Download or read book Guidelines for More Effective Engineering Proposals written by frank W. Evans and published by . This book was released on 1961 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Integrating Process Safety into Engineering Projects written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2018-12-11 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is much industry guidance on implementing engineering projects and a similar amount of guidance on Process Safety Management (PSM). However, there is a gap in transferring the key deliverables from the engineering group to the operations group, where PSM is implemented. This book provides the engineering and process safety deliverables for each project phase along with the impacts to the project budget, timeline and the safety and operability of the delivered equipment.
Download or read book A Framework for K 12 Science Education written by National Research Council and published by National Academies Press. This book was released on 2012-02-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, engineering, and technology permeate nearly every facet of modern life and hold the key to solving many of humanity's most pressing current and future challenges. The United States' position in the global economy is declining, in part because U.S. workers lack fundamental knowledge in these fields. To address the critical issues of U.S. competitiveness and to better prepare the workforce, A Framework for K-12 Science Education proposes a new approach to K-12 science education that will capture students' interest and provide them with the necessary foundational knowledge in the field. A Framework for K-12 Science Education outlines a broad set of expectations for students in science and engineering in grades K-12. These expectations will inform the development of new standards for K-12 science education and, subsequently, revisions to curriculum, instruction, assessment, and professional development for educators. This book identifies three dimensions that convey the core ideas and practices around which science and engineering education in these grades should be built. These three dimensions are: crosscutting concepts that unify the study of science through their common application across science and engineering; scientific and engineering practices; and disciplinary core ideas in the physical sciences, life sciences, and earth and space sciences and for engineering, technology, and the applications of science. The overarching goal is for all high school graduates to have sufficient knowledge of science and engineering to engage in public discussions on science-related issues, be careful consumers of scientific and technical information, and enter the careers of their choice. A Framework for K-12 Science Education is the first step in a process that can inform state-level decisions and achieve a research-grounded basis for improving science instruction and learning across the country. The book will guide standards developers, teachers, curriculum designers, assessment developers, state and district science administrators, and educators who teach science in informal environments.
Download or read book Requirements in Engineering Projects written by João M. Fernandes and published by Springer. This book was released on 2015-07-18 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on various topics related to engineering and management of requirements, in particular elicitation, negotiation, prioritisation, and documentation (whether with natural languages or with graphical models). The book provides methods and techniques that help to characterise, in a systematic manner, the requirements of the intended engineering system. It was written with the goal of being adopted as the main text for courses on requirements engineering, or as a strong reference to the topics of requirements in courses with a broader scope. It can also be used in vocational courses, for professionals interested in the software and information systems domain. Readers who have finished this book will be able to: - establish and plan a requirements engineering process within the development of complex engineering systems; - define and identify the types of relevant requirements in engineering projects; - choose and apply the most appropriate techniques to elicit the requirements of a given system; - conduct and manage negotiation and prioritisation processes for the requirements of a given engineering system; - document the requirements of the system under development, either in natural language or with graphical and formal models. Each chapter includes a set of exercises.
Download or read book Software Management written by Donald J. Reifer and published by John Wiley & Sons. This book was released on 2006-08-30 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Seventh Edition of Donald Reifer's popular, bestselling tutorial summarizes what software project managers need to know to be successful on the job. The text provides pointers and approaches to deal with the issues, challenges, and experiences that shape their thoughts and performance. To accomplish its goals, the volume explores recent advances in dissimilar fields such as management theory, acquisition management, globalization, knowledge management, licensing, motivation theory, process improvement, organization dynamics, subcontract management, and technology transfer. Software Management provides software managers at all levels of the organization with the information they need to know to develop their software engineering management strategies for now and the future. The book provides insight into management tools and techniques that work in practice. It also provides sufficient instructional materials to serve as a text for a course in software management. This new edition achieves a balance between theory and practical experience. Reifer systematically addresses the skills, knowledge, and abilities that software managers, at any level of experience, need to have to practice their profession effectively. This book contains original articles by leaders in the software management field written specifically for this tutorial, as well as a collection of applicable reprints. About forty percent of the material in this edition has been produced specifically for the tutorial. Contents: * Introduction * Life Cycle Models * Process Improvement * Project Management * Planning Fundamentals * Software Estimating * Organizing for Success * Staffing Essentials * Direction Advice * Visibility and Control * Software Risk Management * Metrics and Measurement * Acquisition Management * Emerging Management Topics "The challenges faced by software project managers are the gap between what the customers can envision and the reality on the ground and how to deal with the risks associated with this gap in delivering a product that meets requirements on time and schedule at the target costs. This tutorial hits the mark by providing project managers, practitioners, and educators with source materials on how project managers can effectively deal with this risk." -Dr. Kenneth E. Nidiffer, Systems & Software Consortium, Inc. "The volume has evolved into a solid set of foundation works for anyone trying to practice software management in a world that is increasingly dependent on software release quality, timeliness, and productivity." -Walker Royce, Vice President, IBM Software Services-Rational
Download or read book Contracting Opportunities written by and published by . This book was released on 1983 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compendium of GAO s Views on the Cost Saving Proposals of the Grace Commission Individual issue analyses written by United States. General Accounting Office and published by . This book was released on 1985 with total page 1320 pages. Available in PDF, EPUB and Kindle. Book excerpt: In response to a congressional request, GAO examined issues studied and recommendations made by the President's Private Sector Survey on Cost Control, better known as the Grace Commission, to determine whether: (1) the issues and recommendations made on program management and cost control had merit; (2) legislation would be necessary to implement the recommendations; (3) implementation efforts were completely underway; and (4) the savings estimates were realistic. GAO found that many of the issues studied and recommendations made by the Commission had overall merit and that, while many have already been implemented by legislative or administrative action, many more require additional legislative action to be fully implemented. However, GAO questioned the accuracy of many of the associated savings estimates, found flaws in the methodology used to develop some of the estimates, and found that the description of the methodology used in some estimates was insufficient to allow an assessment of its validity. In most of the instances where GAO questioned the methodology used, it believed that the savings were overstated. GAO supported management improvement issues more frequently than policy-oriented issues; however, policy-oriented issues constitute a large portion of the total estimated savings. GAO does not support restructuring federal subsidy programs and fixing federal health care costs to a percentage of the gross national product, and it disagreed with selected aspects of recommendations to reduce civilian and military retirement benefits. GAO support was most extensive in the areas aimed at strengthening federal management systems, federal automatic data processing operations, federal credit and cash management efforts, and civilian procurement and property management activities. GAO has made similar or related recommendations in nearly half of the areas in which it agreed with the Commission. Additional legislative action would be necessary to fully implement approximately half of the recommendations analyzed.
Download or read book Writing Successful Science Proposals written by Andrew J. Friedland and published by Yale University Press. This book was released on 2018-08-07 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative how-to guide that explains every aspect of science proposal writing This fully revised edition of the authoritative guide to science proposal writing is an essential tool for any researcher embarking on a grant or thesis application. In accessible steps, the authors detail every stage of proposal writing, from conceiving and designing a project to analyzing data, synthesizing results, estimating a budget, and addressing reviewer comments and resubmitting. This new edition is updated to address changes and developments over the past decade, including identifying opportunities and navigating the challenging proposal funding environment. The only how-to book of its kind, it includes exercises to help readers stay on track as they develop their grant proposals and is designed for those in the physical, life, environmental, biomedical, and social sciences, as well as engineering.
Download or read book Federal Register written by and published by . This book was released on 1972 with total page 2304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Senior Design Projects in Mechanical Engineering written by Yongsheng Ma and published by Springer Nature. This book was released on 2021-11-10 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers invaluable insights about the full spectrum of core design course contents systematically and in detail. This book is for instructors and students who are involved in teaching and learning of ‘capstone senior design projects’ in mechanical engineering. It consists of 17 chapters, over 300 illustrations with many real-world student project examples. The main project processes are grouped into three phases, i.e., project scoping and specification, conceptual design, and detail design, and each has dedicated two chapters of process description and report content prescription, respectively. The basic principles and engineering process flow are well applicable for professional development of mechanical design engineers. CAD/CAM/CAE technologies are commonly used within many project examples. Thematic chapters also cover student teamwork organization and evaluation, project management, design standards and regulations, and rubrics of course activity grading. Key criteria of successful course accreditation and graduation attributes are discussed in details. In summary, it is a handy textbook for the capstone design project course in mechanical engineering and an insightful teaching guidebook for engineering design instructors.
Download or read book H R 1391 the Recycling Coal Combustion Residuals Accessibility Act of 2011 written by United States. Congress. House. Committee on Energy and Commerce. Subcommittee on Environment and the Economy and published by . This book was released on 2011 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Handbook for Building and Civil Engineering Projects written by Roger Venables and published by Thomas Telford. This book was released on 1994 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook contains information and practical guidance on the environmental issues likely to be encountered at each stage in the tendering and construction phases of a builidng or civil engineering project. It is aimed at informing construciton managers, clients, designers and other consultants, engineers and scientists on their obligations and the opportunities open to them to improve the industrys environmental performance.
Download or read book Industrial Engineering Projects written by Association of Cost Engineers and the Royal Institute of Cha and published by CRC Press. This book was released on 2014-04-21 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a clear explanation of the commercial, contractual and statutory aspects of a capital project in the process industries from feasability studies, through commissioning/contract; to construction operation.
Download or read book Savannah Harbor Expansion Project Chatman County Georgia and Jasper County South Carolina written by United States. Office of the Assistant Secretary of the Army (Civil Works) and published by . This book was released on 2013 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Federal Aviation Regulations written by United States. Federal Aviation Administration and published by . This book was released on 1994 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidance for Cost Estimation and Management for Highway Projects During Planning Programming and Preconstruction written by Stuart D. Anderson and published by Transportation Research Board. This book was released on 2007 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'TRB's National Cooperative Highway Research Program (NCHRP) Report 574: Guidance for Cost Estimation and Management for Highway Projects During Planning, Programming, and Preconstruction explores approaches to cost estimation and management designed to overcome the root causes of cost escalation and to support the development of consistent and accurate project estimates through all phases of the development process, from long-range planning, through priority programming, and through project design. NCHRP Web-Only Document 98 details the steps followed by the research team in the development of NCHRP Report 574"--Publisher's description.
Download or read book Contracts for Construction and Engineering Projects written by Donald Charrett and published by Taylor & Francis. This book was released on 2021-12-22 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contracts for Construction and Engineering Projects provides unique and invaluable guidance on the role of contracts in construction and engineering projects. The work explores various aspects of the intersection of contracts and construction projects involving the work of engineers and other professionals engaged in construction, whether as project managers, designers, constructors, contract administrators, schedulers, claims consultants, forensic engineers or expert witnesses. Compiling papers written and edited by the author, refined and expanded with additional chapters in this new edition, this book draws together a lifetime of lessons learned in these fields and covers the topics a practising professional might encounter in construction and engineering projects, developed in bite-sized chunks. The chapters are divided into five key parts: 1. The engineer and the contract 2. The project and the contract 3. Avoidance and resolution of disputes 4. Forensic engineers and expert witnesses, and 5. International construction contracts. The inclusion of numerous case studies to illustrate the importance of getting the contract right before it is entered into – and the consequences that may ensue if this is not done – makes this book essential reading for professionals practising in any area of design, construction, contract administration, preparation of claims or expert evidence, as well as construction lawyers who interact with construction professionals.
