Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties. Volume 1 reviews fundamentals and diffusion-controlled phase transformations. After a historical overview, chapters in part one discuss fundamental principles of thermodynamics, diffusion and kinetics as well as phase boundary interfaces. Chapters in part two go on to consider ferrite formation, proeutectoid ferrite and cementite transformations, pearlite formation and massive austenite-ferrite phase transformations. Part three discusses the mechanisms of bainite transformations, including carbide-containing and carbide-free bainite. The final part of the book considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations, dynamic strain-induced ferrite transformations (DIST) as well as the effects of magnetic fields and heating rates. With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. Discusses the fundamental principles of thermodynamics, diffusion and kinetics Considers various transformations, including ferrite formation, proeutectoid ferrite and cementite transformations Considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations
Download or read book Phase Transitions in Materials written by Brent Fultz and published by Cambridge University Press. This book was released on 2014-08-14 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear, concise and rigorous textbook covering phase transitions in the context of advances in electronic structure and statistical mechanics.
Download or read book Rates of Phase Transformations written by R. H. Doremus and published by Academic Press. This book was released on 1985-10-28 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Transformations in Metals and Alloys Third Edition Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 1992-09-10 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade since the first edition of this popular text was published, the metallurgical field has undergone rapid developments in many sectors. Nonetheless, the underlying principles governing these developments remain the same. A textbook that presents these advances within the context of the fundamentals is greatly needed by instructors in the field Phase Transformations in Metals and Alloys, Second Edition maintains the simplicity that undergraduate instructors and students have come to appreciate while updating and expanding coverage of recently developed methods and materials. The book is effectively divided into two parts. The beginning chapters contain the background material necessary for understanding phase transformations - thermodynamics, kinetics, diffusion theory and the structure and properties of interfaces. The following chapters deal with specific transformations - solidification, diffusional transformation in solids and diffusionless transformation. Case studies of engineering alloys are incorporated to provide a link between theory and practice. New additions include an extended list of further reading at the end of each chapter and a section containing complete solutions to all exercises in the book Designed for final year undergraduate and postgraduate students of metallurgy, materials science, or engineering materials, this is an ideal textbook for both students and instructors.
Download or read book Phase Transformations in Metals and Alloys Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 2009-02-10 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanded and revised to cover developments in the field over the past 17 years, and now reprinted to correct errors in the prior printing, Phase Transformation in Metals and Alloys, Third Edition provides information and examples that better illustrate the engineering relevance of this topic. It supplies a comprehensive overview of specific types o
Download or read book Phase Transformations in Condensed Systems written by Morris E. Fine and published by . This book was released on 1978 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanisms of Diffusional Phase Transformations in Metals and Alloys written by Hubert I. Aaronson and published by CRC Press. This book was released on 2016-04-19 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed by the late metallurgy professor and master experimentalist Hubert I. Aaronson, this collection of lecture notes details the fundamental principles of phase transformations in metals and alloys upon which steel and other metals industries are based. Mechanisms of Diffusional Phase Transformations in Metals and Alloys is devoted to solid-s
Download or read book Kinetics of Phase Transitions written by Sanjay Puri and published by CRC Press. This book was released on 2009-03-24 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive introduction with the necessary background material to make it accessible for a wide scientific audience, Kinetics of Phase Transitions discusses developments in domain-growth kinetics. This book combines pedagogical chapters from leading experts in this area and focuses on incorporating various experimentally releva
Download or read book Phase Transformations in Materials written by G. Kostorz and published by Wiley-VCH. This book was released on 2001-10-25 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: For all kinds of materials, phase transformations show common phenomena and mechanisms, and often turn a material, for example metals, multiphase alloys, ceramics or composites, into its technological useful form. The physics and thermodynamics of a transformation from the solid to liquid state or from one crystal form to another are therefore essential for creating high-performance materials. This handbook covers phase transformations, a general phenomenon central to understanding the behavior of materials and for creating high-performance materials. It will be an essential reference for all materials scientists, physicists and engineers involved in the research and development of new high performance materials. It is the revised and enhanced edition of the renowned book edited by the late P. Haasen in 1990 (Vol. 5, Materials Science and Technology).
Download or read book Phase Transformation in Materials written by A. K. Jena and published by . This book was released on 1992 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Text for senior undergrads or first-year graduate students. Assumes previous exposure to phase equilibria, crystal structures, defects, and metallography. Covers the principles, diffusion and empirical rate equations, classification of phase transformations, atomic mechanisms, spinodal decomposition. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book The Theory of Transformations in Metals and Alloys written by John Christian and published by Newnes. This book was released on 2002-12-10 with total page 1202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.
Download or read book Phase Transformations written by American Society for Metals and published by . This book was released on 1970 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Transformations in Solids written by National Research Council (U.S.). Committee on Solids and published by . This book was released on 1951 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Equilibria Phase Diagrams and Phase Transformations written by Mats Hillert and published by Cambridge University Press. This book was released on 2007-11-22 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational tools allow material scientists to model and analyze increasingly complicated systems to appreciate material behavior. Accurate use and interpretation however, requires a strong understanding of the thermodynamic principles that underpin phase equilibrium, transformation and state. This fully revised and updated edition covers the fundamentals of thermodynamics, with a view to modern computer applications. The theoretical basis of chemical equilibria and chemical changes is covered with an emphasis on the properties of phase diagrams. Starting with the basic principles, discussion moves to systems involving multiple phases. New chapters cover irreversible thermodynamics, extremum principles, and the thermodynamics of surfaces and interfaces. Theoretical descriptions of equilibrium conditions, the state of systems at equilibrium and the changes as equilibrium is reached, are all demonstrated graphically. With illustrative examples - many computer calculated - and worked examples, this textbook is an valuable resource for advanced undergraduates and graduate students in materials science and engineering.
Download or read book Phase Transformations in Metals and Alloys written by David A. Porter and published by CRC Press. This book was released on 2021-11-07 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised to reflect recent developments in the field, Phase Transformation in Metals and Alloys, Fourth Edition, continues to be the most authoritative and approachable resource on the subject. It supplies a comprehensive overview of specific types of phase transformations, supplemented by practical case studies of engineering alloys. The book’s unique presentation links a basic understanding of theory with application in a gradually progressive yet exciting manner. Based on the authors’ teaching notes, the text takes a pedagogical approach and provides examples for applications and problems that can be readily used for exercises. NEW IN THE FOURTH EDITION 40% of the figures and 30% of the text Insights provided by numerical modelling techniques such as ab initio, phase field, cellular automaton, and molecular dynamics Insights from the application of advanced experimental techniques, such as high-energy X-ray diffraction, high-resolution transmission electron microscopy, scanning electron microscopy, combined with electron backscattered diffraction New treatment of ternary phase diagrams and solubility products The concept of paraequilibrium in systems containing highly mobile interstitial elements Thermodynamics of grain boundaries and the influence of segregation on grain boundary diffusion Reference to software tools for solving diffusion problems in multicomponent systems Introduction to concepts related to coincident site lattices and methods for determining the dislocation content of grain boundaries and interfaces Updated treatment of coherency and interface structure including the important fcc–bcc interfaces Treatment of metallic glasses expanded to cover critical cooling rate Austin–Rickets equation introduced as an alternative to the Avrami equation in the case of precipitation kinetics Discussion of the effects of overlap in nucleation, growth and coarsening Discussion of pearlite and bainite transformations updated Entirely new and extensive treatment of diffusionless martensitic transformations covering athermal and thermally activated martensite in ferrous systems as well as shape memory, superelasticity and rubber-like behavior in ordered nonferrous alloys New practical applications covering spinodal alloys, fir-tree structures in aluminum castings, Al–Cu–Li aerospace alloys, superelastic and shape memory alloys, quenched and partitioned steels, advanced high-strength steels and martensitic stainless steels Each chapter now concludes with a summary of the main points References to scientific publications and suggestions for further reading updated to reflect experimental and computational advances Aimed at students studying metallurgy and materials science and engineering, the Fourth Edition retains the previous editions’ popular easy-to-follow style and excellent mix of basic and advanced information, making it ideal for those who are new to the field. A new solutions manual and PowerPoint figure slides are available to adopting professors.
Download or read book Transformations of Materials written by Dimitri D Vvedensky and published by Morgan & Claypool Publishers. This book was released on 2019-09-30 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase transformations are among the most intriguing and technologically useful phenomena in materials, particularly with regard to controlling microstructure. After a review of thermodynamics, this book has chapters on Brownian motion and the diffusion equation, diffusion in solids based on transition-state theory, spinodal decomposition, nucleation and growth, instabilities in solidification, and diffusionless transformations. Each chapter includes exercises whose solutions are available in a separate manual. This book is based on the notes from a graduate course taught in the Centre for Doctoral Training in the Theory and Simulation of Materials. The course was attended by students with undergraduate degrees in physics, mathematics, chemistry, materials science, and engineering. The notes from this course, and this book, were written to accommodate these diverse backgrounds.
Download or read book Theory of Structural Transformations in Solids written by Armen G. Khachaturyan and published by Courier Corporation. This book was released on 2013-12-01 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing both theoretical and practical aspects of phase transformation in alloys, this text formulates significant aspects of the quantitative metallurgy of phase transformations. It further applies solid-state theoretical concepts to structure problems arising in experimental studies of real alloys. Author Armen G. Khachaturyan, Professor of Materials Science at Rutgers University, ranks among the foremost authorities on this subject. In this volume, he takes a creative approach to examining change in atomic structure and morphology caused by ordering, strain-induced ordering, strain-controlled decomposition, and strain-induced coarsening. Unifying relationships among various fields of solid-state physics are stressed throughout the book. Topics include structure changes in two-phase alloys controlled by the phase transformation elastic strain, in addition to important results in the area of microscopic elasticity regarding problems of elastic interaction in impurity atoms, and strain-induced ordering and decomposition in interstitial solutions. An excellent text for advanced undergraduate and graduate courses in physical metallurgy, solid state physics, solid state chemistry, and materials science, this volume is also a valuable reference for professionals conducting research in phase transformations
