Download or read book Comprehensive Hard Materials written by Daniele Mari and published by Elsevier. This book was released on 2014-04-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Hard Materials, Three Volume Set deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds. Articles include the technologies of powder production (including their precursor materials), milling, granulation, cold and hot compaction, sintering, hot isostatic pressing, hot-pressing, injection moulding, as well as on the coating technologies for refractory metals, hard metals and hard materials. The characterization, testing, quality assurance and applications are also covered. Comprehensive Hard Materials provides meaningful insights on materials at the leading edge of technology. It aids continued research and development of these materials and as such it is a critical information resource to academics and industry professionals facing the technological challenges of the future. Hard materials operate at the leading edge of technology, and continued research and development of such materials is critical to meet the technological challenges of the future. Users of this work can improve their knowledge of basic principles and gain a better understanding of process/structure/property relationships. With the convergence of nanotechnology, coating techniques, and functionally graded materials to the cognitive science of cemented carbides, cermets, advanced ceramics, super-hard materials and composites, it is evident that the full potential of this class of materials is far from exhausted. This work unites these important areas of research and will provide useful insights to users through its extensive cross-referencing and thematic presentation. To link academic to industrial usage of hard materials and vice versa, this work deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds.
Download or read book Comprehensive Hard Materials written by Daniele Mari and published by Newnes. This book was released on 2014-02-01 with total page 1809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Hard Materials, Three Volume Set deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds. Articles include the technologies of powder production (including their precursor materials), milling, granulation, cold and hot compaction, sintering, hot isostatic pressing, hot-pressing, injection moulding, as well as on the coating technologies for refractory metals, hard metals and hard materials. The characterization, testing, quality assurance and applications are also covered. Comprehensive Hard Materials provides meaningful insights on materials at the leading edge of technology. It aids continued research and development of these materials and as such it is a critical information resource to academics and industry professionals facing the technological challenges of the future. Hard materials operate at the leading edge of technology, and continued research and development of such materials is critical to meet the technological challenges of the future. Users of this work can improve their knowledge of basic principles and gain a better understanding of process/structure/property relationships. With the convergence of nanotechnology, coating techniques, and functionally graded materials to the cognitive science of cemented carbides, cermets, advanced ceramics, super-hard materials and composites, it is evident that the full potential of this class of materials is far from exhausted. This work unites these important areas of research and will provide useful insights to users through its extensive cross-referencing and thematic presentation. To link academic to industrial usage of hard materials and vice versa, this work deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds.
Download or read book Machining of Hard Materials written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-02-24 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard machining is a relatively recent technology that can be defined as a machining operation, using tools with geometrically defined cutting edges, of a work piece that has hardness values typically in the 45-70HRc range. This operation always presents the challenge of selecting a cutting tool insert that facilitates high-precision machining of the component, but it presents several advantages when compared with the traditional methodology based in finish grinding operations after heat treatment of work pieces. Machining of Hard Materials aims to provide the reader with the fundamentals and recent advances in the field of hard machining of materials. All the chapters are written by international experts in this important field of research. They cover topics such as: • advanced cutting tools for the machining of hard materials; • the mechanics of cutting and chip formation; • surface integrity; • modelling and simulation; and • computational methods and optimization. Machining of Hard Materials can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals in machining and related industries. It can also be used as a text for advanced undergraduate or postgraduate students studying mechanical engineering, manufacturing, or materials.
Download or read book Specialty Steels and Hard Materials written by N. R. Comins and published by Elsevier. This book was released on 2013-09-24 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specialty Steels and Hard Materials covers the proceedings of the International Conference on Recent Developments in Specialty Steels and Hard Materials (Materials Development '82). The main focus of the materials in the selection is on the microstructural detail, alloy design, processing technology, applications, and economic viability. The first part of the title presents the invited papers in the conference; this part includes topics such as toughness in high speed steels and hard metals; the use of vanadium in low alloy structural steels; and design of strong, ductile, duplex low alloy steels. The second part of the text covers topics about high strength low alloy steels, stainless steels, and rapid solidification processing. The last part of selection deals with tungsten carbide-cobalt hard metals, non-oxide ceramics, and sintered polycrystalline ultra-hard materials. The book will be of great interest to students, researchers, and practitioners of materials engineering and metallurgy.
Download or read book Machining of Hard Materials written by Manjunath Patel G. C. and published by Springer Nature. This book was released on 2020-02-14 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the potential applications of hard materials as well as the latest trends and challenges in machining hard materials. Models for online monitoring to adjust parameters to obtain desired machining characteristics (i.e. reverse modelling) are discussed in this book. The conflicting requirements (i.e. maximize: material removal rate, roundness and minimize: surface roughness, dimensional ovality, co axiality, tool wear) in machining for industry personal is solved using advanced optimization tools. In addition, the framework for experimental modelling, predictive physic-based forward and reverse process models and optimization for better machining characteristics applicable to industry are proposed.
Download or read book Science of Hard Materials written by R. Viswanadham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the first International Conference on the Science of Hard Materials held in Moran, Wyoming, Aug. 23-28, 1981. The objective of the conference was to review and advance the state of knowledge of the basic physical and chemical properties of hard materials and show how these properties influence performance in a variety of applications. To this end, the 49 con tributed papers and the four keynote papers by Prof. Fischmeister and Drs. Hintermann, Exner and Almond, present an excellent overview of the state of the art in the "science" of hard materials. The contents of these proceedings also reflect the fact that hard metal technology is now well matured and several aspects of the behavior of these materials are well understood and firmly established. Structure-property relationships in this class of materials are currently well known. Pitfalls in some of the traditional test methods have been recognized and new test methods are being developed which discriminate between intrinsic material properties and flaw content and distribution. Application of fracture mechanics, al though a late corner to the hard materials area (as compared to other structural materials), is rapidly gaining acceptance and new fracture toughness test methods are being developed. Application of modern analysis and analytical techniques to these materials has begun and entirely new and unexpected information has been obtained. For a variety of reasons, "hard metals" have dominated the research and development scene of "hard materials".
Download or read book Dynamic Behavior of Soft and Hard Materials Volume 2 written by R. Velmurugan and published by Springer Nature. This book was released on with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructure Property Correlations for Hard Superhard and Ultrahard Materials written by Valentine Kanyanta and published by Springer. This book was released on 2016-05-31 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses microstructure-property correlations and explores key microstructure features and how they affect the properties of a material. The authors discuss the effect of manufacturing and processing routes on microstructure and properties. They identify appropriate microstructure and mechanical characterization techniques essential for developing accurate microstructure-property relationships. The techniques include high resolution imaging methods and properties measurements such as hardness, strength, elastic modulus, and fracture toughness. Current and future trends in hard and superhard material design are revealed by the authors, including nanostructured materials, biomimicry, and novel manufacturing technologies.
Download or read book Computational Modeling From Chemistry To Materials To Biology Proceedings Of The 25th Solvay Conference On Chemistry written by Kurt Wuthrich and published by World Scientific. This book was released on 2020-12-21 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chaired by K Wüthrich (Nobel Laureate in Chemistry, 2002) and co-chaired by B Weckhuysen, this by-invitation-only conference has gathered 39 participants — who are leaders in the field of computational modeling and its applications in Chemistry, Material Sciences and Biology. Highlights of the Conference Proceedings are short, prepared statements by all the participants and the records of lively discussions on the current and future perspectives in the field of computational modeling, from chemistry to materials to biology.
