Download or read book Handbook of Mathematical Relations in Particulate Materials Processing written by Randall M. German and published by John Wiley & Sons. This book was released on 2009-01-06 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only handbook of mathematical relations with a focus on particulate materials processing The National Science Foundation estimates that over 35% of materials-related funding is now directed toward modeling. In part, this reflects the increased knowledge and the high cost of experimental work. However, currently there is no organized reference book to help the particulate materials community with sorting out various relations. This book fills that important need, providing readers with a quick-reference handbook for easy consultation. This one-of-a-kind handbook gives readers the relevant mathematical relations needed to model behavior, generate computer simulations, analyze experiment data, and quantify physical and chemical phenomena commonly found in particulate materials processing. It goes beyond the traditional barriers of only one material class by covering the major areas in ceramics, cemented carbides, powder metallurgy, and particulate materials. In many cases, the governing equations are the same but the terms are material-specific. To rise above these differences, the authors have assembled the basic mathematics around the following topical structure: Powder technology relations, such as those encountered in atomization, milling, powder production, powder characterization, mixing, particle packing, and powder testing Powder processing, such as uniaxial compaction, injection molding, slurry and paste shaping techniques, polymer pyrolysis, sintering, hot isostatic pressing, and forging, with accompanying relations associated with microstructure development and microstructure coarsening Finishing operations, such as surface treatments, heat treatments, microstructure analysis, material testing, data analysis, and structure-property relations Handbook of Mathematical Relations in Particulate Materials Processing is suited for quick reference with stand-alone definitions, making it the perfect complement to existing resources used by academic researchers, corporate product and process developers, and various scientists, engineers, and technicians working in materials processing.
Download or read book Particulate Composites written by Randall M. German and published by Springer. This book was released on 2016-06-14 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on composites involving powders as the starting materials. It provides relevant information for questions related to the selection of constituent phases, most economic fabrication routes, proper testing procedures, and product optimization. The field is sufficiently advanced that predictive models guide many decisions. Applications are illustrated over a broad range of material and property combinations. This title includes: •Selection of phases with consideration of intersolubility & interface •Microstructure, especially the role of phase connectivity •Fabrication approaches, especially net-shape consolidation •Assessment of typical properties, testing techniques & industry standards •Design & trade-off decisions involved in optimization, including cost •Applications, both those that have matured and some emerging prospects. The reader may have little appreciation for how particulate composites are literally everywhere. Examples include new wear resistant consumer products(Apple watch), longer lasting automotive tires with reduced rolling resistance(Yokohama tires), and new diamond heat sinks for computers(Element Six substrates). Particulate composites also form critical components in applications such as magnets, dental fillings, brakes, darts, bio-implants, & cutting tools. Particulate composites are a multi-billion dollar industry, and can be a cost-effective solution ripe for innovation and continued rapid growth. For the engineer, the wide range of particulate composite formulation and property combinations offers the ability to design for a variety of application and provides ample opportunity for innovation. Particulate Composites: Fundamentals & Applications is ideal for use in a one-semester eng. course at the senior UG/graduate level, and is also suitable as a practical reference for materials scientists in academia and industry.
Download or read book Particulate Products written by Henk G. Merkus and published by Springer Science & Business Media. This book was released on 2013-11-19 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particulate products make up around 80% of chemical products, from all industry sectors. Examples given in this book include the construction materials, fine ceramics and concrete; the delicacies, chocolate and ice cream; pharmaceutical, powders, medical inhalers and sun screen; liquid and powder paints. Size distribution and the shape of the particles provide for different functionalities in these products. Some functions are general, others specific. General functions are powder flow and require – at the typical particulate concentrations of these products – that the particles cause adequate rheological behavior during processing and/or for product performance. Therefore, this book addresses particle packing as well as its relation to powder flow and rheological behavior. Moreover, general relationships to particle size are discussed for e.g. color and sensorial aspects of particulate products. Product-specific functionalities are often relevant for comparable product groups. Particle size distribution and shape provide, for example, the following functionalities: - dense particle packing in relation to sufficient strength is required in concrete construction, ceramic objects and pharmaceutical tablets - good sensorial properties (mouthfeel) to chocolate and ice cream - effective dissolution, flow and compression properties for pharmaceutical powders - adequate hiding power and effective coloring of paints for protection and the desired esthetical appeal of the objects - adequate protection of our body against sun light by sunscreen - effective particle transport and deposition to desired locations for medical inhalers and powder paints. Adequate particle size distribution, shape and porosity of particulate products have to be achieved in order to reach optimum product performance. This requires adequate management of design and development as well as sufficient knowledge of the underlying principles of physics and chemistry. Moreover, flammability, explosivity and other health hazards from powders, during handling, are taken into account. This is necessary, since great risks may be involved. In all aspects, the most relevant parameters of the size distribution (and particle shape) have to be selected. In this book, experts in the different product fields have contributed to the product chapters. This provides optimum information on what particulate aspects are most relevant for behavior and performance within specified industrial products and how optimum results can be obtained. It differs from other books in the way that the critical aspects of different products are reported, so that similarities and differences can be identified. We trust that this approach will lead to improved optimization in design, development and quality of many particulate products.
Download or read book Mitigating Tin Whisker Risks written by Takahiko Kato and published by John Wiley & Sons. This book was released on 2016-04-28 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the growth mechanisms of tin whiskers and the effective mitigation strategies necessary to reduce whisker growth risks This book covers key tin whisker topics, ranging from fundamental science to practical mitigation strategies. The text begins with a review of the characteristic properties of local microstructures around whisker and hillock grains to identify why these particular grains and locations become predisposed to forming whiskers and hillocks. The book discusses the basic properties of tin-based alloy finishes and the effects of various alloying elements on whisker formation, with a focus on potential mechanisms for whisker suppression or enhancement for each element. Tin whisker risk mitigation strategies for each tier of the supply chain for high reliability electronic systems are also described. Discusses whisker formation factors including surface grain geometry, crystallographic orientation-dependent surface grain boundary structure, and the localization of elastic strain/strain energy density distribution Examines how whiskers and hillocks evolve in time through real-time studies of whisker growth with the scanning electron microscope/focused ion beaming milling (SEM/FIB) Covers characterization methods of tin and tin-based alloy finishes such as transmission electron microscopy (TEM), scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD) Reviews theories of mechanically-induced tin whiskers with case studies using pure tin and other lead-free finishes shown to evaluate the pressure-induced tin whiskers Mitigating Tin Whisker Risks: Theory and Practice is intended for the broader electronic packaging and manufacturing community including: manufacturing engineers, packaging development engineers, as well as engineers and researchers in high reliability industries.
Download or read book Chemistry and Physics of Mechanical Hardness written by John J. Gilman and published by John Wiley & Sons. This book was released on 2009-05-27 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of the chemistry and physics of mechanical hardness Chemistry and Physics of Mechanical Hardness presents a general introduction to hardness measurement and the connections between hardness and fundamental materials properties. Beginning with an introduction on the importance of hardness in the development of technology, the book systematically covers: Indentation Chemical bonding Plastic deformation Covalent semiconductors Simple metals and alloys Transition metals Intermetallic compounds Ionic crystals Metal-metalloids Oxides Molecular crystals Polymers Glasses Hot hardness Chemical hardness Super-hard materials Chemistry and Physics of Mechanical Hardness is essential reading for materials scientists, mechanical engineers, metallurgists, ceramists, chemists, and physicists who are interested in learning how hardness is related to other properties and to the building blocks of everyday matter.
