Download or read book Handbook of Natural Polymers Volume 2 written by M.S. Sreekala and published by Elsevier. This book was released on 2024-06-28 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Natural Polymers, Volume Two: Functionalization, Surface Modification, and Properties covers modifications, functionalization, analysis and properties of polymers from natural sources. The book begins by introducing the current state-of-the-art, challenges and opportunities in natural polymers. This is followed by detailed coverage of methods for chemical, physical and surface modifications, and functionalization of natural polymers, including nanocellulose composites, gluten, chitin, alginate, pectin, keratin, shellac, wool, hemicellulose, lignin, natural rubber, albumin, collagen, gelatin, zein, soya protein, silk fibroin, gutta percha and gum. The final chapters explain several other key aspects, such as microscopical and spectroscopical analysis, mechanical, thermal, and more. The book aims to offer potential avenues for the preparation, modification, and implementation of advanced natural polymer-based materials with the desired properties for specific applications. Provides systematic coverage of the latest methods for functionalization, surface modification, and properties' analysis of natural polymers Includes an extensive range of natural polymer sources, including established biopolymers and emerging materials Explores modifications and properties of natural polymers and their related composites, blends, IPNs, gels and nanoparticles
Download or read book Handbook of Natural Fibres written by Ryszard M. Kozlowski and published by Woodhead Publishing. This book was released on 2020-01-25 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Natural Fibres: Volume Two, Processing and Applications, Second Edition provides detailed coverage of the latest processing techniques and industrial applications of a wide range of natural fibers. Natural fibrous resources, both lignocellulosic and protein ones, are renewable, biodegradable, and nontoxic, making them an important source of sustainable textile solutions. A broad range of sources of natural fibers are covered in the book, including flax, hemp, bast, jute, coir, linen, cotton and silk. This wealth of expert information provides a uniquely detailed reference for the processing, characterization, selection and application of natural fibers. Connects natural fibers to a wide range of industries, including construction, automotive, packaging and medical Helps readers appraise natural fibers on the basis of their mechanical, electrokinetic, antimicrobial or flame retardant qualities Provides a rare glimpse of emerging manufacturing methods for silk
Download or read book Handbook of Natural Polymers Volume 3 written by Sreekala Meyyarappallil Sadasivan and published by Elsevier. This book was released on 2023-11-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Natural Polymers Volume 3: Versatile Applications is a comprehensive resource which explores advanced and emerging applications of polymers from natural sources. The book begins by introducing the current state-of-the-art and opportunities in natural polymers with advanced applications, before presenting in-depth coverage of natural polymers as applied to specific cutting-edge applications. Areas covered include biosensing, drug carriers, cosmetics, tissue engineering, textiles, adhesives and coatings, food, super adsorbents, automotive and construction, 3D printing, paper, nanoelectronics, energy storage, military, smart devices, water purification, dentistry, agriculture, and packaging. In each case, a methodical approach enables the reader to understand natural polymer sources, preparation, properties, and appropriate application, discovering emerging materials and new avenues. The final two chapters consider end-of-life themes, including environmental remediation of natural polymers, and their transformation to biofuels. As part of a 3-volume handbook offering comprehensive coverage of natural polymers, this book will be of interest to all those looking to gain a broad knowledge of natural polymers, including academic researchers, scientists, advanced students, engineers, and R&D professionals from a range of disciplines and industries.
Download or read book Handbook of Natural Polymers Volume 1 written by M.S. Sreekala and published by Elsevier. This book was released on 2023-05-31 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Natural Polymers: Sources, Synthesis, and Characterization is a comprehensive resource covering extraction and processing methods for polymers from natural sources, with an emphasis on the latest advances. The book begins by introducing the current state-of-the-art, challenges, and opportunities in natural polymers. This is followed by detailed coverage of extraction, synthesis, and characterization methods, organized by polymer type. Along with broad chapters discussing approaches to polysaccharide-based polymers, dedicated chapters offer in-depth information on nanocellulose, chitin and chitosan, gluten, alginate, natural rubber, gelatin, pectin, lignin, keratin, gutta percha, shellac, silk, wood, casein, albumin, collagen, hemicellulose, polyhydroxyalkanoates, zein, soya protein, and gum. The final chapters explore other key themes, including filler interactions and properties in natural polymer-based composites, biocompatibility and cytotoxicity, biodegradability, life cycle, and recycling. Throughout the book, information is supported by data, and guidance is offered regarding potential scale-up and industry factors. As part of a 3-volume handbook offering comprehensive coverage of natural polymers, this book will be of interest to all those looking to gain a broad knowledge of natural polymers, including academic researchers, scientists, advanced students, engineers, and R&D professionals from a range of disciplines and industries. Provides systematic coverage of the latest methods for the extraction, synthesis, and characterization of natural polymers. Includes an extensive range of natural polymer sources, including established biopolymers and emerging materials. Explores preparation of natural polymers and their composites, blends, IPNs, gels, and nanoparticles.
Download or read book Handbook of Natural Polymers Volume 1 written by M.S. Sreekala and published by Elsevier. This book was released on 2023-06-16 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Natural Polymers: Sources, Synthesis, and Characterization is a comprehensive resource covering extraction and processing methods for polymers from natural sources, with an emphasis on the latest advances. The book begins by introducing the current state-of-the-art, challenges, and opportunities in natural polymers. This is followed by detailed coverage of extraction, synthesis, and characterization methods, organized by polymer type. Along with broad chapters discussing approaches to polysaccharide-based polymers, dedicated chapters offer in-depth information on nanocellulose, chitin and chitosan, gluten, alginate, natural rubber, gelatin, pectin, lignin, keratin, gutta percha, shellac, silk, wood, casein, albumin, collagen, hemicellulose, polyhydroxyalkanoates, zein, soya protein, and gum. The final chapters explore other key themes, including filler interactions and properties in natural polymer-based composites, biocompatibility and cytotoxicity, biodegradability, life cycle, and recycling. Throughout the book, information is supported by data, and guidance is offered regarding potential scale-up and industry factors. As part of a 3-volume handbook offering comprehensive coverage of natural polymers, this book will be of interest to all those looking to gain a broad knowledge of natural polymers, including academic researchers, scientists, advanced students, engineers, and R&D professionals from a range of disciplines and industries.
Download or read book Handbook of Biodegradable Polymers written by Abraham J. Domb and published by CRC Press. This book was released on 1998-02-04 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Biodegradable Polymers, the seventh volume in the Drug Delivery and Targeting book series, provides a source manual for synthetic procedures, properties and applications of bioerodible polymers. The authors describe widely available materials such as polyactides, collagen and gelatin, as well as polymers of emerging importance, such as the genetically-engineered and elastin-based polymers which are either proprietary or in early stages of development. Section I addresses synthetic absorbable polymers, and Section 2 profiles natural, semi-synthetic and biosynthetic polymers. Section 3 discusses the surface characterization of degradable polymers, the modeling of biodegradation and non-medical polymers. This book is ideal for researchers from academia and industry as well as chemists, pharmacists and physicians who deal with biopolymers, drug delivery and targeting, bioengineering and implantable devices.
Download or read book Handbook of Biopolymers and Biodegradable Plastics written by Sina Ebnesajjad and published by William Andrew. This book was released on 2012-12-31 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymers and Biodegradable Plastics are a hot issue across the Plastics industry, and for many of the industry sectors that use plastic, from packaging to medical devices and from the construction indusry to the automotive sector. This book brings together a number of key biopolymer and biodegradable plastics topics in one place for a broad audience of engineers and scientists, especially those designing with biopolymers and biodegradable plastics, or evaluating the options for switching from traditional plastics to biopolymers. Topics covered include preparation, fabrication, applications and recycling (including biodegradability and compostability). Applications in key areas such as films, coatings controlled release and tissue engineering are discussed. Dr Ebnesajjad provides readers with an in-depth reference for the plastics industry – material suppliers and processors, bio-polymer producers, bio-polymer processors and fabricators – and for industry sectors utilizing biopolymers – automotive, packaging, construction, wind turbine manufacturers, film manufacturers, adhesive and coating industries, medical device manufacturers, biomedical engineers, and the recycling industry. Essential information and practical guidance for engineers and scientists working with bioplastics, or evaluating a migration to bioplastics. Includes key published material on biopolymers, updated specifically for this Handbook, and new material including coverage of PLA and Tissue Engineering Scaffolds. Coverage of materials and applications together in one handbook enables engineers and scientists to make informed design decisions.
Download or read book Handbook of Polymer Synthesis Characterization and Processing written by Enrique Saldivar-Guerra and published by John Wiley & Sons. This book was released on 2013-02-28 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a broad range of polymer science topics, Handbook of Polymer Synthesis, Characterization, and Processing provides polymer industry professionals and researchers in polymer science and technology with a single, comprehensive handbook summarizing all aspects involved in the polymer production chain. The handbook focuses on industrially important polymers, analytical techniques, and formulation methods, with chapters covering step-growth, radical, and co-polymerization, crosslinking and grafting, reaction engineering, advanced technology applications, including conjugated, dendritic, and nanomaterial polymers and emulsions, and characterization methods, including spectroscopy, light scattering, and microscopy.
Download or read book Handbook of Engineering Biopolymers written by Stoyko Fakirov and published by Hanser Gardner Publications. This book was released on 2007 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the results of numerous worldwide studies focusing on the implementation of natural polymers as engineering plastics and the use of their inherent properties. It discusses the processing and, more extensively, the applicati on of natural materials (cellulose and protein-based) as reinforcements for polymer composites. The structural, morphological, and thermal characteristics, as well as the mechanical behavior of the obtained materials are covered comprehensively. In addition, the book includes case studies and results of commercial relevance. All natural polymers used in the blending or reinforcement of synthetic polymers are discussed in an attempt to cover the isolation, pretreatment, blending, and manufacturing of the respective materials.
Download or read book Handbook of Industrial Water Soluble Polymers written by Peter A. Williams and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural and synthetic water soluble polymers are used in a wide range of familiar industrial and consumer products, including coatings and inks, papers, adhesives, cosmetics and personal care products. They perform a variety of functions without which these products would be significantly more expensive, less effective or both. Written for research, development and formulation chemists, technologists and engineers at graduate level and beyond in the fine and specialty chemicals, polymers, food and pharmaceutical industries, the Handbook of Industrial Water Soluble Polymers deals specifically with the functional properties of both natural and synthetic water soluble polymers. By taking a function based approach, rather than a “polymer specific” approach the book illustrates how polymer structure leads to effect, and shows how different polymer types can be employed to achieve appropriate product properties.
Download or read book Handbook of Polymers for Pharmaceutical Technologies Biodegradable Polymers written by Vijay Kumar Thakur and published by John Wiley & Sons. This book was released on 2015-09-22 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are one of the most fascinating materials of the present era finding their applications in almost every aspects of life. Polymers are either directly available in nature or are chemically synthesized and used depending upon the targeted applications.Advances in polymer science and the introduction of new polymers have resulted in the significant development of polymers with unique properties. Different kinds of polymers have been and will be one of the key in several applications in many of the advanced pharmaceutical research being carried out over the globe. This 4-partset of books contains precisely referenced chapters, emphasizing different kinds of polymers with basic fundamentals and practicality for application in diverse pharmaceutical technologies. The volumes aim at explaining basics of polymers based materials from different resources and their chemistry along with practical applications which present a future direction in the pharmaceutical industry. Each volume offer deep insight into the subject being treated. Volume 1: Structure and Chemistry Volume 2: Processing and Applications Volume 3: Biodegradable Polymers Volume 4: Bioactive and Compatible Synthetic/Hybrid Polymers
Download or read book Handbook of Polymers for Pharmaceutical Technologies Structure and Chemistry written by Vijay Kumar Thakur and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are one of the most fascinating materials of the present era finding their applications in almost every aspects of life. Polymers are either directly available in nature or are chemically synthesized and used depending upon the targeted applications.Advances in polymer science and the introduction of new polymers have resulted in the significant development of polymers with unique properties. Different kinds of polymers have been and will be one of the key in several applications in many of the advanced pharmaceutical research being carried out over the globe. This 4-partset of books contains precisely referenced chapters, emphasizing different kinds of polymers with basic fundamentals and practicality for application in diverse pharmaceutical technologies. The volumes aim at explaining basics of polymers based materials from different resources and their chemistry along with practical applications which present a future direction in the pharmaceutical industry. Each volume offer deep insight into the subject being treated. Volume 1: Structure and Chemistry Volume 2: Processing and Applications Volume 3: Biodegradable Polymers Volume 4: Bioactive and Compatible Synthetic/Hybrid Polymers
