Download or read book Handbook of Surgical Planning and 3D Printing written by Paolo Gargiulo and published by Elsevier. This book was released on 2023-04 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Surgical Planning and 3D Printing: Applications, Integration, and New Directions?covers 3D printing and surgical planning from clinical, technical and economic points-of-view. This book fills knowledge gaps by addressing: (1) What type of medical images are needed for 3D printing, and for which specific application? (2) What software should be used to process the images, should the software be considered a medical device? (3) Data protection? (4) What are the possible clinical applications and differences in imaging, segmentation, and 3D printing? And finally, (5) What skills, resources, and organization are needed? Sections cover technologies involved in 3D printing in health: data structure, medical images and segmentation, printing materials and 3d printing, 3D printing and Clinical Applications: orthopedic surgery, neurosurgery, maxillofacial, orthodontistry, surgical guides, integrating 3D printing Service in Hospitals: infrastructures, competences, organization and cost/benefits, and more.
Download or read book Handbook of Surgical Planning and 3D Printing written by Paolo Gargiulo and published by Elsevier. This book was released on 2023-03-23 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Surgical Planning and 3D Printing: Applications, Integration, and New Directions?covers 3D printing and surgical planning from clinical, technical and economic points-of-view. This book fills knowledge gaps by addressing: (1) What type of medical images are needed for 3D printing, and for which specific application? (2) What software should be used to process the images, should the software be considered a medical device? (3) Data protection? (4) What are the possible clinical applications and differences in imaging, segmentation, and 3D printing? And finally, (5) What skills, resources, and organization are needed? Sections cover technologies involved in 3D printing in health: data structure, medical images and segmentation, printing materials and 3d printing, 3D printing and Clinical Applications: orthopedic surgery, neurosurgery, maxillofacial, orthodontistry, surgical guides, integrating 3D printing Service in Hospitals: infrastructures, competences, organization and cost/benefits, and more. Provides a unique insight into a technological process and its applications Heps readers find answers to practical and technical questions concerning 3D printing and surgical planning Presents deep insights into new directions of 3D printing in healthcare and related emerging applications such as bioprinting, biocompatible materials and metal printing for custom-made prosthetic design
Download or read book 3D Printing in Medicine written by Frank J. Rybicki and published by Springer. This book was released on 2017-09-27 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of three-dimensional (3D) printing, addresses the practical aspects of establishing a 3D printing service in a medical facility, and explains the enormous potential value of rendering images as 3D printed models capable of providing tactile feedback and tangible information on both anatomic and pathologic states. Individual chapters also focus on selected areas of applications for 3D printing, including musculoskeletal, craniomaxillofacial, cardiovascular, and neurosurgery applications. Challenges and opportunities related to training, materials and equipment, and guidelines are addressed, and the overall costs of a 3D printing lab and the balancing of these costs against clinical benefits are discussed. Radiologists, surgeons, and other physicians will find this book to be a rich source of information on the practicalities and expanding medical applications of 3D printing.
Download or read book 3D Printing at Hospitals and Medical Centers written by Frank J. Rybicki and published by Springer Nature. This book was released on 2024 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition describes the fundamentals of three-dimensional (3D) printing as applied to medicine and extends the scope of the first edition of 3D Printing in Medicine to include modern 3D printing within Health Care Facilities, also called at the medical "Point-Of-Care" (POC). This edition addresses the practical considerations for, and scope of hospital 3D printing facilities, image segmentation and post-processing for Computer Aided Design (CAD) and 3D printing. The book provides details regarding technologies and materials for medical applications of 3D printing, as well as practical tips of value for physicians, engineers, and technologists. Individual, comprehensive chapters span all major organ systems that are 3D printed, including cardiovascular, musculoskeletal, craniomaxillofacial, spinal, neurological, thoracic, and abdominal. The fabrication of maxillofacial prosthetics, the planning of head and neck reconstructions, and 3D printed medical devices used in cranial reconstruction are also addressed. The second edition also includes guidelines and regulatory considerations, costs and reimbursement for medical 3D printing, quality assurance, and additional applications of CAD such as virtual reality. There is a new Forward written by Ron Kikinis, PhD and a new Afterword written by Michael W. Vannier, MD. This book offers radiologists, surgeons, and other physicians a rich source of information on the practicalities and expanding medical applications of 3D printing. It will also serve engineers, physicist, technologists, and hospital administrators who undertake 3D printing. The second edition is designed as a textbook and is expected to serve in this capacity to fill educational needs in both the medical and engineering sectors.
Download or read book 3D Printing Application in Medical Surgery E Book written by Georgios Tsoulfas and published by Elsevier Health Sciences. This book was released on 2019-11-28 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances and technologies in 3D printing have improved and expanded applications for surgery, biomedical engineering, and nanotechnology. In this concise new title, Drs. Georgios Tsoulfas, Petros I. Bangeas, and Jasjit S. Suri synthesize state-of-the-art information on 3D printing and provide guidance on the optimal application in today’s surgical practice, from evaluation of the technology to virtual reality and future opportunities. Discusses challenges, opportunities, and limitations of 3D printing in the field of surgery. Covers patient and surgical education, ethics and intellectual property, quality and safety, 3D printing as it relates to nanotechnology, tissue engineering, virtual augmented reality, and more. Consolidates today’s available information on this burgeoning topic into a single convenient resource.
Download or read book 3D Printing in Plastic Reconstructive and Aesthetic Surgery written by Luigi Di Rosa and published by Springer Nature. This book was released on 2022-09-19 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy volume illustrates the basics of clinical three-dimensional (3D) printing, addressing the practical aspects of establishing a simple and effective 3D printing service in a medical facility. No longer confined to makers and workshops, this very recent technology has been fast developing and rapid prototyping has proven its potential in the clinical field as well, leading to new approaches. The declared aim of this work is enabling medical professionals to create bespoke anatomical models from a series of CT or MRI images, and assisting them in choosing the best suited 3D printers and materials for each specific clinical need. The text includes original, full-color step-by-step photos for better guidance, and a complete review of related publications in literature. Single chapters devoted to specific areas of 3D printing application, such as rhinoplasty, ear reconstruction, oculoplasty, maxillofacial surgery, as well as for surgical simulations. Contents are completed by a review of the legal aspects and the safety and quality considerations, as well as a thorough examination of the variety of 3D printers, compatible materials as filaments and resins, and including the available online resources. Plastic, Ophthalmologic and Maxillofacial surgeons, and professionals dealing with surgical reconstruction, will find this guide to be a valuable companion for the understanding of 3D printing in clinical practice.
Download or read book A Roadmap from Idea to Implementation written by Hui Chen and published by Createspace Independent Publishing Platform. This book was released on 2016-09-24 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: While 3D printing is a 30-year-old technology, its applications are believed to be still at infancy stage. Expiring patents, lower cost printers and materials, improved healthcare specific software allow for more players to get involve and identify new opportunities in healthcare vertical. Although still a small percentage of total manufacture market share, the tremendous potential of healthcare 3D printing is undeniable. There has been a significant recent increase in the medical community in using 3D printing technology for pre-surgical planning and a variety of other surgical related applications. This book is to achieve three main goals: - To initiate a conversation focusing on how to practically implement 3D printing (additive manufacture) into a healthcare workflow and financial system. - To provide a framework for future discussions on the subject. - To inspire more inputs from this new community to add to our knowledge base and future editions.
Download or read book 3D Printing in Oral Maxillofacial Surgery written by Lobat Tayebi and published by Springer Nature. This book was released on 2021-08-24 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to 3D printing and 3D bioprinting methods and their application in oral and maxillofacial surgeries. Among the 3D printing methods considered are fused deposition modeling, selective laser sintering, photopolymer jetting, powder binder printing, and stereolithography, while the coverage of 3D bioprinting encompasses inkjet, microextrusion, and laser techniques. In each case, the relevance of the technique to oral and maxillofacial surgery is explained. In addition, the available inks and bioinks for 3D printing are reviewed. The roles of soft and hard tissue printing in oral and maxillofacial tissue engineering and the use of 3D printing in multi- and interfacial tissue engineering are then examined in depth. The particular value of 3D printing in the treatment of critically sized defects is discussed separately. Finally, up-to-date information is provided on guided tissue/bone regeneration using 3D printing. The book will be of interest to both oral and maxillofacial surgeons and biomedical engineers.
Download or read book 3D Printing Application in Medical Surgery Volume 2 E Book written by Jasjit S. Suri and published by Elsevier Health Sciences. This book was released on 2021-09-05 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies in 3D printing offer innovative capabilities in surgery, from planning complex operations to providing alternatives to traditional training with more cost-effective outcomes. In 3D Printing: Application in Medical Surgery, Volume 2, Drs. Vasileios N. Papadopoulos, Vassilios Tsioukas, and Jasjit S. Suri bring together up-to-date information on 3D printing and its application in surgical specialties such as hebatobilliary and pancreatic surgery, vascular surgery, orthopedic surgery, obstetrics and gynecology, cardiovascular and thoracic surgery, and more. Discusses challenges and opportunities of 3D printing in the field of surgery. Covers 3D printing and its application in major surgical subspecialties, as well as dentistry, transplantation, global surgery, and diagnostic and interventional radiology. Consolidates today’s available information on this burgeoning topic into a single convenient resource.
Download or read book 3D Printing in Medicine and Surgery written by Daniel J. Thomas and published by Woodhead Publishing. This book was released on 2020-08-14 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Medicine and Surgery: Applications in Healthcare is an advanced book on surgical and enhanced medical applications that can be achieved with 3D printing. It is an essential handbook for medical practitioners, giving access to a range of practical methods, while also focusing on applied knowledge. This comprehensive resource features practical experiments and processes for preparing 3D printable materials. Early chapters cover foundational knowledge and background reading, while later chapters discuss and review the current technologies used to engineer specific tissue types, experiments and methods, medical approaches and the challenges that lie ahead for future research. The book is an indispensable reference guide to the various methods used by current medical practitioners working at the forefront of 3D printing applications in medicine. Provides a detailed introduction and narrative on how 3-D printing can be used towards developing future medicine-based therapies Covers up-to-date methods across a range of application areas for the first time in book form Presents the only book on all current areas of 3D printing in medicine that is catered to a medical rather than engineering audience
Download or read book Virtual Surgical Planning and 3D Printing in Head and Neck Tumor Resection and Reconstruction written by Richard Yuxiong Su and published by Frontiers Media SA. This book was released on 2022-09-19 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Robotic and Image Guided Surgery written by Mohammad Abedin-Nasab and published by Elsevier. This book was released on 2019-09-25 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Robotic and Image-Guided Surgery provides state-of-the-art systems and methods for robotic and computer-assisted surgeries. In this masterpiece, contributions of 169 researchers from 19 countries have been gathered to provide 38 chapters. This handbook is 744 pages, includes 659 figures and 61 videos. It also provides basic medical knowledge for engineers and basic engineering principles for surgeons. A key strength of this text is the fusion of engineering, radiology, and surgical principles into one book. A thorough and in-depth handbook on surgical robotics and image-guided surgery which includes both fundamentals and advances in the field A comprehensive reference on robot-assisted laparoscopic, orthopedic, and head-and-neck surgeries Chapters are contributed by worldwide experts from both engineering and surgical backgrounds
Download or read book 3D Printing in Orthopaedic Surgery written by Matthew Dipaola and published by Elsevier Health Sciences. This book was released on 2018-11-20 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get a quick, expert overview of the role of emerging 3D printing technology in orthopaedic surgery, devices, and implants. This concise resource by Drs. Matthew DiPaola and Felasfa Wodajo provides orthopaedic surgeons and residents with need-to-know information on the clinical applications of 3D printing, including current technological capabilities, guidance for practice, and future outlooks for this fast-growing area. Covers basic principles such as engineering aspects, software, economics, legal considerations, and applications for education and surgery planning. Discusses 3D printing in arthroplasty, trauma and deformity, the adult and pediatric spine, oncology, and more. Includes information on setting up a home 3D printing "plant" and 3D printing biologics. Consolidates today’s available information on this burgeoning topic into a single convenient resource
Download or read book Clinical Atlas of 3D Printing Bone Reconstruction written by Hyun-Guy Kang and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practitioners with comprehensive guidance on the application of 3D printing technology in the bone reconstruction. The 3D printed implants need to be able to maximize function and minimize complications by reinforcing strength and changing shape beyond anatomically identical design. Many of the clinical cases in this book, including pre-operative images, surgical planning, design and fabrication, 3D printing implants and guides, surgery and postoperative images, will suffice to capture the sensation of the 3D printing bone reconstruction. This book is composed of photos with minimum descriptions so that the readers can develop their imaginative view.
Download or read book Handbook of Blockchain Digital Finance and Inclusion Volume 2 written by David Lee Kuo Chuen and published by Academic Press. This book was released on 2017-08-16 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Blockchain, Digital Finance, and Inclusion, Volume 2: ChinaTech, Mobile Security, and Distributed Ledger emphasizes technological developments that introduce the future of finance. Descriptions of recent innovations lay the foundations for explorations of feasible solutions for banks and startups to grow. The combination of studies on blockchain technologies and applications, regional financial inclusion movements, advances in Chinese finance, and security issues delivers a grand perspective on both changing industries and lifestyles. Written for students and practitioners, it helps lead the way to future possibilities. Explains the practical consequences of both technologies and economics to readers who want to learn about subjects related to their specialties Encompasses alternative finance, financial inclusion, impact investing, decentralized consensus ledger and applied cryptography Provides the only advanced methodical summary of these subjects available today
Download or read book 3D Printing in Bone Surgery written by Carmine Zoccali and published by Springer Nature. This book was released on 2022-03-05 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the literature, this is the first book to comprehensively discuss 3D printing applied to bone surgery. It provides both the scientific basics and practical applications, with a special focus on 3D-printed, custom-made titanium prostheses (3DPCMP) used for bone reconstruction following tumor resection. Initially applied to pelvic and scapular prostheses – because of their of highly complex anatomy – this technology is increasingly being adopted in other fields of orthopedics, such as limb surgery, traumatology and degenerative diseases. Throughout the book, experts from various fields share their knowledge, describing 3D printing applied to the reconstruction of different bone segments, reviewing each application and comparing it with traditional reconstruction. They also present real-world case studies from their clinical practice. Uniquely responding to the growing interest surrounding 3D printing for bone reconstruction, this book is invaluable for orthopedic, neuro- , head and neck as well as maxillofacial surgeons wishing to gain insights into this new and promising field.
Download or read book 3D Printing in Medicine written by Deepak M Kalaskar and published by Woodhead Publishing. This book was released on 2017-04-17 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Medicine examines the emerging market of 3D-printed biomaterials and its clinical applications. With a particular focus on both commercial and premarket tools, the book looks at their applications within medicine and the future outlook for the field. The book begins with a discussion of the fundamentals of 3D printing, including topics such as materials, and hardware. Chapters go on to cover applications within medicine such as computational analysis of 3D printed constructs, personalized 3D printing and 3D cell and organ printing. The concluding chapters in the book review the applications of 3D printing in diagnostics, drug development, 3D-printed disease models and 3D printers for surgical practice. With a strong focus on the translation of 3D printing technology to a clinical setting, this book is a valuable resource for scientists and engineers working in biomaterial, biomedical, and nanotechnology based industries and academia. Provides a comprehensive and authoritative overview of all the medical applications of 3D printing biomaterials and technologies Focuses on the emerging market of 3D printed biomaterials in clinical applications Reviews both commercial and under development materials, tools, their applications, and future evolution
