’s law of viscosity, heat transfer, mass transfer, thermal diffusion, diffusion-thermo-MHD, gray and non-gray gases, Fourier’s law of conduction, and Fick’s law of diffusion in such a way that readers with little knowledge in physics will find it easier to understand the contents. Some physical principles, such as those governing fluid motion, fluid temperature, and fluid concentration, are presented in vector form, allowing the corresponding form to be derived in any orthogonal curvilinear coordinate system. Laplace transform technique in closed form is used to obtain exact solutions to unsteady one-dimensional flow problems, an implicit finite difference method of Crank–Nicholson type is used to solve unsteady two-dimensional flow problems, and an asymptotic series expansion method is used to solve the governing equations of the steady three-dimensional flow problem analytically. Flow and transport phenomena are thoroughly treated in each chapter separately. This book emphasizes the influence of an induced magnetic field. The outcomes of the works are graphically depicted so that readers can gain a tangible understanding of the problems. It also includes a list of inverse Laplace transforms (ILTs) for several specific functions, some of which are not found in the existing literature. The ILTs of special functions are given in brief form and can further be utilized as standard formulae in finding those as special cases. Some new special functions are introduced in the book, along with appropriate definitions. As a result, the formulations for velocity, temperature, concentration, skin friction, Nusselt number, and Sherwood number have been appeared in brief and convenient forms that are uncommon in other literature. This book addresses numerous areas of contemporary magneto-fluid dynamics research that have major implications in engineering. It is primarily intended for researchers working in the field of heat and mass transfer in hydromagnetic flows.
Download or read book Transfer Phenomena in Fluid and Heat Flows XII written by Stanislav Kolisnychenko and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only
Download or read book Modelling of Convective Heat and Mass Transfer in Rotating Flows written by Igor V. Shevchuk and published by Springer. This book was released on 2015-07-24 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents results of the analytical and numerical modeling of convective heat and mass transfer in different rotating flows caused by (i) system rotation, (ii) swirl flows due to swirl generators, and (iii) surface curvature in turns and bends. Volume forces (i.e. centrifugal and Coriolis forces), which influence the flow pattern, emerge in all of these rotating flows. The main part of this work deals with rotating flows caused by system rotation, which includes several rotating-disk configurations and straight pipes rotating about a parallel axis. Swirl flows are studied in some of the configurations mentioned above. Curvilinear flows are investigated in different geometries of two-pass ribbed and smooth channels with 180° bends. The author demonstrates that the complex phenomena of fluid flow and convective heat transfer in rotating flows can be successfully simulated using not only the universal CFD methodology, but in certain cases by means of the integral methods, self-similar and analytical solutions. The book will be a valuable read for research experts and practitioners in the field of heat and mass transfer.
Download or read book Modelling and Simulation of Turbulent Heat Transfer written by B. Sundén and published by WIT Press. This book was released on 2005-02-21 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing invaluable information for both graduate researchers and R & D engineers in industry and consultancy, this book focuses on the modelling and simulation of fluid flow and thermal transport phenomena in turbulent convective flows. Its overall objective is to present state-of-the-art knowledge in order to predict turbulent heat transfer processes in fundamental and idealized flows as well as in engineering applications. The chapters, which are invited contributions from some of the most prominent scientists in this field, cover a wide range of topics and follow a unified outline and presentation to aid accessibility.
Download or read book Advanced Topics in Heat and Mass Transfer and Fluid Flow Phenomena in Multiphase Systems written by João Delgado and published by Trans Tech Publications Ltd. This book was released on 2018-12-05 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, entitled Advanced Topics in Heat and Mass Transfer and Fluid Flow Phenomena in Multiphase Systems, is aimed to provide a collection of recent contributions in the field of transport and fluid flow phenomena in multiphase systems and we hope that this publication will be useful and interesting for many researchers and engineers.
Download or read book Flow and Heat and Mass Transfer in Laminar and Turbulent Mist Gas Droplets Stream over a Flat Plate written by Victor I. Terekhov and published by Springer. This book was released on 2014-07-08 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the author presents selected challenges of thermal-hydraulics modeling of two-phase flows in minichannels with change of phase. These encompass the common modeling of flow boiling and flow condensation using the same expression. Approaches to model these two respective cases show, however, that experimental data show different results to those obtained by methods of calculation of heat transfer coefficient for respective cases. Partially that can be devoted to the fact that there are non-adiabatic effects present in both types of phase change phenomena which modify the pressure drop due to friction, responsible for appropriate modelling. The modification of interface shear stresses between flow boiling and flow condensation in case of annular flow structure may be considered through incorporation of the so called blowing parameter, which differentiates between these two modes of heat transfer. On the other hand, in case of bubbly flows, the generation of bubbles also modifies the friction pressure drop by the influence of heat flux. Presented are also the results of a peculiar M-shape distribution of heat transfer coefficient specific to flow boiling in minichannels. Finally, some attention is devoted to mathematical modeling of dryout phenomena. A five equation model enabling determination of the dryout location is presented, where the mass balance equations for liquid film, droplets and gas are supplemented by momentum equations for liquid film and two-phase core.
Download or read book Fundamentals of Multiphase Heat Transfer and Flow written by Amir Faghri and published by Springer Nature. This book was released on 2019-09-13 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents a modern treatment of fundamentals of heat and mass transfer in the context of all types of multiphase flows with possibility of phase-changes among solid, liquid and vapor. It serves equally as a textbook for undergraduate senior and graduate students in a wide variety of engineering disciplines including mechanical engineering, chemical engineering, material science and engineering, nuclear engineering, biomedical engineering, and environmental engineering. Multiphase Heat Transfer and Flow can also be used to teach contemporary and novel applications of heat and mass transfer. Concepts are reinforced with numerous examples and end-of-chapter problems. A solutions manual and PowerPoint presentation are available to instructors. While the book is designed for students, it is also very useful for practicing engineers working in technical areas related to both macro- and micro-scale systems that emphasize multiphase, multicomponent, and non-conventional geometries with coupled heat and mass transfer and phase change, with the possibility of full numerical simulation.
Download or read book Heat and Mass Transfer Advances in Modelling and Experimental Study for Industrial Applications written by Yong Ren and published by . This book was released on 2018 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat and mass transfer are ubiquitous transport phenomena in many fields, from the natural environment and living organisms to the engineering process. This book focuses on the latest advances in applying fundamental heat and mass transfer theory and novel technologies for addressing a wide range of industrial problems of interest. This book will present readers with a recent analytical study, CFD modelling, and experimental investigations of heat and mass transfer topics associated with a variety of engineering disciplines including multiphase flow, nanofluids, porous media, battery thermal management, and engineering processes such as extractive distillation and arc welding. The book aims to provide new insights to understand the heat and mass transfer phenomena, serving as a platform for exchanging inspiring ideas and boosting further development of these disciplines.
Download or read book Applications of Mathematical Heat Transfer and Fluid Flow Models in Engineering and Medicine written by Abram S. Dorfman and published by John Wiley & Sons. This book was released on 2017-02-06 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of mathematical heat transfer and fluid flow models in engineering and medicine Abram S. Dorfman, University of Michigan, USA Engineering and medical applications of cutting-edge heat and flow models This book presents innovative efficient methods in fluid flow and heat transfer developed and widely used over the last fifty years. The analysis is focused on mathematical models which are an essential part of any research effort as they demonstrate the validity of the results obtained. The universality of mathematics allows consideration of engineering and biological problems from one point of view using similar models. In this book, the current situation of applications of modern mathematical models is outlined in three parts. Part I offers in depth coverage of the applications of contemporary conjugate heat transfer models in various industrial and technological processes, from aerospace and nuclear reactors to drying and food processing. In Part II the theory and application of two recently developed models in fluid flow are considered: the similar conjugate model for simulation of biological systems, including flows in human organs, and applications of the latest developments in turbulence simulation by direct solution of Navier-Stokes equations, including flows around aircraft. Part III proposes fundamentals of laminar and turbulent flows and applied mathematics methods. The discussion is complimented by 365 examples selected from a list of 448 cited papers, 239 exercises and 136 commentaries. Key features: Peristaltic flows in normal and pathologic human organs. Modeling flows around aircraft at high Reynolds numbers. Special mathematical exercises allow the reader to complete expressions derivation following directions from the text. Procedure for preliminary choice between conjugate and common simple methods for particular problem solutions. Criterions of conjugation, definition of semi-conjugate solutions. This book is an ideal reference for graduate and post-graduate students and engineers.
Download or read book Applications of Fluid Dynamics written by M.K. Singh and published by Springer. This book was released on 2017-11-04 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents high-quality papers presented at 3rd International Conference on Applications of Fluid Dynamics (ICAFD 2016) organized by Department of Applied Mathematics, ISM Dhanbad, Jharkhand, India in association with Fluid Mechanics Group, University of Botswana, Botswana. The main theme of the Conference is "Sustainable Development in Africa and Asia in context of Fluid Dynamics and Modeling Approaches". The book is divided into seven sections covering all applications of fluid dynamics and their allied areas such as fluid dynamics, nanofluid, heat and mass transfer, numerical simulations and investigations of fluid dynamics, magnetohydrodynamics flow, solute transport modeling and water jet, and miscellaneous. The book is a good reference material for scientists and professionals working in the field of fluid dynamics.
Download or read book Physical Model Development and Benchmarking for MHD Flows in Blanket Design written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced simulation environment to model incompressible MHD flows relevant to blanket conditions in fusion reactors has been developed at HyPerComp in research collaboration with TEXCEL. The goals of this phase-II project are two-fold: The first is the incorporation of crucial physical phenomena such as induced magnetic field modeling, and extending the capabilities beyond fluid flow prediction to model heat transfer with natural convection and mass transfer including tritium transport and permeation. The second is the design of a sequence of benchmark tests to establish code competence for several classes of physical phenomena in isolation as well as in select (termed here as "canonical",) combinations. No previous attempts to develop such a comprehensive MHD modeling capability exist in the literature, and this study represents essentially uncharted territory. During the course of this Phase-II project, a significant breakthrough was achieved in modeling liquid metal flows at high Hartmann numbers. We developed a unique mathematical technique to accurately compute the fluid flow in complex geometries at extremely high Hartmann numbers (10,000 and greater), thus extending the state of the art of liquid metal MHD modeling relevant to fusion reactors at the present time. These developments have been published in noted international journals. A sequence of theoretical and experimental results was used to verify and validate the results obtained. The code was applied to a complete DCLL module simulation study with promising results.
