Download or read book Hard X Ray Scanning Microscope Using Nanofocusing Parabolic Refractive Lenses written by Jens Patommel and published by Cuvillier Verlag. This book was released on 2011-01-24 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard x rays come along with a variety of extraordinary properties which make them an excellent probe for investigation in science, technology and medicine. Their large attenuation length in matter opens up the possibility to use hard x-rays for non-destructive investigation of the inner structure of specimens. Medical radiography is one important example of exploiting this feature. Since their discovery by W. C. Röntgen in 1895, a large variety of x-ray analytical techniques have been developed and successfully applied, such as x-ray crystallography, reflectometry, fluorescence spectroscopy, x-ray absorption spectroscopy, small angle x-ray scattering, and many more. Each of those methods reveals information about certain physical properties, but usually, these properties are an average over the complete sample region illuminated by the x rays. In order to obtain the spatial distribution of those properties in inhomogeneous samples, scanning microscopy techniques have to be applied, screening the sample with a small x-ray beam. The spatial resolution is limited by the finite size of the beam. The availability of highly brilliant x-ray sources at third generation synchrotron radiation facilities together with the development of enhanced focusing x-ray optics made it possible to generate increasingly small high intense x-ray beams, pushing the spatial resolution down to the sub-100nm range. During this thesis the prototype of a hard x-ray scanning microscope utilizing microstructured nanofocusing lenses was designed, built, and successfully tested. The nanofocusing x-ray lenses were developed by our research group of the Institute of Structural Physics at the Technische Universität Dresden. The prototype instrument was installed at the ESRF beamline ID 13. A wide range of experiments like fluorescence element mapping, fluorescence tomography, x-ray nano-diffraction, coherent x-ray diffraction imaging, and x-ray ptychography were performed as part of this thesis. The hard x-ray scanning microscope provides a stable x-ray beam with a full width at half maximum size of 50–100nm near the focal plane. The nanoprobe was also used for characterization of nanofocusing lenses, crucial to further improve them. Based on the experiences with the prototype, an advanced version of a hard x-ray scanning microscope is under development and will be installed at the PETRA III beamline P06 dedicated as a user instrument for scanning microscopy. This document is organized as follows. A short introduction motivating the necessity for building a hard x-ray scanning microscope is followed by a brief review of the fundamentals of hard x-ray physics with an emphasis on free-space propagation and interaction with matter. After a discussion of the requirements on the x-ray source for the nanoprobe, the main features of synchrotron radiation from an undulator source are shown. The properties of the nanobeam generated by refractive x-ray lenses are treated as well as a two-stage focusing scheme for tailoring size, flux and the lateral coherence properties of the x-ray focus. The design and realization of the microscope setup is addressed, and a selection of experiments performed with the prototype version is presented, before this thesis is finished with a conclusion and an outlook on prospective plans for an improved microscope setup to be installed at PETRA III.
Download or read book MicroComputed Tomography written by Stuart R. Stock and published by CRC Press. This book was released on 2018-10-03 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the availability of commercial laboratory systems and the emergence of user facilities at synchrotron radiation sources, studies of microcomputed tomography or microCT have increased exponentially. MicroComputed Technology provides a complete introduction to the technology, describing how to use it effectively and understand its results. The first part of the book focuses on methodology, covering experimental methods, data analysis, and visualization approaches. The second part addresses various microCT applications, including porous solids, microstructural evolution, soft tissue studies, multimode studies, and indirect analyses. The author presents a sufficient amount of fundamental material so that those new to the field can develop a relative understanding of how to design their own microCT studies. One of the first full-length references dedicated to microCT, this book provides an accessible introduction to field, supplemented with application examples and color images.
Download or read book Storage Ring Based Inverse Compton X ray Sources written by Benedikt Sebastian Günther and published by Springer Nature. This book was released on 2023-04-13 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents research on novel laboratory-scale synchrotron X-ray sources based on inverse Compton scattering and applications of their X-ray radiation using the Munich Compact Light Source (MuCLS) as an example. It provides an introduction to the theory of this laser-electron interaction, laser resonators and X-ray interactions with matter. On this basis, upgrades to the laser system including the development of a new laser optic, X-ray beam stabilisation and two techniques for fast X-ray energy switching of inverse Compton sources are presented. On the application side, the beamline, designed and developed for the inverse Compton X-ray source at the MuCLS, is described before various techniques and applications are demonstrated at this laboratory-scale synchrotron X-ray facility. Among them are K-edge subtraction imaging, X-ray phase contrast imaging and X-ray absorption spectroscopy. Additionally, a new X-ray microscopy technique, called full-field structured-illumination super-resolution X-ray transmission microscopy, is presented. Apart from research conducted at the MuCLS, this thesis contains an in-depth overview on the state of the art of the various types of inverse Compton X-ray sources that have been realised so far. Accordingly, this thesis may serve as a guide and reference work for researchers working with inverse Compton X-ray sources as well as future users of such devices.
Download or read book X Ray Microscopy written by Chris Jacobsen and published by Cambridge University Press. This book was released on 2019-12-19 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete introduction to x-ray microscopy, covering optics, 3D and chemical imaging, lensless imaging, radiation damage, and applications.
Download or read book Synchrotron Radiation Instrumentation written by Jae-Young Choi and published by American Institute of Physics. This book was released on 2007-02-27 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt: The SRI2006 Proceedings features the most recent developments in present synchrotron radiation sources. It also features up-to-date free electron lasers atphoton energies from the infrared to hard X-rays, beamline instrumentation to transport the radiation to the experiments, as well as experimental techniques to utilize it. Further included are recent experimental results in synchrotron radiation sciences.
Download or read book X ray Micro and Nano focusing written by Ian McNulty and published by SPIE-International Society for Optical Engineering. This book was released on 2001 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Microfabrication of Novel X ray Optics II written by Anatoly A. Snigirev and published by SPIE-International Society for Optical Engineering. This book was released on 2004 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of SPIE present the original research papers presented at SPIE conferences and other high-quality conferences in the broad-ranging fields of optics and photonics. These books provide prompt access to the latest innovations in research and technology in their respective fields. Proceedings of SPIE are among the most cited references in patent literature.
Download or read book Developments in X ray Tomography written by and published by . This book was released on 2006 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoscale Photonic Imaging written by Tim Salditt and published by Springer Nature. This book was released on 2020-06-09 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book, edited and authored by a team of world-leading researchers, provides a broad overview of advanced photonic methods for nanoscale visualization, as well as describing a range of fascinating in-depth studies. Introductory chapters cover the most relevant physics and basic methods that young researchers need to master in order to work effectively in the field of nanoscale photonic imaging, from physical first principles, to instrumentation, to mathematical foundations of imaging and data analysis. Subsequent chapters demonstrate how these cutting edge methods are applied to a variety of systems, including complex fluids and biomolecular systems, for visualizing their structure and dynamics, in space and on timescales extending over many orders of magnitude down to the femtosecond range. Progress in nanoscale photonic imaging in Göttingen has been the sum total of more than a decade of work by a wide range of scientists and mathematicians across disciplines, working together in a vibrant collaboration of a kind rarely matched. This volume presents the highlights of their research achievements and serves as a record of the unique and remarkable constellation of contributors, as well as looking ahead at the future prospects in this field. It will serve not only as a useful reference for experienced researchers but also as a valuable point of entry for newcomers.
Download or read book An Introduction to Synchrotron Radiation written by Philip Willmott, PhD and published by John Wiley & Sons. This book was released on 2011-06-15 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader to the basic concepts of the generation and manipulation of synchrotron light, its interaction with matter, and the application of synchrotron light in the “classical” techniques, while including some of the most modern technological developments. As much as possible, complicated mathematical derivations and formulas are avoided. A more heuristic approach is adopted, whereby the general physical reasoning behind the equations is highlighted. Key features: A general introduction to synchrotron radiation and experimental techniques using synchrotron radiation Contains many detailed “worked examples” from the literature Of interest for a broad audience - synchrotrons are possibly one of the best examples of multidisciplinary research Four-colour presentation throughout
Download or read book Handbook of Optics Third Edition Volume V Atmospheric Optics Modulators Fiber Optics X Ray and Neutron Optics written by Michael Bass and published by McGraw Hill Professional. This book was released on 2009-11-13 with total page 1293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive and up-to-date optics resource available Prepared under the auspices of the Optical Society of America, the five carefully architected and cross-referenced volumes of the Handbook of Optics, Third Edition, contain everything a student, scientist, or engineer requires to actively work in the field. From the design of complex optical systems to world-class research and development methods, this definitive publication provides unparalleled access to the fundamentals of the discipline and its greatest minds. Individual chapters are written by the world's most renowned experts who explain, illustrate, and solve the entire field of optics. Each volume contains a complete chapter listing for the entire Handbook, extensive chapter glossaries, and a wealth of references. This pioneering work offers unprecedented coverage of optics data, techniques, and applications. Volume V covers atmospheric optics, modulators, fiber optics, and x-ray and neutron optics.
Download or read book Handbook of Optics Third Edition 5 Volume Set written by Optical Society of America and published by McGraw Hill Professional. This book was released on 2010-05-18 with total page 6122 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive and up-to-date optics resource available Prepared under the auspices of the Optical Society of America, the five carefully architected and cross-referenced volumes of the Handbook of Optics, Third Edition, contain everything a student, scientist, or engineer requires to actively work in the field. From the design of complex optical systems to world-class research and development methods, this definitive publication provides unparalleled access to the fundamentals of the discipline and its greatest minds. Individual chapters are written by the world's most renowned experts who explain, illustrate, and solve the entire field of optics. Each volume contains a complete chapter listing for the entire Handbook, extensive chapter glossaries, and a wealth of references. This pioneering work offers unprecedented coverage of optics data, techniques, and applications. Volume I covers geometrical and physical optics, polarized light, components, and instruments. Volume II covers design, fabrications, testing, sources, detectors, radiometry, and photometry. Volume III, all in full color, covers vision and vision optics. Volume IV covers optical properties of materials, nonlinear optics, and quantum optics. Volume V covers atmospheric optics, modulators, fiber optics, and x-ray and neutron optics. Visit www.HandbookofOpticsOnline.com to search all five volumes and download a comprehensive index.
Download or read book Wave Optical Simulations of X ray Nano focusing Optics written by Markus Osterhoff and published by Universitätsverlag Göttingen. This book was released on 2012 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Curved x-ray multilayer mirrors focus synchrotron beams down to tens of nano metres. A wave-optical theory describing propagation of two waves in an elliptically curved focusing multilayer mirror is developed in this thesis. Using numerical integration, the layer shapes can be optimised for reflectivity and aberrations. Within this framework, performance of both existing and currently upgraded synchrotron beamlines is simulated. Using a more theoretical model case, limits of the theory are studied. A significant part of this work is dedicated to partial spatial coherence, modelled using the method of stochastic superpositions. Coherence propagation and filtering by x-ray waveguides is shown analytically and numerically. This comprehensive model is put forward that shall help in development and testing of new algorithms for a variety of imaging techniques using coherent x-ray beams. Advanced simulations accounting for real structure effects are compared to experimental data obtained at the GINIX instrument at the coherence beamline P10 at PETRA III, DESY. This thesis presents results of a collaboration between the Georg-August-Universität Göttingen and the European Synchrotron Radiation Facility (ESRF) Grenoble.
Download or read book Handbook of X Ray Spectrometry written by Rene Van Grieken and published by CRC Press. This book was released on 2001-11-27 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Updates fundamentals and applications of all modes of x-ray spectrometry, including total reflection and polarized beam x-ray fluorescence analysis, and synchrotron radiation induced x-ray emission. Promotes the accurate measurement of samples while reducing the scattered background in the x-ray spectrum."
Download or read book Microscopic X Ray Fluorescence Analysis written by Koen H. A. Janssens and published by . This book was released on 2000-06-15 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Table of contents
Download or read book X Ray Diffraction Imaging written by Joel Greenberg and published by CRC Press. This book was released on 2018-11-02 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores novel methods for implementing X-ray diffraction technology as an imaging modality, which have been made possible through recent breakthroughs in detector technology, computational power, and data processing algorithms. The ability to perform fast, spatially-resolved X-ray diffraction throughout the volume of a sample opens up entirely new possibilities in areas such as material analysis, cancer diagnosis, and explosive detection, thus offering the potential to revolutionize the fields of medical, security, and industrial imaging and detection. Featuring chapters written by an international selection of authors from both academia and industry, the book provides a comprehensive discussion of the underlying physics, architectures, and applications of X-ray diffraction imaging that is accessible and relevant to neophytes and experts alike. Teaches novel methods for X-ray diffraction imaging Comprehensive and self-contained discussion of the relevant physics, imaging techniques, system components, and data processing algorithms Features state-of-the-art work of international authors from both academia and industry. Includes practical applications in the medical, industrial, and security sectors
Download or read book Plasmonics written by Ki Young Kim and published by BoD – Books on Demand. This book was released on 2012-10-24 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The title of this book, Plasmonics: Principles and Applications, encompasses theory, technical issues, and practical applications which are of interest for diverse classes of the plasmonics. The book is a collection of the contemporary researches and developments in the area of plasmonics technology. It consists of 21 chapters that focus on interesting topics of modeling and computational methods, plasmonic structures for light transmission, focusing, and guiding, emerging concepts, and applications.
