Download or read book Underground Mining Methods written by W. A. Hustrulid and published by SME. This book was released on 2001 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground Mining Methods presents the latest principles and techniques in use today. Reflecting the international and diverse nature of the industry, a series of mining case studies is presented covering the commodity range from iron ore to diamonds extracted by operations located in all corners of the world. Industry experts have contributed 77 chapters. This book is certain to become a standard for every practicing mining engineer and student alike. Sections include: General Mine Design Considerations, Room-and-Pillar Mining of Hard Rock/Soft Rock, Longwall Mining of Hard Rock, Shrinkage Stoping, Sublevel Stoping, Cut-and-Fill Mining, Sublevel Caving, Panel Caving, Foundations for Design, and Underground Mining Looks to the Future.
Download or read book Surface and Underground Excavations 2nd Edition written by Ratan Raj Tatiya and published by CRC Press. This book was released on 2013-05-13 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface and Underground Excavations – Methods, Techniques and Equipment (2nd edition) covers the latest technologies and developments in the excavation arena at any locale: surface or underground. In the first few chapters, unit operations are discussed and subsequently, excavation techniques are described for various operations: tunnelling, drifting, raising, sinking, stoping, quarrying, surface mining, liquidation and mass blasting as well as construction of large subsurface excavations such as caverns and underground chambers. The design, planning and development of excavations are treated in a separate chapter. Especially featured are methodologies to select stoping methods through incremental analysis. Furthermore, this edition encompasses comprehensive sections on mining at ‘ultra depths’, mining difficult deposits using non-conventional technologies, mineral inventory evaluation (ore – reserves estimation) and mine closure. Concerns over Occupational Health and Safety (OHS), environment and loss prevention, and sustainable development are also addressed in advocating a solution to succeed within a scenario of global competition and recession. This expanded second edition has been wholly revised, brought fully up-to-date and includes (wherever feasible) the latest trends and best practices, case studies, global surveys and toolkits as well as questions at the end of each chapter. This volume will now be even more appealing to students in earth sciences, geology, and in civil, mining and construction engineering, to practicing engineers and professionals in these disciplines as well as to all with a general or professional interest in surface and underground excavations.
Download or read book Hard Rock Miner s Handbook written by Jack De la Vergne and published by . This book was released on 2008 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface and Underground Excavations written by Ratan Raj Tatiya and published by CRC Press. This book was released on 2013-05-13 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface and Underground Excavations – Methods, Techniques and Equipment (2nd edition) covers the latest technologies and developments in the excavation arena at any locale: surface or underground. In the first few chapters, unit operations are discussed and subsequently, excavation techniques are described for various operations: tunnelling, drifting, raising, sinking, stoping, quarrying, surface mining, liquidation and mass blasting as well as construction of large subsurface excavations such as caverns and underground chambers. The design, planning and development of excavations are treated in a separate chapter. Especially featured are methodologies to select stoping methods through incremental analysis. Furthermore, this edition encompasses comprehensive sections on mining at ‘ultra depths’, mining difficult deposits using non-conventional technologies, mineral inventory evaluation (ore – reserves estimation) and mine closure. Concerns over Occupational Health and Safety (OHS), environment and loss prevention, and sustainable development are also addressed in advocating a solution to succeed within a scenario of global competition and recession. This expanded second edition has been wholly revised, brought fully up-to-date and includes (wherever feasible) the latest trends and best practices, case studies, global surveys and toolkits as well as questions at the end of each chapter. This volume will now be even more appealing to students in earth sciences, geology, and in civil, mining and construction engineering, to practicing engineers and professionals in these disciplines as well as to all with a general or professional interest in surface and underground excavations.
Download or read book SME Mining Engineering Handbook Third Edition written by Peter Darling and published by SME. This book was released on 2011 with total page 1912 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of the SME Mining Engineering Handbook reaffirms its international reputation as "the handbook of choice" for today's practicing mining engineer. It distills the body of knowledge that characterizes mining engineering as a disciplinary field and has subsequently helped to inspire and inform generations of mining professionals.Virtually all of the information is original content, representing the latest information from more than 250 internationally recognized mining industry experts. Within the handbook's 115 thought-provoking chapters are current topics relevant to today's mining professional: Analyzing how the mining and minerals industry will develop over the medium and long term--why such changes are inevitable, what this will mean in terms of challenges, and how they could be managed Explaining the mechanics associated with the multifaceted world of mine and mineral economics, from the decisions associated with how best to finance a single piece of high-value equipment to the long-term cash-flow issues associated with mine planning at a mature operation Describing the recent and ongoing technical initiatives and engineering developments in relation to robotics, automation, acid rock drainage, block caving optimization, or process dewatering methods Examining in detail the methods and equipment available to achieve efficient, predictable, and safe rock breaking, whether employing a tunnel boring machine for development work, mineral extraction using a mobile miner, or cast blasting at a surface coal operation Identifying the salient points that dictate which is the safest, most efficient, and most versatile extraction method to employ, as well as describing in detail how each alternative is engineered Discussing the impacts that social and environmental issues have on mining from the pre-exploration phase to end-of-mine issues and beyond, and how to manage these two increasingly important factors to the benefit of both the mining companies and other stakeholders
Download or read book Underground Mining Methods Handbook written by Society of Mining Engineers of AIME. and published by Society for Mining Metallurgy. This book was released on 1982 with total page 1754 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cut and fill Stoping written by Charles H. Johnson and published by . This book was released on 1933 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rock Mechanics written by Barry H.G. Brady and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition has been completely revised to reflect the notable innovations in mining engineering and the remarkable developments in the science of rock mechanics and the practice of rock angineering taht have taken place over the last two decades. Although "Rock Mechanics for Underground Mining" addresses many of the rock mechanics issues that arise in underground mining engineering, it is not a text exclusively for mining applications. Based on extensive professional research and teaching experience, this book will provide an authoratative and comprehensive text for final year undergraduates and commencing postgraduate stydents. For profesional practitioners, not only will it be of interests to mining and geological engineers, but also to civil engineers, structural mining geologists and geophysicists as a standard work for professional reference purposes.
Download or read book Underground Mining Methods and Technology written by A.B. Szwilski and published by Elsevier. This book was released on 2012-12-02 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains high-quality papers from the principal mining research institutes of the USA, United Kingdom, India and South Africa, thus providing up-to-date coverage of underground mining and technology in the main mining areas of the world. The theme is mining in adverse conditions using state-of-the-art technology. A wide range of problems facing mining engineers is discussed, namely: thick seam working, mining under massive beds, highly productive room and pillar operations, water problems, ventilation, and electronics in longwall mining.
Download or read book Computer Applications in the Mineral Industries written by Heping Xie and published by CRC Press. This book was released on 2020-12-17 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers the use of computer applications in the mineral industries, encompassing topics such as the use of computer visualization in mining systems and aspects such as ventilation and safety.
Download or read book Ground Engineering Principles and Practices for Underground Coal Mining written by J.M. Galvin and published by Springer. This book was released on 2016-02-02 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches readers ground engineering principles and related mining and risk management practices associated with underground coal mining. It establishes the basic elements of risk management and the fundamental principles of ground behaviour and then applies these to the essential building blocks of any underground coal mining system, comprising excavations, pillars, and interactions between workings. Readers will also learn about types of ground support and reinforcement systems and their operating mechanisms. These elements provide the platform whereby the principles can be applied to mining practice and risk management, directed primarily to bord and pillar mining, pillar extraction, longwall mining, sub-surface and surface subsidence, and operational hazards. The text concludes by presenting the framework of risk-based ground control management systems for achieving safe workplaces and efficient mining operations. In addition, a comprehensive reference list provides additional sources of information on the subject. Throughout, a large variety of examples show good and bad mining situations in order to demonstrate the application, or absence, of the established principles in practice. Written by an expert in underground coal mining and risk management, this book will help students and practitioners gain a deep understanding of the basic principles behind designing and conducting mining operations that are safe, efficient, and economically viable. Provides a comprehensive coverage of ground engineering principles within a risk management framework Features a large variety of examples that show good and poor mining situations in order to demonstrate the application of the established principles in practice Ideal for students and practitioners About the author Emeritus Professor Jim Galvin has a relatively unique combination of industrial, research and academic experience in the mining industry that spans specialist research and applied knowledge in ground engineering, mine management and risk management. His career encompasses directing ground engineering research groups in South Africa and Australia; practical mining experience, including active participation in the mines rescue service and responsibility for the design, operation, and management of large underground coal mines and for the consequences of loss of ground control as a mine manager; appointments as Professor and Head of the School of Mining Engineering at the University of New South Wales; and safety advisor to a number of Boards of Directors of organisations associated with mining. Awards Winner of the ACARP Excellence Research Award 2016. The Australian Coal Industry's Research Program selects recipients to receive ACARP Research and Industry Excellence Awards every two years. The recipients are selected on the recommendation of technical committees. They are honored for achievement of a considerable advance in an area of importance to the Australian coal mining industry. An important criterion is the likelihood of the results from the project being applied in mines. Winner of the Merv Harris Award from the Mine Managers Association of Australia. The Merv Harris Award is named for Merv Harris who donated money to be invested for a continuing award in 1988. With the award, the Mine Managers Association of Australia honors members of the Association who demonstrate technical achievement in the Australian Coal Mining Industry. The first award was granted in 1990, since then, only two people have received this honor. The book has received the following awards.... AGS (Australian Geomechanics Society) congratulates Dr Galvin for these awards
Download or read book Mine Design Planning and Sustainable Exploitation in the Digital Age written by A.J.S. (Sam) Spearing and published by CRC Press. This book was released on 2022-09-19 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mine Design, Planning and Sustainable Exploitation in the Digital Age covers mine planning, design and exploitation taking cognizance of new developments, especially those associated with the Fourth Industrial Revolution and the positive influence that it has, and will have, on the mining industry. It refers to latest best practices with emphasis on the social license to operate and sustainable (green) mining. The book covers surface and underground mining in some detail and addresses relevant associated aspects such as risk management, green mining and the importance of real community relations. It is organized as follows: Surface Mining Underground Soft Rock Mining Underground Hard Rock (Metal/Non-metal) Mining Green and Sustainable Mining It has many relevant photos and figures that help the reader and includes appropriate support design and types commonly used in the various mining methods. Mine Design, Planning and Sustainable Exploitation in the Digital Age is mainly aimed at mining, geological engineering and other undergraduate and postgraduates interested in the mining resources industry. It will also serve as a useful reference book for practitioners in the mining industry who want an easy-to-use book.
Download or read book Introductory Mining Engineering written by Howard L. Hartman and published by John Wiley & Sons. This book was released on 2002-08-09 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory text and reference on mining engineering highlighting the latest in mining technology Introductory Mining Engineering outlines the role of the mining engineer throughout the life of a mine, including prospecting for the deposit, determining the site's value, developing the mine, extracting the mineral values, and reclaiming the land afterward. This Second Edition is written with a focus on sustainability-managing land to meet the economic and environmental needs of the present while enhancing its ability to also meet the needs of future generations. Coverage includes aboveground and underground methods of mining for a wide range of substances, including metals, nonmetals, and fuels. Completely up to date, this book presents the latest information on such technologies as remote sensing, GPS, geophysical surveying, and mineral deposit evaluation, as well as continuous integrated mining operations and autonomous trucks. Also included is new information on landscape restoration, regional planning, wetlands protection, subsidence mitigation, and much more. New chapters include coverage of: * Environmental responsibilities * Regulations * Health and safety issues Generously supplemented with more than 200 photographs, drawings, and tables, Introductory Mining Engineering, Second Edition is an indispensable book for mining engineering students and a comprehensive reference for professionals.
Download or read book Support of Underground Excavations in Hard Rock written by E. Hoek and published by CRC Press. This book was released on 2000-01-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and economical construction of tunnels, mines, and other subterranean works depends on the correct choice of support systems to ensure that the excavations are stable. These support systems should be matched to the characterstics of the rock mass and the excavation techniques adopted. Establishing the support requirements, designing support systems and installing these correctly are essential elements in safe underground construction. This is a comprehensive and practical work which also gives access to user-friendly computer programmes which enable the investigation and design of support techniques. Details on how to obtain this software are also included in the book.
Download or read book Underground Production Methods in Mining Engineering written by Prof. Dr. Bilal Semih Bozdemir and published by Prof. Dr. Bilal Semih Bozdemir. This book was released on with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground Production Methods in Mining Engineering Introduction to Underground Mining Advantages of Underground Mining Challenges of Underground Mining Shaft Mining Drift Mining Slope Mining Room-and-Pillar Mining Longwall Mining Safety Considerations in Underground Mining Ventilation Systems in Underground Mines Ground Support Techniques Drilling and Blasting Techniques Transportation Systems in Underground Mines Automation and Robotics in Underground Mining
Download or read book The New Encyclopaedia Britannica written by and published by . This book was released on 1997 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Techniques in Underground Mining written by Richard E. Gertsch and published by Society for Mining Metallurgy. This book was released on 1998 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 800+ page book contains a wealth of information for mining students and industry professionals. It consists of selected material from the out-of-print industry standard, Underground Mining Methods Handbook. More than 40 chapters covering such underground mining topics as sampling, planning, reserve analysis, cost calculations, various methods of support, block and panel caving, and sublevel caving make up this comprehensive text. Numerous tables and figures enhance the extensive material found in each chapter. An excellent teaching tool and source book, Techniques in Underground Mining is a must for any mining student or engineer.
