Download or read book Handbook of Procedures Reliability and Maintainability Monitoring Program for the Marine Air Command and Control System MACCS written by ARINC RESEARCH CORP ANNAPOLIS MD. and published by . This book was released on 1974 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this program is to provide an independent and objective monitoring of the failure and maintenance problems of the Marine Air Command and Control System (MACCS). The specific portions of the MACCS being monitored are the Tactical Air Command Central, AN/TYQ-1; the Tactical Air Operations Central, AN/TYQ-2; the Tactical Data Communications Central, AN/TYQ-3; the Radar Set, AN/TYQ-32; and other equipments associated with these systems. This is being accomplished by monitoring actual performance data relative to design objectives, identifying problem areas, and recommending specific corrective action. This handbook provides the program documentation used to perform the Reliability and Monitoring Program for the MACCS. It consists of a detailed description of the characteristics and features of the MACCS R & M program; a complete list of computer instructions and data used in solving the problem for which the program is designed; the design criteria for the subject program in functional terminology and flow charts showing control flow in the program; and the program operating procedures necessary to perform all aspects of program operation.
Download or read book Technical Abstract Bulletin written by and published by . This book was released on 1978 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook for Reliability and Maintainability Monitors written by United States. Air Force. Systems Command. Electronic Systems Division and published by . This book was released on 1964 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each section of this handbook deals with a particular problem area in (Reliability and Maintainability) matters and suggests methods of initiating and operating an R/M program. The material covered ranges from the basic elements of establishing a program thru the engineering requirements to be evaluated in design reviews. The overall operations involved in monitoring of a contractors program are defined. Several sections deal with the mathematical aspects of Reliability decision making including construction of probability of acceptance curves. (Author).
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1980 with total page 1316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Maintenance Control by Reliability Methods written by United States. Federal Aviation Administration and published by . This book was released on 1978 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Annual Index written by and published by . This book was released on 1980 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability Centered Maintenance Management and Engineering Methods written by R.T. Anderson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the authors provide a fresh look at basic reliability and maintainability engineering techniques and management tools for ap plication to the system maintenance planning and implementation process. The essential life-cycle reliability centered maintenance (ReM) activities are focused on maintenance planning and the prevention of failure. The premise is that more efficient, and therefore effective, life-cycle main tenance programs can be established using a well disciplined decision logic analysis process that addresses individual part failure modes, their consequences, and the actual preventive maintenance tasks. This premise and the techniques and tools described emphasize preventive, not corrective, maintenance. The authors also describe the techniques and tools fundamental to maintenance engineering. They provide an understanding of the inter relationships of the elements of a complete ReM program (which are applicable to any complex system or component and are not limited only to the aircraft industry). They describe special methodologies for improving the maintenance process. These include an on-condition maintenance (OeM) methodology to identify defects and potential deterioration which can determine what is needed as a maintenance action in order to prevent failure during use.
Download or read book The Naval Aviation Maintenance Program NAMP Maintenance data systems written by United States. Office of the Chief of Naval Operations and published by . This book was released on 1990 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability and Maintainability Training Handbook written by United States Navy Department. Bureau of Ships. Navy and published by . This book was released on 1965 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Update to Reliability and Maintainability Planning Guide for Army Aviation Systems and Components written by Peter A. Mihalkanin and published by . This book was released on 1976 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guidebook has been prepared to serve as a tool for the R and M Division of AVSCOM and for Program Managers to use in planning, managing and monitoring R and M programs for aviation systems. Included in the guidebook are basic concepts, program provisions, guidelines, recommendations and specific R and M plans and procedures. The various provisions presented in this guidebook were formulated to meet the specific mission needs of AVSCOM's R and M Division, and are planned for use in support of the acquisition, operation and maintenance of Army aircraft systems and components. The major thrust of the guidebook is directed toward activities that take place during system development and production. Emphasis has been placed on mechanical reliability prediction, reliability growth testing, fault-tree analysis, and production reliability assurance techniques with specific examples applicable to helicopter systems.
Download or read book Maintainability Guide for Design written by United States. Army Materiel Command and published by . This book was released on 1972 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Department of Defense Dictionary of Military and Associated Terms written by United States. Joint Chiefs of Staff and published by . This book was released on 1979 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Reliability centered Maintenance written by Jim August and published by PennWell Books. This book was released on 1999 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: "What's more, August's book translates RCM into terms and language for the everyday maintenance practitioner. While other RCM texts emphasize the original aerospace process, this text addresses the needs of electric power professionals - day-to-day work performance, repair/rework decisions, prioritizing work time, and running facilities."--Jacket.
Download or read book Reliability Centered Maintenance Management and Engineering Methods written by R.T. Anderson and published by Springer. This book was released on 2011-09-26 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the authors provide a fresh look at basic reliability and maintainability engineering techniques and management tools for ap plication to the system maintenance planning and implementation process. The essential life-cycle reliability centered maintenance (ReM) activities are focused on maintenance planning and the prevention of failure. The premise is that more efficient, and therefore effective, life-cycle main tenance programs can be established using a well disciplined decision logic analysis process that addresses individual part failure modes, their consequences, and the actual preventive maintenance tasks. This premise and the techniques and tools described emphasize preventive, not corrective, maintenance. The authors also describe the techniques and tools fundamental to maintenance engineering. They provide an understanding of the inter relationships of the elements of a complete ReM program (which are applicable to any complex system or component and are not limited only to the aircraft industry). They describe special methodologies for improving the maintenance process. These include an on-condition maintenance (OeM) methodology to identify defects and potential deterioration which can determine what is needed as a maintenance action in order to prevent failure during use.
Download or read book Reliability and Maintainability Planning Guide for Army Aviation Systems and Components written by R. T. Anderson and published by . This book was released on 1974 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to Reliability and Maintainability Program Management written by Standards Association of Australia. Committee QR/5, Reliability and Maintainability and published by . This book was released on 1990 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based largely on BS 5760 "Reliability of constructed or manufactured products, systems, equipments and components" Pt. 1 "Guide to reliability and maintainability programme management".
Download or read book An Object Oriented Approach to Reliability and Quality Control Modeling of the Maintenance Effort for U S Marine Corps Ground Combat Equipment written by and published by . This book was released on 1992 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Marine Corps conducts maintenance on combat essential, readiness-reportable ground combat equipment on a continuous basis. This maintenance effort is managed through a standardized database management system, known as the Marine Corps Integrated Maintenance Management System (MIMMS). A method is developed in this thesis which provides the operational commander with an empirically based maintenance forecasting system, using information currently being collected by the MIMMS system, and producing consistently sharper local estimates of individual equipment behavior. With this method, a ground commander can specify a predetermined equipment mixture and an expected exercise duration, based on a general geographic location, and be provided estimates of equipment availability. Thus, he can better manage his maintenance effort and allocation of maintenance resources. Forecasting is done by simulation future repair and failure times from models estimated using available maintenance history data. The simulation is configured to be managed in the MODSIM 11 simulation language (continued) as a series of alternating state changes, for each equipment item, up to a preselected stopping point, which would represent a projected deployment date. Estimates of equipment operational availability are computed from monitored mean failure and repair times in each state. Compilation of the prototype version, simulating six items through three complete transaction groups, is completed in approximately 15 minutes, and execution on an IBM compatible 386-25 based machine concludes in approximately 10 minutes. Object- oriented, Reliability, Quality Control, Simulation Modeling, Maintenance, U.S. Marine Corps, MIMMS.
