Download or read book Handbook of Polyolefins written by Cornelia Vasile and published by CRC Press. This book was released on 2000-06-21 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handbook on polyolefins. This second edition includes new material on the structure, morphology and properties of polyolefin (PO) synthesis. It focuses on synthetic advances, the use of additives, special coverage of PO blends, composites and fibres, and surface treatments. It also addresses the problem of interfacial and superficial phenomena.
Download or read book Handbook of Polyolefins Second Edition written by Cornelia Vasile and published by CRC Press. This book was released on 2000-06-21 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handbook on polyolefins. This second edition includes new material on the structure, morphology and properties of polyolefin (PO) synthesis. It focuses on synthetic advances, the use of additives, special coverage of PO blends, composites and fibres, and surface treatments. It also addresses the problem of interfacial and superficial phenomena.
Download or read book Handbook of Polyolefins Second Edition written by Cornelia Vasile and published by CRC Press. This book was released on 2000-06-21 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handbook on polyolefins. This second edition includes new material on the structure, morphology and properties of polyolefin (PO) synthesis. It focuses on synthetic advances, the use of additives, special coverage of PO blends, composites and fibres, and surface treatments. It also addresses the problem of interfacial and superficial phenomena.
Download or read book Polyolefin Compounds and Materials written by Mariam Al-Ali AlMa'adeed and published by Springer. This book was released on 2015-12-23 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes industrial applications of polyolefins from the researchers' perspective. Polyolefins constitute today arguably the most important class of polymers and polymeric materials for widespread industrial applications. This book summarizes the present state of the art. Starting from fundamental aspects, such as the polymerization techniques to synthesize polyolefins, the book introduces the topic. Basic knowledge about polyolefin composites and blends is explained, before applications aspects in different industry sectors are discussed. The spectrum comprises a wide range of applications and industry sectors, such as the packaging and food industry, the textile industry, automotive and buildings, and even biomedical applications. Topics, which are addressed in the various chapters, comprise synthesis and processing of the materials; their classification; mechanical, physical and technical requirements and properties; their characterization; and many more. In the end of the book, even the disposal, degradation and recycling of polyolefins are addressed, and light is shed on their commercial significance and economic value. In this way, the book follows the entire 'lifetime' of polyolefin compounds and materials: from their synthesis and processing, over applications, to the recycling and reuse of disposed or degraded polyolefin substrates.
Download or read book Handbook of Engineering Polymeric Materials written by P. Cheremisinoff and published by CRC Press. This book was released on 1997-07-25 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting practical information on new and conventional polymers and products as alternative materials and end-use applications, this work details technological advancements in high-structure plastics and elastomers, functionalized materials, and their product applications. The book also provides a comparison of manufacturing and processing techniques from around the world. It emphasizes product characterization, performance attributes and structural properties.
Download or read book Handbook of Engineering and Specialty Thermoplastics Volume 1 written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2010-12-13 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Utilizes an encyclopedic approach to cover the developments in polyolefins and styrenics during the last decade This book focuses on common types of polymers belonging to the class of polyolefins and styrenics. The text is arranged according to the chemical constitution of polymers and reviews the developments that have taken place in the last decade. A brief introduction to the polymer type is given and previous monographs and reviews dealing with the topic are listed for quick reference. The text continues with monomers, polymerization, fabrication techniques, properties, application, as well as safety issues. Providing a rather encyclopedic approach to polyolefins and styrenics, The Handbook of Engineering and Specialty Thermoplastics: Presents a listing of suppliers and commercial grades Reviews current patent literature, essential for the engineer developing new products Contains as extensive tradenames index with information that is fairly unique Concludes with an index of acronyms The Handbook of Engineering and Specialty Thermoplastics: Polyolefins and Styrenics provides a comprehensive reference for chemical engineers and offers advanced students with a textbook for use in courses on chemically biased plastics technology and polymer science.
Download or read book Polyolefins written by James Lindsay White and published by . This book was released on 2005 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Thermoplastic Elastomers written by Jiri George Drobny and published by Elsevier. This book was released on 2014-05-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermoplastic Elastomers, Second Edition presents a comprehensive working knowledge of thermoplastic elastomers (TPEs), providing an essential introduction for those learning the basics, but also detailed engineering data and best practice guidance for those already involved in polymerization, processing, and part manufacture. TPEs use short, cost-effective production cycles, with reduced energy consumption compared to other polymers, and are used in a range of industries including automotive, medical, construction and many more. This handbook provides all the practical information engineers need to successfully utilize this material group in their products, as well as the required knowledge to thoroughly ground themselves in the fundamental chemistry of TPEs. The data tables included in this book assist engineers and scientists in both selecting and processing the materials for a given product or application. In the second edition of this handbook, all chapters have been reviewed and updated. New polymers and applications have been added — particularly in the growing automotive and medical fields — and changes in chemistry and processing technology are covered. Provides essential knowledge of the chemistry, processing, properties, and applications for both new and established technical professionals in any industry utilizing TPEs Datasheets provide "at-a-glance" processing and technical information for a wide range of commercial TPEs and compounds, saving readers the need to contact suppliers Includes data on additional materials and applications, particularly in automotive and medical industries
Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2016-09-15 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Materials, and Applications, Second Edition, covers both the polymer basics that are helpful to bring readers quickly up-to-speed if they are not familiar with a particular area of plastics processing and the recent developments that enable practitioners to discover which options best fit their requirements. New chapters added specifically cover polyamides, polyimides, and polyesters. Hot topics such as 3-D printing and smart plastics are also included, giving plastics engineers the information they need to take these embryonic technologies and deploy them in their own work. With the increasing demands for lightness and fuel economy in the automotive industry (not least due to CAFÉ standards), plastics will soon be used even further in vehicles. A new chapter has been added to cover the technology trends in this area, and the book has been substantially updated to reflect advancements in technology, regulations, and the commercialization of plastics in various areas. Recycling of plastics has been thoroughly revised to reflect ongoing developments in sustainability of plastics. Extrusion processing is constantly progressing, as have the elastomeric materials, fillers, and additives which are available. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. Presents an authoritative source of practical advice for engineers, providing guidance from experts that will lead to cost savings and process improvements Ideal introduction for both new engineers and experienced practitioners entering a new field or evaluating a new technology Updated to include the latest technology, including 3D Printing, smart polymers, and thorough coverage of biopolymers and biodegradable plastics
Download or read book Handbook of Polymers written by George Wypych and published by Elsevier. This book was released on 2022-03-19 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Polymers, Third Edition represents an update on available data, including new values for many commercially available products, verification of existing data, and removal of older data where it is no longer useful. Polymers selected for this edition include all primary polymeric materials used by the plastics and chemical industries and specialty polymers used in the electronics, pharmaceutical, medical and aerospace fields, with extensive information also provided on biopolymers. The book includes data on all polymeric materials used by the plastics industry and branches of the chemical industry, as well as specialty polymers in the electronics, pharmaceutical, medical and space fields. The entire scope of the data is divided into sections to make data comparison and search easy, including synthesis, physical, mechanical, and rheological properties, chemical resistance, toxicity, environmental impact, and more. Provides key data on all primary polymeric materials used in a wide range of industries and applications Presents easy-to-access data divided into sections, making comparisons and search simple and intuitive Includes data on general properties, history, synthesis, structure, physical properties, mechanical properties, chemical resistance, flammability, weather stability, toxicity, and more
Download or read book Handbook of Radical Polymerization written by Krzysztof Matyjaszewski and published by John Wiley & Sons. This book was released on 2003-04-14 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Klassische und moderne Verfahren der radikalischen Polymerisation: In diesem handlichen Band finden Sie Antworten auf theoretische und praktische Fragen. Neben grundlegenden Ausführungen zur Einteilung radikalischer Polymere sind Angaben über die wichtigsten experimentellen Verfahren zur Synthese, Reinigung und Charakterisierung von Polymeren enthalten. Interessante Zugabe: ein Abriß der Geschichte der Radikalkettenpolymerisation.
Download or read book Additives for Polyolefins written by Michael Tolinski and published by William Andrew. This book was released on 2015-03-17 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additives for Polyolefins is a unique quick-reference resource for those who create or use polyethylene and polypropylene compounds—the most commercially important family of plastic materials, making up close to half of the volume all plastics produced and used. These polymers would be useless without various additives. The book focuses on polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasises the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. In this new edition, product tables have been updated with the most current product and company names, new case studies have been added, the role of nanofillers is discussed in greater detail, and the book concludes with a discussion on blending and handling additives, along with an entirely new chapter on how engineers can approach the issue of sustainability when choosing an additive. Assesses capabilities and costs of a range of additives to enable engineers and scientists to make the correct selection for their property requirements Provides concise, practical information about the purpose and use of specific additives, fillers, and reinforcements – demystifying the world of additives by providing clear, engineering explanations, and including real-world application case stories Updated to include additional material on nanofillers, blending and handling, and sustainability
Download or read book UHMWPE Biomaterials Handbook written by Steven M. Kurtz and published by Academic Press. This book was released on 2009-04-27 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: UHMWPE Biomaterials Handbook describes the science, development, properties and application of of ultra-high molecular weight polyethylene (UHMWPE) used in artificial joints. This material is currently used in 1.4 million patients around the world every year for use in the hip, knee, upper extremities, and spine. Since the publication of the 1st edition there have been major advances in the development and clinical adoption of highly crosslinked UHMWPE for hip and knee replacement. There has also been a major international effort to introduce Vitamin E stabilized UHMWPE for patients. The accumulated knowledge on these two classes of materials are a key feature of the 2nd edition, along with an additional 19 additional chapters providing coverage of the key engineering aspects (biomechanical and materials science) and clinical/biological performance of UHMWPE, providing a more complete reference for industrial and academic materials specialists, and for surgeons and clinicians who require an understanding of the biomaterials properties of UHMWPE to work successfully on patient applications. The UHMWPE Handbook is the comprehensive reference for professionals, researchers, and clinicians working with biomaterials technologies for joint replacement New to this edition: 19 new chapters keep readers up to date with this fast moving topic, including a new section on UHMWPE biomaterials; highly crosslinked UHMWPE for hip and knee replacement; Vitamin E stabilized UHMWPE for patients; clinical performance, tribology an biologic interaction of UHMWPE State-of-the-art coverage of UHMWPE technology, orthopedic applications, biomaterial characterisation and engineering aspects from recognised leaders in the field
Download or read book Handbook of Polypropylene and Polypropylene Composites Revised and Expanded written by Harutun Karian and published by CRC Press. This book was released on 2003-03-25 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor with completely revised material and six new chapters, the Handbook of Polypropylene and Polypropylene Composites, Second Edition responds to increasing interest and changing global trends in the manufacture and application of polypropylene resin. The authors highlight viable options for the manufacture of polypropylene composites to better accommodate market requirements across various industries. The second edition introduces chapters on high-purity submicron talc fillers with lamellar microstructures, the utilization of Wollastonite fibers for polypropylene reinforcement, and updated material on nanocomposite production using exfoliated clay treated with maleated polypropylene-based materials, among many other topics.
Download or read book Handbook of Engineering and Specialty Thermoplastics written by Johannes Karl Fink and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on common types of polymers belonging to the class of polyolefins and styrenics. The text is arranged according to the chemical constitution of polymers and reviews the developments that have taken place in the last decade. Each chapter follows the same template. A brief introduction to the polymer type is given and previous monographs and reviews dealing with the topic are listed for quick reference. The text continues with monomers, polymerization, fabrication techniques, properties, application, as well safety issues.
Download or read book Handbook of Thermoplastics written by Olagoke Olabisi and published by CRC Press. This book was released on 2016-02-03 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the bestselling Handbook of Thermoplastics incorporates recent developments and advances in thermoplastics with regard to materials development, processing, properties, and applications. With contributions from 65 internationally recognized authorities in the field, the second edition features new and updated discussions of seve
Download or read book Handbook of Polymer Synthesis Characterization and Processing written by Enrique Saldivar-Guerra and published by John Wiley & Sons. This book was released on 2013-02-28 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a broad range of polymer science topics, Handbook of Polymer Synthesis, Characterization, and Processing provides polymer industry professionals and researchers in polymer science and technology with a single, comprehensive handbook summarizing all aspects involved in the polymer production chain. The handbook focuses on industrially important polymers, analytical techniques, and formulation methods, with chapters covering step-growth, radical, and co-polymerization, crosslinking and grafting, reaction engineering, advanced technology applications, including conjugated, dendritic, and nanomaterial polymers and emulsions, and characterization methods, including spectroscopy, light scattering, and microscopy.