Download or read book Metal Oxide Powder Technologies written by Yarub Al-Douri and published by Elsevier. This book was released on 2020-06-02 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Powder Technologies: Fundamentals, Processing Methods and Applications reviews the fundamentals, processing methods and applications of this key materials system. Topics addressed comprehensively cover chemical and physical properties, synthesis, preparation, both accepted and novel processing methods, modeling and simulation. The book provides fundamental information on the key properties that impact performance, such as particle size and crystal structure, along with methods to measure, analyze and evaluate. Finally, important applications are covered, including biomedical, energy, electronics and materials applications. Provides a comprehensive overview of key topics both on the theoretical side and the experimental Discusses important properties that impact metal oxide performance, processing methods (both novel and accepted), and important applications Reviews the most relevant applications, such as biomedical, energy, electronics and materials applications
Download or read book Advances in Sintering Science and Technology written by E. A. Olevsky and published by John Wiley & Sons. This book was released on 2010-02-04 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of the Ceramic Transactions compiles 41 papers covering a rich diversity of the sintering science and technology topics. These papers were presented at the International Conference on Sintering, November 16-20, 2008 in La Jolla, California. The Ceramic Transactions series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Reactive transport modeling of fluid rock interactions associated with carbonate diagenesis and implications for reservoir quality prediction written by Ying Xiong and published by Cuvillier Verlag. This book was released on 2022-07-26 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diagenesis research is the foundation of hydrocarbon reservoir characterization and exploration. Reactive transport modeling (RTM) is an emerging approach for diagenesis research, with unique capability of quantification and forward modeling of the coupled thermo-hydro-chemical processes of diagenesis. Using TOUGHREACT simulator, this thesis investigates the two most important fluid-rock interactions in carbonate rocks, i.e., dolomitization and karstification, based on generic model analyses and a case study in the Ordos Basin, China. In particular, this study attempts to quantitatively characterize the diagenetic processes and to reconstruct the diagenesis-porosity evolution of carbonate reservoirs. Some controversies in carbonate diagenesis research, which cannot be well explained by classical geological methods, have also been discussed. The results are helpful to better understand the spatial-temporal distribution and co-evolution of diagenesis-mineral-porosity during the complicated diagenetic processes with their potential controlling factors, and to reduce the uncertainty of reservoir quality prediction.
Download or read book Alloy Design and Process Innovations written by Prashanth Konda Gokuldoss and published by MDPI. This book was released on 2020-04-15 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is one of the manufacturing processes that warrants the attention of industrialists, researchers and scientists, because of its ability to produce materials with a complex shape without theoretical restrictions and with added functionalities. There are several advantages to employing additive manufacturing as the primary additive manufacturing process. However, there exist several challenges that need to be addressed systematically. A couple such issues are alloy design and process development. Traditionally alloys designed for conventional cast/powder metallurgical processes were fabricated using advanced AM processes. This is the wrong approach considering that the alloys should be coined based on the process characteristics and meta-stable nature of the process. Hence, we must focus on alloy design and development for AM that suits the AM processes. The AM processes, however, improve almost every day, either in terms of processing capabilities or processing conditions. Hence, the processing part warrants a section that is devoted to these advancements and innovations. Accordingly, the present Special Issue (book) focuses on two aspects of alloy development and process innovations. Here, 45 articles are presented covering different AM processes including selective laser melting, electron beam melting, laser cladding, direct metal laser sintering, ultrasonic consolidation, wire arc additive manufacturing, and hybrid manufacturing. I believe that this Special Issue bears is vital to the field of AM and will be a valuable addition.
Download or read book Book Review Index 2009 Cumulation written by Dana Ferguson and published by Book Review Index Cumulation. This book was released on 2009-08 with total page 1304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Book Review Index provides quick access to reviews of books, periodicals, books on tape and electronic media representing a wide range of popular, academic and professional interests. The up-to-date coverage, wide scope and inclusion of citations for both newly published and older materials make Book Review Index an exceptionally useful reference tool. More than 600 publications are indexed, including journals and national general interest publications and newspapers. Book Review Index is available in a three-issue subscription covering the current year or as an annual cumulation covering the past year.
Download or read book International Handbook of Universities written by and published by . This book was released on 2010 with total page 1792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Mathematical Geosciences written by B.S. Daya Sagar and published by Springer. This book was released on 2018-06-25 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access handbook published at the IAMG's 50th anniversary, presents a compilation of invited path-breaking research contributions by award-winning geoscientists who have been instrumental in shaping the IAMG. It contains 45 chapters that are categorized broadly into five parts (i) theory, (ii) general applications, (iii) exploration and resource estimation, (iv) reviews, and (v) reminiscences covering related topics like mathematical geosciences, mathematical morphology, geostatistics, fractals and multifractals, spatial statistics, multipoint geostatistics, compositional data analysis, informatics, geocomputation, numerical methods, and chaos theory in the geosciences.
