Download or read book Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Existing Structures written by Consiglio nazionale delle ricerche and published by . This book was released on 2006 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures written by ACI Committee 440 and published by . This book was released on 2002 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recommended Guide Specification for the Design of Externally Bonded FRP Systems for Repair and Strengthening of Concrete Bridge Elements written by Abdul-Hamid Zureick and published by Transportation Research Board. This book was released on 2009 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 655: Recommended Guide Specification for the Design of Externally Bonded FRP Systems for Repair and Strengthening of Concrete Bridge Elements examines a recommended guide specification for the design of externally bonded Fiber-Reinforced Polymer (FRP) systems for the repair and strengthening of concrete bridge elements. The report addresses the design requirements for members subjected to different loading conditions including flexure, shear and torsion, and combined axial force and flexure. The recommended guide specification is supplemented by design examples to illustrate its use for different FRP strengthening applications.

Download or read book ACI 440 2R 17 Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures written by ACI Committee 440 and published by . This book was released on 2017-04-27 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guide for the Design and Construction of Externally Bonded Fiber Reinforced Polymer Systems for Strengthening Unreinforced Masonry Structures written by ACI Committee 440 and published by . This book was released on 2010-04-13 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ACI PRC 440 2 23 written by and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Retrofitting of Concrete Structures by Externally Bonded FRPs With Emphasis on Seismic Applications written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2006-01-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 35 is the first bulletin to publish documentation from an fib short course. These courses are held worldwide and cover advanced knowledge of structural concrete in general, or specific topics. They are organized by fib and given by internationally recognized experts in fib, often supplemented with local experts active in fib. They are based on the knowledge and expertise from fib's ten Commissions and nearly fifty Task Groups. fib Bulletin 35 presents the course materials developed for the short course "Retrofitting of Concrete Structures through Externally Bonded FRP, with emphasis on Seismic Applications", given in Ankara and Istanbul in June 2005. The course drew on expertise both from outside Turkey and from the large pool of local experts on this subject. In most countries of the world, the building stock is ageing and needs continuous maintenance or repair. Moreover, the majority of existing constructions are deficient in the light of current knowledge and design codes. The problem of structural deficiency of existing constructions is especially acute in seismic regions, as, even there, seismic design of structures is relatively recent. The direct and indirect costs of demolition and reconstruction of structurally deficient constructions are often prohibitive; furthermore they entail a substantial waste of natural resources and energy. Therefore, structural retrofitting is becoming increasingly widespread throughout the world. Externally bonded Fibre Reinforced Polymers (FRPs) are rapidly becoming the technique of choice for structural retrofitting. They are cleaner and easier to apply than conventional retrofitting techniques, reduce disruption to the occupancy and operation of the facility, do not generate debris or waste, and reduce health and accident hazards at the construction site as well as noise and air pollution in the surroundings. fib Bulletin 35 gives state-of-the-art coverage of retrofitting through FRPs and presents relevant provisions from three recent standardisation milestones: EN 1998-3:2005 "Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings", the 2005 Draft of the Turkish seismic design code, and the Italian regulatory document CNR-DT 200/04, "Instructions for Design, Execution and Control of Strengthening Interventions by Means of Fibre-Reinforced Composites" (2004).

Download or read book Externally Bonded FRP Reinforcement for RC Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2001-01-01 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: In December 1996, the then CEB established a Task Group with the main objective to elaborate design guidelines for the use of FRP reinforcement in accordance with the design format of the CEB-FIP Model Code and Eurocode2. With the merger of CEB and FIP into fib in 1998, this Task Group became fib TG 9.3 FRP Reinforcement for concrete structures in Commission 9 Reinforcing and Prestressing Materials and Systems. The Task Group consists of about 60 members, representing most European universities, research institutes and industrial companies working in the field of advanced composite reinforcement for concrete structures, as well as corresponding members from Canada, Japan and USA. Meetings are held twice a year and on the research level its work is supported by the EU TMR (European Union Training and Mobility of Researchers) Network "ConFibreCrete”. The work of fib TG 9.3 is performed by five working parties (WP): Material Testing and Characterization (MT&C) Reinforced Concrete (RC) Prestressed Concrete (PC) Externally Bonded Reinforcement (EBR) Marketing and Applications (M&A) This technical report constitutes the work conducted as of to date by the EBR party. This bulletin gives detailed design guidelines on the use of FRP EBR, the practical execution and the quality control, based on the current expertise and state-of-the-art knowledge of the task group members. It is regarded as a progress report since it is not the aim of this report to cover all aspects of RC strengthening with composites. Instead, it focuses on those aspects that form the majority of the design problems. several of the topics presented are subject of ongoing research and development, and the details of some modelling approaches may be subject to future revisions. as knowledge in this field is advancing rapidly, the work of the EBR WP will continue. Inspite of this limit in scope, considerable effort has been made to present a bulletin that is today’s state-of-art in the area of strengthening of concrete structures by means of externally bonded FRP reinforcement.

Download or read book Externally applied FRP reinforcement for concrete structures written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2019-05-01 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: In December 1996, CEB established a Task Group with the main objective to elaborate design guidelines for the use of FRP reinforcement in accordance with the design format of the CEB-FIP Model Code and Eurocode2. With the merger of CEB and FIP into fib in June 1998, this Task Group became fib TG 9.3 FRP Reinforcement for concrete structures in Commission 9 Reinforcing and Prestressing Materials and Systems. Finally, as a result of the restructuring of fib’s Commissions and Task Groups at the end of 2014, the Task Group became fib T5.1 FRP Reinforcement for concrete structures, chaired by Stijn Matthys at Ghent University, in Commission 5 Reinforcements. The work of former TG 9.3 and current T5.1 was performed by two working parties (WP), one of which is “Externally Applied Reinforcement” (EAR), which produced fib bulletin 14 “Externally bonded FRP reinforcement for RC structures” in July 2001. Following a number of years of relatively slow activity, the WP on externally applied reinforcement was reactivated and started working on an update of bulletin 14. The result of this work is summarised in the present technical report, which aims to give design guidelines on the use of externally applied FRP reinforcement (both externally bonded and near-surface mounted) for concrete structures. An attempt has been made to present some of the topics in a Eurocode-compatible format, so that the material covered may form the basis for the introduction of composites in the next version of Eurocode 2 and for the updating of the text on seismic retrofitting with composites in the next version of Eurocode 8. All persons who participated in the preparation of this Bulletin are mentioned in the copyright page. Further acknowledgements are due to Josée Bastien (Canada), Hans Rudolf Ganz (Switzerland) and Luc Taerwe (Belgium) for revision of the document. To all members of the working party on externally applied reinforcement our sincere thanks are expressed for the high quality and extensive work brought in on a voluntary basis.

Download or read book Guide Specifications for Design of Bonded FRP Systems for Repair and Strengthening of Concrete Bridge Elements written by and published by . This book was released on 2012 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt: These guide specifications are intended for the repair and strengthening of reinforced and pre-stressed highway bridge structures using externally bonded fiber-reinforced polymer (FRP) composite systems. They supplement the AASHTO LRFD Bridge Design Specifications.

Download or read book Design Procedures for the Use of Composites in Strengthening of Reinforced Concrete Structures written by Carlo Pellegrino and published by Springer. This book was released on 2015-08-25 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyses the current knowledge on structural behaviour of RC elements and structures strengthened with composite materials (experimental, analytical and numerical approaches for EBR and NSM), particularly in relation to the above topics, and the comparison of the predictions of the current available codes/recommendations/guidelines with selected experimental results. The book shows possible critical issues (discrepancies, lacunae, relevant parameters, test procedures, etc.) related to current code predictions or to evaluate their reliability, in order to develop more uniform methods and basic rules for design and control of FRP strengthened RC structures. General problems/critical issues are clarified on the basis of the actual experiences, detect discrepancies in existing codes, lacunae in knowledge and, concerning these identified subjects, provide proposals for improvements. The book will help to contribute to promote and consolidate a more qualified and conscious approach towards rehabilitation and strengthening existing RC structures with composites and their possible monitoring.

Download or read book Guide Specifications for Design of Bonded FRP Systems for Repair and Strengthening of Concrete Bridge Elements written by American Association of State Highway and Transportation Officials and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "These guide specifications are intended for use in the repair and strengthening of reinforced and prestressed concrete highway bridge elements using externally bonded fiber-reinforced polymer (FRP) composite systems. The guide specifications have been updated to better align with ACI 440 strain approaches, and major updates include the following: flanged sections in flexure, prestressed concrete sections, inclusion of factors to account for environmental exposure conditions, near surface mounted (NSM) FRP designs, design of end anchors, detailing of laps and splices, updated approach to FRP concrete interface strain, and inclusion of design examples for shear and flexural strengthening, and confinement. These updated guide specifications also contain detailed design examples, reflecting the latest research and lessons learned from actual field deployments."--Publisher website

Download or read book Seismic Strengthening of Concrete Buildings Using FRP Composites written by and published by American Concrete Institute. This book was released on 2008 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This CD-ROM consists of eight papers that were presented by ACI Committee 440 at the Spring Convention in Atlanta, GA, in April 2007"--Site Web de l'éditeur

Download or read book FRP written by J. G. Teng and published by John Wiley & Sons. This book was released on 2002 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre-reinforced polymer (FRP) composites are used to strengthen reinforced concrete (RC) structures. A large amount of research now exists on this. This book brings together all existing research into one volume.

Download or read book Strengthening of Reinforced Concrete Structures written by Len C. Hollaway and published by CRC Press. This book was released on 1999-04-09 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The in situ rehabilitation or upgrading of reinforced concrete members using bonded steel plates is an effective, convenient, and economic method of improving structural performance. However, disadvantages inherent in the use of steel have stimulated research into using fiber reinforced polymer (FRP) material in its place, with the goal of providing a non-corrosive, more versatile strengthening system. Strengthening of Reinforced Concrete Structures presents a detailed study of the flexural strengthening of reinforced and prestressed concrete members using FRP composite plates. This book covers short and long term performance through model and full-scale experimental testing plus theoretical and numerical considerations. It discusses previous investigative and site work undertaken to strengthen concrete beams using steel bonded pates and the pros and cons of using the steel and composite plate materials. It also presents case histories of construction members upgraded or strengthened using carbon fibre/polymer matrix composite materials bonded to the structural unit. A consortium of academic and industrial researchers provided much of the data and contributed the chapters to this volume. The research and trial tests were undertaken as part of the United Kingdom's ROBUST project. Strengthening of Reinforced Concrete Structures serves to disseminate the large amount of information that resulted from these studies. As detailed in this book, their results will serve to help generate and formulate design specifications as engineers continue to apply these important techniques to an ever-widening range of applications.

Download or read book Strengthening and Rehabilitation of Civil Infrastructures Using Fibre Reinforced Polymer FRP Composites written by L C Hollaway and published by Elsevier. This book was released on 2008-07-18 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The repair of deteriorated, damaged and substandard civil infrastructures has become one of the most important issues for the civil engineer worldwide. This important book discusses the use of externally-bonded fibre-reinforced polymer (FRP) composites to strengthen, rehabilitate and retrofit civil engineering structures, covering such aspects as material behaviour, structural design and quality assurance. The first three chapters of the book review structurally-deficient civil engineering infrastructure, including concrete, metallic, masonry and timber structures. FRP composites used in rehabilitation and surface preparation of the component materials are also reviewed. The next four chapters deal with the design of FRP systems for the flexural and shear strengthening of reinforced concrete (RC) beams and the strengthening of RC columns. The following two chapters examine the strengthening of metallic and masonry structures with FRP composites. The last four chapters of the book are devoted to practical considerations in the flexural strengthening of beams with unstressed and prestressed FRP plates, durability of externally bonded FRP composite systems, quality assurance and control, maintenance, repair, and case studies. With its distinguished editors and international team of contributors, Strengthening and rehabilitation of civil infrastructures using fibre-reinforced polymer (FRP) composites is a valuable reference guide for engineers, scientists and technical personnel in civil and structural engineering working on the rehabilitation and strengthening of the civil infrastructure. Reviews the use of fibre-reinforced polymer (FRP) composites in structurally damaged and sub-standard civil engineering structures Examines the role and benefits of fibre-reinforced polymer (FRP) composites in different types of structures such as masonry and metallic strengthening Covers practical considerations including material behaviour, structural design and quality assurance

Download or read book The International Handbook of FRP Composites in Civil Engineering written by Manoochehr Zoghi and published by CRC Press. This book was released on 2013-09-26 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber-reinforced polymer (FRP) composites have become an integral part of the construction industry because of their versatility, enhanced durability and resistance to fatigue and corrosion, high strength-to-weight ratio, accelerated construction, and lower maintenance and life-cycle costs. Advanced FRP composite materials are also emerging for a w