Download or read book Handbook of Plastics Analysis written by Hubert Lobo and published by CRC Press. This book was released on 2003-06-25 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics possess properties that have revolutionized the manufacture of products in the 20th century and beyond. It remains critical to understand their behavior throughout their life cycle, from manufacture to use and eventually to reclamation and disposal. This volume highlights the most prominent tools in physical and chemical analysis techniques and applications. A practical reference for performing measurements, solving problems, and investigating behavioral phenomena, the editors advocate a phenomenological approach, relying on case studies and illustrations to represent possible outcomes of each technique and presenting the basic governing equations where necessary.

Download or read book Handbook of Plastics Analysis written by Hubert Lobo and published by CRC Press. This book was released on 2003-06-25 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics possess properties that have revolutionized the manufacture of products in the 20th century and beyond. It remains critical to understand their behavior throughout their life cycle, from manufacture to use and eventually to reclamation and disposal. This volume highlights the most prominent tools in physical and chemical analysis techniques and applications. A practical reference for performing measurements, solving problems, and investigating behavioral phenomena, the editors advocate a phenomenological approach, relying on case studies and illustrations to represent possible outcomes of each technique and presenting the basic governing equations where necessary.

Download or read book Handbook for the Chemical Analysis of Plastic and Polymer Additives Second Edition written by Michael Bolgar and published by CRC Press. This book was released on 2015-09-25 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers have undoubtedly changed the world through many products that improve our lives. However, additives used to modify the overall characteristics of these materials may not be fully disclosed or understood. These additives may present possible environmental and health hazards. It is important to monitor consumer products for these compounds using high-quality reference materials and dependable analytical techniques. The Handbook for the Chemical Analysis of Plastic and Polymer Additives, Second Edition provides the necessary tools for chemists to obtain a more complete listing of additives present in a particular polymeric matrix. It is designed to serve as a valuable source for those monitoring a polymer/plastic material for regulatory or internal compliance. It also helps analysts to correctly identify the complex nature of the materials that have been added to the polymer/plastic. With 50 additional compounds, this second edition nearly doubles the number of additives in several categories, including processing aids, antistatic compounds, mould release products, and blowing agents. It includes a listing that can be cross-referenced by trade name, chemical name, CAS number, and even key mass unit ions from the GC/MS run. Addressing additives from an analytical viewpoint, this comprehensive handbook helps readers identify the additives in plastics. This information can be used to assess compliance with regulations issued by the FDA, US EPA, EU, and other agencies.

Download or read book Characterization and Failure Analysis of Plastics written by ASM International and published by ASM International. This book was released on 2003-01-01 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selection and application of engineered materials is an integrated process that requires an understanding of the interaction between materials properties, manufacturing characteristics, design considerations, and the total life cycle of the product. This reference book on engineering plastics provides practical and comprehensive coverage on how the performance of plastics is characterized during design, property testing, and failure analysis. The fundamental structure and properties of plastics are reviewed for general reference, and detailed articles describe the important design factors, properties, and failure mechanisms of plastics. The effects of composition, processing, and structure are detailed in articles on the physical, chemical, thermal, and mechanical properties. Other articles cover failure mechanisms such as: crazing and fracture; impact loading; fatigue failure; wear failures, moisture related failure; organic chemical related failure; photolytic degradation; and microbial degradation. Characterization of plastics in failure analysis is described with additional articles on analysis of structure, surface analysis, and fractography.

Download or read book Handbook of Plastics Testing and Failure Analysis written by Vishu Shah and published by John Wiley & Sons. This book was released on 2007-02-26 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in easy-to-read and -use format, this book updates and revises its bestselling predecessor to become the most complete, comprehensive resource on plastics testing. This book has an emphasis on significance of test methods and interpretation of results. The book covers all aspects of plastics testing, failure analysis, and quality assurance - including chapters on identification analysis, failure analysis, and case studies. The book concludes with a substantial appendix with useful data, charts and tables for ready reference. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.