Download or read book Handbook of Polymers written by George Wypych and published by Elsevier. This book was released on 2022-03-19 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Polymers, Third Edition represents an update on available data, including new values for many commercially available products, verification of existing data, and removal of older data where it is no longer useful. Polymers selected for this edition include all primary polymeric materials used by the plastics and chemical industries and specialty polymers used in the electronics, pharmaceutical, medical and aerospace fields, with extensive information also provided on biopolymers. The book includes data on all polymeric materials used by the plastics industry and branches of the chemical industry, as well as specialty polymers in the electronics, pharmaceutical, medical and space fields. The entire scope of the data is divided into sections to make data comparison and search easy, including synthesis, physical, mechanical, and rheological properties, chemical resistance, toxicity, environmental impact, and more. Provides key data on all primary polymeric materials used in a wide range of industries and applications Presents easy-to-access data divided into sections, making comparisons and search simple and intuitive Includes data on general properties, history, synthesis, structure, physical properties, mechanical properties, chemical resistance, flammability, weather stability, toxicity, and more
Download or read book Polymer Handbook written by J. Brandrup and published by Wiley-Interscience. This book was released on 1999-03-08 with total page 2336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This one-stop reference, now almost 2,000 pages, brings together all the data needed in theoretical and experimental polymer research. It is designed so the scientist doesn't have to search through multitudes of literature for information on polymers. Features: * Continues to be the only source for fundamental, validated property data of polymeric material * Explores the developments in the field since 1989, such as new pvt relationships and new co-polymer reactivity parameters * Includes 30% new data - which is more reliable and accurate due to advances in instruments * Improved nomenclature to aid indexing and search & retrieval
Download or read book Natural Polymers written by Saiqa Ikram and published by Nova Science Publishers. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compiled contribution from experts in the field of natural polymers, and it is organised into two volumes. The purpose of this book is to provide an entire catalogue of natural polymers, beginning with their introduction, mass production, qualitative and quantitative characterisation and leading to their advanced applications in every aspect of life (i.e. from food packaging to biomedical studies such as cancer treatments). Overall, it compiles all abundant natural polymers originating from both plant and animal resources such as cellulose, carrageenan, xanthum gum, chitin, chitosan, etc. The derivatives of these natural polymers in the form of hydrogels, blends and composites are also compiled with their recent societal benefits and applications.
Download or read book Handbook of Composites from Renewable Materials Design and Manufacturing written by Vijay Kumar Thakur and published by John Wiley & Sons. This book was released on 2017-03-03 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique multidisciplinary 8-volume set focuses on the emerging issues concerning synthesis, characterization, design, manufacturing and various other aspects of composite materials from renewable materials and provides a shared platform for both researcher and industry. The Handbook of Composites from Renewable Materials comprises a set of 8 individual volumes that brings an interdisciplinary perspective to accomplish a more detailed understanding of the interplay between the synthesis, structure, characterization, processing, applications and performance of these advanced materials. The Handbook comprises 169 chapters from world renowned experts covering a multitude of natural polymers/ reinforcement/ fillers and biodegradable materials. Volume 2 is solely focused on the Design and Manufacturing of renewable materials. Some of the important topics include but not limited to: Design and manufacturing of high performance green composites; manufacturing of high performance biomass-based polyesters by rheological approach; components design of fibrous composite materials; design and manufacturing of bio-based sandwich structures; design and manufacture of biodegradable products from renewable resources; manufacturing and characterization of quicklime filled metal alloy composites for single row deep groove ball bearing; manufacturing of composites from chicken feathers and poly (vinyl chloride); production of porous carbons from resorcinol-formaldehyde gels: applications; composites using agricultural wastes; manufacturing of rice wastes-based natural fiber polymer composites from thermosetting vs. thermoplastic matrices; thermoplastic polymeric composites; natural fiber reinforced PLA composites; rigid closed-cell PUR foams containing polyols derived from renewable resources; preparation and application of the composite from alginate; recent developments in biocomposites of bombyx mori silk fibroin; design and manufacturing of natural fiber/ synthetic fiber reinforced polymer hybrid composites; natural fiber composite strengthening solution for structural beam component for enhanced flexural strength; high pressure resin transfer molding of epoxy resins from renewable sources; cork based structural composites; the use of wheat straw as an agricultural waste in composites for semi-structural applications and design/ manufacturing of sustainable composites.
Download or read book Natural Polymers written by Maya J. John and published by Green Chemistry. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set provides a valuable reference on natural polymer composites, including both natural and protein fibers, and natural polymer nanocomposites.
