Download or read book Handbook of Vinyl Formulating written by Richard F Grossman and published by John Wiley & Sons. This book was released on 2008-05-02 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is your starting point and complete guide to polyvinyl chloride (PVC) formulation. It covers the basics of vinyl formulation, starting formulations for compounds, and the latest compounding ingredients. Since publication of the acclaimed first edition, a standard reference used by vinyl technologists around the world, there have been many new developments in vinyl formulation as well as new discoveries and insights into the underlying mechanisms. It's all covered here in the second edition, in one highly readable, expertly organized volume.
Download or read book Handbook of Vinyl Polymers written by Munmaya Mishra and published by CRC Press. This book was released on 2016-04-19 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radical polymerization is one of the most widely used means of producing vinyl polymers, supporting a myriad of commercial uses. Maintaining the quality of the critically acclaimed first edition, the Handbook of Vinyl Polymers: Radical Polymerization, Process, and Technology, Second Edition provides a fully updated, single-volume source on t
Download or read book Handbook of Polyvinyl Chloride Formulating written by Edward J. Wickson and published by Wiley-Interscience. This book was released on 1993-08-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A ready reference describing, in detail, properties of various commercial PVC resins available in the U.S. and Canada and how these, together with additives, are used in formulating PVC. Coverage includes economics of formulating, basic statistics and design of experiments, laboratory compounding and test methods, environmental and health concerns in formulating vinyl compounds. Also contains chapters on dry blending, powder coatings, plastisol and organosol preparation and electron beam radiation curing.
Download or read book PVC Handbook written by Charles E. Wilkes and published by Hanser Gardner Publications. This book was released on 2005 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this single handbook, the editors aim to give a diverse audience of readers a complete account of all aspects of PVC--from monomer manufacture to polymerization; the gamut of such additives as stabilizers, lubricants, plasticizers, impact modifiers, fillers and reinforcing agents; blends and alloys; compounding and processing; characterization; combustion resistance and weatherability; product engineering design; applications; environmental and safety; and finally the PVC industry dynamics. This handbook contains both practical formulation information as well as a mechanistic view of why PVC behaves as it does.
Download or read book PVC written by J. Leadbitter and published by iSmithers Rapra Publishing. This book was released on 1994 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report reviews the composition and synthesis of PVC, composition and formulation technology, compounding and manufacturing technology, and the additional range of materials made possible by blending with other polymers. It is completed by around 500 abstracts selected from the Rapra Polymer Library database.
Download or read book Handbook of Formulating Dermal Applications written by Nava Dayan and published by John Wiley & Sons. This book was released on 2016-12-07 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conceptualization and formulation of skin care products intended for topical use is a multifaceted and evolving area of science. Formulators must account for myriad skin types, emerging opportunities for product development as well as a very temperamental retail market. Originally published as "Apply Topically" in 2013 (now out of print), this reissued detailed and comprehensive handbook offers a practical approach to the formulation chemist's day-to-day endeavors by: Addressing the innumerable challenges facing the chemist both in design and at the bench, such as formulating with/for specific properties; formulation, processing and production techniques; sensory and elegancy; stability and preservation; color cosmetics; sunscreens; Offering valuable guidance to troubleshooting issues regarding ingredient selection and interaction, regulatory concerns that must be addressed early in development, and the extrapolation of preservative systems, fragrances, stability and texture aids; Exploring the advantages and limitations of raw materials; Addressing scale-up and pilot production process and concerns; Testing and Measurements Methods. The 22 chapters written by industry experts such as Roger L. McMullen, Paul Thau, Hemi Nae, Ada Polla, Howard Epstein, Joseph Albanese, Mark Chandler, Steve Herman, Gary Kelm, Patricia Aikens, and Sam Shefer, along with many others, give the reader and user the ultimate handbook on topical product development.
Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2011-07-20 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical reference for all plastics engineers who are seeking to answer a question, solve a problem, reduce a cost, improve a design or fabrication process, or even venture into a new market. Applied Plastics Engineering Handbook covers both polymer basics – helpful to bring readers quickly up to speed if they are not familiar with a particular area of plastics processing – and recent developments – enabling practitioners to discover which options best fit their requirements. Each chapter is an authoritative source of practical advice for engineers, providing authoritative guidance from experts that will lead to cost savings and process improvements. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained along with techniques for testing, measuring, enhancing and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don’t teach you in school, and experienced practitioners evaluating new technologies or getting up to speed on a new field The depth and detail of the coverage of new developments enables engineers and managers to gain knowledge of, and evaluate, new technologies and materials in key growth areas such as biomaterials and nanotechnology This highly practical handbook is set apart from other references in the field, being written by engineers for an audience of engineers and providing a wealth of real-world examples, best practice guidance and rules-of-thumb
Download or read book PVC Compounds and Processing written by Stuart Patrick and published by Rapra Technology. This book was released on 2004-01 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This overview covers the basics of PVC formulation and processing, while extending the information to include the latest developments in materials and technology. PVC processing technologies and fabrication and treatment of PVC are reviewed. Over 400 references from recent literature are cited in the review, which is accompanied by abstracts from the Rapra Polymer Library database, to facilitate further reading.
Download or read book Principles of Polymer Processing written by Zehev Tadmor and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised edition of the classic text on polymer processing The Second Edition brings the classic text on polymer processing thoroughly up to date with the latest fundamental developments in polymer processing, while retaining the critically acclaimed approach of the First Edition. Readers are provided with the complete panorama of polymer processing, starting with fundamental concepts through the latest current industry practices and future directions. All the chapters have been revised and updated, and four new chapters have been added to introduce the latest developments. Readers familiar with the First Edition will discover a host of new material, including: * Blend and alloy microstructuring * Twin screw-based melting and chaotic mixing mechanisms * Reactive processing * Devolatilization--theory, mechanisms, and industrial practice * Compounding--theory and industrial practice * The increasingly important role of computational fluid mechanics * A systematic approach to machine configuration design The Second Edition expands on the unique approach that distinguishes it from comparative texts. Rather than focus on specific processing methods, the authors assert that polymers have a similar experience in any processing machine and that these experiences can be described by a set of elementary processing steps that prepare the polymer for any of the shaping methods. On the other hand, the authors do emphasize the unique features of particular polymer processing methods and machines, including the particular elementary step and shaping mechanisms and geometrical solutions. Replete with problem sets and a solutions manual for instructors, this textbook is recommended for undergraduate and graduate students in chemical engineering and polymer and materials engineering and science. It will also prove invaluable for industry professionals as a fundamental polymer processing analysis and synthesis reference.
Download or read book Polymer Handbook written by Hans-Georg Elias and published by . This book was released on 1966 with total page 1288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brings together a vast amount of physical and chemical data on polymers. Consists of chapter-length data tabulations and extensive bibliographies.
Download or read book Practical Guide to Smoke and Combustion Products from Burning Polymers written by Sergei Levchik and published by Smithers Rapra. This book was released on 2011-03-02 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Practical Guide presents one of the most complete overviews of this important topic, covering smoke generation (including obscuration, toxicity, corrosivity), small and large scale smoke assessment, regulation of smoke, and methods of controlling smoke by plastics formulation. In particular this book focuses on the assessment of fire hazard and fire risks from combustion products and is an important book for plastics processors, regulatory personnel, and fire research and safety engineers. This book presents a state of the art overview of smoke formation from natural and synthetic polymeric materials. Also presented is a discussion on why different commercial polymers have different intrinsic tendencies to generate smoke and ways in which smoke generation can be assessed. Mechanisms and general approaches for decreasing smoke formation are examined.This book also gives an overview of flammability tests for measuring smoke formation. In particular, the criticality of assessing smoke formation in realistic scale is discussed. An overview is provided of regulations, codes and standards for critical application of polymeric materials where smoke generation is controlled. Common commercial approaches to decrease smoke formation in specific polymer systems and for specific applications are also presented. Finally, a balanced opinion on the controversial issue of smoke and associated combustion gases is given.
Download or read book Non halogenated Flame Retardant Handbook written by Alexander B. Morgan and published by John Wiley & Sons. This book was released on 2021-12-09 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: NON-HALOGENATED FLAME RETARDANT HANDBOOK The 2nd edition of the definitive single book of information, regulations, and how to use non-halogenated flame retardant technology. This book focuses on non-halogenated flame retardants with an emphasis on practical and applied issues, and builds upon the 1st edition, but is not just a re-do/re-edit of 1st/sup edition content. While non-halogenated flame retardants have not greatly changed since the 1st edition was published in 2014, there have been enough advances and changes to merit a 2nd edition. The book includes chapters on regulation and drivers for non-halogenated flame retardants, specific chapters on each of the major classes of flame retardants, as well as some newer technologies/niche non-halogenated solutions which are either starting to enter the market (coatings / bio-derived flame retardants) or are at least being studied with enough detail to bring to the attention of the reader. As with the 1st edition, the 2nd edition still takes a practical approach to addressing the narrow subject of non-halogenated flame retardancy. It includes more emphasis on flame retardant selection for specific plastics, practical considerations in flame retardant material design, and what the strengths and limits of these various technologies are. Previous flame retardant material science books have covered non-halogenated flame retardants, but they focus more on how they work rather than how to use them. This book focuses more on the practical uses, hence the title of the book “Handbook”, which should make it of good use to industrial chemists and material scientists. Audience The primary audience is material scientists, industrial chemists, fire safety engineers who have to meet flame retardant needs to sell products. It will also be useful to academics working to develop new flame retardant solutions.
Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over
Download or read book Flame Retardant Polymer Nanocomposites written by Alexander B. Morgan and published by John Wiley & Sons. This book was released on 2007-04-06 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flame Retardant Polymer Nanocomposites takes a comprehensive look at polymer nanocomposites for flame retardancy applications and includes nanocomposite fundamentals (theory, design, synthesis, characterization) as well as polymer flammability fundamentals with emphasis on how nanocomposites affect flammability. The book has practical examples from literature, patents, and existing commercial products. Readers can design new work based upon the material in the book or use it as a handy reference for interpreting existing work and results.
Download or read book Handbook of Pharmaceutical Manufacturing Formulations written by Sarfaraz K. Niazi and published by CRC Press. This book was released on 2004-04-27 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third volume in the six-volume Handbook of Pharmaceutical Manufacturing Formulations, this book covers liquid drugs, which include formulations of non-sterile drugs administered by any route in the form of solutions (monomeric and multimeric), suspensions (powder and liquid), drops, extracts, elixirs, tinctures, paints, sprays, colloidons, emul
Download or read book Paint Technology Handbook written by Rodger Talbert and published by CRC Press. This book was released on 2007-09-27 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern paints and coatings offer an astounding variety of formulations that are used to improve the durability, appearance, and lifespan of countless products. From cars to furniture, computers, and mechanical components, paints and coatings play a vital role in nearly every manufactured product available. Straightforward Guidance for Dev
Download or read book Modern Plastics Handbook written by Charles A. Harper and published by McGraw Hill Professional. This book was released on 2000-03-24 with total page 1258 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art guide to plastic product design, manufacture and application. Edited by Charles A. Harper and sponsored by Modern Plastics, the industry's most prestigious trade magazine, Modern Plastics Handbook packs a wealth of up-to-date knowledge about plastics processes, forms and formulations, design, equipment, testing and recycling. This A-to-Z guide keeps you on top of: *Properties and performance of thermoplastics, polymer blends...thermosets, reinforced plastics and composites...natural and synthetic elastomers *Processes from extrusion, injection and blow molding to thermoforming, foam processing, hand lay-up and filament winding, and many, many more *Fabricating...post-production finishing and bonding...coatings and finishes, subjects difficult to find treated elsewhere in print *More!
