Download or read book Guide for In Place Treatment of Wood in Historic Covered and Modern Bridges written by Stan Lebow and published by CreateSpace. This book was released on 2012-10-22 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Historic covered bridges and current timber bridges can be vulnerable to damage from biodeterioration or fire. This guide describes procedures for selecting and applying inplace treatments to prevent or arrest these forms of degradation. Vulnerable areas for biodeterioration in covered bridges include members contacting abutments, members near the ends of bridges subject to wetting from splashing and members below windows or other openings that allow entry of wind-blown precipitation. Pressure-treated timber bridge members can be vulnerable when untreated wood is exposed by field fabrication or by the development of drying checks. The objective of an in-place preservative treatment is to distribute preservative into areas of a structure that are vulnerable to moisture accumulation and/or not protected by the original pressure treatment. Types of field treatments range from finishes, to boron rods or pastes, to fumigants. A limitation of in-place treatments is that they cannot be forced deeply into the wood as is done in pressure-treatment processes. However, some can be applied into the center of large members via treatment holes. These preservatives may be available as liquids, rods or pastes. Bridge members can be treated with fire retardants to delay ignition, reduce heat release, and slow the spread of flames. In-place coating products are available to reduce surface flammability, but these coatings may need to be reapplied on a regular basis if exposed to weathering. For more integrated protection, fire retardant treatment of bridge members may be combined with other forms of protection such as lights, alarms, sprinklers and monitoring systems.
Download or read book Guide for In place Treatment of Wood in Historic Covered and Modern Bridges written by and published by . This book was released on 2012 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: Historic covered bridges and current timber bridges can be vulnerable to damage from biodeterioration or fire. This guide describes procedures for selecting and applying in-place treatments to prevent or arrest these forms of degradation. Vulnerable areas for biodeterioration in covered bridges include members contacting abutments, members near the ends of bridges subject to wetting from splashing and members below windows or other openings that allow entry of wind-blown precipitation. Pressure-treated timber bridge members can be vulnerable when untreated wood is exposed by field fabrication or by the development of drying checks. The objective of an in-place preservative treatment is to distribute preservative into areas of a structure that are vulnerable to moisture accumulation and/or not protected by the original pressure treatment. Types of field treatments range from finishes, to boron rods or pastes, to fumigants. A limitation of in-place treatments is that they cannot be forced deeply into the wood as is done in pressure-treatment processes. However, some can be applied into the center of large members via treatment holes. These preservatives may be available as liquids, rods or pastes. Bridge members can be treated with fire retardants to delay ignition, reduce heat release, and slow the spread of flames. In-place coating products are available to reduce surface flammability, but these coatings may need to be reapplied on a regular basis if exposed to weathering. For more integrated protection, fire retardant treatment of bridge members may be combined with other forms of protection such as lights, alarms, sprinklers and monitoring systems.
Download or read book Guide for Use of Wood Preservatives in Historic Structures written by Stan LeBow and published by Government Printing Office. This book was released on 2012-12-13 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: NOTE: NO FURTHER DISCOUNT FOR THIS PRINT PRODUCT-- OVERSTOCK SALE -- Significantly reduced list price Wood preservatives are generally grouped into two categories: preservatives used for in-place field (remedial)treatment and preservatives used for pressure treatments.A limitation of in-place treatments is that they cannot beforced deeply into the wood under pressure. However, theycan be applied into the center of large wooden membersvia treatment holes. These preservatives may be availableas liquids, rods, or pastes. Pressure-treated wood has muchdeeper and more uniform preservative penetration thanwood treated with other methods. The type of pressuretreated wood is often dependent on the requirements of thespecific application. To guide selection of pressure-treatedwood, the American Wood Protection Association developedUse Category System standards. Other preservative characteristics, such as color, odor, and surface oiliness may alsobe relevant. Guidelines for selection and application of fieldtreatments and for selection and specification of pressure-treated wood are provided in this document. Related Products: Nondestructive Evaluation of Wood is available here: https: //bookstore.gpo.gov/products/sku/001-001-00704-8 New Exterior Additions to Historic Buildings: Preservation Concerns is available here: https: //bookstore.gpo.gov/products/sku/024-005-01280-0 Guide for In-Place Treatment of Wood in Historic Covered and Modern Bridges is available here: https: //bookstore.gpo.gov/products/sku/001-001-00695-5 Preserving Historic Wood Porches is available here: https: //bookstore.gpo.gov/products/sku/024-005-01240-1 Preservation Briefs: Recognizing and Resolving Common Preservation Problems, 1-14 is available here: https: //bookstore.gpo.gov/products/sku/024-005-01026-2 Preservation Briefs: 15-23 (2007) is avaiable here: https: //bookstore.gpo.gov/products/sku/024-005-01256-7 Preservation Briefs 24-34: Recognizing and Resolving Common Preservation and Repair Problems Prior to Working on Historic Buildings is available here: https: //bookstore.gpo.gov/products/sku/024-005-01147-1 Preservation Briefs 35-42: Recognizing and Resolving Common Preservation and Repair Problems Prior to Working on Historic Buildings is available here: https: //bookstore.gpo.gov/products/sku/024-005-01219-2 Renovation & Historic Preservation resources collection can be found here: https: //bookstore.gpo.gov/catalog/science-technology/construction-archit"
Download or read book Guidelines to Restoring Structural Integrity of Covered Bridge Members written by Ronald W. Anthony and published by Government Printing Office. This book was released on 2018-04-02 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: These guidelines are designed for decision makers (selection, country commissioners, city planners, preservation officers, contractors, rehabilitation engineers, etc.) to understand the components that are used to make effective decisions about how and when to repair a covered bridge, such as structural integrity, engineering analyses, condition assessments, how to support the bridge during repairs, and more. There are numerous types of covered bridges and ensuring public safety during repairs is a paramount issue for future generations to enjoy. Related products: Find more Renovation & Historic Preservation resources here: https: //bookstore.gpo.gov/catalog/renovation-historic-preservation Bridges & Tunnels resources collection here: https: //bookstore.gpo.gov/catalog/bridges-tunnels Other products published by the U.S. Forest Service are available here: https: //bookstore.gpo.gov/agency/us-forest-service
Download or read book Guidelines to Restoring Structural Integrity of Covered Bridge Members written by Ronald W. Anthony and published by Government Printing Office. This book was released on 2018-04-02 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: These guidelines are designed for decision makers (selection, country commissioners, city planners, preservation officers, contractors, rehabilitation engineers, etc.) to understand the components that are used to make effective decisions about how and when to repair a covered bridge, such as structural integrity, engineering analyses, condition assessments, how to support the bridge during repairs, and more. There are numerous types of covered bridges and ensuring public safety during repairs is a paramount issue for future generations to enjoy. Related products: Find more Renovation & Historic Preservation resources here: https: //bookstore.gpo.gov/catalog/renovation-historic-preservation Bridges & Tunnels resources collection here: https: //bookstore.gpo.gov/catalog/bridges-tunnels Other products published by the U.S. Forest Service are available here: https: //bookstore.gpo.gov/agency/us-forest-service
Download or read book Covered Bridge Manual written by Phillip C. Pierce and published by . This book was released on 2005 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Species Identification and Design Value Estimation of Wooden Members in Covered Bridges written by Alex C. Wiedenhoeft and published by CreateSpace. This book was released on 2015-06-26 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covered timber bridges are historic structures with unique aesthetic value. To preserve this value and maintain bridges in service, robust evaluation of their performance and safety is necessary. The strength of the timber found in covered bridges can vary considerably, not only because of age and condition, but also because of species and grade. For the practicing engineer or inspector evaluating a covered bridge, design values for existing wood members must be determined with as much accuracy as possible by account-ing for bridge-specific conditions. The current practice is to assign wood values for strength and moduli from existing specifications without specific reference to timber species, condition, or grade, which can result in an inaccurate assess-ment of the structure. This manual provides a walk-through for basic wood identification, inspection, condition assess-ment, field grading, and design value estimation for wood in covered bridges.
Download or read book Crossings written by and published by . This book was released on 1999 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Focus written by and published by . This book was released on 2010 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Timber Bridges written by Michael A. Ritter and published by . This book was released on 1990 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a comprehensive analysis of the design, construction, inspection, and maintenance of timber bridges.
Download or read book American Wooden Bridges written by American Society of Civil Engineers. Committee on History and Heritage of American Civil Engineering and published by . This book was released on 1976 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood in Transportation Publications List written by Wood in Transportation National Information Center and published by . This book was released on 1997 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book America s Bridges written by Evan N. Kantwell and published by Nova Publishers. This book was released on 2008 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Has anyone actually seen a bridge being built in America? This editor has travelled for almost 40 years in America without seeing a single one being constructed -- and few even being repaired. Some critics point out that America has built excellent bridges in Vietnam and Iraq which indicates that the knowledge base remains intact. Others say that individual states cannot feed their armies of bureaucrats and fund their plush pensions and health care programs and still expect to build bridges. And the federal government cannot be counted on for much of anything useful. This book presents recent reports focusing on this part of America's crumbling infrastructure.
Download or read book Timber Bridges written by Michael A. Ritter and published by Datamotion Publishing LLC. This book was released on 1990 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a comprehensive analysis of the design, construction, inspection, and maintenance of timber bridges.
Download or read book World Guide to Covered Bridges written by David Warren Wright and published by . This book was released on 2009 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Listing of covered wood truss bridges throughout the world with descriptions and directions to locate each bridge.
Download or read book Timber Bridges written by Michael A. Ritter and published by . This book was released on 2005 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber's strength, light weight, and energy-absorbing properties furnish features desirable for bridge construction. Timber is capable of supporting short-term overloads without adverse effects. Contrary to popular belief, large wood members provide good fire resistance qualities that meet or exceed those of other materials in severe fire exposures. From an economic standpoint, wood is competitive with other materials on a first-cost basis and shows advantages when life cycle costs are compared. Timber bridges can be constructed in virtually any weather conditions, without detriment to the material. Wood is not damaged by continuous freezing and thawing and resists harmful effects of de-icing agents, which cause deterioration in other bridge materials. Timber bridges do not require special equipment for installation and can normally be constructed without highly skilled labor. They also present a natural and aesthetically pleasing appearance, particularly in natural surroundings. The misconception that wood provides a short service life has plagued timber as a construction material. Although wood is susceptible to decay or insect attack under specific conditions, it is inherently a very durable material when protected from moisture. Many covered bridges built during the 19th century have lasted over 100 years because they were protected from direct exposure to the elements. In modem applications, it is seldom practical or economical to cover bridges; however, the use of wood preservatives has extended the life of wood used in exposed bridge applications. Using modem application techniques and preservative chemicals, wood can now be effectively protected from deterioration for periods of50 years or longer. In addition, wood treated with preservatives requires little maintenance and no painting. Another misconception about wood as a bridge material is that its use is limited to minor structures of no appreciable size. This belief is probably based on the fact that trees for commercial timber are limited in size and are normally harvested before they reach maximum size. Although tree diameter limits the size of sawn lumber, the advent of glued-laminated timber (glulam) some 40 years ago provided designers with several compensating alternatives. Glulam, which is the most widely used modem timber bridge material, is manufactured by bonding sawn lumber laminations together with waterproof structural adhesives. Thus, glulam members are virtually unlimited in depth, width, and length and can be manufactured in a wide range of shapes. Glulam provides higher design strengths than sawn lumber and provides better utilization of the available timber resource by permitting the manufacture of large wood structural elements from smaller lumber sizes. Technological advances in laminating over the past four decades have further increased the suitability and performance of wood for modern highway bridge applications.
Download or read book World Guide to Covered Bridges written by William S. Caswell, Jr. and published by . This book was released on 2021-10-31 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Listing of covered wood truss bridges throughout the world with descriptions and directions to locate each bridge.
