Download or read book Handbook of the EuroLaser Academy written by Dieter Schuöcker and published by Springer Science & Business Media. This book was released on 1998 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 Interaction Phenomena.- 1.1 Introduction.- 1.2 Energy coupling.- 1.3 Interaction phenomena.- 1.4 Significance of coupling and interaction phenomena in laser treatment processes.- 1.5 References.- 2 Materials and Workpiece Classification.- 2.1 General aspects.- 2.2 Crystalline materials.- 2.3 Material classes and their properties.- 2.4 Laser treatment.- 2.5 Testing of materials.- 2.6 Seam geometry workpiece classification.- 2.7 Technological considerations.- 2.8 References.- 3 Cutting.- 3.1 Introduction.- 3.2 Process characteristics, advantages, disadvantages.- 3.3 Principles and theory in laser cutting.- 3.4 Productivity and obtainable cut qualities.- 3.5 Processing parameters.- 3.6 Safety in laser cutting.- 3.7 System types.- 3.8 Industrial applications.- 3.9 References.- 4 Welding.- 4.1 Introduction.- 4.2 Heat sources produced by laser beams.- 4.3 Behaviour of materials during laser welding.- 4.4 Engineering applications.- 4.5 Parameters to consider in the economic analysis of laser welding.- 4.6 References.- 5 Heat Treatment.- 5.1 Introduction.- 5.2. Process systematic of laser surface treatments.- 5.3 Conclusions and final remarks.- 5.4 Acknowledgements.- 5.5 References.- 6 Forming and Rapid Prototyping.- 6.1 The laser forming process.- 6.2 Process simulation.- 6.3 Applications and similar processes.- 6.4 List of variables.- 6.5 References.- 7 Marking and Scribing.- 7.1 Introduction.- 7.2 Marking methods.- 7.3 Systems.- 7.4 Economic aspects.- 7.5 References.- 8 Precision Ablation Processing.- 8.1 Introduction.- 8.2 Ablation mechanisms.- 8.3 Material interactions and applications.- 8.4 Laser ablation systems.- 8.5 Economical aspects.- 8.6 References.- 8.7 List of symbols.- 9 Drilling.- 9.1 Introduction.- 9.2 Mechanisms, models and techniques.- 9.3 Applications in the gas turbine industry.- 9.4 Other applications.- 9.5 References.- 10 Economics.- 10.1 Introduction.- 10.2 The laser process in perspective.- 10.3 Economic factors.- 10.4 Assessment methods.- 10.5 Case studies.- 10.6 Summary.- 10.7 Further reading.- 11 Assessment of Technology.- 11.1 Assessment of laser technology.- 11.2 Competing technologies.- 11.3 Assessment of laser machines.- 11.4 Test methods for laser systems.- 11.5 Quality evaluation of laser processed components.- 11.6 Basic economic considerations.- 11.7 References.- 12 Modelling.- 12.1 Basic equations and techniques.- 12.2 Analytical models.- 12.3 Numerical solutions.- 12.4 Semi quantitative models.- 12.5 References.
Download or read book Handbook of the Eurolaser Academy written by D. Schuocker and published by . This book was released on 2014-01-15 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of the Eurolaser Academy written by D. Schuocker and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Community regards training as a priority area and has therefore developed a series of programmes in the field of vocational training. This book is the result of a pilot project selected under two of these Community Action Programmes. It was initially selected under the COMETT programme, concerned with the development of continuing vocational training in the European Community. Moreover, it was one of the few selected projects to receive further funding under a second selection in the context of the LEONARDO DA VINCI Action Programme for the implementation of a European Community Vocational Training policy. It is with great pleasure that I present the outcome of this project which embodies one of the fundamental objectives of the LEONARDO DA VINCI Programme - training for new technologies in SMEs, which make a significant contribution to economic development in Europe. - K DRAXLER, Director Directorate General XXII European Commission
Download or read book Handbook of the Eurolaser Academy written by Dieter Schuocker and published by . This book was released on 1999-12-01 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Laser Technology and Applications written by Colin Webb and published by CRC Press. This book was released on 2020-09-29 with total page 1183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The invention of the laser was one of the towering achievements of the twentieth century. At the opening of the twenty-first century we are witnessing the burgeoning of the myriad technical innovations to which that invention has led. The Handbook of Laser Technology and Applications is a practical and long-lasting reference source for scientists and engineers who work with lasers. The Handbook provides, a comprehensive guide to the current status of lasers and laser systems; it is accessible to science or engineering graduates needing no more than standard undergraduate knowledge of optics. Whilst being a self-contained reference work, the Handbook provides extensive references to contemporary work, and is a basis for studying the professional journal literature on the subject. It covers applications through detailed case studies, and is therefore well suited to readers who wish to use it to solve specific problems of their own. The first of the three volumes comprises an introduction to the basic scientific principles of lasers, laser beams and non-linear optics. The second volume describes the mechanisms and operating characteristics of specific types of laser including crystalline solid - state lasers, semiconductor diode lasers, fibre lasers, gas lasers, chemical lasers, dye lasers and many others as well as detailing the optical and electronic components which tailor the laser's performance and beam delivery systems. The third volume is devoted to case studies of applications in a wide range of subjects including materials processing, optical measurement techniques, medicine, telecommunications, data storage, spectroscopy, earth sciences and astronomy, and plasma fusion research. This vast compendium of knowledge on laser science and technology is the work of over 130 international experts, many of whom are recognised as the world leaders in their respective fields. Whether the reader is engaged in the science, technology, industrial or medical applications of lasers or is researching the subject as a manager or investor in technical enterprises they cannot fail to be informed and enlightened by the wide range of information the Handbook supplies.
Download or read book Handbook of Laser Technology and Applications Applications written by Colin E. Webb and published by CRC Press. This book was released on 2004 with total page 1218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Laser Technology and Applications Three Volume Set written by Colin Webb and published by CRC Press. This book was released on 2003-12-01 with total page 2779 pages. Available in PDF, EPUB and Kindle. Book excerpt: The invention of the laser was one of the towering achievements of the twentieth century. At the opening of the twenty-first century we are witnessing the burgeoning of the myriad technical innovations to which that invention has led. The Handbook of Laser Technology and Applications is a practical and long-lasting reference source for scientists a
Download or read book Laser Material Processing written by William M. Steen and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: New chapters on bending and cleaning reflect the changes in the field since the last edition, completing the range of practical knowledge about the processes possible with lasers already familiar to users of this well-known text. Professor Steen's lively presentation is supported by a number of original cartoons by Patrick Wright and Noel Ford, which will bring a smile to your face and ease the learning process. From the reviews: "...well organized, and the text is very practical...The engineering community will find this book informative and useful." (OPTICS AND PHOTONICS NEWS, July/August 2005)
Download or read book Handbook of Research on Developments and Trends in Industrial and Materials Engineering written by Sahoo, Prasanta and published by IGI Global. This book was released on 2019-11-01 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today’s modernized world, new research and empirical findings are being conducted and found within various professional industries. The field of engineering is no different. Industrial and material engineering is continually advancing, making it challenging for practitioners to keep pace with the most recent trends and methods. Engineering professionals need a handbook that provides up-to-date research on the newest methodologies in this imperative industry. The Handbook of Research on Developments and Trends in Industrial and Materials Engineering is a collection of innovative research on the theoretical and practical aspects of integrated systems within engineering. This book provides a forum for professionals to understand the advancing methods of engineering. While highlighting topics including operations management, decision analysis, and communication technology, this book is ideally designed for researchers, managers, engineers, industrialists, manufacturers, academicians, policymakers, scientists, and students seeking current research on recent findings and modern approaches within industrial and materials engineering.
Download or read book Recent Advances in Multidisciplinary Applied Physics written by Antonio Mendez-Vilas and published by Elsevier. This book was released on 2005-09-28 with total page 999 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1st International Meeting on Applied Physics (APHYS-2003) succeeded in creating a new international forum for applied physics in Europe, with specific interest in the application of techniques, training, and culture of physics to research areas usually associated with other scientific and engineering disciplines.This book contains a selection of peer-reviewed papers presented at APHYS-2003, held in Badajoz (Spain), from 15th to 18th October 2003, which included the following Plenary Lectures:* Nanobiotechnology - Interactions of Cells with Nanofeatured Surfaces and with Nanoparticles* Radiation Protection of Nuclear Workers - Ethical Issues* Chaotic Data Encryption for Optical Communications
Download or read book High Power Lasers in Production Engineering written by Dieter Schuöcker and published by World Scientific Publishing Company. This book was released on 1999-03-03 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: High power lasers of either the gas or solid state type can be used to generate a focal spot with a diameter of about a tenth of a millimetre and a power density of up to 100 Mio W/cm2. With these intensities all materials can be heated up rapidly, leading to fast melting, violent evaporation or even plasma formation. So laser beams can be utilized for various processing tasks, such as transformation hardening, cutting and ablation or welding and cladding or even rapid prototyping. With these processes, important advantages are achieved compared to conventional tools such as high processing speed due to the high concentration of energy and high quality of the processed workpiece without deformations due to the small overall heat input to the workpiece that corresponds to the small spot diameter. All these advantages finally result in strongly reduced production costs, which is the main reason for a world-wide substitution of conventional processes and other beam tools by laser technology. This monograph offers a great insight into the operation principles of high power laser sources, the phenomena of interaction of laser beams and materials and the mechanisms of the various production processes with lasers — thus enabling production engineers and others to make optimum use of the benefits of laser technology and to understand the technical properties and the physical limitations of this most recent technology (especially in comparison to conventional tools and other beam tools), and providing a sufficient basis for the understanding and use of future developments in this area.
Download or read book High Power Lasers in Production Engineering written by Dieter Schucker and published by World Scientific. This book was released on 1999 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: High power lasers of either the gas or solid state type can be used to generate a focal spot with a diameter of about a tenth of a millimetre and a power density of up to 100 Mio W/cm2. With these intensities all materials can be heated up rapidly, leading to fast melting, violent evaporation or even plasma formation. So laser beams can be utilized for various processing tasks, such as transformation hardening, cutting and ablation or welding and cladding or even rapid prototyping. With these processes, important advantages are achieved compared to conventional tools such as high processing speed due to the high concentration of energy and high quality of the processed workpiece without deformations due to the small overall heat input to the workpiece that corresponds to the small spot diameter. All these advantages finally result in strongly reduced production costs, which is the main reason for a world-wide substitution of conventional processes and other beam tools by laser technology.This monograph offers a great insight into the operation principles of high power laser sources, the phenomena of interaction of laser beams and materials and the mechanisms of the various production processes with lasers ? thus enabling production engineers and others to make optimum use of the benefits of laser technology and to understand the technical properties and the physical limitations of this most recent technology (especially in comparison to conventional tools and other beam tools), and providing a sufficient basis for the understanding and use of future developments in this area.
Download or read book Anniversary Feature Papers written by Steven Y. Liang and published by MDPI. This book was released on 2021-04-15 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Journal of Manufacturing and Materials Processing (JMMP) aims to provide an international forum for the documentation and dissemination of recent, original, and significant research studies in the analysis of processes, equipment, systems, and materials related to material heat treatment, solidification, deformation, addition, removal, welding, and accretion for the industrial fabrication and production of parts, components, and products. The JMMP was established in 2017 and has published more than 300 contributions. It has been listed in the ESCI, Inspec (IET), and Scopus (Elsevier). In celebration of the anniversary of the JMMP, the Editorial Office has put together this Special Issue, which includes several representative papers that reflect the vibrant growth and dynamic trend of research in this field.
Download or read book Advances in Laser Materials Processing written by J. R. Lawrence and published by Woodhead Publishing. This book was released on 2017-09-20 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Laser Materials Processing: Technology, Research and Application, Second Edition, provides a revised, updated and expanded overview of the area, covering fundamental theory, technology and methods, traditional and emerging applications and potential future directions. The book begins with an overview of the technology and challenges to applying the technology in manufacturing. Parts Two thru Seven focus on essential techniques and process, including cutting, welding, annealing, hardening and peening, surface treatments, coating and materials deposition. The final part of the book considers the mathematical modeling and control of laser processes. Throughout, chapters review the scientific theory underpinning applications, offer full appraisals of the processes described and review potential future trends. A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines Explores challenges, potential, and future directions through the continuous development of new, application-specific lasers in materials processing Provides revised, expanded and updated coverage
Download or read book The Cold Spray Materials Deposition Process written by and published by Elsevier. This book was released on 2007-09-21 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The cold spray process produces dense, low oxide coatings which can be used in such diverse applications as corrosion control and metals repair. It has emerged as an important alternative to thermal spray coating techniques in certain areas. This pioneering book reviews both the fundamentals of the process and how it can best be applied in practice. The first part of the book discusses the development of the process together with its advantages and disadvantages in comparison with thermal spray coating techniques. Part two reviews key process parameters such as powders, nozzle design, particle temperature and velocity, and particle/substrate interaction. It also describes portable and stationary cold spray systems. The final part of the book discusses how the cold spray process can be applied in such areas as improved wear, corrosion protection, electromagnetic interference shielding and repair of damaged components. The cold spray materials deposition process is a standard reference on this important process and its industrial applications. Examines the fundamentals of the cold spraying process Assesses how the technique can best be applied in practice Describes portable and stationary cold spray systems
Download or read book Modern Luminescence from Fundamental Concepts to Materials and Applications written by Surender Kumar Sharma and published by Woodhead Publishing. This book was released on 2022-11-23 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Luminescence: From Fundamental Concepts to Materials and Applications, Volume One, Concepts and Luminescence is a multivolume work that reviews the fundamental principles, properties and applications of luminescent materials. Topics addressed include key concepts of luminescence, with a focus on important characterization techniques to understand a wide category of luminescent materials. The most relevant luminescent materials, such as transition metals, rare-earth materials, actinide-based materials, and organic materials are discussed, along with emerging applications of luminescent materials in biomedicine, solid state devices, and the development of hybrid materials. This book is an important introduction to the underlying scientific concepts needed to understand luminescence, such as atomic and molecular physics and chemistry. Other topics explored cover the latest advances in materials characterization methods, such as Raman spectroscopy, ultrafast spectroscopy, nonlinear spectroscopy, and more. Finally, there is a focus on the materials physics of nanophotonics. Includes an overview of the underlying scientific concepts of luminescence, such as quantum theory, physics and historical context Provides the most important materials characterization methods, including Raman spectroscopy, nonlinear spectroscopy, and more for a wide range of luminescent materials Introduces nanophotonics dynamics that are important to keep in mind when designing materials and devices
Download or read book Thermal Energy written by Yatish T. Shah and published by CRC Press. This book was released on 2018-01-12 with total page 1574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book details sources of thermal energy, methods of capture, and applications. It describes the basics of thermal energy, including measuring thermal energy, laws of thermodynamics that govern its use and transformation, modes of thermal energy, conventional processes, devices and materials, and the methods by which it is transferred. It covers 8 sources of thermal energy: combustion, fusion (solar) fission (nuclear), geothermal, microwave, plasma, waste heat, and thermal energy storage. In each case, the methods of production and capture and its uses are described in detail. It also discusses novel processes and devices used to improve transfer and transformation processes.
