Download or read book Guidelines for Testing Large Seismic Isolator and Energy Dissipation Devices written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2002-01-01 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Innovation Center. This report outlines the HITEC Technical Evaluation Plan for large seismic isolator and energy dissipation devices. The plan is designed to characterize the fundamental properties and performance characteritics of a wide range of devices produced by U.S. and overseas manufacturers. It describes a program of full-scale dynamic tests, the results of which should provide guidance to the transportation-engineering community regarding the performance of large seismic devices.
Download or read book Guide Specifications for Seismic Isolation Design written by and published by AASHTO. This book was released on 2010 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is based on the work of NCHRP project 20-7, task 262 and updates the 2nd (1999) edition -- P. ix.
Download or read book Summary of Evaluation Findings for the Testing of Seismic Isolation and Energy Dissipating Devices written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 1999-01-01 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. his report summarizes the results of an evaluation that was designed to test the performance of 11 seismic isolators and dampers. The devices were tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Download or read book Environmental Technology Verification Report for the Plasma Enhanced Melter written by and published by ASCE Publications. This book was released on 2003-01-01 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Environmental Technology Evaluation Center (EvTEC), a service center of CERF/IIEC. This Technology Verification report describes the nature and scope of the environmental evaluation of the performance of the Plasma Enhanced Melter? (PEM?) system for waste treatment. The evaluation was conducted through a cooperative program established in 1998 between the Washington State Department of Ecology, Integrated Environmental Technology Inc., Allied Technology Group, and the Civil Engineering Research Foundation. The goal of this report is to provide potential users and purchasers of the PEM? system with information they need to make more informed decisions regarding the performance of PEM? as an equivalent or alternative to incineration for treating hazardous waste.
Download or read book Guidelines for the Testing of Seismic Isolation and Energy Dissipating Devices written by Civil Engineering Research Foundation and published by . This book was released on 1996 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers from the June 1995 symposium describe recent discoveries in the genetics, biochemistry, biology, pharmacology, and clinical aspects of neuropeptide research. After a history of the field, coverage includes the use of transgenic and knockout mice in neuropeptide research; CRF- receptor subtypes; individual differences in responses to the behavioral actions of peptides; new peptide-processing enzymes; neuropeptidase gene regulation; interactions and coexistance of neuropeptides and serotonin in spinal autonomic systems; and peptide modulators of serotonin pathways. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Evaluation of the Tricon Retained Soil Wall System written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2002-01-01 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center, a CERF/IIEC Innovation Center. This report describes a HITEC evaluation designed to determine the basic capabilities and limitations of the Tricon System for use as a technically viable, precast, mechanically stabilized earth-retaining wall system. The evaluation considered material, design, construction, performance, and quality assurance information outlined in the HITEC Protocol.
Download or read book Evaluation Findings for Oiles Multiple Viscous Shear Damper written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 1999-01-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailedØevaluation of Multiple Viscous Shear Damper (MS Damper),Ømanufactured by Oiles. The report is part of a program to test the performance of 11 seismic isolators and dampers produced by several manufacturers. The devicesØwere tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Download or read book Evaluation of the Geo Con VERT Wall System written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2002-01-01 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF/IIEC Innovation Center This report describes a HITEC evaluation designed to determine the basic capabilites and limitations of the Geo-Con VERT Wall for use as a technically viable permanent excavation support retaining wall system. The evaluation was conducted based on design, construction, performance, and quality assurance information outlined in the HITEC Protocol. The Geo-Con VERT Wall System is an in-situ retaining wall system intended as an alternative to other types of cut walls such as soldier pile and anchored retaining walls. Geo-Con VERT Wall System is comprised of: deep soil mix columns consisting of overlapping or tangent soil-cement columns along the front face backed up by tangent rows of overlapping soil-cement columns; a soil-cement relieving platform overtop the columns; steel beams embedded in the front face soil-cement columns for support of the permanent facing; and permanent facing consisting of precast, reinforced concrete panels or reinforced cast-in-place concrete. The relieving platform is intended to provide internal stability by typing the soil-mix columns together and transferring the load to the bottom of the columns.
Download or read book Evaluation Findings for Tekton Inc Steel Rubber Bearings written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 1998-01-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailedØevaluation of steel rubber bearings,Ømanufactured by Tekton, Inc. The report is part of a program to test the performance of 11 seismic isolators and dampers produced by several manufacturers. The devicesØwere tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Download or read book Evaluation Findings for Seismic Energy Products L P Elastomeric Isolation Bearing written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2001-01-01 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report presents the results of a detailed evaluation for one seismic isolator supplied by Seismic Energy Products, L.P. The evaluation is designed to test the performance of seismic isolators and dampers.
Download or read book Evaluation Findings for Skellerup Base Isolation Elastomeric Bearings written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 1998-01-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailedØevaluation of base isolation elastomeric bearings,Ømanufactured by Skellerup. The report is part of a program to test the performance of 11 seismic isolators and dampers produced by several manufacturers. The devicesØwere tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Download or read book Recent Advances and Applications of Seismic Isolation and Energy Dissipation Devices written by Dario De Domenico and published by Frontiers Media SA. This book was released on 2020-10-12 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eBook is a collection of articles from a Frontiers Research Topic. Frontiers Research Topics are very popular trademarks of the Frontiers Journals Series: they are collections of at least ten articles, all centered on a particular subject. With their unique mix of varied contributions from Original Research to Review Articles, Frontiers Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author by contacting the Frontiers Editorial Office: frontiersin.org/about/contact.
Download or read book Bridge Engineering Handbook Five Volume Set written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 3042 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection provides detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject, and also highlights bridges from around the world. This second edition of the bestselling Bridge Engineering Handbook covers virtually all the information an engineer would need to know about any type of bridge-from planning to construction to maintenance. It contains more than 2,500 tables, charts, and illustrations in a practical, ready-to-use format. An abundance of worked-out examples gives readers numerous practical step-by-step design procedures. Special attention is given to rehabilitation, retrofit, and maintenance. Coverage also includes seismic design and building materials. Thoroughly revised and updated, this second edition contains 26 new chapters.
Download or read book Evaluation Findings for Tekton Inc Roller Bearings written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 1998-01-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailedØevaluation of roller bearings,Ømanufactured by Tekton, Inc. The report is part of a program to test the performance of 11 seismic isolators and dampers produced by several manufacturers. The devicesØwere tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Download or read book Seismic Design and Retrofit of Bridges written by M. J. N. Priestley and published by John Wiley & Sons. This book was released on 1996-04-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their structural simplicity, bridges tend to beparticularly vulnerable to damage and even collapse when subjectedto earthquakes or other forms of seismic activity. Recentearthquakes, such as the ones in Kobe, Japan, and Oakland,California, have led to a heightened awareness of seismic risk andhave revolutionized bridge design and retrofit philosophies. In Seismic Design and Retrofit of Bridges, three of the world's topauthorities on the subject have collaborated to produce the mostexhaustive reference on seismic bridge design currently available.Following a detailed examination of the seismic effects of actualearthquakes on local area bridges, the authors demonstrate designstrategies that will make these and similar structures optimallyresistant to the damaging effects of future seismicdisturbances. Relying heavily on worldwide research associated with recentquakes, Seismic Design and Retrofit of Bridges begins with anin-depth treatment of seismic design philosophy as it applies tobridges. The authors then describe the various geotechnicalconsiderations specific to bridge design, such as soil-structureinteraction and traveling wave effects. Subsequent chapters coverconceptual and actual design of various bridge superstructures, andmodeling and analysis of these structures. As the basis for their design strategies, the authors' focus is onthe widely accepted capacity design approach, in which particularlyvulnerable locations of potentially inelastic flexural deformationare identified and strengthened to accommodate a greater degree ofstress. The text illustrates how accurate application of thecapacity design philosophy to the design of new bridges results instructures that can be expected to survive most earthquakes withonly minor, repairable damage. Because the majority of today's bridges were built before thecapacity design approach was understood, the authors also devoteseveral chapters to the seismic assessment of existing bridges,with the aim of designing and implementing retrofit measures toprotect them against the damaging effects of future earthquakes.These retrofitting techniques, though not considered appropriate inthe design of new bridges, are given considerable emphasis, sincethey currently offer the best solution for the preservation ofthese vital and often historically valued thoroughfares. Practical and applications-oriented, Seismic Design and Retrofit ofBridges is enhanced with over 300 photos and line drawings toillustrate key concepts and detailed design procedures. As the onlytext currently available on the vital topic of seismic bridgedesign, it provides an indispensable reference for civil,structural, and geotechnical engineers, as well as students inrelated engineering courses. A state-of-the-art text on earthquake-proof design and retrofit ofbridges Seismic Design and Retrofit of Bridges fills the urgent need for acomprehensive and up-to-date text on seismic-ally resistant bridgedesign. The authors, all recognized leaders in the field,systematically cover all aspects of bridge design related toseismic resistance for both new and existing bridges. * A complete overview of current design philosophy for bridges,with related seismic and geotechnical considerations * Coverage of conceptual design constraints and their relationshipto current design alternatives * Modeling and analysis of bridge structures * An exhaustive look at common building materials and theirresponse to seismic activity * A hands-on approach to the capacity design process * Use of isolation and dissipation devices in bridge design * Important coverage of seismic assessment and retrofit design ofexisting bridges
Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subjec
Download or read book Proceedings of the Third National Seismic Conference and Workshop on Bridges and Highways written by Roland Nimis and published by . This book was released on 2002 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:
