Download or read book Handbook of Re Engineering Software Intensive Systems into Software Product Lines written by Roberto E. Lopez-Herrejon and published by Springer Nature. This book was released on 2022-11-22 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook distils the wealth of expertise and knowledge from a large community of researchers and industrial practitioners in Software Product Lines (SPLs) gained through extensive and rigorous theoretical, empirical, and applied research. It is a timely compilation of well-established and cutting-edge approaches that can be leveraged by those facing the prevailing and daunting challenge of re-engineering their systems into SPLs. The selection of chapters provides readers with a wide and diverse perspective that reflects the complementary and varied expertise of the chapter authors. This perspective covers the re-engineering processes, from planning to execution. SPLs are families of systems that share common assets, allowing a disciplined software reuse. The adoption of SPL practices has shown to enable significant technical and economic benefits for the companies that employ them. However, successful SPLs rarely start from scratch, but instead, they usually start from a set of existing systems that must undergo well-defined re-engineering processes to unleash new levels of productivity and competitiveness. Practitioners will benefit from the lessons learned by the community, captured in the array of methodological and technological alternatives presented in the chapters of the handbook, and will gain the confidence for undertaking their own re-engineering challenges. Researchers and educators will find a valuable single-entry point to quickly become familiar with the state-of-the-art on the topic and the open research opportunities; including undergraduate, graduate students, and R&D engineers who want to have a comprehensive understanding of techniques in reverse engineering and re-engineering of variability-rich software systems.
Download or read book Requirements Engineering Foundation for Software Quality written by Daniel Mendez and published by Springer Nature. This book was released on with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Research on Software Engineering and Productivity Technologies Implications of Globalization written by Ramachandran, Muthu and published by IGI Global. This book was released on 2009-08-31 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides integrated chapters on software engineering and enterprise systems focusing on parts integrating requirements engineering, software engineering, process and frameworks, productivity technologies, and enterprise systems"--Provided by publisher.
Download or read book Model Based Engineering of Collaborative Embedded Systems written by Wolfgang Böhm and published by Springer Nature. This book was released on 2020-12-14 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book presents the results of the "Collaborative Embedded Systems" (CrESt) project, aimed at adapting and complementing the methodology underlying modeling techniques developed to cope with the challenges of the dynamic structures of collaborative embedded systems (CESs) based on the SPES development methodology. In order to manage the high complexity of the individual systems and the dynamically formed interaction structures at runtime, advanced and powerful development methods are required that extend the current state of the art in the development of embedded systems and cyber-physical systems. The methodological contributions of the project support the effective and efficient development of CESs in dynamic and uncertain contexts, with special emphasis on the reliability and variability of individual systems and the creation of networks of such systems at runtime. The project was funded by the German Federal Ministry of Education and Research (BMBF), and the case studies are therefore selected from areas that are highly relevant for Germany’s economy (automotive, industrial production, power generation, and robotics). It also supports the digitalization of complex and transformable industrial plants in the context of the German government's "Industry 4.0" initiative, and the project results provide a solid foundation for implementing the German government's high-tech strategy "Innovations for Germany" in the coming years.
Download or read book Enterprise Information Systems Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2010-09-30 with total page 2042 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume collection, titled Enterprise Information Systems: Concepts, Methodologies, Tools and Applications, provides a complete assessment of the latest developments in enterprise information systems research, including development, design, and emerging methodologies. Experts in the field cover all aspects of enterprise resource planning (ERP), e-commerce, and organizational, social and technological implications of enterprise information systems.
Download or read book INCOSE Systems Engineering Handbook written by INCOSE and published by John Wiley & Sons. This book was released on 2015-06-12 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed and thorough reference on the discipline and practice of systems engineering The objective of the International Council on Systems Engineering (INCOSE) Systems Engineering Handbook is to describe key process activities performed by systems engineers and other engineering professionals throughout the life cycle of a system. The book covers a wide range of fundamental system concepts that broaden the thinking of the systems engineering practitioner, such as system thinking, system science, life cycle management, specialty engineering, system of systems, and agile and iterative methods. This book also defines the discipline and practice of systems engineering for students and practicing professionals alike, providing an authoritative reference that is acknowledged worldwide. The latest edition of the INCOSE Systems Engineering Handbook: Is consistent with ISO/IEC/IEEE 15288:2015 Systems and software engineering—System life cycle processes and the Guide to the Systems Engineering Body of Knowledge (SEBoK) Has been updated to include the latest concepts of the INCOSE working groups Is the body of knowledge for the INCOSE Certification Process This book is ideal for any engineering professional who has an interest in or needs to apply systems engineering practices. This includes the experienced systems engineer who needs a convenient reference, a product engineer or engineer in another discipline who needs to perform systems engineering, a new systems engineer, or anyone interested in learning more about systems engineering.
Download or read book Model based Systems Architecting written by Daniel Krob and published by John Wiley & Sons. This book was released on 2022-06-14 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-based Systems Architecting is a key tool for designing complex industrial systems. It is dedicated to the working systems architects, engineers and modelers, in order to help them master the complex integrated systems that they are dealing with in their day-to-day professional lives. It presents the CESAMES Systems Architecting Method (CESAM), a systems architecting and modeling framework which has been developed since 2003 in close interaction with many leading industrial companies, providing rigorous and unambiguous semantics for all classical systems architecture concepts. This approach is practically robust and easy-to-use: during the last decade, it was deployed in more than 2,000 real system development projects within the industry, and distributed to around 10,000 engineers around the globe.
Download or read book Handbook of Research on Modern Systems Analysis and Design Technologies and Applications written by Syed, Mahbubur Rahman and published by IGI Global. This book was released on 2008-07-31 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides a compendium of terms, definitions, and explanations of concepts in various areas of systems and design, as well as a vast collection of cutting-edge research articles from the field's leading experts"--Provided by publisher.
Download or read book Handbook of Software Engineering Knowledge Engineering written by Shi Kuo Chang and published by World Scientific. This book was released on 2002 with total page 807 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first handbook to cover comprehensively both software engineering and knowledge engineering -- two important fields that have become interwoven in recent years. Over 60 international experts have contributed to the book. Each chapter has been written in such a way that a practitioner of software engineering and knowledge engineering can easily understand and obtain useful information. Each chapter covers one topic and can be read independently of other chapters, providing both a general survey of the topic and an in-depth exposition of the state of the art. Practitioners will find this handbook useful when looking for solutions to practical problems. Researchers can use it for quick access to the background, current trends and most important references regarding a certain topic.The handbook consists of two volumes. Volume One covers the basic principles and applications of software engineering and knowledge engineering.Volume Two will cover the basic principles and applications of visual and multimedia software engineering, knowledge engineering, data mining for software knowledge, and emerging topics in software engineering and knowledge engineering.
Download or read book Clean Code written by Robert C. Martin and published by Pearson Education. This book was released on 2009 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title shows the process of cleaning code. Rather than just illustrating the end result, or just the starting and ending state, the author shows how several dozen seemingly small code changes can positively impact the performance and maintainability of an application code base.
Download or read book Feature Oriented Software Product Lines written by Sven Apel and published by Springer Science & Business Media. This book was released on 2013-10-04 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: While standardization has empowered the software industry to substantially scale software development and to provide affordable software to a broad market, it often does not address smaller market segments, nor the needs and wishes of individual customers. Software product lines reconcile mass production and standardization with mass customization in software engineering. Ideally, based on a set of reusable parts, a software manufacturer can generate a software product based on the requirements of its customer. The concept of features is central to achieving this level of automation, because features bridge the gap between the requirements the customer has and the functionality a product provides. Thus features are a central concept in all phases of product-line development. The authors take a developer’s viewpoint, focus on the development, maintenance, and implementation of product-line variability, and especially concentrate on automated product derivation based on a user’s feature selection. The book consists of three parts. Part I provides a general introduction to feature-oriented software product lines, describing the product-line approach and introducing the product-line development process with its two elements of domain and application engineering. The pivotal part II covers a wide variety of implementation techniques including design patterns, frameworks, components, feature-oriented programming, and aspect-oriented programming, as well as tool-based approaches including preprocessors, build systems, version-control systems, and virtual separation of concerns. Finally, part III is devoted to advanced topics related to feature-oriented product lines like refactoring, feature interaction, and analysis tools specific to product lines. In addition, an appendix lists various helpful tools for software product-line development, along with a description of how they relate to the topics covered in this book. To tie the book together, the authors use two running examples that are well documented in the product-line literature: data management for embedded systems, and variations of graph data structures. They start every chapter by explicitly stating the respective learning goals and finish it with a set of exercises; additional teaching material is also available online. All these features make the book ideally suited for teaching – both for academic classes and for professionals interested in self-study.
