Download or read book Hazard and Risk Analysis in Food Processing Second Edition written by Paul Besseling and published by Createspace Independent Publishing Platform. This book was released on 2015-09-09 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pré́con Food Management BV is based in mainland Europe in Bunnik, the Netherlands. The consultants of this advisory firm specialize in food safety and food quality subjects within the food supply chain. Established in 1993 when HACCP became a mandatory methodology as part of the harmonized food legislation enforced in the EU member states, they are now a recognized authority in the food safety field. This book is translated from the earlier published Dutch edition because of the requirement for a good professional background regarding hazard and risk analysis and HACCP, the firm encountered during their assignments outside Dutch territory. The firm undertakes a lot of assignments to improve food safety control within the food manufacturing industry, the food retail industry and also on behalf of 2nd and 3rd world national governments to enhance food safety legislation and food control. The firm operates a special e-learning portal to train food workers in the area of hygiene and food safety.
Download or read book Risk Assessment Methods for Biological and Chemical Hazards in Food written by Fernando Pérez-Rodríguez and published by CRC Press. This book was released on 2020-10-28 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk assessment has been extensively developed in several scientific fields, such as environmental science, economics, and civil engineering, among others. In the aftermath of the SPS and GATT agreements on the use of risk analysis framework in food trade, signed in the 1990s, international organisations and governments adopted risk assessment as a science-based process to ensure food safety along the food chain. The food industry can also benefit from the use of this approach for food process optimisation and quality assurance. Risk Assessment Methods for Biological and Chemical Hazards in Food introduces the reader to quantitative risk assessment methods encompassing general concepts to specific applications to biological and chemical hazards in foods. In the first section, the book presents food risk assessment as methodology and addresses, more specifically, new trends and approaches such as the development of risk rating methods, risk metrics, risk-benefit assessment studies and quality assessment methods. Section II is dedicated to biological hazards. This section identifies the most relevant biological hazards along the food chain and provides an overview on the types of predictive microbiology models used to describe the microbial response along the food chain. Chapter 12 specifically deals with cross contamination and the quantitative methods that can be applied to describe this relevant microbial process. The development and application of dose-response models (i.e. mathematical function describing the relationship between pathogen dose and health response) are also covered in this section. In Section III, the book translates risk assessment concepts into the area of chemical hazards, defining the process steps to determine chemical risk and describing the uncertainty and variability sources associated with chemicals. Key Features: Presents new trends and approaches in the field of risk assessment in foods Risk assessment concepts are illustrated by practical examples in the food sector Discusses how quantitative information and models are integrated in a quantitative risk asssment framework Provides examples of applications of quantitative chemical risk assessment in risk management The book, written by renowned experts in their field, is a comprehensive collection of quantitative methods and approaches applied to risk assessment in foods. It can be used as an extensive guide for food safety practitioners and researchers to perform quantitative risk assessment in foods
Download or read book Microbiological Risk Assessment in Food Processing written by M. Brown and published by Elsevier. This book was released on 2002-09-26 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbiological risk assessment (MRA) is one of the most important recent developments in food safety management. Adopted by Codex Alimentarius and many other international bodies, it provides a structured way of identifying and assessing microbiological risks in food. Edited by two leading authorities, and with contributions by international experts in the field, Microbiological risk assessment provides a detailed coverage of the key steps in MRA and how it can be used to improve food safety.The book begins by placing MRA within the broader context of the evolution of international food safety standards.Part one introduces the key steps in MRA methodology. A series of chapters discusses each step, starting with hazard identification and characterisation before going on to consider exposure assessment and risk characterisation. Given its importance, risk communication is also covered. Part two then considers how MRA can be implemented in practice. There are chapters on implementing the results of a microbiological risk assessment and on the qualitative and quantitative tools available in carrying out a MRA. It also discusses the relationship of MRA to the use of microbiological criteria and another key tool in food safety management, Hazard Analysis and Critical Control Point (HACCP) systems.With its authoritative coverage of both principles and key issues in implementation, Microbiological risk assessment in food processing is a standard work on one of the most important aspects of food safety management. Provides a detailed coverage of the key steps in microbiological risk assessment (MRA) and how it can be used to improve food safety Places MRA within the broader context of the evolution of international food safety standards Introduces the key steps in MRA methodology, considers exposure assessment and risk characterisation, and covers risk communication
Download or read book The Food Safety Hazard Guidebook written by Richard Lawley and published by Royal Society of Chemistry. This book was released on 2008 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise, accessible and affordable source of reference covering a wide range of known and emerging food safety hazards, both biological and chemical.
Download or read book Foodborne Pathogens written by Clive de W. Blackburn and published by McGraw Hill Professional. This book was released on 2002 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: As trends in foodborne disease continue to rise, the effective identification and control of pathogens becomes ever more important for the food industry. With its distinguished international team of contributors, Foodborne pathogens provides an authoritative and practical guide to effective control measures and how they can be applied in practice to individual pathogens. Part One looks at general techniques in assessing and managing microbiological hazards. After a review of analytical methods, there are chapters on modelling pathogen behaviour and carrying out a risk assessment as the essential foundation for effective food safety management. The following chapters then look at good management practice in key stages in the supply chain, starting with farm production. There are chapters on hygienic plant design and sanitation, and safe process design and operation which provide the foundation for a discussion of what makes for effective HACCP systems implementation. There is also a chapter on safe practices for consumers and food handlers in the retail and catering sectors.This discussion of pathogen control then provides a context for Part Two which looks at what this means in practice for key pathogens such as E. coli, Salmonella, Listeria and Campylobacter. Each chapter discusses pathogen characteristics, detection methods and control procedures. Part Three then looks at non-bacterial hazards such as viruses and parasites, as well as emerging potential 'hazards' such as Mycobacterium paratuberculosis and the increasingly important area of chronic disease. Foodborne pathogens will be widely welcomed as an essential and authoritative guide to successful pathogen control in the food industry.
Download or read book The Food Safety Hazard Guidebook written by Richard Lawley and published by Royal Society of Chemistry. This book was released on 2015-10-20 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Food safety is important and consumers have a right to expect that those who supply the food that they buy have taken every care to manufacture products that will do them no harm. Those with a responsibility for the regulation of the global food industry recognise this principle and legislate accordingly and the business of managing and regulating the safety of the food supply chain has come a long way in the last 25 years or so. Prompted by the emergence of new food safety hazards, such as the bacterial pathogens Listeria monocytogenes and E. coli O157, powerful new techniques for evaluating and managing the risks presented by these threats have been developed. For example, hazard analysis critical control point, or HACCP, has now become the food safety management system of choice worldwide. Although the food safety management tools are now widely available, they are still virtually useless unless they are supported by adequate and accurate information. HACCP does not work unless its practitioners have access to enough data and scientific knowledge to enable them to understand hazards and how to control them effectively. The Food Safety Hazard Guidebook is an attempt to address the problem of accessing the available information by distilling the key facts about a wide range of individual food safety hazards into a single text. The result is a guidebook, rather than an encyclopaedia, which acts as a portal for the immense and ever expanding body of scientific knowledge that exists for food safety. It is an easy-to-use information resource for anyone with a professional interest in the safety of the food supply. The book is easy to navigate and presents concise and carefully researched factual information on a wide range of biological and chemical hazards in a clear format that is designed to support risk analysis exercises and HACCP studies. It covers a broad range of established and emerging food safety hazards and includes details of authoritative sources of further information (many web-based) for those seeking to examine a topic in greater depth. The section on food allergens is a particularly valuable component of the book, the chapters on fish toxins are also useful and unusual in a book of this kind and bacterial pathogens are comprehensively covered. One of the most important features of the book is the wide scope of the content and the highly structured format designed to help the reader find information quickly. Other key benefits to the reader are: -The wide range of biological and chemical hazards covered in a single book -Written specifically with food industry professionals in mind -Easy to navigate and accessible for the non-expert -Clear and concise presentation of factual information presented in a format that lends itself to use in risk assessment exercises -Inclusion of references and web links to reliable sources of further information on each chapter -specifically designed for practical use by a professional readership.
Download or read book Microbial Risk Analysis of Foods written by Donald W. Schaffner and published by Emerging Issues in Food Safety. This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an invaluable explanation of microbial risk assessment of foods and clear interpretations of the implications. Expands the basics of microbial risk assessment to include the relationship between risk assessment and other microbial food safety concepts, such as the Hazard Analysis and Critical Control Points and Food Safety Objective approaches. Includes a practical case study chapter that applies key concepts presented in the book in a real situation. Provides a comprehensive and expansive approach to the subject of microbial risk assessment. Serves as a useful resource for university researchers, graduate students, industry analysts, and government risk managers.
Download or read book Hazard Analysis Critical Control Point Evaluations written by Frank L. Bryan and published by . This book was released on 1992 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hazard Analysis and Risk Based Preventive Controls written by Hal King and published by Academic Press. This book was released on 2017-10-12 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hazard Analysis and Risk-Based Preventive Controls: Improving Food Safety in Human Food Manufacturing for Food Businesses is a comprehensive, first of its kind resource for the retail food industry on the Hazard Analysis and Risk-based Preventive Controls (PCHF) regulations of the Food Safety Modernization Act (FSMA). This book covers all aspects of PCHF, including the legislation's intent, applications to ensure safe food production, and resources to keep up-to-date on new food safety hazards and regulatory guidance. Written for food safety professionals and food business leaders, its emphasis on what the retail food industry needs to know about PCHF make it an indispensable resource for organizations buying food from companies required to demonstrate compliance with PCHF. PCHF implementation is (or soon will be) required for human food companies along the supply chain in the United States, as well as all food companies that import ingredients and products for human consumption into the U.S. Explains what retail food industry professionals need to know about PCHF and how they can leverage PCHF when working with suppliers Provides the most current "how to" information on implementing PCHF to prepare for new FDA regulations in the food industry Identifies the right resources to perform hazard analysis and develop effective preventive controls Demonstrates step-by-step examples for continuous improvement in sustaining PCHF responsibilities and keeping abreast of new food safety information
Download or read book The Food Safety Hazard Guidebook written by Richard Lawley and published by Royal Society of Chemistry. This book was released on 2008-06-27 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food safety is important and consumers have a right to expect that those who supply the food that they buy have taken every care to manufacture products that will do them no harm. Those with a responsibility for the regulation of the global food industry recognise this principle and legislate accordingly and the business of managing and regulating the safety of the food supply chain has come a long way in the last 25 years or so. Prompted by the emergence of new food safety hazards, such as the bacterial pathogens Listeria monocytogenes and E. coli O157, powerful new techniques for evaluating and managing the risks presented by these threats have been developed. For example, hazard analysis critical control point, or HACCP, has now become the food safety management system of choice worldwide. Although the food safety management tools are now widely available, they are still virtually useless unless they are supported by adequate and accurate information. HACCP does not work unless its practitioners have access to enough data and scientific knowledge to enable them to understand hazards and how to control them effectively. The Food Safety Hazard Guidebook is an attempt to address the problem of accessing the available information by distilling the key facts about a wide range of individual food safety hazards into a single text. The result is a guidebook, rather than an encyclopaedia, which acts as a portal for the immense and ever expanding body of scientific knowledge that exists for food safety. It is an easy-to-use information resource for anyone with a professional interest in the safety of the food supply. The book is easy to navigate and presents concise and carefully researched factual information on a wide range of biological and chemical hazards in a clear format that is designed to support risk analysis exercises and HACCP studies. It covers a broad range of established and emerging food safety hazards and includes details of authoritative sources of further information (many web-based) for those seeking to examine a topic in greater depth. The section on food allergens is a particularly valuable component of the book, the chapters on fish toxins are also useful and unusual in a book of this kind and bacterial pathogens are comprehensively covered. One of the most important features of the book is the wide scope of the content and the highly structured format designed to help the reader find information quickly. Other key benefits to the reader are: -The wide range of biological and chemical hazards covered in a single book -Written specifically with food industry professionals in mind -Easy to navigate and accessible for the non-expert -Clear and concise presentation of factual information presented in a format that lends itself to use in risk assessment exercises -Inclusion of references and web links to reliable sources of further information on each chapter -specifically designed for practical use by a professional readership
