Download or read book Guidelines for Open Pit Slope Design in Weak Rocks written by Derek Martin and published by CSIRO PUBLISHING. This book was released on 2018-01-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weak rocks encountered in open pit mines cover a wide variety of materials, with properties ranging between soil and rock. As such, they can provide a significant challenge for the slope designer. For these materials, the mass strength can be the primary control in the design of the pit slopes, although structures can also play an important role. Because of the typically weak nature of the materials, groundwater and surface water can also have a controlling influence on stability. Guidelines for Open Pit Slope Design in Weak Rocks is a companion to Guidelines for Open Pit Slope Design, which was published in 2009 and dealt primarily with strong rocks. Both books were commissioned under the Large Open Pit (LOP) project, which is sponsored by major mining companies. These books provide summaries of the current state of practice for the design, implementation and assessment of slopes in open pits, with a view to meeting the requirements of safety, as well as the recovery of anticipated ore reserves. This book, which follows the general cycle of the slope design process for open pits, contains 12 chapters. These chapters were compiled and written by industry experts and contain a large number of case histories. The initial chapters address field data collection, the critical aspects of determining the strength of weak rocks, the role of groundwater in weak rock slope stability and slope design considerations, which can differ somewhat from those applied to strong rock. The subsequent chapters address the principal weak rock types that are encountered in open pit mines, including cemented colluvial sediments, weak sedimentary mudstone rocks, soft coals and chalk, weak limestone, saprolite, soft iron ores and other leached rocks, and hydrothermally altered rocks. A final chapter deals with design implementation aspects, including mine planning, monitoring, surface water control and closure of weak rock slopes. As with the other books in this series, Guidelines for Open Pit Slope Design in Weak Rocks provides guidance to practitioners involved in the design and implementation of open pit slopes, particularly geotechnical engineers, mining engineers, geologists and other personnel working at operating mines.

Download or read book Guidelines for Open Pit Slope Design written by John Read and published by CSIRO PUBLISHING. This book was released on 2009-11-09 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Open Pit Slope Design is a comprehensive account of the open pit slope design process. Created as an outcome of the Large Open Pit (LOP) project, an international research and technology transfer project on rock slope stability in open pit mines, this book provides an up-to-date compendium of knowledge of the slope design processes that should be followed and the tools that are available to aid slope design practitioners. This book links innovative mining geomechanics research into the strength of closely jointed rock masses with the most recent advances in numerical modelling, creating more effective ways for predicting rock slope stability and reliability in open pit mines. It sets out the key elements of slope design, the required levels of effort and the acceptance criteria that are needed to satisfy best practice with respect to pit slope investigation, design, implementation and performance monitoring. Guidelines for Open Pit Slope Design comprises 14 chapters that directly follow the life of mine sequence from project commencement through to closure. It includes: information on gathering all of the field data that is required to create a 3D model of the geotechnical conditions at a mine site; how data is collated and used to design the walls of the open pit; how the design is implemented; up-to-date procedures for wall control and performance assessment, including limits blasting, scaling, slope support and slope monitoring; and how formal risk management procedures can be applied to each stage of the process. This book will assist in meeting stakeholder requirements for pit slopes that are stable, in regards to safety, ore recovery and financial return, for the required life of the mine.

Download or read book Guidelines for Slope Performance Monitoring written by Robert Sharon and published by CSIRO PUBLISHING. This book was released on 2020-07-01 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although most mining companies utilise systems for slope monitoring, experience indicates that mining operations continue to be surprised by the occurrence of adverse geotechnical events. A comprehensive and robust performance monitoring system is an essential component of slope management in an open pit mining operation. The development of such a system requires considerable expertise to ensure the monitoring system is effective and reliable. Written by instrumentation experts and geotechnical practitioners, Guidelines for Slope Performance Monitoring is an initiative of the Large Open Pit (LOP) Project and the fifth book in the Guidelines for Open Pit Slope Design series. Its 10 chapters present the process of establishing and operating a slope monitoring system; the fundamentals of pit slope monitoring instrumentation and methods; monitoring system operation; data acquisition, management and analysis; and utilising and communicating monitoring results. The implications of increased automation of mining operations are also discussed, including the future requirements of performance monitoring. Guidelines for Slope Performance Monitoring summarises leading mine industry practice in monitoring system design, implementation, system management, data management and reporting, and provides guidance for engineers, geologists, technicians and others responsible for geotechnical risk management.

Download or read book Guidelines for Evaluating Water in Pit Slope Stability written by Geoff Beale and published by CSIRO PUBLISHING. This book was released on 2013-12-17 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Evaluating Water in Pit Slope Stability is a comprehensive account of the hydrogeological procedures that should be followed when performing open pit slope stability design studies. Created as an outcome of the Large Open Pit (LOP) project, an international research and technology transfer project on the stability of rock slopes in open pit mines, this book expands on the hydrogeological model chapter in the LOP project's previous book Guidelines for Open Pit Slope Design (Read & Stacey, 2009; CSIRO PUBLISHING). The book comprises six sections which outline the latest technology and best practice procedures for hydrogeological investigations. The sections cover: the framework used to assess the effect of water in slope stability; how water pressures are measured and tested in the field; how a conceptual hydrogeological model is prepared; how water pressures are modelled numerically; how slope depressurisation systems are implemented; and how the performance of a slope depressurisation program is monitored and reconciled with the design. Guidelines for Evaluating Water in Pit Slope Stability offers slope design practitioners a road map that will help them decide how to investigate and treat water pressures in pit slopes. It provides guidance and essential information for mining and civil engineers, geotechnical engineers, engineering geologists and hydrogeologists involved in the investigation, design and construction of stable rock slopes.

Download or read book Guidelines for Mine Waste Dump and Stockpile Design written by Mark Hawley and published by CSIRO PUBLISHING. This book was released on 2017-04-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Mine Waste Dump and Stockpile Design is a comprehensive, practical guide to the investigation, design, operation and monitoring of mine waste dumps, dragline spoils and major stockpiles associated with large open pit mines. These facilities are some of the largest man-made structures on Earth, and while most have performed very well, there are cases where instabilities have occurred with severe consequences, including loss of life and extensive environmental and economic damage. Developed and written by industry experts with extensive knowledge and experience, this book is an initiative of the Large Open Pit (LOP) Project. It comprises 16 chapters that follow the life cycle of a mine waste dump, dragline spoil or stockpile from site selection to closure and reclamation. It describes the investigation and design process, introduces a comprehensive stability rating and hazard classification system, provides guidance on acceptability criteria, and sets out the key elements of stability and runout analysis. Chapters on site and material characterisation, surface water and groundwater characterisation and management, risk assessment, operations and monitoring, management of ARD, emerging technologies and closure are included. A chapter is also dedicated to the analysis and design of dragline spoils. Guidelines for Mine Waste Dump and Stockpile Design summarises the current state of practice and provides insight and guidance to mine operators, geotechnical engineers, mining engineers, hydrogeologists, geologists and other individuals that are responsible at the mine site level for ensuring the stability and performance of these structures. Readership includes mining engineers, geotechnical engineers, civil engineers, engineering geologists, hydrogeologists, environmental scientists, and other professionals involved in the site selection, investigation, design, permitting, construction, operation, monitoring, closure and reclamation of mine waste dumps and stockpiles.

Download or read book Rock Slope Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2017-09-18 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Slope Engineering covers the investigation, design, excavation and remediation of man-made rock cuts and natural slopes, primarily for civil engineering applications. It presents design information on structural geology, shear strength of rock and ground water, including weathered rock. Slope design methods are discussed for planar, wedge, circular and toppling failures, including seismic design and numerical analysis. Information is also provided on blasting, slope stabilization, movement monitoring and civil engineering applications. This fifth edition has been extensively up-dated, with new chapters on weathered rock, including shear strength in relation to weathering grades, and seismic design of rock slopes for pseudo-static stability and Newmark displacement. It now includes the use of remote sensing techniques such as LiDAR to monitor slope movement and collect structural geology data. The chapter on numerical analysis has been revised with emphasis on civil applications. The book is written for practitioners working in the fields of transportation, energy and industrial development, and undergraduate and graduate level courses in geological engineering.

Download or read book Guidelines for Open Pit Slope Design in Weak Rocks written by Derek Martin and published by CSIRO PUBLISHING. This book was released on 2018-01-10 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weak rocks encountered in open pit mines cover a wide variety of materials, with properties ranging between soil and rock. As such, they can provide a significant challenge for the slope designer. For these materials, the mass strength can be the primary control in the design of the pit slopes, although structures can also play an important role. Because of the typically weak nature of the materials, groundwater and surface water can also have a controlling influence on stability. Guidelines for Open Pit Slope Design in Weak Rocks is a companion to Guidelines for Open Pit Slope Design, which was published in 2009 and dealt primarily with strong rocks. Both books were commissioned under the Large Open Pit (LOP) project, which is sponsored by major mining companies. These books provide summaries of the current state of practice for the design, implementation and assessment of slopes in open pits, with a view to meeting the requirements of safety, as well as the recovery of anticipated ore reserves. This book, which follows the general cycle of the slope design process for open pits, contains 12 chapters. These chapters were compiled and written by industry experts and contain a large number of case histories. The initial chapters address field data collection, the critical aspects of determining the strength of weak rocks, the role of groundwater in weak rock slope stability and slope design considerations, which can differ somewhat from those applied to strong rock. The subsequent chapters address the principal weak rock types that are encountered in open pit mines, including cemented colluvial sediments, weak sedimentary mudstone rocks, soft coals and chalk, weak limestone, saprolite, soft iron ores and other leached rocks, and hydrothermally altered rocks. A final chapter deals with design implementation aspects, including mine planning, monitoring, surface water control and closure of weak rock slopes. As with the other books in this series, Guidelines for Open Pit Slope Design in Weak Rocks provides guidance to practitioners involved in the design and implementation of open pit slopes, particularly geotechnical engineers, mining engineers, geologists and other personnel working at operating mines.

Download or read book Soft Rock Mechanics and Engineering written by Milton Kanji and published by Springer Nature. This book was released on 2019-11-24 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a practical reference guide to soft rock mechanics for engineers and scientists. Written by recognized experts, it will benefit professionals, contractors, academics, researchers and students working on rock engineering projects in the fields of civil engineering, mining and construction engineering. Soft Rock Mechanics and Engineering covers a specific subject of great relevance in Rock Mechanics – and one that is directly connected to the design of geotechnical structures under difficult ground conditions. The book addresses practical issues related to the geomechanical properties of these types of rock masses and their characterization, while also discussing advances regarding in situ investigation, safety, and monitoring of geotechnical structures in soft rocks. Lastly, it presents important case histories involving tunnelling, dam foundations, coal and open pit mines and landslides.

Download or read book Surface Subsidence Engineering written by Syd Peng and published by CSIRO PUBLISHING. This book was released on 2020-09-01 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground coal mining disturbs both the overburden strata and the immediate floor strata. The subject of surface subsidence deals with the issues associated with the movement of overburden strata, which are the layers from the seam to the surface, where structures and water resources important to human activities are located. Surface Subsidence Engineering provides comprehensive coverage of the major issues associated with surface subsidence. The chapters are written by experts on surface subsidence in the three leading coal producing and consuming countries in the world: Australia, China and the United States. They discuss general features and terminologies, subsidence prediction, subsidence measurement techniques, subsidence impact on water bodies, subsidence damage, mitigation and control, and subsidence on abandoned coal mines. In addition, the final chapter addresses some of the unique features of surface subsidence found in Australian coal mines. The book provides information on coal seams ranging from flat to gently inclined to steep to ultra-steep seams. Written for mining engineers, geotechnical engineers and students of mining engineering, this book covers both theories and practices of surface subsidence. Unlike previous publications, it also deals with the subsidence impact on surface and groundwater bodies, crucial resources that are often neglected by subsidence researchers.

Download or read book Geotechnical Slope Analysis written by Robin Chowdhury and published by CRC Press. This book was released on 2009-11-18 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Freshly updated and extended version of Slope Analysis (Chowdhury, Elsevier, 1978). This reference book gives a complete overview of the developments in slope engineering in the last 30 years. Its multi-disciplinary, critical approach and the chapters devoted to seismic effects and probabilistic approaches and reliability analyses, reflect the distinctive style of the original. Subjects discussed are: the understanding of slope performance, mechanisms of instability, requirements for modeling and analysis, and new techniques for observation and modeling. Special attention is paid to the relation with the increasing frequency and consequences of natural and man-made hazards. Strategies and methods for assessing landslide susceptibility, hazard and risk are also explored. Moreover, the relevance of geotechnical analysis of slopes in the context of climate change scenarios is discussed. All theory is supported by numerous examples. ''...A wonderful book on Slope Stability....recommended as a refernence book to those who are associated with the geotechnical engineering profession (undergraduates, post graduates and consulting engineers)...'' Prof. Devendra Narain Singh, Indian Inst. of Technology, Mumbai, India ''I have yet to see a book that excels the range and depth of Geotechnical Slope Analysis... I have failed to find a topic which is not covered and that makes the book almost a single window outlet for the whole range of readership from students to experts and from theoreticians to practicing engineers...'' Prof. R.K. Bhandari, New Delhi, India

Download or read book Rock Slope Engineering written by Evert Hoek and published by CRC Press. This book was released on 1981-06-30 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic handbook deals with the geotechnical problems of rock slope design. It has been written for the non-specialist mining or civil engineer, with worked examples, design charts, coverage of more detailed analytical methods, and of the collection and interpretation of geological and groundwater information and tests for the mechanical properties of rock.

Download or read book Evaluation of Soil and Rock Properties written by P. J. Sabatini and published by . This book was released on 2004-10-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographical Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measures for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.

Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.

Download or read book Rock Mechanics written by Barry H.G. Brady and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition has been completely revised to reflect the notable innovations in mining engineering and the remarkable developments in the science of rock mechanics and the practice of rock angineering taht have taken place over the last two decades. Although "Rock Mechanics for Underground Mining" addresses many of the rock mechanics issues that arise in underground mining engineering, it is not a text exclusively for mining applications. Based on extensive professional research and teaching experience, this book will provide an authoratative and comprehensive text for final year undergraduates and commencing postgraduate stydents. For profesional practitioners, not only will it be of interests to mining and geological engineers, but also to civil engineers, structural mining geologists and geophysicists as a standard work for professional reference purposes.

Download or read book The Plastic Banknote written by David Solomon and published by CSIRO PUBLISHING. This book was released on 2014-11-05 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Have you got any ideas on how to make a better banknote?' In the late 1960s, the detection of counterfeit banknotes and the rise of new photographic and copying technologies prompted the Reserve Bank of Australia to explore options for increasing the security of currency. A top-secret research project, undertaken by CSIRO and the Bank, resulted in the development of the world’s first successful polymer banknotes. This technology is now used in over 30 countries. This book describes the story of the Currency Notes Research and Development project from its inception in 1968 through to the release of the $10 Australian bicentennial plastic banknote in 1988. It exemplifies a market-driven project which resulted in advances in science, technology and approaches to commercialisation, and a fundamental change in banknote security.

Download or read book Rock Foundations written by United States. Army. Corps of Engineers and published by . This book was released on 1994 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fijian Medicinal Plants written by RC Cambie and published by CSIRO PUBLISHING. This book was released on 1994-01-01 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive compilation presents the available reports on the medicinal use of Fijian plants in an attractive and readable form using 'everyday' terms as much as possible. The book covers the origin and dispersal of plants, literature, use of medicinal plants within traditional Fijian culture, diseases of Fiji, and medicinal chemicals from plants. Four hundred and fifty plant species are described.The entries for species are arranged by plant family, and give current botanical name, Fijian or local name, brief botanical notes, medicinal uses and chemistry. Separate indexes to plant species and Fijian names are provided, as well as a glossary of medicinal and botanical terms.This book may point the way to plants from which new and effective cures might be obtained.