Download or read book Software Engineering written by Ian Sommerville and published by Pearson Higher Ed. This book was released on 2011-11-21 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the eBook of the printed book and may not include any media, website access codes, or print supplements that may come packaged with the bound book. Intended for introductory and advanced courses in software engineering. The ninth edition of Software Engineering presents a broad perspective of software engineering, focusing on the processes and techniques fundamental to the creation of reliable, software systems. Increased coverage of agile methods and software reuse, along with coverage of 'traditional' plan-driven software engineering, gives readers the most up-to-date view of the field currently available. Practical case studies, a full set of easy-to-access supplements, and extensive web resources make teaching the course easier than ever. The book is now structured into four parts: 1: Introduction to Software Engineering 2: Dependability and Security 3: Advanced Software Engineering 4: Software Engineering Management
Download or read book Computer Systems and Software Engineering Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2017-12-01 with total page 2124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professionals in the interdisciplinary field of computer science focus on the design, operation, and maintenance of computational systems and software. Methodologies and tools of engineering are utilized alongside computer applications to develop efficient and precise information databases. Computer Systems and Software Engineering: Concepts, Methodologies, Tools, and Applications is a comprehensive reference source for the latest scholarly material on trends, techniques, and uses of various technology applications and examines the benefits and challenges of these computational developments. Highlighting a range of pertinent topics such as utility computing, computer security, and information systems applications, this multi-volume book is ideally designed for academicians, researchers, students, web designers, software developers, and practitioners interested in computer systems and software engineering.
Download or read book Object oriented Reengineering Patterns written by Serge Demeyer and published by Lulu.com. This book was released on 2009 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Object-Oriented Reengineering Patterns collects and distills successful techniques in planning a reengineering project, reverse-engineering, problem detection, migration strategies and software redesign. This book is made available under the Creative Commons Attribution-ShareAlike 3.0 license. You can either download the PDF for free, or you can buy a softcover copy from lulu.com. Additional material is available from the book's web page at http://scg.unibe.ch/oorp
Download or read book The New Software Engineering written by Sue A. Conger and published by Wadsworth Publishing Company. This book was released on 1994 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is written with a business school orientation, stressing the how to and heavily employing CASE technology throughout. The courses for which this text is appropriate include software engineering, advanced systems analysis, advanced topics in information systems, and IS project development. Software engineer should be familiar with alternatives, trade-offs and pitfalls of methodologies, technologies, domains, project life cycles, techniques, tools CASE environments, methods for user involvement in application development, software, design, trade-offs for the public domain and project personnel skills. This book discusses much of what should be the ideal software engineer's project related knowledge in order to facilitate and speed the process of novices becoming experts. The goal of this book is to discuss project planning, project life cycles, methodologies, technologies, techniques, tools, languages, testing, ancillary technologies (e.g. database) and CASE. For each topic, alternatives, benefits and disadvantages are discussed.
Download or read book The Cambridge Handbook of Computing Education Research written by Sally A. Fincher and published by . This book was released on 2019-02-13 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an authoritative introduction to Computing Education research written by over 50 leading researchers from academia and the industry.
Download or read book MITRE Systems Engineering Guide written by and published by . This book was released on 2012-06-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