Download or read book Food Safety Handbook written by Ronald H. Schmidt and published by John Wiley & Sons. This book was released on 2005-03-11 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: As with the beginning of the twentieth century, when food safety standards and the therapeutic benefits of certain foods and supplements first caught the public’s attention, the dawn of the twenty-first century finds a great social priority placed on the science of food safety. Ronald Schmidt and Gary Rodrick’s Food Safety Handbook provides a single, comprehensive reference on all major food safety issues. This expansive volume covers current United States and international regulatory information, food safety in biotechnology, myriad food hazards, food safety surveillance, and risk prevention. Approaching food safety from retail, commercial, and institutional angles, this authoritative resource analyzes every step of the food production process, from processing and packaging to handling and distribution. The Handbook categorizes and defines real and perceived safety issues surrounding food, providing scientifically non-biased perspectives on issues for professional and general readers. Each part is divided into chapters, which are then organized into the following structure: Introduction and Definition of Issues; Background and Historical Significance; Scientific Basis and Implications; Regulatory, Industrial, and International Implications; and Current and Future Implications. Topics covered include: Risk assessment and epidemiology Biological, chemical, and physical hazards Control systems and intervention strategies for reducing risk or preventing food hazards, such as Hazard Analysis Critical Control Point (HACCP) Diet, health, and safety issues, with emphasis on food fortification, dietary supplements, and functional foods Worldwide food safety issues, including European Union perspectives on genetic modification Food and beverage processors, manufacturers, transporters, and government regulators will find the Food Safety Handbook to be the premier reference in its field.
Download or read book Risk Assessment written by Georgi Popov and published by John Wiley & Sons. This book was released on 2022-01-19 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk Assessment Explore the fundamentals of risk assessment with references to the latest standards, methodologies, and approaches The Second Edition of Risk Assessment: A Practical Guide to Assessing Operational Risks delivers a practical exploration of a wide array of risk assessment tools in the contexts of preliminary hazard analysis, job safety analysis, task analysis, job risk assessment, personnel protective equipment hazard assessment, failure mode and effect analysis, and more. The distinguished authors discuss the latest standards, theories, and methodologies covering the fundamentals of risk assessments, as well as their practical applications for safety, health, and environmental professionals with risk assessment responsibilities. “What If”/Checklist Analysis Methods are included for additional guidance. Now in full color, the book includes interactive exercises, links, videos, and online risk assessment tools that can be immediately applied by working practitioners. The authors have also included: Material that reflects the latest updates to ISO standards, the ASSP Technical Report, and the ANSI Z590.3 Prevention through Design standard New hazard phrases for chemical hazards in the Globally Harmonized System, as well as NIOSH’s new occupational exposure banding tool The new risk-based approach featured in the NAVY IH Field Manual New chapters covering business continuity, causal factors analysis, and layers of protection analysis and barrier analysis An indispensable resource for employed safety professionals in a variety of industries, business leaders and staff personnel with safety responsibilities, and environmental engineers Risk Assessment: A Practical Guide to Assessing Operational Risks is also useful for students in safety, health, and environmental science courses.
Download or read book Guidelines for Chemical Process Quantitative Risk Analysis written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-08-27 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical process quantitative risk analysis (CPQRA) as applied to the CPI was first fully described in the first edition of this CCPS Guidelines book. This second edition is packed with information reflecting advances in this evolving methodology, and includes worked examples on a CD-ROM. CPQRA is used to identify incident scenarios and evaluate their risk by defining the probability of failure, the various consequences and the potential impact of those consequences. It is an invaluable methodology to evaluate these when qualitative analysis cannot provide adequate understanding and when more information is needed for risk management. This technique provides a means to evaluate acute hazards and alternative risk reduction strategies, and identify areas for cost-effective risk reduction. There are no simple answers when complex issues are concerned, but CPQRA2 offers a cogent, well-illustrated guide to applying these risk-analysis techniques, particularly to risk control studies. Special Details: Includes CD-ROM with example problems worked using Excel and Quattro Pro. For use with Windows 95, 98, and NT.
Download or read book Plant Sanitation for Food Processing and Food Service Second Edition written by Y. H. Hui and published by CRC Press. This book was released on 2014-12-16 with total page 1390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and accessible, this book presents fundamental principles and applications that are essential for food production and food service safety. It provides basic, practical information on the daily operations in a food processing plant and reviews some of the industry's most recent developments. Formerly titled Food Plant Sanitation, this second edition discusses nine additional food processing industries and contains 14 new chapters. Among others, new topics include sanitation in food transportation and sanitation of fresh produce in retail establishments.
Download or read book Microbiological Risk Assessment Associated with the Food Processing and Distribution Chain written by Jeanne-Marie Membre and published by John Wiley & Sons. This book was released on 2022-05-23 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: According to the World Health Organization, one in every ten people worldwide falls ill from eating contaminated food every year, with 550 million cases of diarrheal diseases. Microbiological risk assessment aims to characterize the nature and probability of harm resulting from human exposure to the biological agents that are present in foodstuffs. This assessment must take into account all stages of the chain: from the production of raw materials to consumption. After briefly introducing food safety and risk assessment, this book details the four major steps of microbiological risk assessment. The contributors first present hazard identification and then exposure assessment, which is subdivided into methods for the detection and enumeration of pathogens and for the quantification of the level of exposure. Then, hazard characterization is subdivided into pathogenicity mechanisms and quantification of the dose–response relationship. Finally a guide for microbiological risk characterization is provided. The conclusion presents possible development avenues for microbiological risk assessment, particularly its integration into a holistic assessment of food systems.
Download or read book Foodborne Pathogens written by Clive de W Blackburn and published by Elsevier. This book was released on 2009-06-30 with total page 1232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective control of pathogens continues to be of great importance to the food industry. The first edition of Foodborne pathogens quickly established itself as an essential guide for all those involved in the management of microbiological hazards at any stage in the food production chain. This major edition strengthens that reputation, with extensively revised and expanded coverage, including more than ten new chapters. Part one focuses on risk assessment and management in the food chain. Opening chapters review the important topics of pathogen detection, microbial modelling and the risk assessment procedure. Four new chapters on pathogen control in primary production follow, reflecting the increased interest in safety management early in the food chain. The fundamental issues of hygienic design and sanitation are also covered in more depth in two extra chapters. Contributions on safe process design and operation, HACCP and good food handling practice complete the section. Parts two and three then review the management of key bacterial and non-bacterial foodborne pathogens. A new article on preservation principles and technologies provides the context for following chapters, which discuss pathogen characteristics, detection methods and control procedures, maintaining a practical focus. There is expanded coverage of non-bacterial agents, with dedicated chapters on gastroenteritis viruses, hepatitis viruses and emerging viruses and foodborne helminth infections among others. The second edition of Foodborne pathogens: hazards, risk analysis and control is an essential and authoritative guide to successful pathogen control in the food industry. Strengthens the highly successful first edition of Foodborne pathogens with extensively revised and expanded coverage Discusses risk assessment and management in the food chain. New chapters address pathogen control, hygiene design and HACCP Addresses preservation principles and technologies focussing on pathogen characteristics, detection methods and control procedures
Download or read book Food Safety Management written by Veslemøy Andersen and published by Elsevier. This book was released on 2023-03-27 with total page 1158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Safety Management: A Practical Guide for the Food Industry, Second Edition continues to present a comprehensive, integrated and practical approach to the management of food safety throughout the production chain. While many books address specific aspects of food safety, no other book guides you through the various risks associated with each sector of the production process or alerts you to the measures needed to mitigate those risks. This new edition provides practical examples of incidents and their root causes, highlighting pitfalls in food safety management and providing key insights into different means for avoiding them. Each section addresses its subject in terms of relevance and application to food safety and, where applicable, spoilage. The book covers all types of risks (e.g., microbial, chemical, physical) associated with each step of the food chain, making it an ideal resource. Addresses risks and controls at various stages of the food supply chain based on food type, including a generic HACCP study and new information on FSMA Covers the latest emerging technologies for ensuring food safety Includes observations on what works and what doesn't on issues in food safety management Provides practical guidelines for the implementation of elements of the food safety assurance system Explains the role of different stakeholders of the food supply