Download or read book Modeling in Materials Processing written by Jonathan A. Dantzig and published by Cambridge University Press. This book was released on 2001-11-12 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modeling and computer simulation are useful tools for improving materials processing. While courses in materials processing have covered modeling, they have been devoted to one particular class of materials--polymers, metals, or ceramics. This text offers a new approach, presenting an integrated treatment of metallic and non-metallic materials. The authors show that a common base of knowledge--specifically, the fundamentals of heat transfer and fluid mechanics--unifies these seemingly disparate areas. They emphasize understanding basic physical phenomena and knowing how to include them in a model. The book also includes selected numerical methods, a wealth of practical, realistic examples, and homework exercises.
Download or read book Sintering Theory and Practice written by Randall M. German and published by Wiley-Interscience. This book was released on 1996-01-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although sintering is an essential process in the manufacture ofceramics and certain metals, as well as several other industrialoperations, until now, no single book has treated both thebackground theory and the practical application of this complex andoften delicate procedure. In Sintering Theory and Practice, leadingresearcher and materials engineer Randall M. German presents acomprehensive treatment of this subject that will be of great useto manufacturers and scientists alike. This practical guide to sintering considers the fact that while thebonding process improves strength and other engineering propertiesof the compacted material, inappropriate methods of control maylead to cracking, distortion, and other defects. It provides aworking knowledge of sintering, and shows how to avoid problemswhile accounting for variables such as particle size, maximumtemperature, time at that temperature, and other problems that maycause changes in processing. The book describes the fundamental atomic events that govern thetransformation from particles to solid, covers all forms of thesintering process, and provides a summary of many actual productioncycles. Building from the ground up, it begins with definitions andprogresses to measurement techniques, easing the transition,especially for students, into advanced topics such as single-phasesolid-state sintering, microstructure changes, the complications ofmixed particles, and pressure-assisted sintering. German draws onsome six thousand references to provide a coherent and lucidtreatment of the subject, making scientific principles andpractical applications accessible to both students andprofessionals. In the process, he also points out and avoids thepitfalls found in various competing theories, concepts, andmathematical disputes within the field. A unique opportunity to discover what sintering is all about--bothin theory and in practice What is sintering? We see the end product of this thermal processall around us--in manufactured objects from metals, ceramics,polymers, and many compounds. From a vast professional literature,Sintering Theory and Practice emerges as the only comprehensive,systematic, and self-contained volume on the subject. Covering all aspects of sintering as a processing topic, includingmaterials, processes, theories, and the overall state of the art,the book * Offers numerous examples, illustrations, and tables that detailactual processing cycles, and that stress existing knowledge in thefield * Uses the specifics of various consolidation cycles to illustratethe basics * Leads the reader from the fundamentals to advanced topics,without getting bogged down in various mathematical disputes overtreatments and measurements * Supports the discussion with critically selected references fromthousands of sources * Examines the sintering behavior of a wide variety of engineeredmaterials--metals, alloys, oxide ceramics, composites, carbides,intermetallics, glasses, and polymers * Guides the reader through the sintering processes for severalimportant industrial materials and demonstrates how to controlthese processes effectively and improve present techniques * Provides a helpful reference for specific information onmaterials, processing problems, and concepts For practitioners and researchers in ceramics, powder metallurgy,and other areas, and for students and faculty in materials scienceand engineering, this book provides the know-how and understandingcrucial to many industrial operations, offers many ideas forfurther research, and suggests future applications of thisimportant technology. This book offers an unprecedented opportunity to explore sinteringin both practical and theoretical terms, whether at the lab or inreal-world applications, and to acquire a broad, yet thorough,understanding of this important technology.
Download or read book Unit Operations of Particulate Solids written by Enrique Ortega-Rivas and published by CRC Press. This book was released on 2016-04-19 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Suitable for practicing engineers and engineers in training, this book covers the most important operations involving particulate solids. Through clear explanations of theoretical principles and practical laboratory exercises, the text provides an understanding of the behavior of powders and pulverized systems. It also helps readers develop skills for operating, optimizing, and innovating particle processing technologies and machinery in order to carry out industrial operations. The author explores common bulk solids processing operations, including milling, agglomeration, fluidization, mixing, and solid-fluid separation.
Download or read book Australian Government Publications written by and published by . This book was released on 1986 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: