Download or read book Growth and Characterization of Ito Thin Film by Magnetron Sputtering written by Öcal Tuna and published by LAP Lambert Academic Publishing. This book was released on 2010-05 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this study Indium Tin Oxide (ITO) thin films were grown by both DC and RF magnetron sputtering techniques. To know deposition rate of ITO, system was calibrated for both DCMS and RFMS and then ITO were grown on glass substrate with the thickness of 70 nm and 40 nm by changing substrate temperature. The effect of substrate temperature, film thickness and sputtering method on structural, electrical and optical properties were investigated. The results show that substrate temperature and film thickness substantially affects the film properties, especially crystallization and resistivity. The thin films grown at the lower than 150 oC showed amorphous structure. However, crystallization was detected with the furtherincrease of substrate temperature. Band gap of ITO was calculated to be about 3.64eV at the substrate temperature of 150 oC, and itwidened with substrate temperature increment. From electrical measurements the resistivity at room temperature was obtained 1.28x10-4 and 1.29x10-4 D-cm, for DC and RF sputtered films, respectively. We also measured temperature dependence resistivity and the Hall coefficient of the films, and we calculated carrier concentration and Hall mobility."

Download or read book Optoelectronics written by Sergei Pyshkin and published by BoD – Books on Demand. This book was released on 2017-07-12 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optoelectronics - Advanced Device Structures (Book IV) is following the Optoelectronics (Books I, II, and III) published in 2011, 2013, and 2015, as part of the InTech collection of international works on optoelectronics. Accordingly, as with the first three books of the collection, this book covers recent achievements by specialists around the world. The growing number of countries participating in this endeavor as well as joint participation of the US and Moldova scientists in edition of this book testifies to the unifying effect of science. An interested reader will find in the book the description of properties and applications employing organic and inorganic materials, as well as the methods of fabrication and analysis of operation and regions of application of modern optoelectronic devices.

Download or read book Characterization of Inert Gas RF Plasma treated Indium Tin Oxide Thin Films Deposited Via Pulsed DC Magnetron Sputtering written by Amber Nicole Reed and published by . This book was released on 2008 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Strategies in Thin Film Engineering by Magnetron Sputtering written by Alberto Palmero and published by MDPI. This book was released on 2020-12-10 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have witnessed the flourishing of numerous novel strategies based on the magnetron sputtering technique aimed at the advanced engineering of thin films, such as HiPIMS, combined vacuum processes, the implementation of complex precursor gases or the inclusion of particle guns in the reactor, among others. At the forefront of these approaches, investigations focused on nanostructured coatings appear today as one of the priorities in many scientific and technological communities: The science behind them appears in most of the cases as a "terra incognita", fascinating both the fundamentalist, who imagines new concepts, and the experimenter, who is able to create and study new films with as of yet unprecedented performances. These scientific and technological challenges, along with the existence of numerous scientific issues that have yet to be clarified in classical magnetron sputtering depositions (e.g., process control and stability, nanostructuration mechanisms, connection between film morphology and properties or upscaling procedures from the laboratory to industrial scales) have motivated us to edit a specialized volume containing the state-of-the art that put together these innovative fundamental and applied research topics. These include, but are not limited to: • Nanostructure-related properties; • Atomistic processes during film growth; • Process control, process stability, and in situ diagnostics; • Fundamentals and applications of HiPIMS; • Thin film nanostructuration phenomena; • Tribological, anticorrosion, and mechanical properties; • Combined procedures based on the magnetron sputtering technique; • Industrial applications; • Devices.

Download or read book Fiber Optic Sensors written by Ignacio R. Matias and published by Springer. This book was released on 2016-11-01 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes important recent developments in fiber optic sensor technology and examines established and emerging applications in a broad range of fields and markets, including power engineering, chemical engineering, bioengineering, biomedical engineering, and environmental monitoring. Particular attention is devoted to niche applications where fiber optic sensors are or soon will be able to compete with conventional approaches. Beyond novel methods for the sensing of traditional parameters such as strain, temperature, and pressure, a variety of new ideas and concepts are proposed and explored. The significance of the advent of extended infrared sensors is discussed, and individual chapters focus on sensing at THz frequencies and optical sensing based on photonic crystal structures. Another important topic is the resonances generated when using thin films in conjunction with optical fibers, and the enormous potential of sensors based on lossy mode resonances, surface plasmon resonances, and long-range surface exciton polaritons. Detailed attention is also paid to fiber Bragg grating sensors and multimode interference sensors. Each chapter is written by an acknowledged expert in the subject under discussion.

Download or read book Nanostructured Metal Oxides and Devices written by M. K. Jayaraj and published by Springer Nature. This book was released on 2020-04-16 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book primarily covers the fundamental science, synthesis, characterization, optoelectronic properties, and applications of metal oxide nanomaterials. It discusses the basic aspects of synthetic procedures and fabrication technologies, explains the related experimental techniques and also elaborates on the current status of nanostructured oxide materials and related devices. Two major aspects of metal oxide nanostructures – their optical and electrical properties – are described in detail. The first five chapters focus on the optical characteristics of semiconducting materials, especially metal oxides at the nanoscale. The following five chapters discuss the electrical properties observed in metal oxide-based semiconductors and the status quo of device-level developments in a variety of applications such as sensors, transistors, dilute magnetic semiconductors, and dielectric materials. The basic science and mechanism behind the optoelectronic phenomena are explained in detail, to aid readers interested in the structure–property symbiosis in semiconducting nanomaterials. In short, the book offers a valuable reference guide for researchers and academics in the areas of material science and semiconductor technology, especially nanophotonics and electronics.

Download or read book Handbook of Visual Display Technology written by Janglin Chen and published by Springer. This book was released on 2012-01-23 with total page 2700 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook offers a comprehensive description of the science, technology, economic and human interface factors associated with the displays industry. With expert contributions from over 150 international display professionals and academic researchers, it covers all classes of display device and discusses established principles, emergent technologies, and particular areas of application.

Download or read book Reactive Sputter Deposition written by Diederik Depla and published by Springer Science & Business Media. This book was released on 2008-06-24 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this valuable work, all aspects of the reactive magnetron sputtering process, from the discharge up to the resulting thin film growth, are described in detail, allowing the reader to understand the complete process. Hence, this book gives necessary information for those who want to start with reactive magnetron sputtering, understand and investigate the technique, control their sputtering process and tune their existing process, obtaining the desired thin films.

Download or read book A Study of Process Optimization and Inhomogeneous Electro optical Properties for ITO Thin Films Prepared by DC Magnetron Sputtering written by 曾坤三 and published by . This book was released on 2014 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Physics Of Solar Cells written by Jenny A Nelson and published by World Scientific Publishing Company. This book was released on 2003-05-09 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the physics of the photovoltaic cell. It is suitable for undergraduates, graduate students, and researchers new to the field. It covers: basic physics of semiconductors in photovoltaic devices; physical models of solar cell operation; characteristics and design of common types of solar cell; and approaches to increasing solar cell efficiency. The text explains the terms and concepts of solar cell device physics and shows the reader how to formulate and solve relevant physical problems. Exercises and worked solutions are included.

Download or read book Sputtering Materials for VLSI and Thin Film Devices written by Jaydeep Sarkar and published by William Andrew. This book was released on 2010-12-13 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important resource for students, engineers and researchers working in the area of thin film deposition using physical vapor deposition (e.g. sputtering) for semiconductor, liquid crystal displays, high density recording media and photovoltaic device (e.g. thin film solar cell) manufacturing. This book also reviews microelectronics industry topics such as history of inventions and technology trends, recent developments in sputtering technologies, manufacturing steps that require sputtering of thin films, the properties of thin films and the role of sputtering target performance on overall productivity of various processes. Two unique chapters of this book deal with productivity and troubleshooting issues. The content of the book has been divided into two sections: (a) the first section (Chapter 1 to Chapter 3) has been prepared for the readers from a range of disciplines (e.g. electrical, chemical, chemistry, physics) trying to get an insight into use of sputtered films in various devices (e.g. semiconductor, display, photovoltaic, data storage), basic of sputtering and performance of sputtering target in relation to productivity, and (b) the second section (Chapter 4 to Chapter 8) has been prepared for readers who already have background knowledge of sputter deposition of thin films, materials science principles and interested in the details of sputtering target manufacturing methods, sputtering behavior and thin film properties specific to semiconductor, liquid crystal display, photovoltaic and magnetic data storage applications. In Chapters 5 to 8, a general structure has been used, i.e. a description of the applications of sputtered thin films, sputtering target manufacturing methods (including flow charts), sputtering behavior of targets (e.g. current - voltage relationship, deposition rate) and thin film properties (e.g. microstructure, stresses, electrical properties, in-film particles). While discussing these topics, attempts have been made to include examples from the actual commercial processes to highlight the increased complexity of the commercial processes with the growth of advanced technologies. In addition to personnel working in industry setting, university researchers with advanced knowledge of sputtering would also find discussion of such topics (e.g. attributes of target design, chamber design, target microstructure, sputter surface characteristics, various troubleshooting issues) useful. . Unique coverage of sputtering target manufacturing methods in the light of semiconductor, displays, data storage and photovoltaic industry requirements Practical information on technology trends, role of sputtering and major OEMs Discussion on properties of a wide variety of thin films which include silicides, conductors, diffusion barriers, transparent conducting oxides, magnetic films etc. Practical case-studies on target performance and troubleshooting Essential technological information for students, engineers and scientists working in the semiconductor, display, data storage and photovoltaic industry

Download or read book Transparent Oxide Electronics written by Pedro Barquinha and published by John Wiley & Sons. This book was released on 2012-03-15 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent electronics is emerging as one of the most promising technologies for the next generation of electronic products, away from the traditional silicon technology. It is essential for touch display panels, solar cells, LEDs and antistatic coatings. The book describes the concept of transparent electronics, passive and active oxide semiconductors, multicomponent dielectrics and their importance for a new era of novel electronic materials and products. This is followed by a short history of transistors, and how oxides have revolutionized this field. It concludes with a glance at low-cost, disposable and lightweight devices for the next generation of ergonomic and functional discrete devices. Chapters cover: Properties and applications of n-type oxide semiconductors P-type conductors and semiconductors, including copper oxide and tin monoxide Low-temperature processed dielectrics n and p-type thin film transistors (TFTs) – structure, physics and brief history Paper electronics – Paper transistors, paper memories and paper batteries Applications of oxide TFTs – transparent circuits, active matrices for displays and biosensors Written by a team of renowned world experts, Transparent Oxide Electronics: From Materials to Devices gives an overview of the world of transparent electronics, and showcases groundbreaking work on paper transistors

Download or read book Optical Properties of Thin Solid Films written by O. S. Heavens and published by Courier Corporation. This book was released on 1991-01-01 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authoritative reference treats the formation, structure, optical properties, and uses of thin solid films, emphasizing causes of their unusual qualities. 162 figures. 19 tables. 1955 edition.

Download or read book Chemical Sensing with Solid State Devices written by Marc J. Madou and published by Elsevier. This book was released on 2012-12-02 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a lucid presentation for chemists, electrical engineers, surface scientists, and solid-state physicists, of the fundamentals underlying the construction of simple and small chemical sensors. The first part of the book is a review of the theoretical background in solid state physics, chemistry and electronics. Semiconductor and solid electrolyte bulk models are reviewed as well as solid/gas and solid/liquid interface models. Membranes and catalysis theory are also covered expansively. The second part is a discussion of more complete sensor devices, their essential components, and of the important developments in this area over the last fifteen to twenty years. The book provides guidance through the multidisciplinary world of chemical sensors. It should be understandable to students with some training in physics and chemistry and a general knowledge of electronics. Finally, comments on economic considerations in the development of new sensor products and suggestionsfor future research and development should be of value to company R&D planners.

Download or read book Transparent Conductive Materials written by David Levy and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by well-known pioneers in the field, this handbook and ready reference provides a comprehensive overview of transparent conductive materials with a strong application focus. Following an introduction to the materials and recent developments, subsequent chapters discuss the synthesis and characterization as well as the deposition techniques that are commonly used for energy harvesting and light emitting applications. Finally, the book concludes with a look at future technological advances. All-encompassing and up-to-date, this interdisciplinary text runs the gamut from chemistry and materials science to engineering, from academia to industry, and from fundamental challenges to readily available applications.

Download or read book Advanced Materials 93 written by Shigeyuki Somiya and published by Newnes. This book was released on 2012-12-02 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramics, Powders, Corrosion and Advanced Processing covers the proceedings of the Third International Union of Materials Research Societies (IUMRS) International Conference on Advanced Materials (ICAM), held in Sunshine City, Ikebukuro, Tokyo, Japan from August 31 to September 4, 1993. The said conference discusses the procedures for advanced materials. The book is divided into four parts. Part 1 includes topics such as preparation of powders from different compounds and substances and the application of different methods and techniques. Part 2 talks about high temperature oxidations and corrosions; degradation resistance of thermal barrier coatings; the environmental effects on corrosion behavior of stainless steel; effect of gas composition and pressure on high temperature corrosion; and other related concepts. Part 3 includes topics such as fatigue-crack behavior; the factors that lead to it; fracture resistance and how it is increased; and the application of ceramics to heat-resistant engines and turbines. Part 4 covers the advanced processing of ceramics, and Part 5 deals with the fabrication of silicon-based ceramics. The text is highly recommended for chemists and engineers in the field of ceramics who would like to know more about the advances in its studies and research.

Download or read book Silicon Heterojunction Solar Cells written by W.R. Fahrner and published by Trans Tech Publications Ltd. This book was released on 2006-08-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of today must face up to two contradictory energy problems: on the one hand, there is the sharply growing consumer demand in countries such as China and India. On the other hand, natural resources are dwindling. Moreover, many of those countries which still possess substantial gas and oil supplies are politically unstable. As a result, renewable natural energy sources have received great attention. Among these, solar-cell technology is one of the most promising candidates. However, there still remains the problem of the manufacturing costs of such cells. Many attempts have been made to reduce the production costs of “conventional” solar cells (manufactured from monocrystalline silicon using diffusion methods) by instead using cheaper grades of silicon, and simpler pn-junction fabrication. That is the ‘hero’ of this book; the heterojunction solar cell.