Download or read book Handbook of Plastics Testing and Failure Analysis written by Vishu Shah and published by John Wiley & Sons. This book was released on 2020-12-22 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in easy-to-read and -use format, this book provides a strong training resource and reference for product designers using plastics in their products – helping them identify, quantify, and confirm whether problems are related to product design or process. • Updates coverage of data analysis techniques and examples and expands coverage of failure analysis, key because of increased litigation related to product liability • Overviews plastic testing methods and the framework to investigate causes of plastic part failure • Provides a strong training resource and reference for product designers using plastics in their products • Features a video tour of a plastics testing labroatory on a companion website and has a separate manual of problems and solutions that are appropriate for college professors using the book as a class textbook

Download or read book Handbook of Plastic Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: An outstanding and thorough presentation of the complete field of plastics processing Handbook of Plastic Processes is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given product while enabling users to better understand the performance characteristics of each process. The authors, all experts in their fields, explain in clear, concise, and practical terms the advantages, uses, and limitations of each process, as well as the most modern and up-to-date technologies available in their application. Coverage includes chapters on: Injection molding Compression and transfer molding Sheet extrusion Blow molding Calendering Foam processing Reinforced plastics processing Liquid resin processing Rotational molding Thermoforming Reaction injection molding Compounding, mixing, and blending Machining and mechanical fabrication Assembly, finishing, and decorating Each chapter details a particular process, its variations, the equipment used, the range of materials utilized in the process, and its advantages and limitations. Because of its increasing impact on the industry, the editor has also added a chapter on nanotechnology in plastics processing.

Download or read book Handbook of Plastics Failure Analysis written by Friedrich Kurr and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2015-01-15 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: With 588 images and associated analyses for avoidance of damage to plastics, this manual is aimed at both professionals and students. Many technical terms and colloquial descriptions, explanations, and interconnections with related areas, together with the images, facilitate the reader in determining and describing the exact type of damage of a given sample. The images, from microscopic quality and damage analysis of molding materials, semi-finished products, and molded parts, are divided into 74 subject areas of plastics processing and application, and are classified based on over 2620 industry-standard technical terms. The analyses were performed with various light microscopes and a scanning electron microscope.

Download or read book Handbook of Plastics Failure Analysis written by Friedrich Kurr and published by Hanser Pub Incorporated. This book was released on 2015-01-15 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: With 588 full-color images and associated analyses for identification and avoidance of damage to plastics, this manual is aimed at both professionals and students. Technical terms and colloquial descriptions are explained and interconnected with the images and each other, assisting the reader in determining and describing the exact type of damage of a given sample. The images--from microscopic quality and damage analysis of molding materials, semi-finished products, and molded parts-- are divided into 74 subject areas of plastics processing and application and classified based on an alphabetical glossary of over 2,620 industry-standard technical terms. The analyses were performed with various light microscopes and a scanning electron microscope. This comprehensive book offers expert advice based on Kurr's 35+ years of experience in both teaching and research and development.

Download or read book Plastics Product Design Engineering Handbook written by Sidney Levy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics have become increasingly important in the products used in our society, ranging from housing to packaging, transportation, business machines and especially in medicine and health products. Designing plastic parts for this wide range of uses has become a major activity for designers, architects, engineers, and others who are concerned with product development. Because plastics are unique materials with a broad range of proper ties they are adaptable to a variety of uses. The uniqueness of plastics stems from their physical characteristics which are as different from metals, glasses, and ceramics as these materials are different from each other. One major concern is the design of structures to take loads. Metals as well as the other materials are assumed to respond elastically and to recover completely their original shape after the load is removed. Based on this simple fact, extensive litera ture on applied mechanics of materials has been developed to enable designers to predict accurately the performance of structures under load. Many engineers depend on such texts as Timoshenko's Strength of Materials as a guide to the performance of structures. Using this as a guide, generations of engineers have designed economical and safe structural parts. Unfortunately, these design principles must be modified when designing with plastics since they do not respond elastically to stress and undergo permanent deformation with sus tained loading.

Download or read book Handbook of Plastics Testing Technology written by Vishu Shah and published by Wiley-Interscience. This book was released on 1998-11-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the reviews of the bestselling First Edition: "A very useful contribution to the plastics industry. Mr. Shah has successfully filled a void between the identification of a test method, implementation of the test, and some understanding of the meaning of the results. . . . All in all, a job well done." -Polymer News "Provides a practical source for plastics testing . . . The appendices will prove invaluable." -SAMPE Journal. Sponsored by the Society of Plastics Engineers, the Handbook of Plastics Testing Technology, Second Edition is a valuable working resource for anyone involved with manufacturing, testing, studying, or developing plastics. Thoroughly updated and expanded with more than thirty-five percent new material, this new edition of the 1984 classic provides practical information on all aspects of contemporary plastics testing in a highly accessible, nonmathematical form. Following a concise introduction to basic concepts, the book moves straight to practical discussions of the full gamut of testing issues, including thermal, mechanical, weathering, optical, electrical, and chemical properties; materials characterization; flammability; analytical tests; quality control; product liability testing; failure analysis; nondestructive testing; and more. Rather than simply describing test procedures, the author clearly explains the broader significance of each test and the results it yields for engineers and materials scientists working in industry today. Professionals will also appreciate the Handbook's closing chapters and appendices, which offer a wide range of useful information on professional and testing organizations, uniform global testing standards, equipment manufacturers, trade publications, independent testing laboratories, and plastics specifications.

Download or read book Handbook of Biopolymers and Biodegradable Plastics written by Sina Ebnesajjad and published by William Andrew. This book was released on 2012-12-31 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymers and Biodegradable Plastics are a hot issue across the Plastics industry, and for many of the industry sectors that use plastic, from packaging to medical devices and from the construction indusry to the automotive sector. This book brings together a number of key biopolymer and biodegradable plastics topics in one place for a broad audience of engineers and scientists, especially those designing with biopolymers and biodegradable plastics, or evaluating the options for switching from traditional plastics to biopolymers. Topics covered include preparation, fabrication, applications and recycling (including biodegradability and compostability). Applications in key areas such as films, coatings controlled release and tissue engineering are discussed. Dr Ebnesajjad provides readers with an in-depth reference for the plastics industry – material suppliers and processors, bio-polymer producers, bio-polymer processors and fabricators – and for industry sectors utilizing biopolymers – automotive, packaging, construction, wind turbine manufacturers, film manufacturers, adhesive and coating industries, medical device manufacturers, biomedical engineers, and the recycling industry. Essential information and practical guidance for engineers and scientists working with bioplastics, or evaluating a migration to bioplastics. Includes key published material on biopolymers, updated specifically for this Handbook, and new material including coverage of PLA and Tissue Engineering Scaffolds. Coverage of materials and applications together in one handbook enables engineers and scientists to make informed design decisions.

Download or read book Handbook of Thermal Analysis and Calorimetry written by Michael E. Brown and published by Elsevier Science. This book was released on 2003-12-22 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of a four volume set intended to describe the techniques and applications of thermoanalytical and calorimetric methods. The general techniques and methodology are covered extensively in Volume 1, along with the fundamental physicochemical background needed. Consequently the subsequent volumes dwell on the applications of these powerful and versatile methods, while assuming a familiarity with the techniques. Volume 2 covers major areas of inorganic materials and some related general topics, e.g., catalysis, geochemistry, and the preservation of art. The chapters are written by established practitioners in the field with the intent of presenting a sampling of the how thermoanalytical and calorimetric methods have contributed to progress in their respective areas. The chapters are not intended as exhaustive reviews of the topics, but rather, to illustrate to the readers what has been achieved and to encourage them to consider extending these applications further into their domains of interest. - Provides an appreciation for how thermal methods can be applied to inorganic materials and processes. - Provides an insight into the versatility of thermal methods. - Shares the experiences of experts in a variety of different fields. - A valuable reference source covering a huge area of materials coverage.

Download or read book Handbook of Multicriteria Analysis written by Constantin Zopounidis and published by Springer Science & Business Media. This book was released on 2010-05-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multicriteria analysis is a rapidly growing aspect of operations research and management science, with numerous practical applications in a wide range of fields. This book presents all the recent advances in multicriteria analysis, including multicriteria optimization, goal programming, outranking methods, and disaggregation techniques. The latest developments on robustness analysis, preference elicitation, and decision making when faced with incomplete information, are also discussed, together with applications in business performance evaluation, finance, and marketing. Finally, the interactions of multicriteria analysis with other disciplines are also explored, including among others data mining, artificial intelligence, and evolutionary methods.

Download or read book Handbook of Recycling written by Ernst Worrell and published by Newnes. This book was released on 2014-04-28 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the International Solid Waste Association's 2014 Publication Award, Handbook of Recycling is an authoritative review of the current state-of-the-art of recycling, reuse and reclamation processes commonly implemented today and how they interact with one another. The book addresses several material flows, including iron, steel, aluminum and other metals, pulp and paper, plastics, glass, construction materials, industrial by-products, and more. It also details various recycling technologies as well as recovery and collection techniques. To completely round out the picture of recycling, the book considers policy and economic implications, including the impact of recycling on energy use, sustainable development, and the environment. With contemporary recycling literature scattered across disparate, unconnected articles, this book is a crucial aid to students and researchers in a range of disciplines, from materials and environmental science to public policy studies. Portrays recent and emerging technologies in metal recycling, by-product utilization and management of post-consumer waste Uses life cycle analysis to show how to reclaim valuable resources from mineral and metallurgical wastes Uses examples from current professional and industrial practice, with policy and economic implications

Download or read book Fractography in Failure Analysis of Polymers written by Michael D. Hayes and published by Elsevier. This book was released on 2024-01-12 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractography in Failure Analysis of Polymers, Second Edition, provides a practical guide to the science of fractography and its application in the failure analysis of plastic components. In addition to a brief background on the theory of fractography, the authors discuss the various fractographic tools and techniques used to identify key fracture characteristics. The Second Edition includes additional material related to polymer life prediction testing and analysis. Case studies have been expanded, including a wide range of polymer types, new technologies, applications, and failure modes, as well as best practice guidelines enabling engineers to apply these lessons to their own work. Detailed images and their appropriate context are presented for reference in failure investigations. This text is vital for engineers who must determine the root causes of failure when it occurs, helping them further study the ramifications of product liability claims, environmental concerns, and brand image. This is also a valuable resource for all plastics professionals, including manufacturers, product designers, and consultants, forensic investigators, as well as educators in materials science. Presents comprehensive coverage of applied fractography, enabling improved reliability and longevity of plastic parts and products Includes case studies that demonstrate material selection decisions and how to reduce failure rates Provides best practice on how to analyze the cause of material failures, along with guidelines on improving design and manufacturing decisions

Download or read book Handbook of Plastic Optics written by Stefan Bäumer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of plastic optics instead of glass offers a number of advantages. Most importantly, it is far less expensive, and therefore opens a huge potential for mass production. It also offers the opportunity to use unique element configuration. This book gives a coherent overview over the current status of injection molded optics describing in detail all aspects of plastic optics, from design issues to production technology and quality control. The focus is firmly set on practical applications, making this an indispensable information source for all those working in optics research and development. The contributors, each one a leading expert in his chosen discipline, possess either a background in industry or close relations to the industry, thus bringing in an ample amount of practical experience.