Download or read book Rock Products and Building Materials written by and published by . This book was released on 1914 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Hard Materials written by Daniele Mari and published by Elsevier. This book was released on 2014-02-01 with total page 1806 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Hard Materials deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds. Articles include the technologies of powder production (including their precursor materials), milling, granulation, cold and hot compaction, sintering, hot isostatic pressing, hot-pressing, injection moulding, as well as on the coating technologies for refractory metals, hard metals and hard materials. The characterization, testing, quality assurance and applications are also covered. Comprehensive Hard Materials provides meaningful insights on materials at the leading edge of technology. It aids continued research and development of these materials and as such it is a critical information resource to academics and industry professionals facing the technological challenges of the future. Hard materials operate at the leading edge of technology, and continued research and development of such materials is critical to meet the technological challenges of the future. Users of this work can improve their knowledge of basic principles and gain a better understanding of process/structure/property relationships. With the convergence of nanotechnology, coating techniques, and functionally graded materials to the cognitive science of cemented carbides, cermets, advanced ceramics, super-hard materials and composites, it is evident that the full potential of this class of materials is far from exhausted. This work unites these important areas of research and will provide useful insights to users through its extensive cross-referencing and thematic presentation. To link academic to industrial usage of hard materials and vice versa, this work deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds.
Download or read book Johnson s Materials of Construction written by John Butler Johnson and published by . This book was released on 1919 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Chemistry Physics of Clays and Other Ceramic Materials written by Alfred Broadhead Searle and published by . This book was released on 1924 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ENGINEERING PHYSICS written by S.R. VERMA and published by Ram Prasad Publications(R.P.H.). This book was released on with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Wave Mechanics 2. Diffraction of X-rays by Crystal Planes, Bragg’s Spectrometer, Compton’s Effect 3. Dielectric and Magnetic Properties of Materials 4. Ultrasonic 5. Electromagnetics . Super Conductivity 7. Science and Technology of Nanomaterials APPENDICES
Download or read book Grants and Awards for the Fiscal Year Ended written by National Science Foundation (U.S.) and published by . This book was released on with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Three Dimensional Microfabrication Using Two Photon Polymerization written by Tommaso Baldacchini and published by William Andrew. This book was released on 2019-10-31 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Microfabrication Using Two-Photon Polymerization, Second Edition offers a comprehensive guide to TPP microfabrication and a unified description of TPP microfabrication across disciplines. It offers in-depth discussion and analysis of all aspects of TPP, including the necessary background, pros and cons of TPP microfabrication, material selection, equipment, processes and characterization. Current and future applications are covered, along with case studies that illustrate the book's concepts. This new edition includes updated chapters on metrology, synthesis and the characterization of photoinitiators used in TPP, negative- and positive-tone photoresists, and nonlinear optical characterization of polymers. This is an important resource that will be useful for scientists involved in microfabrication, generation of micro- and nano-patterns and micromachining. - Discusses the major types of nanomaterials used in the agriculture and forestry sectors, exploring how their properties make them effective for specific applications - Explores the design, fabrication, characterization and applications of nanomaterials for new Agri-products - Offers an overview of regulatory aspects regarding the use of nanomaterials for agriculture and forestry
Download or read book Nanodiamond written by Oliver A Williams and published by Royal Society of Chemistry. This book was released on 2014-03-18 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The exceptional mechanical, optical, surface and biocompatibility properties of nanodiamond have gained it much interest. Exhibiting the outstanding bulk properties of diamond at the nanoscale in the form of a film or small particle makes it an inexpensive alternative for many applications. Nanodiamond is the first comprehensive book on the subject. The book reviews the state of the art of nanodiamond films and particles covering the fundamentals of growth, purification and spectroscopy and some of its diverse applications such as MEMS, drug delivery and biomarkers and biosensing. Specific chapters include the theory of nanodiamond, diamond nucleation, low temperature growth, diamond nanowires, electrochemistry of nanodiamond, nanodiamond flexible implants, and cell labelling with nanodiamond particles. Edited by a leading expert in nanodiamonds, this is the perfect resource for those new to, and active in, nanodiamond research and those interested in its applications.
