Download or read book Hardware Protected Security for Ground Vehicles written by Vehicle Electrical System Security Committee and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Access mechanisms to system data and/or control is a primary use case of the hardware protected security environment (hardware protected security environment) during different uses and stages of the system. The hardware protected security environment acts as a gatekeeper for these use cases and not necessarily as the executor of the function. This section is a generalization of such use cases in an attempt to extract common requirements for the hardware protected security environment that enable it to be a gatekeeper.Examples are: Creating a new key fob Re-flashing ECU firmware Reading/exporting PII out of the ECU Using a subscription-based feature Performing some service on an ECU Transferring ownership of the vehicleSome of these examples are discussed later in this section and some have detailed sections of their own. This list is by no means comprehensive. Other use cases that require hardware protected security environment-based access control may be used by each manufacturer/service provider based on vehicle capabilities, architecture, and business model.This section describes how the hardware protected security environment provides a platform to implement access control by enabling secure authentication, authorization and access enforcement. It does not define any specific access control system (DAC/MAC/capability-based/role-based/etc.), models, or polices.A general access control system is based on the following stages: 1Identifying and authenticating the user. 2Authorizing access to the resource. aComparing authenticated user to policies (database/certificates/other). bComparing other conditions (temporal/spatial/other) to policies database. cUnlocking access to the resource. 3Using the resource. 4(Optional) Removing access to the resource based on temporal or other conditions. aLocking access to the resource.The hardware protected security environment can be involved to different extents in each of the stages listed above. The main two types of hardware protected security environment involvements are full control and partial control. In partial control, the hardware protected security environment is responsible to authenticate and authorize the access, while the normal environment is responsible to lock/unlock the resource. In full control, the hardware protected security environment is responsible for both. Automotive computer systems are required to establish trustworthiness through device identity, sealing, attestation, data integrity, and availability. These systems must be resilient to a wide range of attacks that cannot be thwarted through software-only security mechanisms. A hardware root of trust and the hardware-based security primitives are fundamentally necessary to satisfy demands of connected and highly or fully automated vehicles. This document provides a comprehensive view of security mechanisms supported in hardware for automotive use cases, along with best practices for using such mechanisms.

Download or read book Automotive Cybersecurity Engineering Handbook written by Dr. Ahmad MK Nasser and published by Packt Publishing Ltd. This book was released on 2023-10-13 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accelerate your journey of securing safety-critical automotive systems through practical and standard-compliant methods Key Features Explore threat landscape and vulnerabilities facing the modern automotive systems Apply security controls to all vehicle layers for mitigating cybersecurity risks in automotives Find out how systematic secure engineering mitigates cyber risks while ensuring compliance Purchase of the print or Kindle book includes a free PDF eBook Book DescriptionReplete with exciting challenges, automotive cybersecurity is an emerging domain, and cybersecurity is a foundational enabler for current and future connected vehicle features. This book addresses the severe talent shortage faced by the industry in meeting the demand for building cyber-resilient systems by consolidating practical topics on securing automotive systems to help automotive engineers gain a competitive edge. The book begins by exploring present and future automotive vehicle architectures, along with relevant threats and the skills essential to addressing them. You’ll then explore cybersecurity engineering methods, focusing on compliance with existing automotive standards while making the process advantageous. The chapters are designed in a way to help you with both the theory and practice of building secure systems while considering the cost, time, and resource limitations of automotive engineering. The concluding chapters take a practical approach to threat modeling automotive systems and teach you how to implement security controls across different vehicle architecture layers. By the end of this book, you'll have learned effective methods of handling cybersecurity risks in any automotive product, from single libraries to entire vehicle architectures.What you will learn Get to grips with present and future vehicle networking technologies Explore basic concepts for securing automotive systems Discover diverse approaches to threat modeling of systems Conduct efficient threat analysis and risk assessment (TARA) for automotive systems using best practices Gain a comprehensive understanding of ISO/SAE 21434's cybersecurity engineering approach Implement cybersecurity controls for all vehicle life cycles Master ECU-level cybersecurity controls Who this book is for If you’re an engineer wondering where to get started in the field of automotive cybersecurity or trying to understand which security standards apply to your product and how, then this is the book for you. This book is also for experienced engineers looking for a practical approach to automotive cybersecurity development that can be achieved within a reasonable time frame while leveraging established safety and quality processes. Familiarity with basic automotive development processes across the V-model will help you make the most of this book.

Download or read book Cybersecurity for Commercial Vehicles written by Gloria D'Anna and published by SAE International. This book was released on 2018-08-28 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough view of cybersecurity to encourage those in the commercial vehicle industry to be fully aware and concerned that their fleet and cargo could be at risk to a cyber-attack. It delivers details on key subject areas including: • SAE International Standard J3061; the cybersecurity guidebook for cyber-physical vehicle systems • The differences between automotive and commercial vehicle cybersecurity. • Forensics for identifying breaches in cybersecurity. • Platooning and fleet implications. • Impacts and importance of secure systems for today and for the future. Cybersecurity for all segments of the commercial vehicle industry requires comprehensive solutions to secure networked vehicles and the transportation infrastructure. It clearly demonstrates the likelihood that an attack can happen, the impacts that would occur, and the need to continue to address those possibilities. This multi-authored presentation by subject-matter experts provides an interesting and dynamic story of how industry is developing solutions that address the critical security issues; the key social, policy, and privacy perspectives; as well as the integrated efforts of industry, academia, and government to shape the current knowledge and future cybersecurity for the commercial vehicle industry.

Download or read book Automotive Cybersecurity written by David Ward and published by SAE International. This book was released on 2021-12-16 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industries, regulators, and consumers alike see cybersecurity as an ongoing challenge in our digital world. Protecting and defending computer assets against malicious attacks is a part of our everyday lives. From personal computing devices to online financial transactions to sensitive healthcare data, cyber crimes can affect anyone. As technology becomes more deeply embedded into cars in general, securing the global automotive infrastructure from cybercriminals who want to steal data and take control of automated systems for malicious purposes becomes a top priority for the industry. Systems and components that govern safety must be protected from harmful attacks, unauthorized access, damage, or anything else that might interfere with safety functions. Automotive Cybersecurity: An Introduction to ISO/SAE 21434 provides readers with an overview of the standard developed to help manufacturers keep up with changing technology and cyber-attack methods. ISO/SAE 21434 presents a comprehensive cybersecurity tool that addresses all the needs and challenges at a global level. Industry experts, David Ward and Paul Wooderson, break down the complex topic to just what you need to know to get started including a chapter dedicated to frequently asked questions. Topics include defining cybersecurity, understanding cybersecurity as it applies to automotive cyber-physical systems, establishing a cybersecurity process for your company, and explaining assurances and certification.

Download or read book Heavy Vehicle Event Data Recorder Interpretation written by Christopher D Armstrong and published by SAE International. This book was released on 2018-11-02 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last ten years have seen explosive growth in the technology available to the collision analyst, changing the way reconstruction is practiced in fundamental ways. The greatest technological advances for the crash reconstruction community have come in the realms of photogrammetry and digital media analysis. The widespread use of scanning technology has facilitated the implementation of powerful new tools to digitize forensic data, create 3D models and visualize and analyze crash vehicles and environments. The introduction of unmanned aerial systems and standardization of crash data recorders to the crash reconstruction community have enhanced the ability of a crash analyst to visualize and model the components of a crash reconstruction. Because of the technological changes occurring in the industry, many SAE papers have been written to address the validation and use of new tools for collision reconstruction. Collision Reconstruction Methodologies Volumes 1-12 bring together seminal SAE technical papers surrounding advancements in the crash reconstruction field. Topics featured in the series include: • Night Vision Study and Photogrammetry • Vehicle Event Data Recorders • Motorcycle, Heavy Vehicle, Bicycle and Pedestrian Accident Reconstruction The goal is to provide the latest technologies and methodologies being introduced into collision reconstruction - appealing to crash analysts, consultants and safety engineers alike.

Download or read book Computer Safety Reliability and Security written by Alexander Romanovsky and published by Springer Nature. This book was released on 2019-09-02 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the Workshops held in conjunction with SAFECOMP 2019, 38th International Conference on Computer Safety, Reliability and Security, in September 2019 in Turku, Finland. The 32 regular papers included in this volume were carefully reviewed and selected from 43 submissions; the book also contains two invited papers. The workshops included in this volume are: ASSURE 2019: 7th International Workshop on Assurance Cases for Software-Intensive Systems DECSoS 2019: 14th ERCIM/EWICS/ARTEMIS Workshop on Dependable Smart Embedded and Cyber-Physical Systems and Systems-of-Systems SASSUR 2019: 8th International Workshop on Next Generation of System Assurance Approaches for Safety-Critical Systems STRIVE 2019: Second International Workshop on Safety, securiTy, and pRivacy In automotiVe systEms WAISE 2019: Second International Workshop on Artificial Intelligence Safety Engineering

Download or read book Information Security Practice and Experience written by Chunhua Su and published by Springer Nature. This book was released on 2022-11-18 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 17th International Conference on Information Security Practice and Experience, ISPEC 2022, held in Taipei, Taiwan, in November 2022. The 33 full papers together with 2 invited papers included in this volume were carefully reviewed and selected from 87 submissions. The main goal of the conference is to promote research on new information security technologies, including their applications and their integration with IT systems in various vertical sectors.

Download or read book Enabling Technologies for the Internet of Things written by Sergio Saponara and published by CRC Press. This book was released on 2022-09-01 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enabling Technologies for the Internet of Things: Wireless Circuits, Systems and Networks collects slides and notes from the lectures given in the 2017 Seasonal School Enabling Technologies for the Internet-of-Things, supported by IEEE CAS Society and by INTEL funding, and organized by Prof. Sergio Saponara, and Prof. Giuliano Manara. The book discusses new trends in Internet-of-Things (IoT) technologies, considering technological and training aspects, with special focus on electronic and electromagnetic circuits and systems. IoT involves research and design activities both in analog and in digital circuit/signal domains, including focus on sensors interfacing and conditioning, energy harvesting, low-power signal processing, wireless connectivity and networking, functional safety (FuSa). FuSa is one of the emerging key issues in IoT applications in safety critical domain like industry 4.0, autonomous and connected vehicles and e-health. Our world is becoming more and more interconnected. Currently it is estimated that two hundred billion smart objects will be part of the IoT by 2020. This new scenario will pave the way to innovative business models and will bring new experiences in everyday life. The challenge is offering products, services and comprehensive solutions for the IoT, from technology to intelligent and connected objects and devices to connectivity and data centers, enhancing smart home, smart factory, autonomous driving cars and much more, while at the same time ensuring the highest safety standards. In safety-critical contexts, where a fault could jeopardize the human life, safety becomes a key aspect.

Download or read book Advances in Cybersecurity Management written by Kevin Daimi and published by Springer Nature. This book was released on 2021-06-15 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on a wide range of advances related to IT cybersecurity management. The topics covered in this book include, among others, management techniques in security, IT risk management, the impact of technologies and techniques on security management, regulatory techniques and issues, surveillance technologies, security policies, security for protocol management, location management, GOS management, resource management, channel management, and mobility management. The authors also discuss digital contents copyright protection, system security management, network security management, security management in network equipment, storage area networks (SAN) management, information security management, government security policy, web penetration testing, security operations, and vulnerabilities management. The authors introduce the concepts, techniques, methods, approaches and trends needed by cybersecurity management specialists and educators for keeping current their cybersecurity management knowledge. Further, they provide a glimpse of future directions where cybersecurity management techniques, policies, applications, and theories are headed. The book is a rich collection of carefully selected and reviewed manuscripts written by diverse cybersecurity management experts in the listed fields and edited by prominent cybersecurity management researchers and specialists.

Download or read book Technology Development for Army Unmanned Ground Vehicles written by National Research Council and published by National Academies Press. This book was released on 2003-02-01 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned ground vehicles (UGV) are expected to play a key role in the Army's Objective Force structure. These UGVs would be used for weapons platforms, logistics carriers, and reconnaissance, surveillance, and target acquisition among other things. To examine aspects of the Army's UGV program, assess technology readiness, and identify key issues in implementing UGV systems, among other questions, the Deputy Assistant Secretary of the Army for Research and Technology asked the National Research Council (NRC) to conduct a study of UGV technologies. This report discusses UGV operational requirements, current development efforts, and technology integration and roadmaps to the future. Key recommendations are presented addressing technical content, time lines, and milestones for the UGV efforts.

Download or read book Official Gazette of the United States Patent and Trademark Office written by and published by . This book was released on 2004 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Automotive Cybersecurity written by Silviu Ciuta and published by Silviu Ciuta. This book was released on 2023-10-20 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's fast-paced, interconnected world, the automotive industry stands at the forefront of technological innovation. Modern vehicles are no longer just mechanical marvels; they have evolved into rolling computers on wheels. This transformation has not only revolutionized the driving experience but has also introduced new challenges and vulnerabilities, chief among them being automotive cybersecurity. The Mechanical Era The roots of the automotive industry trace back to the late 19th century, with pioneers like Karl Benz and Henry Ford introducing the world to the marvels of the motor vehicle. In these early days, cars were purely mechanical contraptions, devoid of any digital components. The idea of a "car hack" was inconceivable as there were no computers or electronic control units (ECUs) to compromise. The Emergence of Digital Control The 20th century brought about a pivotal shift as automotive engineers began incorporating electronic systems for improved performance, safety, and comfort. The introduction of the Engine Control Unit (ECU) marked a significant milestone. ECUs allowed for more precise control over engine functions, optimizing fuel efficiency and emissions. As digital technology became more pervasive, ECUs multiplied and evolved to control various aspects of the vehicle, from anti-lock brakes to airbags. Vehicles were becoming increasingly reliant on software and electronic components. This shift enhanced vehicle performance and opened the door to exciting new features, but it also laid the groundwork for cybersecurity concerns. The First Signs of Vulnerability In the early 21st century, automotive cybersecurity entered the public consciousness. Researchers began uncovering vulnerabilities in vehicles' digital systems. The emergence of keyless entry systems and wireless tire pressure monitoring systems raised concerns. These convenience features, while enhancing the driving experience, also presented opportunities for malicious actors to exploit wireless communications. In 2010, researchers demonstrated the remote hijacking of a car's systems, a watershed moment that alerted the industry to the looming threats. It was a wake-up call for manufacturers to recognize that cars, like any other connected devices, could be hacked. Industry Response and Regulations As the threat landscape evolved, the automotive industry mobilized to address cybersecurity concerns. Manufacturers started implementing security measures in their vehicles, and organizations such as the Society of Automotive Engineers (SAE) began developing standards for automotive cybersecurity. These standards aimed to guide manufacturers in securing their vehicles against potential threats.

Download or read book Critical Infrastructure Protection written by Robert F. Dacey and published by DIANE Publishing. This book was released on 2002-02 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because the Fed. gov't. relies on commercial satellites (CS), security threats leading to their disruption or loss would put gov't. functions (incl. communications and info. transmission) at significant risk. The GAO was asked to review, among other things, the techniques used by Fed. agencies to reduce the risk assoc. with using CS, as well as efforts to improve satellite system security undertaken as part of Fed. efforts in critical infrastructure protection. GAO recommends that steps be taken to promote the appropriate development and implementation of policy regarding the security of CS systems. Recommends that CS be identified as a critical infrastructure in the national critical infrastructure protection strategy. Charts and tables.

Download or read book Encyclopedia of Cryptography and Security written by Henk C.A. van Tilborg and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 1457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanded into two volumes, the Second Edition of Springer’s Encyclopedia of Cryptography and Security brings the latest and most comprehensive coverage of the topic: Definitive information on cryptography and information security from highly regarded researchers Effective tool for professionals in many fields and researchers of all levels Extensive resource with more than 700 contributions in Second Edition 5643 references, more than twice the number of references that appear in the First Edition With over 300 new entries, appearing in an A-Z format, the Encyclopedia of Cryptography and Security provides easy, intuitive access to information on all aspects of cryptography and security. As a critical enhancement to the First Edition’s base of 464 entries, the information in the Encyclopedia is relevant for researchers and professionals alike. Topics for this comprehensive reference were elected, written, and peer-reviewed by a pool of distinguished researchers in the field. The Second Edition’s editorial board now includes 34 scholars, which was expanded from 18 members in the First Edition. Representing the work of researchers from over 30 countries, the Encyclopedia is broad in scope, covering everything from authentication and identification to quantum cryptography and web security. The text’s practical style is instructional, yet fosters investigation. Each area presents concepts, designs, and specific implementations. The highly-structured essays in this work include synonyms, a definition and discussion of the topic, bibliographies, and links to related literature. Extensive cross-references to other entries within the Encyclopedia support efficient, user-friendly searches for immediate access to relevant information. Key concepts presented in the Encyclopedia of Cryptography and Security include: Authentication and identification; Block ciphers and stream ciphers; Computational issues; Copy protection; Cryptanalysis and security; Cryptographic protocols; Electronic payment and digital certificates; Elliptic curve cryptography; Factorization algorithms and primality tests; Hash functions and MACs; Historical systems; Identity-based cryptography; Implementation aspects for smart cards and standards; Key management; Multiparty computations like voting schemes; Public key cryptography; Quantum cryptography; Secret sharing schemes; Sequences; Web Security. Topics covered: Data Structures, Cryptography and Information Theory; Data Encryption; Coding and Information Theory; Appl.Mathematics/Computational Methods of Engineering; Applications of Mathematics; Complexity. This authoritative reference will be published in two formats: print and online. The online edition features hyperlinks to cross-references, in addition to significant research.

Download or read book A Compendium of Armaments and Military Hardware Routledge Revivals written by Christopher Chant and published by Routledge. This book was released on 2014-06-03 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1987, The Compendium of Armaments and Military Hardware provides, within a single volume, the salient technical and operational details of the most important weapons. The complete range of hardware used in land, sea and air forces throughout the world at the time of publication is covered, from tanks to rocket systems, helicopters to cruise missiles, alongside full details of size, weight and operational range. The book’s main strength lies in the detail it gives of armament and associated ammunition capabilities, and of the sensors and other electronics required for the weapons to be used effectively. A key title amongst Routledge reference reissues, Christopher Chant’s important work will be of great value to students and professionals requiring a comprehensive and accessible reference guide, as well as to weapons ‘buffs’.

Download or read book Weapon Systems written by and published by . This book was released on 2011 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manuals Combined EOD UXO IED DEMOLITION MATERIALS LAND MINE WARFARE MINE COUNTERMINE OPERATIONS AND PHYSICAL SECURITY OF ARMS AMMUNITION AND EXPLOSIVES written by and published by Jeffrey Frank Jones. This book was released on 2018-01-16 with total page 3737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 3,700 total pages ... The Manuals and Publications included: IMPROVISED EXPLOSIVE DEVICE (IED) W3H0005XQ STUDENT HANDOUT IMPROVISED EXPLOSIVE DEVICE (IED) B3L0487XQ-DM STUDENT HANDOUT MOTORIZED CONVOY OPERATIONS B4P0573XQ-DM STUDENT HANDOUT TECHNICAL MANUAL ARMY AMMUNITION DATA SHEETS FOR DEMOLITION MATERIALS TECHNICAL MANUAL OPERATORS AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) DEMOLITION MATERIALS IMPROVISED EXPLOSIVE DEVICE (IED) DEFEAT LAND-MINE WARFARE OPERATOR'S AND UNIT MAINTENANCE MANUAL FOR LAND MINES TECHNICAL MANUAL DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR LAND MINES TECHNICAL MANUAL OPERATOR'S MANUAL FOR BODY ARMOR SET, INDIVIDUAL COUNTERMINE (BASIC) OPERATOR’S MANUAL MINE FIELD MARKING SET HAND EMPLACEABLE M133 ORDNANCE AND EXPLOSIVES RESPONSE MULTISERVICE PROCEDURES FOR UNEXPLODED ORDNANCE OPERATIONS EOD - MULTI-SERVICE TACTICS, TECHNIQUES, AND PROCEDURES FOR EXPLOSIVE ORDNANCE DISPOSAL IN A JOINT ENVIRONMENT Physical Security of Arms, Ammunition, and Explosives DOD AMMUNITION AND EXPLOSIVES SAFETY STANDARDS INDIVIDUAL TRAINING STANDARDS (ITS) SYSTEM FOR AMMUNITION AND EXPLOSIVE ORDNANCE DISPOSAL OCCUPATIONAL FIELD (OCCFLD) 23 EXPLOSIVE ORDNANCE DISPOSAL (EOD) PROGRAM LIST OF STORAGE AND OUTLOADING DRAWINGS AND AMMUNITION Ammunition and Explosives Safety Standards DOE Explosives Safety Manual Individual Tasks, EQT (Explosives Hazards) Ammunition Handbook: Tactics, Techniques, and Procedures for Munitions Handlers Mine/Countermine Operations Munitions Handling During Deployed Operations – 101