Download or read book Handbook of Theoretical and Computational Nanotechnology Atomistic simulations algorithms and methods written by Michael Rieth and published by . This book was released on 2006 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theoretical and Computational Nanotechnology written by Michael Rieth and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Nanotechnology written by Sarhan M. Musa and published by CRC Press. This book was released on 2018-09-03 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of nanotechnology continue to fuel significant innovations in areas ranging from electronics, microcomputing, and biotechnology to medicine, consumer supplies, aerospace, and energy production. As progress in nanoscale science and engineering leads to the continued development of advanced materials and new devices, improved methods of modeling and simulation are required to achieve a more robust quantitative understanding of matter at the nanoscale. Computational Nanotechnology: Modeling and Applications with MATLAB® provides expert insights into current and emerging methods, opportunities, and challenges associated with the computational techniques involved in nanoscale research. Written by, and for, those working in the interdisciplinary fields that comprise nanotechnology—including engineering, physics, chemistry, biology, and medicine—this book covers a broad spectrum of technical information, research ideas, and practical knowledge. It presents an introduction to computational methods in nanotechnology, including a closer look at the theory and modeling of two important nanoscale systems: molecular magnets and semiconductor quantum dots. Topics covered include: Modeling of nanoparticles and complex nano and MEMS systems Theory associated with micromagnetics Surface modeling of thin films Computational techniques used to validate hypotheses that may not be accessible through traditional experimentation Simulation methods for various nanotubes and modeling of carbon nanotube and silicon nanowire transistors In regard to applications of computational nanotechnology in biology, contributors describe tracking of nanoscale structures in cells, effects of various forces on cellular behavior, and use of protein-coated gold nanoparticles to better understand protein-associated nanomaterials. Emphasizing the importance of MATLAB for biological simulations in nanomedicine, this wide-ranging survey of computational nanotechnology concludes by discussing future directions in the field, highlighting the importance of the algorithms, modeling software, and computational tools in the development of efficient nanoscale systems.
Download or read book Computational Nanoscience written by Elena Bichoutskaia and published by Royal Society of Chemistry. This book was released on 2011-06-09 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscience is one of the most exciting areas of modern physical science as it encompasses a range of techniques rather than a single discipline. It stretches across the whole spectrum of science including: medicine and health, physics, engineering and chemistry. Providing a deep understanding of the behaviour of matter at the scale of individual atoms and molecules, it provides a crucial step towards future applications of nanotechnology. The remarkable improvements in both theoretical methods and computational techniques make it possible for modern computational nanoscience to achieve a new level of chemical accuracy. It is now a discipline capable of leading and guiding experimental efforts rather than just following others. Computational Nanoscience addresses modern challenges in computational science, within the context of the rapidly evolving field of nanotechnology. It satisfies the need for a comprehensive, yet concise and up-to-date, survey of new developments and applications presented by the world's leading academics. It documents major, recent advances in scientific computation, mathematical models and theory development that specifically target the applications in nanotechnology. Suitable for theoreticians, researchers and students, the book shows readers what computational nanoscience can achieve, and how it may be applied in their own work. The twelve chapters cover topics including the concepts behind recent breakthroughs, the development of cutting edge simulation tools, and the variety of new applications.
Download or read book Handbook of Theoretical and Computational Nanotechnology Quantum and molecular computing quantum simulations written by Michael Rieth and published by . This book was released on 2006 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Trends in Computational Nanomechanics written by Traian Dumitrica and published by Springer Science & Business Media. This book was released on 2010-03-14 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trends in Computational Nanomechanics reviews recent advances in analytical and computational modeling frameworks to describe the mechanics of materials on scales ranging from the atomistic, through the microstructure or transitional, and up to the continuum. The book presents new approaches in the theory of nanosystems, recent developments in theoretical and computational methods for studying problems in which multiple length and/or time scales must be simultaneously resolved, as well as example applications in nanomechanics. This title will be a useful tool of reference for professionals, graduates and undergraduates interested in Computational Chemistry and Physics, Materials Science, Nanotechnology.
Download or read book The Handbook of Nanotechnology written by Akhlesh Lakhtakia and published by . This book was released on 2004-09-24 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite some 20 years of research history, nanotechnology is still widely regarded as being at an embryonic stage of development. This text provides guidance on the state of the art to the growing numbers of nanotechnology researchers, helping to shape the contours of both experimental research and theoretical research.
Download or read book Handbook of Theoretical and Computational Nanotechnology Nanodevice modeling and nanoelectronics written by Michael Rieth and published by . This book was released on 2006 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1: Basic Concepts, Nanomachines and Bionanodevices; Volume 2: Atomistic Simulations - Algorithms and Methods; Volume 3: Quantum and Molecular Computing, and Quantum Simulations; Volume 4: Nanomechanics and Multiscale Modeling; Volume 5: Transport Phenomena and Nanoscale Processes; Volume 6: Bioinformatics, Nanomedicine and Drug Delivery; Volume 7: Magnetic Nanostructures and Nano-optics; Volume 8: Functional Nanomaterials, Nanoparticles and Polymer Nanostructures; Volume 9: Nanocomposites, Nano-Assemblies, and Nanosurfaces; Volume 10: Nanodevice Modeling and Nanoelectronics.
Download or read book Nanometer Structures written by Akhlesh Lakhtakia and published by SPIE Press. This book was released on 2004 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a researcher's reference handbook to the many aspects of nanometer structures. Although intended as a source for the serious researcher, novices will find a great deal of interesting content. The theories covered include nanostructured thin films, photonic bandgap structures, quantum dots, carbon nanotubes, atomistic techniques, nanomechanics, nanofluidics, and quantum information processing. Modeling and simulation research on these topics have now reached a stage of maturity.
Download or read book Handbook of Materials Modeling written by Sidney Yip and published by Springer Science & Business Media. This book was released on 2007-11-17 with total page 2903 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first reference of its kind in the rapidly emerging field of computational approachs to materials research, this is a compendium of perspective-providing and topical articles written to inform students and non-specialists of the current status and capabilities of modelling and simulation. From the standpoint of methodology, the development follows a multiscale approach with emphasis on electronic-structure, atomistic, and mesoscale methods, as well as mathematical analysis and rate processes. Basic models are treated across traditional disciplines, not only in the discussion of methods but also in chapters on crystal defects, microstructure, fluids, polymers and soft matter. Written by authors who are actively participating in the current development, this collection of 150 articles has the breadth and depth to be a major contributor toward defining the field of computational materials. In addition, there are 40 commentaries by highly respected researchers, presenting various views that should interest the future generations of the community. Subject Editors: Martin Bazant, MIT; Bruce Boghosian, Tufts University; Richard Catlow, Royal Institution; Long-Qing Chen, Pennsylvania State University; William Curtin, Brown University; Tomas Diaz de la Rubia, Lawrence Livermore National Laboratory; Nicolas Hadjiconstantinou, MIT; Mark F. Horstemeyer, Mississippi State University; Efthimios Kaxiras, Harvard University; L. Mahadevan, Harvard University; Dimitrios Maroudas, University of Massachusetts; Nicola Marzari, MIT; Horia Metiu, University of California Santa Barbara; Gregory C. Rutledge, MIT; David J. Srolovitz, Princeton University; Bernhardt L. Trout, MIT; Dieter Wolf, Argonne National Laboratory.
Download or read book Handbook of Theoretical and Computational Nanotechnology Nanomechanics and multiscale modeling written by Michael Rieth and published by . This book was released on 2006 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Modelling of Nanomaterials written by Panagiotis Grammatikopoulos and published by Elsevier. This book was released on 2020-09-30 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their small size and their dependence on very fast phenomena, nanomaterials are ideal systems for computational modelling. This book provides an overview of various nanosystems classified by their dimensions: 0D (nanoparticles, QDs, etc.), 1D (nanowires, nanotubes), 2D (thin films, graphene, etc.), 3D (nanostructured bulk materials, devices). Fractal dimensions, such as nanoparticle agglomerates, percolating films and combinations of materials of different dimensionalities are also covered (e.g. epitaxial decoration of nanowires by nanoparticles, i.e. 0D+1D nanomaterials). For each class, the focus will be on growth, structure, and physical/chemical properties. The book presents a broad range of techniques, including density functional theory, molecular dynamics, non-equilibrium molecular dynamics, finite element modelling (FEM), numerical modelling and meso-scale modelling. The focus is on each method’s relevance and suitability for the study of materials and phenomena in the nanoscale. This book is an important resource for understanding the mechanisms behind basic properties of nanomaterials, and the major techniques for computational modelling of nanomaterials. Explores the major modelling techniques used for different classes of nanomaterial Assesses the best modelling technique to use for each different type of nanomaterials Discusses the challenges of using certain modelling techniques with specific nanomaterials
Download or read book Handbook of Research on Computational Science and Engineering Theory and Practice written by Leng, J. and published by IGI Global. This book was released on 2011-10-31 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: By using computer simulations in research and development, computational science and engineering (CSE) allows empirical inquiry where traditional experimentation and methods of inquiry are difficult, inefficient, or prohibitively expensive. The Handbook of Research on Computational Science and Engineering: Theory and Practice is a reference for interested researchers and decision-makers who want a timely introduction to the possibilities in CSE to advance their ongoing research and applications or to discover new resources and cutting edge developments. Rather than reporting results obtained using CSE models, this comprehensive survey captures the architecture of the cross-disciplinary field, explores the long term implications of technology choices, alerts readers to the hurdles facing CSE, and identifies trends in future development.
Download or read book Handbook of Nanoscience Engineering and Technology Third Edition written by William A. Goddard III and published by CRC Press. This book was released on 2012-06-12 with total page 1097 pages. Available in PDF, EPUB and Kindle. Book excerpt: In his 1959 address, "There is Plenty of Room at the Bottom," Richard P. Feynman speculated about manipulating materials atom by atom and challenged the technical community "to find ways of manipulating and controlling things on a small scale." This visionary challenge has now become a reality, with recent advances enabling atomistic-level tailoring and control of materials. Exemplifying Feynman’s vision, Handbook of Nanoscience, Engineering, and Technology, Third Edition continues to explore innovative nanoscience, engineering, and technology areas. Along with updating all chapters, this third edition extends the coverage of emerging nano areas even further. Two entirely new sections on energy and biology cover nanomaterials for energy storage devices, photovoltaics, DNA devices and assembly, digital microfluidic lab-on-a-chip, and much more. This edition also includes new chapters on nanomagnet logic, quantum transport at the nanoscale, terahertz emission from Bloch oscillator systems, molecular logic, electronic optics in graphene, and electromagnetic metamaterials. With contributions from top scientists and researchers from around the globe, this color handbook presents a unified, up-to-date account of the most promising technologies and developments in the nano field. It sets the stage for the next revolution of nanoscale manufacturing—where scalable technologies are used to manufacture large numbers of devices with complex functionalities.
Download or read book Computational Nanoscience written by Kálmán Varga and published by Cambridge University Press. This book was released on 2011-04-14 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer simulation is an indispensable research tool in modeling, understanding and predicting nanoscale phenomena. However, the advanced computer codes used by researchers are too complicated for graduate students wanting to understand computer simulations of physical systems. This book gives students the tools to develop their own codes. Describing advanced algorithms, the book is ideal for students in computational physics, quantum mechanics, atomic and molecular physics, and condensed matter theory. It contains a wide variety of practical examples of varying complexity to help readers at all levels of experience. An algorithm library in Fortran 90, available online at www.cambridge.org/9781107001701, implements the advanced computational approaches described in the text to solve physical problems.
Download or read book Handbook of Nanoscience Engineering and Technology written by William A. Goddard III and published by CRC Press. This book was released on 2002-10-29 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology, science, and engineering spearhead the 21st century revolution that is leading to fundamental breakthroughs in the way materials, devices, and systems are understood, designed, made, and used. With contributions from a host of world-class experts and pioneers in the field, this handbook sets forth the fundamentals of nanoelectromech
Download or read book Journal of Nanoscience and Nanotechnology written by and published by . This book was released on 2007 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
