Download or read book Growth Industries in Manufacturing written by and published by . This book was released on 1957 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Trouble in the Making written by Mary Hallward-Driemeier and published by World Bank Publications. This book was released on 2017-10-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology and globalization are threatening manufacturing’s traditional ability to deliver both productivity and jobs at a large scale for unskilled workers. Concerns about widening inequality within and across countries are raising questions about whether interventions are needed and how effective they could be. Trouble in the Making? The Future of Manufacturing-Led Development addresses three questions: - How has the global manufacturing landscape changed and why does this matter for development opportunities? - How are emerging trends in technology and globalization likely to shape the feasibility and desirability of manufacturing-led development in the future? - If low wages are going to be less important in defining competitiveness, how can less industrialized countries make the most of new opportunities that shifting technologies and globalization patterns may bring? The book examines the impacts of new technologies (i.e., the Internet of Things, 3-D printing, and advanced robotics), rising international competition, and increased servicification on manufacturing productivity and employment. The aim is to inform policy choices for countries currently producing and for those seeking to enter new manufacturing markets. Increased polarization is a risk, but the book analyzes ways to go beyond focusing on potential disruptions to position workers, firms, and locations for new opportunities. www.worldbank.org/futureofmanufacturing
Download or read book Growth industries in manufacturing written by Vereinigte Staaten. Department of Commerce. Office of Area Development and published by . This book was released on 1957 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book U S Manufacturing written by Thomas J. Duesterberg and published by Bloomsbury Publishing USA. This book was released on 2003-09-30 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evolving rapidly from a mass-produced product orientation to a flexible, solutions-oriented model, the changing manufacturing sector is poised to lead a global economic recovery. Truly an insider's guide to the future of this critical sector, this book provides policy recommendations based on a wealth of information. Despite the appearance of difficult economic times for U.S. manufacturing, that sector of the American economy is actually the most innovative and competitive in the world. Far from being confined to the tired stereotype of Industrial Age commodities, such as steel and mass-produced consumer products, U.S. manufacturing has long been an engine for growth. In the 1990s, this central role was strengthened as new technology development and application spurred higher levels of growth throughout the economy. In its present configuration, manufacturing includes such high-tech industries as fiberoptics and microchips. Globalization has accelerated the growth of the manufacturing sector by increasing competitive pressures to cut costs and develop new products faster, spreading out the fixed costs of R&D and investment. Truly an insider's guide to the future of this critical sector, this book provides policy recommendations based on a wealth of information. Evolving rapidly from a mass-produced product orientation to a flexible, solutions-oriented model, the changing manufacturing sector is poised to lead a global economic recovery. But it can do so only if the right policies are in place in the United States. To that end, the editors of this volume recommend fiscal and tort reform, higher educational achievement, and continued deregulation. At the international level, further trade liberalization and steps to reduce the trade deficit are recommended to ensure the staying power of U.S. competitiveness, particularly for technology-intensive industries.
Download or read book Manufacturing Matters written by Stephen S. Cohen and published by New York : Basic Books. This book was released on 1987-06-03 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics of Industry Growth written by Jati Sengupta and published by Springer Science & Business Media. This book was released on 2012-05-02 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Economic growth of a country depends on its industries. The focus of modern growth theory is basically macroeconomics, although neoclassical models use competitive markets and the optimization behavior of households and firms in general equilibrium framework. The emphasis here is on industry growth, where the microfoundations of industry are analyzed in terms of economic efficiency. The various linkages which link firm growth with the industry growth are discerned here under various market structures both competitive and monopolistic. The role of information in facilitating market signals and allowing the adoption of new processes has been especially emphasized in this volume. Many issues of market failure and the suboptimality of competitive equilibria are due to incomplete and imperfect information structures and we need a comprehensive theory of information structures underlying the process of industry growth and its dynamics. This book will be of interest to economists studying economic and industry growth and innovation.
Download or read book Industries Without Smokestacks written by Richard S. Newfarmer and published by Oxford University Press. This book was released on 2018 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study prepared by the United Nations University World Institute for Development Economics Research (UNU-WIDER)
Download or read book Productivity Growth in the Manufacturing Sector written by Mihir Kumar Pal and published by Emerald Group Publishing. This book was released on 2021-06-03 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of manufacturing industries is one of the key sectors in helping to mitigate global recessions. Productivity Growth in the Manufacturing Sector thoroughly discusses issues and potential remedies of this sector for a range of international countries.
Download or read book Transforming Industrial Policy for the Digital Age written by Patrizio Bianchi and published by Edward Elgar Publishing. This book was released on 2019 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book argues that digital globalization is inducing deep and productive transformations, making industrial policy necessary in order to reorientate development towards inclusive and more sustainable growth. The book also demonstrates that industrialization remains an important development process for emerging countries. Regarding the future of jobs, the authors show how the substitution of labour in automation is not inevitable since technology is also complementary to human capital. Policymakers should pay more attention to the new skills that will be required. A particular concern is is the rapid change in technology and business compared to institutions which take time to adapt. Territories have an important role to play in order to speed-up institutional adaptation, providing they can act coherently with the other levels of government.
Download or read book Growth in Manufacturing Industry written by and published by . This book was released on 1981 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing and Investment Around the World written by Industrial Systems Research and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and Investment around the World: An International Survey of Modernization and Development This book is a comprehensive cross national examination of modernization and development in manufacturing. The focus is on the nature and sources of the important variations that occur internationally in growth, competitiveness, and attractiveness to foreign direct investors. The study begins with an overview of existing published research on general manufacturing development before turning to particular key aspects. It compares production and investment in a range of Western and non-Western countries. It also presents case studies of growth and performance in major industries and sectors. Contents: 1. Manufacturing and Investment Around the World: Introduction and Overview 2. Manufacturing Growth and Performance: a Review of Research Findings 3. Manufacturing in Western Countries: International Comparisons 4. Manufacturing in Non-Western Countries: International Comparisons 5. International Trade, Markets, and Demand Trends 6. Finance and Investment in Manufacturing 7. Industrial Manufacturing Facilities and Services
Download or read book Handbook of Manufacturing Industries in the World Economy written by John R. Bryson and published by Edward Elgar Publishing. This book was released on 2015-04-30 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This interdisciplinary volume provides a critical and multi-disciplinary review of current manufacturing processes, practices, and policies, and broadens our understanding of production and innovation in the world economy. Chapters highlight how firms
Download or read book Fit for Growth written by Vinay Couto and published by John Wiley & Sons. This book was released on 2017-01-10 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical approach to business transformation Fit for Growth* is a unique approach to business transformation that explicitly connects growth strategy with cost management and organization restructuring. Drawing on 70-plus years of strategy consulting experience and in-depth research, the experts at PwC’s Strategy& lay out a winning framework that helps CEOs and senior executives transform their organizations for sustainable, profitable growth. This approach gives structure to strategy while promoting lasting change. Examples from Strategy&’s hundreds of clients illustrate successful transformation on the ground, and illuminate how senior and middle managers are able to take ownership and even thrive during difficult periods of transition. Throughout the Fit for Growth process, the focus is on maintaining consistent high-value performance while enabling fundamental change. Strategy& has helped major clients around the globe achieve significant and sustained results with its research-backed approach to restructuring and cost reduction. This book provides practical guidance for leveraging that expertise to make the choices that allow companies to: Achieve growth while reducing costs Manage transformation and transition productively Create lasting competitive advantage Deliver reliable, high-value performance Sustainable success is founded on efficiency and high performance. Companies are always looking to do more with less, but their efforts often work against them in the long run. Total business transformation requires total buy-in, and it entails a series of decisions that must not be made lightly. The Fit for Growth approach provides a clear strategy and practical framework for growth-oriented change, with expert guidance on getting it right. *Fit for Growth is a registered service mark of PwC Strategy& Inc. in the United States
Download or read book Additive Manufacturing Handbook written by Adedeji B. Badiru and published by CRC Press. This book was released on 2017-05-19 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical and practical interests in additive manufacturing (3D printing) are growing rapidly. Engineers and engineering companies now use 3D printing to make prototypes of products before going for full production. In an educational setting faculty, researchers, and students leverage 3D printing to enhance project-related products. Additive Manufacturing Handbook focuses on product design for the defense industry, which affects virtually every other industry. Thus, the handbook provides a wide range of benefits to all segments of business, industry, and government. Manufacturing has undergone a major advancement and technology shift in recent years.
Download or read book Reimagining Industry Growth written by Daniel A. Varroney and published by John Wiley & Sons. This book was released on 2022-01-06 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tap into the potential of strategic partnerships with industry associations in this groundbreaking new book Reimagining Industry Growth offers readers a blueprint to harnessing the power of leading industry associations as strategic partners. By utilizing those partnerships, business leaders will become able to leverage the collective strength of the supply chain to overcome challenges, address uncertainty, mitigate risks, and position their industries for growth. The book provides an overview of strategic partnerships, how they work, and how they can be applied to industry relationships with trade associations. It includes: Illuminating and factual case studies outlining strategic partnerships in five different industry segments Roadmaps for executives to apply the lessons learned from industry success stories on leveraging relationships with trade associations Advice on how to move the needle for entire industries via effective strategic partnerships and achieve unprecedented growth Ideal for executives, managers, business leaders of all kinds, business students and professors, and association executives. Reimagining Industry Growth is required reading for anyone who hopes to tap into the potential strength and value of effective strategic partnerships.
Download or read book Research and Development in Industry written by National Science Foundation (U.S.) and published by . This book was released on 1966 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engines of Growth written by and published by . This book was released on 1995 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
