Download or read book ASCE Standard ASCE SEI 41 17 Seismic Evaluation and Retrofit of Existing Buildings written by American Society of Civil Engineers and published by . This book was released on 2017 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard ASCE/SEI 41-17 describes deficiency-based and systematic procedures that use performance-based principles to evaluate and retrofit existing buildings to withstand the effects of earthquakes.
Download or read book Guidelines for Seismic Evaluation and Design of Petrochemical Facilities written by American Society of Civil Engineers. Task Committee on Seismic Evaluation and Design of Petrochemical Facilities and published by American Society of Civil Engineers. This book was released on 1997 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics include design and evaluation philosophy, seismic hazards such as ground shaking, fault rupture, and tsunamis, analysis and load definition, primary structural design criteria and considerations, walkdown evaluations of existing facilities, design and evaluation of tanks at grade, and retrofit design and procedures for seismically deficit structures.
Download or read book Guidelines for Seismic Evaluation of Existing Buildings written by Allen, D. E. (David E.) and published by Institute for Research in Construction. This book was released on 1993 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook for the Seismic Evaluation of Existing Buildings written by Building Seismic Safety Council (U.S.) and published by DIANE Publishing. This book was released on 1992 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides engineers involved with the seismic evaluation of existing buildings with guidance concerning the potential earthquake related risk to human life posed by a building or building component.
Download or read book Seismic Evaluation of Existing Buildings written by and published by DIANE Publishing. This book was released on 1993-07 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides design professionals & local building officials with a standard methodology to evaluate buildings of different types & occupancies in areas of different seismicity throughout the U.S.
Download or read book Seismic Evaluation and Rehabilitation of Structures written by Alper Ilki and published by Springer. This book was released on 2016-08-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past, facilities considered to be at the end of their useful life were demolished and replaced with new ones that better met the functional requirements of modern society, including new safety standards. Humankind has recently recognised the threats to the environment and to our limited natural resources due to our relentless determination to destroy the old and build anew. With the awareness of these constraints and the emphasis on sustainability, in future the majority of old structures will be retrofitted to extend their service life as long as feasible. In keeping with this new approach, the EU’s Construction Products Regulation 305/2011, which is the basis of the Eurocodes, included the sustainable use of resources as an "Essential Requirement" for construction. So, the forthcoming second generation of EN-Eurocodes will cover not only the design of new structures, but the rehabilitation of existing ones as well. Most of the existing building stock and civil infrastructures are seismically deficient. When the time comes for a decision to prolong their service life with the help of structural and architectural upgrading, seismic retrofitting may be needed. Further, it is often decided to enhance the earthquake resistance of facilities that still meet their functional requirements and fulfil their purpose, if they are not earthquake-safe. In order to decide how badly a structure needs seismic upgrading or to prioritise it in a population of structures, a seismic evaluation is needed, which also serves as a guide for the extent and type of strengthening. Seismic codes do not sufficiently cover the delicate phase of seismic evaluation nor the many potential technical options for seismic upgrading; therefore research is on-going and the state-of-the-art is constantly evolving. All the more so as seismic evaluation and rehabilitation demand considerable expertise, to make best use of the available safety margins in the existing structure, to adapt the engineering capabilities and techniques at hand to the particularities of a project, to minimise disruption of use, etc. Further, as old structures are very diverse in terms of their materials and layout, seismic retrofitting does not lend itself to straightforward codified procedures or cook-book approaches. As such, seismic evaluation and rehabilitation need the best that the current state-of-the-art can offer on all aspects of earthquake engineering. This volume serves this need, as it gathers the most recent research of top seismic experts from around the world on seismic evaluation, retrofitting and closely related subjects.
Download or read book Rapid Visual Screening of Buildings for Potential Seismic Hazards Supporting Documentation written by and published by Government Printing Office. This book was released on 2015 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Rapid Visual Screening (RVS) handbook can be used by trained personnel to identify, inventory, and screen buildings that are potentially seismically vulnerable. The RVS procedure comprises a method and several forms that help users to quickly identify, inventory, and score buildings according to their risk of collapse if hit by major earthquakes. The RVS handbook describes how to identify the structural type and key weakness characteristics, how to complete the screening forms, and how to manage a successful RVS program.
Download or read book Seismic Evaluation and Design of Petrochemical and Other Industrial Facilities written by American Society of Civil Engineers. Task Committee on Seismic Evaluation and Design of Petrochemical Facilities and published by . This book was released on 2020 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This report offers practical recommendations regarding the design and safety of new and existing petrochemical facilities during and following an earthquake"--
Download or read book Guidelines for Seismic Retrofit of Existing Buildings written by and published by . This book was released on 2001 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: This renamed version of the former Uniform code for building conservation guidelines for retrofitting unreinforced masonry bearing wall buildings, reinforced concrete and reinforced masonry buildings, wood frame residential buildings, and concrete with masonry infill buildings.
Download or read book Review Application and Critique of the Guidelines for Seismic Evaluation of Existing Buildings written by Lorne Gavinchuk and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Retrofit of Existing Buildings written by Matthew Fox and published by Emerald Group Publishing. This book was released on 2024-09-19 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Retrofit of Existing Buildings is a concise and easy-to-use guideline for practising engineers to assess and design successful seismic retrofit interventions for existing vulnerable buildings. It offers readers guidance on both conceptual design strategies and relevant detailed design considerations.
Download or read book Guidelines for Seismic Evaluation and Design of Petrochemical Facilities written by American Society of Civil Engineers. Task Committee on Seismic Evaluation and Design and published by Amer Society of Civil Engineers. This book was released on 2011 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: These guidelines offer practical recommendations on several aspects affecting the design and safety of new and existing petrochemical facilities both during and following an earthquake. In the area of new design, this book emphasizes interpretations of the intent of building codes as applied to petrochemical facilities, and gives practical guidance on design details and considerations that are not included in building codes. For existing facilities, the authors present evaluation methodologies that rely heavily on experience from past earthquakes, coupled with focused analyses. Guidelines for Seismic Evaluation and Design of Petrochemical Facilities is an updated edition in a collection of state-of-the-practice reports produced by the ASCE Petrochemical Committee. It will be valuable to structural design engineers, operating company personnel responsible for establishing seismic design and construction standards, and local building authorities.
Download or read book Seismic Rehabilitation of Existing Buildings written by American Society of Civil Engineers and published by ASCE Publications. This book was released on 2007 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard ASCE/SEI 41-06 presents the latest generation of performance-based seismic rehabilitation methodology.
Download or read book Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment Frame Buildings FEMA 351 written by Federal Emergency Agency and published by FEMA. This book was released on 2013-03-16 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report, FEMA-351 - Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings has been developed by the SAC Joint Venture under contract to the Federal Emergency Management Agency (FEMA) to provide structural engineers with recommended criteria for evaluation of the probable performance of existing steel moment-frame buildings in future earthquakes and to provide a basis for updating and revision of evaluation and rehabilitation guidelines and standards. It is one of a series of companion publications addressing the issue of the seismic performance of steel moment-frame buildings. The set of companion publications includes: FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings. This publication provides recommended criteria, supplemental to FEMA-302 - 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, for the design and construction of steel moment-frame buildings and provides alternative performance-based design criteria. FEMA-351 - Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings. This publication provides recommended methods to evaluate the probable performance of existing steel moment-frame buildings in future earthquakes and to retrofit these buildings for improved performance. FEMA-352 - Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings. This publication provides recommendations for performing postearthquake inspections to detect damage in steel moment-frame buildings following an earthquake, evaluating the damaged buildings to determine their safety in the postearthquake environment, and repairing damaged buildings. FEMA-353 - Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications. This publication provides recommended specifications for the fabrication and erection of steel moment frames for seismic applications. The recommended design criteria contained in the other companion documents are based on the material and workmanship standards contained in this document, which also includes discussion of the basis for the quality control and quality assurance criteria contained in the recommended specifications. The information contained in these recommended evaluation and upgrade criteria, hereinafter referred to as Recommended Criteria, is presented in the form of specific recommendations for design and performance evaluation procedures together with supporting commentary explaining part of the basis for these recommendations.
Download or read book Seismic Assessment and Retrofit of Reinforced Concrete Buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003-08-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: In most parts of the developed world, the building stock and the civil infrastructure are ageing and in constant need of maintenance, repair and upgrading. Moreover, in the light of our current knowledge and of modern codes, the majority of buildings stock and other types of structures in many parts of the world are substandard and deficient. This is especially so in earthquake-prone regions, as, even there, seismic design of structures is relatively recent. In those regions the major part of the seismic threat to human life and property comes from old buildings. Due to the infrastructure's increasing decay, frequently combined with the need for structural upgrading to meet more stringent design requirements (especially against seismic loads), structural retrofitting is becoming more and more important and receives today considerable emphasis throughout the world. In response to this need, a major part of the fib Model Code 2005, currently under development, is being devoted to structural conservation and maintenance. More importantly, in recognition of the importance of the seismic threat arising from existing substandard buildings, the first standards for structural upgrading to be promoted by the international engineering community and by regulatory authorities alike are for seismic rehabilitation of buildings. This is the case, for example, of Part 3: Strengthening and Repair of Buildings of Eurocode 8 (i. e. of the draft European Standard for earthquake-resistant design), and which is the only one among the current (2003) set of 58 Eurocodes attempting to address the problem of structural upgrading. It is also the case of the recent (2001) ASCE draft standard on Seismic evaluation of existing buildings and of the 1996 Law for promotion of seismic strengthening of existing reinforced concrete structures in Japan. As noted in Chapter 1 of this Bulletin, fib - as CEB and FIP did before - has placed considerable emphasis on assessment and rehabilitation of existing structures. The present Bulletin is a culmination of this effort in the special but very important field of seismic assessment and rehabilitation. It has been elaborated over a period of 4 years by Task Group 7.1 Assessment and retrofit of existing structures of fib Commission 7 Seismic design, a truly international team of experts, representing the expertise and experience of all the important seismic regions of the world. In the course of its work the team had six plenary two-day meetings: in January 1999 in Pavia, Italy; in August 1999 in Raleigh, North Carolina; in February 2000 in Queenstown, New Zealand; in July 2000 in Patras, Greece; in March 2001 in Lausanne, Switzerland; and in August 2001 in Seattle, Washington. In October 2002 the final draft of the Bulletin was presented to public during the 1st fib Congress in Osaka. It was also there that it was approved by fib Commission 7 Seismic Design. The contents is structured into main chapters as follows: 1 Introduction - 2 Performance objectives and system considerations - 3 Review of seismic assessment procedures - 4 Strength and deformation capacity of non-seismically detailed components - 5 Seismic retrofitting techniques - 6 Probabilistic concepts and methods - 7 Case studies
Download or read book Standards of Seismic Safety for Existing Federally Owned and Leased Buildings written by John Harris and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: RP 10 allows federal agencies to identify conditions in an existing building that may pose unacceptable seismic risks to the agency in case of undesirable performance of the building during an earthquake. Agency exposure to unacceptable risks is generally determined through a seismic evaluation and risk assessment of the building. RP 10 provides triggers for a seismic evaluation for project circumstances such as major alterations, additions, or repairs, as well as change of use or leasing requirements. Evaluation necessitated by triggers is referred to as the mandatory process. RP 10 additionally addresses risk awareness by having agencies proactively implement evaluations based on inventory screening, which is independent of passive trigger requirements identified in the mandatory process. This process is referred to as the screening process. RP 10 provides circumstances to assist an agency in developing a screening process. RP 10 also identifies buildings exempt from seismic evaluation. RP 10 provides the minimum seismic performance objective for evaluation of existing buildings owned or leased by the Federal Government. The basic performance objective is based on risk to occupant safety in a large, rare earthquake by total or partial collapse of the building. Higher performance objectives are provided that can be used to assess the risks of loss of operative systems, extended re-occupancy and recovery time, or economic losses. RP 10 references model building codes published by the International Code Council as well as national consensus standards published by the American Society of Civil Engineers to provide the basis for defining seismic performance objectives, evaluation procedures, and, where necessary, retrofit criteria.
Download or read book Seismic Evaluation of Existing Buildings written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 2003-01-01 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a three-tiered process for seismic evaluation of existing buildings in any level of seismicity. This standard is intended to serve as a nationally applicable tool for design professionals, code officials, and building owners looking to seismically evaluate existing buildings. It considers various aspects of building performance.
