Download or read book HDPE Production via Gas Phase Process Cost Analysis HDPE E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-hexene using a gas-phase process. The process examined is similar to LyondellBasell Spherilene process. This report was developed based essentially on the following reference(s): (1) LyondellBasell, "Licensed Polyolefin Technologies and Services - Spherilene" (2) "Polyethylene," Ullmann's Encyclopedia of Industrial Chemistry, 2011 Keywords: Ethene, Bimodal, Fluidized Bed

Download or read book HDPE Production via Gas Phase Process Cost Analysis HDPE E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-butene using a gas phase process. The process examined is similar to Univation UNIPOL process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Ethene, PE, Butylene, Copolymer

Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. - The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications - Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction - Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more

Download or read book Polymer Physics written by U.W. Gedde and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of my teaching efforts during the last ten years at the Royal Institute of Technology. The purpose is to present the subject of polymer physics for undergraduate and graduate students, to focus the fundamental aspects of the subject and to show the link between experiments and theory. The intention is not to present a compilation of the currently available literature on the subject. Very few reference citations have thus been made. Each chapter has essentially the same structure: starling with an introduction, continuing with the actual subject, summarizing the chapter in 30D-500 words, and finally presenting problems and a list of relevant references for the reader. The solutions to the problems presented in Chapters 1-12 are given in Chapter 13. The theme of the book is essentially polymer science, with the exclusion of that part dealing directly with chemical reactions. The fundamentals in polymer science, including some basic polymer chemistry, are presented as an introduction in the first chapter. The next eight chapters deal with different phenomena (processes) and states of polymers. The last three chapters were written with the intention of making the reader think practically about polymer physics. How can a certain type of problem be solved? What kinds of experiment should be conducted? This book would never have been written without the help of my friend and adviser, Dr Anthony Bristow, who has spent many hours reading through the manuscript. criticizing the content.

Download or read book Handbook of Biomaterial Properties written by William Murphy and published by Springer. This book was released on 2016-06-11 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tabular and text data relating to normal and diseased tissue materials and materials used in medical devices. Comprehensive and practical for students, researchers, engineers, and practicing physicians who use implants, this book considers the materials aspects of both implantable materials and natural tissues and fluids. Examples of materials and topics covered include titanium, elastomers, degradable biomaterials, composites, scaffold materials for tissue engineering, dental implants, sterilization effects on material properties, metallic alloys, and much more. Each chapter author considers the intrinsic and interactive properties of biomaterials, as well as their appropriate applications and historical contexts. Now in an updated second edition, this book also contains two new chapters on the cornea and on vocal folds, as well as updated insights, data, and citations for several chapters.

Download or read book Plastic Waste and Recycling written by Trevor Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. - Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement - Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation - Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches

Download or read book Algae Based Polymers Blends and Composites written by Khalid Mahmood Zia and published by Elsevier. This book was released on 2017-06-19 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Algae Based Polymers, Blends, and Composites: Chemistry, Biotechnology and Material Sciences offers considerable detail on the origin of algae, extraction of useful metabolites and major compounds from algal bio-mass, and the production and future prospects of sustainable polymers derived from algae, blends of algae, and algae based composites. Characterization methods and processing techniques for algae-based polymers and composites are discussed in detail, enabling researchers to apply the latest techniques to their own work. The conversion of bio-mass into high value chemicals, energy, and materials has ample financial and ecological importance, particularly in the era of declining petroleum reserves and global warming. Algae are an important source of biomass since they flourish rapidly and can be cultivated almost everywhere. At present the majority of naturally produced algal biomass is an unused resource and normally is left to decompose. Similarly, the use of this enormous underexploited biomass is mainly limited to food consumption and as bio-fertilizer. However, there is an opportunity here for materials scientists to explore its potential as a feedstock for the production of sustainable materials. - Provides detailed information on the extraction of useful compounds from algal biomass - Highlights the development of a range of polymers, blends, and composites - Includes coverage of characterization and processing techniques, enabling research scientists and engineers to apply the information to their own research and development - Discusses potential applications and future prospects of algae-based biopolymers, giving the latest insight into the future of these sustainable materials

Download or read book Cosmeceuticals and Active Cosmetics written by Raja K Sivamani and published by CRC Press. This book was released on 2015-09-18 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cosmeceuticals and Active Cosmetics discusses the science of nearly two dozen cosmeceuticals used today. This third edition provides ample evidence on specific cosmeceutical substances, their classes of use, skin conditions for which they are used, and points of interest arising from other considerations, such as toxicology and manufacturing. The book discusses both cosmetic and therapeutic uses of cosmeceuticals for various conditions including rosacea, dry skin, alopecia, eczema, seborrheic dermatitis, purpura, and vitiligo. Active ingredients in the following products are discussed: caffeine, curcumin, green tea, Rhodiola rosea, milk thistle, and more. Also covered are topical peptides and proteins, amino acids and derivatives, antioxidants, vitamins E and C, niacinamide, botanical extracts, and biomarine actives. Providing ample scientific references, this book is an excellent guide to understanding the science behind the use of cosmeceuticals to treat a variety of dermatological conditions.

Download or read book Springer Handbook of Mechanical Engineering written by Karl-Heinrich Grote and published by Springer Nature. This book was released on 2020-12-09 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.

Download or read book Perspectives on Deep Sea Mining written by Rahul Sharma and published by Springer Nature. This book was released on 2022-01-13 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a sequel to ’Deep-Sea Mining: Resource Potential, Technical and Environmental Considerations’ (2017) and ‘Environmental Issues of Deep-Sea Mining: Impacts, Consequences and Policy Perspectives’ (2019), and aims to provide a comprehensive volume on different perspectives of deep-sea mining from specialists around the world. The work is timely, as deep-sea minerals continue to enthuse researchers involved in activities such as ascertaining their potential as alternative sources for critical metals for green energy and other industrial applications, as well as technology development for their sustainable exploration and exploitation, while addressing environmental concerns. With a steady increase in the number of contractors having exclusive rights over large tracts of seafloor in the ‘Area’, i.e. area beyond national jurisdictions, the International Seabed Authority, mandated with the responsibility of regulating such activities, is in the process of developing a code for exploitation of deep-sea minerals. These, coupled with growing interest among private entrepreneurs, investment companies and policy makers, underscore the need for updated information to be made available in one place on the subject of deep-sea mining. The book evaluates the potential and sustainability of mining for deep-sea minerals compared to other land-based deposits, the technologies needed for mining and processing of ores, the approach towards environmental monitoring and management, as well as the regulatory frameworks and legal challenges to manage deep-sea mining activities. The book is expected to serve as an important reference for all stakeholders including researchers, contractors, mining companies, regulators and NGOs involved in deep-sea mining.

Download or read book Polylactic Acid written by Lee Tin Sin and published by William Andrew. This book was released on 2019-06-15 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polylactic Acid: A Practical Guide for the Processing, Manufacturing, and Applications of PLA, Second Edition, provides a practical guide for engineers and scientists working in PLA and on the development of emerging new products. The current market situation for PLA and biodegradable polymers is described, along with applications across a range of market sectors. In addition, the mechanical, chemical, thermal, rheology and degradation properties are included. Updates include new chapters covering various processing methods, as well as recycling methods, and additives and processing aids. New applications cover a range of products (including 3D Printing), and an environmental assessment, including regulatory aspects. The book is not only a useful introduction to this topic, but also a practical, readily applicable reference book that will support decision-making in the plastics industry. - Presents an essential reference for engineers, scientists and product designers considering switching to a sustainable plastic - Covers the properties, synthesis and polymerization of PLA, along with processing techniques involved in fabricating parts from this polymer - Includes critical new chapters on processing, additives, recycling and environmental considerations relating to PLA

Download or read book Thinking Like an Engineer written by Elizabeth A. Stephan and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thinking Like an Engineer: An Active Learning Approach, 2e, is specifically designed to utilize an active learning environment for first year engineering courses. In-class activities include collaborative problem-solving, computer-based activities, and hands-on experiments, encouraging guided inquiry. Homework assignments and review sections reinforce and expand on the activities. Content can be customized to match the topic organization in your course syllabi. Paired with Pearson's new MyEngineeringLab , Thinking Like an Engineer, 2e, is a complete digital solution for your first year engineering course. MyEngineeringLab offers students customized, self-paced learning with instant feedback. Students will be prepared ahead of class, allowing you to spend class time focusing on active learning. Subscriptions to MyEngineeringLab are available to purchase online or packaged with your textbook (unique ISBN). Use the following ISBNs to purchase MyEngineeringLab: Thinking Like an Engineer, 2e & MyEngineeringLab with Pearson eText Student Access Code Card for Thinking Like an Engineer, 2e ISBN: 0132981386 This package includes the Thinking Like an Engineer, 2e textbook, an access card for MyEngineeringLab, and a Pearson eText Student Access Code Card for Thinking Like an Engineer, 2e. MyEngineeringLab with Pearson eText -- Access Card -- for Thinking Like an Engineer, 2e ISBN: 0132766744 This stand-alone access card package contains an access code for MyEngineeringLab, and a Pearson eText student access code card for Thinking Like an Engineer, 2e eText.

Download or read book Piping Materials Guide written by Peter Smith and published by Elsevier. This book was released on 2005-01-20 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book of its kind on the market, this book is the companion to our Valve Selection Handbook, by the same author. Together, these two books form the most comprehensive work on piping and valves ever written for the process industries. This book covers the entire piping process, including the selection of piping materials according to the job, the application of the materials and fitting, trouble-shooting techniques for corrosion control, inspections for OSHA regulations, and even the warehousing, distributing, and ordering of materials. There are books on materials, fitting, OSHA regulations, and so on, but this is the only "one stop shopping" source for the piping engineer on piping materials.- Provides a "one stop shopping" source for the piping engineer on piping materials- Covers the entire piping process. - Designed as an easy-to-access guide

Download or read book HDPE Production via Gas Phase Process Cost Analysis HDPE E14A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-butene using a gas-phase process. The process examined is similar to LyondellBasell Spherilene process. This report was developed based essentially on the following reference(s): Keywords: Ethene, PE, Fluidized Bed, Butylene

Download or read book HDPE Production via Gas Phase Process Cost Analysis HDPE E32A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) production from polymer grade (PG) ethylene using a gas phase process. The process examined is similar to LyondellBasell Spherilene process. This report was developed based essentially on the following reference(s): Keywords: Ethene, PE, Gas Reactor, Homopolymer

Download or read book Materials written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2013-10-09 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials, Third Edition, is the essential materials engineering text and resource for students developing skills and understanding of materials properties and selection for engineering applications. This new edition retains its design-led focus and strong emphasis on visual communication while expanding its inclusion of the underlying science of materials to fully meet the needs of instructors teaching an introductory course in materials. A design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications. Highly visual full color graphics facilitate understanding of materials concepts and properties. For instructors, a solutions manual, lecture slides, online image bank, and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com. The number of worked examples has been increased by 50% while the number of standard end-of-chapter exercises in the text has been doubled. Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology. The text meets the curriculum needs of a wide variety of courses in the materials and design field, including introduction to materials science and engineering, engineering materials, materials selection and processing, and materials in design. - Design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications - Highly visual full color graphics facilitate understanding of materials concepts and properties - Chapters on materials selection and design are integrated with chapters on materials fundamentals, enabling students to see how specific fundamentals can be important to the design process - For instructors, a solutions manual, lecture slides, online image bank and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com - Links with the Cambridge Engineering Selector (CES EduPack), the powerful materials selection software. See www.grantadesign.com for information NEW TO THIS EDITION: - Text and figures have been revised and updated throughout - The number of worked examples has been increased by 50% - The number of standard end-of-chapter exercises in the text has been doubled - Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology

Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.