Download or read book Guide to Materials Selection and Corrosion Control for Subsea Energy Equipment written by and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guidelines for Materials Selection and Corrosion Control for Subsea Oil and Gas Production Equipment written by and published by . This book was released on 1999 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Protection for the Oil and Gas Industry written by Mavis Sika Okyere and published by CRC Press. This book was released on 2019-02-14 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Protection for the Oil and Gas Industry: Pipelines, Subsea Equipment, and Structures summarizes the main causes of corrosion and requirements for materials protection, selection of corrosion-resistant materials and coating materials commonly used for corrosion protection, and the limitations to their use, application, and repair. This book focuses on the protection of steels against corrosion in an aqueous environment, either immersed in seawater or buried. It also includes guidelines for the design of cathodic protection systems and reviews of cathodic protection methods, materials, installation, and monitoring. It is concerned primarily with the external and internal corrosion protection of onshore pipelines and subsea pipelines, but reference is also made to the protection of other equipment, subsea structures, risers, and shore approaches. Two case studies, design examples, and the author’s own experiences as a pipeline integrity engineer are featured in this book. Readers will develop a high quality and in-depth understanding of the corrosion protection methods available and apply them to solve corrosion engineering problems. This book is aimed at students, practicing engineers, and scientists as an introduction to corrosion protection for the oil and gas industry, as well as to overcoming corrosion issues.

Download or read book Corrosion and Materials Selection written by Alireza Bahadori and published by John Wiley & Sons. This book was released on 2014-08-11 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum and chemical industries contain a wide variety of corrosive environments, many of which are unique to these industries. Oil and gas production operations consume a tremendous amount of iron and steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost of corrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs – natural resources, potential hazards, and lost opportunity. Wasting natural resources is a direct contradiction to the growing need for sustainable development. By selecting the correct material and applying proper corrosion protection methods, these costs can be reduced, or even eliminated. This book provides a minimum design requirement for consideration when designing systems in order to prevent or control corrosion damage safely and economically, and addresses: • Corrosion problems in petroleum and chemical industries • Requirements for corrosion control • Chemical control of corrosive environments • Corrosion inhibitors in refineries and petrochemical plants • Materials selection and service life of materials • Surface preparation, protection and maintainability • Corrosion monitoring - plant inspection techniques and laboratory corrosion testing techniques Intended for engineers and industry personnel working in the petroleum and chemical industries, this book is also a valuable resource for research and development teams, safety engineers, corrosion specialists and researchers in chemical engineering, engineering and materials science.

Download or read book Corrosion Control for Offshore Structures written by Ramesh Singh and published by Gulf Professional Publishing. This book was released on 2014-08-12 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable game changer for those companies operating in hostile, corrosive marine environments, Corrosion Control for Offshore Structures provides critical corrosion control tips and techniques that will prolong structural life while saving millions in cost. In this book, Ramesh Singh explains the ABCs of prolonging structural life of platforms and pipelines while reducing cost and decreasing the risk of failure. Corrosion Control for Offshore Structures places major emphasis on the popular use of cathodic protection (CP) combined with high efficiency coating to prevent subsea corrosion. This reference begins with the fundamental science of corrosion and structures and then moves on to cover more advanced topics such as cathodic protection, coating as corrosion prevention using mill applied coatings, field applications, and the advantages and limitations of some common coating systems. In addition, the author provides expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard and Test Methods. Packed with tables, charts and case studies, Corrosion Control for Offshore Structures is a valuable guide to offshore corrosion control both in terms of its theory and application. Prolong the structural life of your offshore platforms and pipelines Understand critical topics such as cathodic protection and coating as corrosion prevention with mill applied coatings Gain expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard Test Methods.

Download or read book Corrosion Control in Petroleum Production Third Edition written by Robert J Franco and published by . This book was released on 2020-09-09 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This greatly updated and expanded third edition of Corrosion Control in Petroleum Production is written for non-experts who have the responsibility for corrosion management of subsurface, surface, and subsea equipment used for producing and processing oil and natural gas. It provides an overview and reference on the different corrosion threats, the methods for controlling corrosion, and the establishment of a management system based on risk and continuous improvement. The authors, Robert Franco and Tim Bieri, have distilled 80 years of personal experience--as well as the experience from multiple reviewers and contributors--into one comprehensive reference. Included are hundreds of photographs, figures, and tables to illustrate the practical aspects and essential theory of corrosion control and materials selection.

Download or read book Corrosion and Materials Selection written by Alireza Bahadori and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum and chemical industries contain a wide variety of corrosive environments, many of whichare unique to these industries. Oil and gas production operations consume a tremendous amount of ironand steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost ofcorrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs ' natural resources, potential hazards, and lost opportunity. Wasting natural resources is a direct contradiction to the growing need for sustainable development. By selecting the correct material and applying proper corrosion protection methods, these costs can bereduced, or even eliminated. This book provides a minimum design requirement for consideration whendesigning systems in order to prevent or control corrosion damage safely and economically, and addresses: Corrosion problems in petroleum and chemical industriesRequirements for corrosion controlChemical control of corrosive environmentsCorrosion inhibitors in refineries and petrochemical plantsMaterials selection and service life of materialsSurface preparation, protection and maintainabilityCorrosion monitoring - plant inspection techniques and laboratory corrosion testing techniques Intended for engineers and industry personnel working in the petroleum and chemical industries, this book is also a valuable resource for research and development teams, safety engineers, corrosion specialists and researchers in chemical engineering, engineering and materials science.

Download or read book Transmission Distribution and Renewable Energy Generation Power Equipment written by Bella H. Chudnovsky and published by CRC Press. This book was released on 2017-03-07 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised edition presents, extends, and updates a thorough analysis of the factors that cause and accelerate the aging of conductive and insulating materials of which transmission and distribution electrical apparatus is made. New sections in the second edition summarize the issues of the aging, reliability, and safety of electrical apparatus, as well as supporting equipment in the field of generating renewable energy (solar, wind, tide, and wave power). When exposed to atmospheric corrosive gases and fluids, contaminants, high and low temperatures, vibrations, and other internal and external impacts, these systems deteriorate; eventually the ability of the apparatus to function properly is destroyed. In the modern world of "green energy", the equipment providing clean, electrical energy needs to be properly maintained in order to prevent premature failure. The book’s purpose is to help find the proper ways to slow down the aging of electrical apparatus, improve its performance, and extend the life of power generation, transmission, and distribution equipment.

Download or read book Materials Performance written by and published by . This book was released on 1999-07 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fossil Energy Update written by and published by . This book was released on 1976 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Practitioner s Handbook for Potentially Explosive Atmospheres written by and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Control for Offshore Structures written by Ramesh Singh and published by . This book was released on 2014 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable game changer for those companies operating in hostile, corrosive marine environments, Corrosion Control for Offshore Structures provides critical corrosion control tips and techniques that will prolong structural life while saving millions in cost. In this book, Ramesh Singh explains the ABCs of prolonging structural life of platforms and pipelines while reducing cost and decreasing the risk of failure. Corrosion Control for Offshore Structures places major emphasis on the popular use of cathodic protection (CP) combined with high efficiency coating to prevent subsea corrosion. This reference begins with the fundamental science of corrosion and structures and then moves on to cover more advanced topics such as cathodic protection, coating as corrosion prevention using mill applied coatings, field applications, and the advantages and limitations of some common coating systems. In addition, the author provides expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard and Test Methods. Packed with tables, charts and case studies, Corrosion Control for Offshore Structures is a valuable guide to offshore corrosion control both in terms of its theory and application. Prolong the structural life of your offshore platforms and pipelines Understand critical topics such as cathodic protection and coating as corrosion prevention with mill applied coatings Gain expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard Test Methods.

Download or read book Petroleum Abstracts Literature and Patents written by and published by . This book was released on 1990 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermally Sprayed Metal Coatings to Protect Steel Pilings written by James A. Ellor and published by Transportation Research Board. This book was released on 2004 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Research sponsored by the American Association of State Highway and Transportation Officials in cooperation with the Federal Highway Administration."

Download or read book Subsea Valves and Actuators for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-05-29 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and valve engineers rely on common industrial standards for selecting and maintaining valves, but these standards are not specific to the subsea oil and gas industry. Subsea Valves and Actuators for the Oil and Gas Industry delivers a needed reference to go beyond the standard to specify how to select, test, and maintain the right subsea oil and gas valve for the project. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection, helping guide the engineer to the most efficient valve. Covering subsea-specific protection, the reference also gives information on high pressure protection systems (HIPPS) and discusses corrosion management within the subsea sector, such as Hydrogen Induced Stress Cracking Corrosion (HISC). Additional benefits include understanding the concept of different safety valves in subsea, selecting different valves and actuators located on subsea structures such as Christmas trees, manifolds, and HIPPS modules, with a full detail review including sensors, logic solver, and solenoid which is designed to save cost and improve the reliability in the subsea system. Rounding out with chapters on factory acceptance testing (FAT) and High Integrity Pressure Protection Systems (HIPPS), Subsea Valves and Actuators for the Oil and Gas Industry gives subsea engineers and managers a much-needed tool to better understand today’s subsea technology. Understand practical information about all types of subsea valves and actuators with over 600 visuals and several case studies Learn and review the applicable standards and specifications from API and ISO in one convenient location Protect your assets with a high-pressure protection system (HIPPS) and subsea-specific corrosion management including Hydrogen Induced Stress Cracking Corrosion (HISC)

Download or read book Official Reference Book and Buyers Guide written by and published by . This book was released on 1986 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Petroleum Abstracts written by and published by . This book was released on 1995 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: