Download or read book Transport Phenomena written by Robert Byron Bird and published by . This book was released on 1960 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Laser Cladding of Metals written by Pasquale Cavaliere and published by Springer Nature. This book was released on 2020-11-05 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser cladding is an additive manufacturing technology capable of producing coatings due to the surface fusion of metals. The selected powder is fed into a focused laser beam to be melted and deposited as coating. This allows to apply material in a selected way onto those required sections of complex components. The process main properties are the production of a perfect metallurgically bonded and fully dense coatings; the minimal heat affected zone and low dilution between the substrate and filler material resulting in functional coatings that perform at reduced thickness, so fewer layers are applied; fine, homogeneous microstructure resulting from the rapid solidification rate that promotes wear resistance of carbide coatings; near net-shape weld build-up requires little finishing effort; extended weldability of sensitive materials like carbon-rich steels or nickel-based superalloys that are difficult or even impossible to weld using conventional welding processes; post-weld heat treatment is often eliminated as the small heat affected zone minimizes component stress; excellent process stability and reproducibility because it is numerical controlled welding process. The typical applications are the dimensional restoration; the wear and corrosion protection; additive manufacturing. The wide range of materials that can be deposited and its suitability for treating small areas make laser cladding particularly appropriate to tailor surface properties to local service requirements and it opens up a new perspective for surface engineered materials. The main key aspect to be scientifically and technologically explored are the type of laser; the powders properties; the processing parameters; the consequent microstructural and mechanical properties of the processed material; the capability of fabrication of prototypes to rapid tooling and rapid manufacturing. Distills critical concepts, methods, and applications from leading full-length chapters, along with the authors’s own deep understanding of the material taught, into a concise yet rigorous graduate and advanced undergraduate text; Reinforces concepts covered with detailed solutions to illuminating and challenging industrial applications; Discusses current and future applications of laser cladding in additive manufacturing.

Download or read book Evidence Based Public Health written by Ross C. Brownson and published by Oxford University Press. This book was released on 2010-12-03 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are at least three ways in which a public health program or policy may not reach stated goals for success: 1) Choosing an intervention approach whose effectiveness is not established in the scientific literature; 2) Selecting a potentially effective program or policy yet achieving only weak, incomplete implementation or "reach," thereby failing to attain objectives; 3) Conducting an inadequate or incorrect evaluation that results in a lack of generalizable knowledge on the effectiveness of a program or policy; and 4) Paying inadequate attention to adapting an intervention to the population and context of interest To enhance evidence-based practice, this book addresses all four possibilities and attempts to provide practical guidance on how to choose, carry out, and evaluate evidence-based programs and policies in public health settings. It also begins to address a fifth, overarching need for a highly trained public health workforce. This book deals not only with finding and using scientific evidence, but also with implementation and evaluation of interventions that generate new evidence on effectiveness. Because all these topics are broad and require multi-disciplinary skills and perspectives, each chapter covers the basic issues and provides multiple examples to illustrate important concepts. In addition, each chapter provides links to the diverse literature and selected websites for readers wanting more detailed information. An indispensable volume for professionals, students, and researchers in the public health sciences and preventative medicine, this new and updated edition of Evidence-Based Public Health aims to bridge research and evidence with policies and the practice of public health.

Download or read book Die Ausdchnungslehre Von 1844 Oder Die Lineale Ausdehnungslehre Ein Neuer Zweig Der Mathematik Da written by Hermann Grassmann and published by Legare Street Press. This book was released on 2022-10-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

Download or read book Nanotechnology Principles and Practices written by Sulabha K. Kulkarni and published by Springer. This book was released on 2014-11-03 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the rapid advances in the field, this book offers an up-to-date introduction to nanomaterials and nanotechnology. Though condensed into a relatively small volume, it spans the whole range of multidisciplinary topics related to nanotechnology. Starting with the basic concepts of quantum mechanics and solid state physics, it presents both physical and chemical synthetic methods, as well as analytical techniques for studying nanostructures. The size-specific properties of nanomaterials, such as their thermal, mechanical, optical and magnetic characteristics, are discussed in detail. The book goes on to illustrate the various applications of nanomaterials in electronics, optoelectronics, cosmetics, energy, textiles and the medical field and discusses the environmental impact of these technologies. Many new areas, materials and effects are then introduced, including spintronics, soft lithography, metamaterials, the lotus effect, the Gecko effect and graphene. The book also explains the functional principles of essential techniques, such as scanning tunneling microscopy (STM), atomic force microscopy (AFM), scanning near field optical microscopy (SNOM), Raman spectroscopy and photoelectron microscopy. In closing, Chapter 14, ‘Practicals’, provides a helpful guide to setting up and conducting inexpensive nanotechnology experiments in teaching laboratories.

Download or read book The Materials Science of Thin Films written by Milton Ohring and published by Academic Press. This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared as a textbook complete with problems after each chapter, specifically intended for classroom use in universities.

Download or read book The Mathematics Teacher in the Digital Era written by Alison Clark-Wilson and published by Springer Science & Business Media. This book was released on 2013-12-08 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the key issue of the initial education and lifelong professional learning of teachers of mathematics to enable them to realize the affordances of educational technology for mathematics. With invited contributions from leading scholars in the field, this volume contains a blend of research articles and descriptive texts. In the opening chapter John Mason invites the reader to engage in a number of mathematics tasks that highlight important features of technology-mediated mathematical activity. This is followed by three main sections: An overview of current practices in teachers’ use of digital technologies in the classroom and explorations of the possibilities for developing more effective practices drawing on a range of research perspectives (including grounded theory, enactivism and Valsiner’s zone theory). A set of chapters that share many common constructs (such as instrumental orchestration, instrumental distance and double instrumental genesis) and research settings that have emerged from the French research community, but have also been taken up by other colleagues. Meta-level considerations of research in the domain by contrasting different approaches and proposing connecting or uniting elements

Download or read book Nanofabrication written by Zheng Cui and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with the most up-to-date information and development in the Nanofabrication area. It presents a one-stop description at the introduction level on most of the technologies that have been developed which are capable of making structures below 100nm. Principles of each technology are introduced and illustrated with minimum mathematics involved. The book serves as a practical guide and first hand reference for those working in nanostructure fabrication.

Download or read book The Double Bond written by Carole Angier and published by Macmillan. This book was released on 2002 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perhaps the most important writer to emerge from the death camps, Primo Levi is known for "Survival in Auschwitz, The Reawakening, " and the classic "The Periodic Table." Angier has spent nearly ten years writing this meticulously researched, vivid, and moving biography.

Download or read book Ultrasound for Material Characterization and Processing written by Francesca Lionetto and published by Mdpi AG. This book was released on 2021-11-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic waves are nowadays used for multiple purposes including both low-intensity/high frequency and high-intensity/low-frequency ultrasound. Low-intensity ultrasound transmits energy through the medium in order to obtain information about the medium or to convey information through the medium. It is successfully used in non-destructive inspection, ultrasonic dynamic analysis, ultrasonic rheology, ultrasonic spectroscopy of materials, process monitoring, applications in civil engineering, aerospace and geological materials and structures, and in the characterization of biological media. Nowadays, it is an essential tool for assessing metals, plastics, aerospace composites, wood, concrete, and cement. High-intensity ultrasound deliberately affects the propagation medium through the high local temperatures and pressures generated. It is used in industrial processes such as welding, cleaning, emulsification, atomization, etc.; chemical reactions and reactor induced by ultrasonic waves; synthesis of organic and inorganic materials; microstructural effects; heat generation; accelerated material characterization by ultrasonic fatigue testing; food processing; and environmental protection. This book collects eleven papers, one review, and ten research papers with the aim to present recent advances in ultrasonic wave propagation applied for the characterization or the processing of materials. Both fundamental science and applications of ultrasound in the field of material characterization and material processing have been gathered.

Download or read book Corporate Governance Strengthening Latin American Corporate Governance The Role of Institutional Investors written by OECD and published by OECD Publishing. This book was released on 2011-07-01 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report reflects long-term, in-depth discussion and debate by participants in the Latin American Roundtable on Corporate Governance.

Download or read book Plant Genetic Conservation written by Nigel Maxted and published by Springer Science & Business Media. This book was released on 1997-01-31 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent development of ideas on biodiversity conservation was already being considered almost three-quarters of a century ago for crop plants and the wild species related to them, by the Russian geneticist N.!. Vavilov. He was undoubtedly the first scientist to understand the impor tance for humankind of conserving for utilization the genetic diversity of our ancient crop plants and their wild relatives from their centres of diversity. His collections showed various traits of adaptation to environ mental extremes and biotypes of crop diseases and pests which were unknown to most plant breeders in the first quarter of the twentieth cen tury. Later, in the 1940s-1960s scientists began to realize that the pool of genetic diversity known to Vavilov and his colleagues was beginning to disappear. Through the replacement of the old, primitive and highly diverse land races by uniform modem varieties created by plant breed ers, the crop gene pool was being eroded. The genetic diversity of wild species was equally being threatened by human activities: over-exploita tion, habitat destruction or fragmentation, competition resulting from the introduction of alien species or varieties, changes and intensification of land use, environmental pollution and possible climate change.

Download or read book Nanochemistry written by Geoffrey A Ozin and published by Royal Society of Chemistry. This book was released on 2023-01-17 with total page 875 pages. Available in PDF, EPUB and Kindle. Book excerpt: International interest in nanoscience research has flourished in recent years, as it becomes an integral part in the development of future technologies. The diverse, interdisciplinary nature of nanoscience means effective communication between disciplines is pivotal in the successful utilization of the science. Nanochemistry: A Chemical Approach to Nanomaterials is the first textbook for teaching nanochemistry and adopts an interdisciplinary and comprehensive approach to the subject. It presents a basic chemical strategy for making nanomaterials and describes some of the principles of materials self-assembly over 'all' scales. It demonstrates how nanometre and micrometre scale building blocks (with a wide range of shapes, compositions and surface functionalities) can be coerced through chemistry to organize spontaneously into unprecedented structures, which can serve as tailored functional materials. Suggestions of new ways to tackle research problems and speculations on how to think about assembling the future of nanotechnology are given. Primarily designed for teaching, this book will appeal to graduate and advanced undergraduate students. It is well illustrated with graphical representations of the structure and form of nanomaterials and contains problem sets as well as other pedagogical features such as further reading, case studies and a comprehensive bibliography.

Download or read book Integrated Reporting written by Chiara Mio and published by Springer. This book was released on 2016-08-11 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a timely addition to the fast-growing international debate on Integrated Reporting, which offers a holistic view of the evolution and practice of Integrated Reporting. The book covers the determinants and consequences of Integrated Reporting, as well as examining some of the most relevant issues (particularly in the context of the United States) in the debate about Integrated Reporting.

Download or read book The Art Science of Learning Design written by Marcelo Maina and published by Springer. This book was released on 2015-07-21 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: We live in an era defined by a wealth of open and readily available information, and the accelerated evolution of social, mobile and creative technologies. The provision of knowledge, once a primary role of educators, is now devolved to an immense web of free and readily accessible sources. Consequently, educators need to redefine their role not just “from sage on the stage to guide on the side” but, as more and more voices insist, as “designers for learning”. The call for such a repositioning of educators is heard from leaders in the field of technology-enhanced learning (TEL) and resonates well with the growing culture of design-based research in Education. However, it is still struggling to find a foothold in educational practice. We contend that the root causes of this discrepancy are the lack of articulation of design practices and methods, along with a shortage of tools and representations to support such practices, a lack of a culture of teacher-as-designer among practitioners, and insufficient theoretical development. The Art and Science of Learning Design (ASLD) explores the frameworks, methods, and tools available for teachers, technologists and researchers interested in designing for learning Learning Design theories arising from findings of research are explored, drawing upon research and practitioner experiences. It then surveys current trends in the practices, methods, and methodologies of Learning Design. Highlighting the translation of theory into practice, this book showcases some of the latest tools that support the learning design process itself.

Download or read book Environmental Health Literacy written by Symma Finn and published by Springer. This book was released on 2018-09-12 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores various and distinct aspects of environmental health literacy (EHL) from the perspective of investigators working in this emerging field and their community partners in research. Chapters aim to distinguish EHL from health literacy and environmental health education in order to classify it as a unique field with its own purposes and outcomes. Contributions in this book represent the key aspects of communication, dissemination and implementation, and social scientific research related to environmental health sciences and the range of expertise and interest in EHL. Readers will learn about the conceptual framework and underlying philosophical tenets of EHL, and its relation to health literacy and communications research. Special attention is given to topics like dissemination and implementation of culturally relevant environmental risk messaging, and promotion of EHL through visual technologies. Authoritative entries by experts also focus on important approaches to advancing EHL through community-engaged research and by engaging teachers and students at an early age through developing innovative STEM curriculum. The significance of theater is highlighted by describing the use of an interactive theater experience as an approach that enables community residents to express themselves in non-verbal ways.

Download or read book Transport Phenomena for Engineers written by Louis Theodore and published by . This book was released on 1971 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: