Download or read book Ground Engineering Principles and Practices for Underground Coal Mining written by J.M. Galvin and published by Springer. This book was released on 2016-02-02 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches readers ground engineering principles and related mining and risk management practices associated with underground coal mining. It establishes the basic elements of risk management and the fundamental principles of ground behaviour and then applies these to the essential building blocks of any underground coal mining system, comprising excavations, pillars, and interactions between workings. Readers will also learn about types of ground support and reinforcement systems and their operating mechanisms. These elements provide the platform whereby the principles can be applied to mining practice and risk management, directed primarily to bord and pillar mining, pillar extraction, longwall mining, sub-surface and surface subsidence, and operational hazards. The text concludes by presenting the framework of risk-based ground control management systems for achieving safe workplaces and efficient mining operations. In addition, a comprehensive reference list provides additional sources of information on the subject. Throughout, a large variety of examples show good and bad mining situations in order to demonstrate the application, or absence, of the established principles in practice. Written by an expert in underground coal mining and risk management, this book will help students and practitioners gain a deep understanding of the basic principles behind designing and conducting mining operations that are safe, efficient, and economically viable. Provides a comprehensive coverage of ground engineering principles within a risk management framework Features a large variety of examples that show good and poor mining situations in order to demonstrate the application of the established principles in practice Ideal for students and practitioners About the author Emeritus Professor Jim Galvin has a relatively unique combination of industrial, research and academic experience in the mining industry that spans specialist research and applied knowledge in ground engineering, mine management and risk management. His career encompasses directing ground engineering research groups in South Africa and Australia; practical mining experience, including active participation in the mines rescue service and responsibility for the design, operation, and management of large underground coal mines and for the consequences of loss of ground control as a mine manager; appointments as Professor and Head of the School of Mining Engineering at the University of New South Wales; and safety advisor to a number of Boards of Directors of organisations associated with mining. Awards Winner of the ACARP Excellence Research Award 2016. The Australian Coal Industry's Research Program selects recipients to receive ACARP Research and Industry Excellence Awards every two years. The recipients are selected on the recommendation of technical committees. They are honored for achievement of a considerable advance in an area of importance to the Australian coal mining industry. An important criterion is the likelihood of the results from the project being applied in mines. Winner of the Merv Harris Award from the Mine Managers Association of Australia. The Merv Harris Award is named for Merv Harris who donated money to be invested for a continuing award in 1988. With the award, the Mine Managers Association of Australia honors members of the Association who demonstrate technical achievement in the Australian Coal Mining Industry. The first award was granted in 1990, since then, only two people have received this honor. The book has received the following awards.... AGS (Australian Geomechanics Society) congratulates Dr Galvin for these awards
Download or read book Ground Engineering written by Yiming Zhao and published by . This book was released on 2018-04 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles and Practices of Modern Coal Mining written by R. D. Singh and published by New Age International. This book was released on 2005 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles And Practices Of Modern Coal Mining Is A Comprehensive Text Book On The Theory And Practice Of Coal Mining. It Highlights The Principles And Describes The Modern Techniques Of Surface And Underground Coal Mining Citing Examples From India And Abroad. It Deals With The Exploitation Of Coal Seams Of Different Thicknesses And Dips Occurring In A Variety Of Conditions. Emerging Technologies Of Coal Mining And Their Applications Have Also Been Amply Discussed.After An Introductory Chapter Tracing The History Of Coal Mining And The Development Of Coal Mining Industry In Different Principal Coal ProducingCountries And Highlighting The Emerging Technologies Of Coal Mining The World Over, The Book Offers A Chapter By Chapter Discussion Of The State Of Art Of Underground And Surface Coal Mining Technology.Every Aspect Of Science Of Coal Mining From Geological Occurrence And Exploration To Planning And Exploitation Of Coal Seams, Including Management Of Environment Has Been Scrutinised By The Author. For The Professionals In The Coal Industry As Well As To The Planners, Researchers And Students Of Mining Engineering, The Book Will Be A Useful Reference.
Download or read book Advances in Coal Mine Ground Control written by Syd S. Peng and published by Woodhead Publishing. This book was released on 2017-05-25 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Coal Mine Ground Control is a comprehensive text covering all recent advances in coal mine ground control, the most advanced subsystem of the rapidly advancing coal mining systems. This complete resource is written by Professor Syd Peng who, alongside leading experts from the world’s major coal producing countries, has contributed extensively to the understanding of subsidence from underground coal mining, longwall operations and ground control in underground mines. Syd and the team of contributors bring together key advances from the past decade into one comprehensive resource that is accessible to all those studying, researching and working in the mining industry. This book is an essential text for undergraduate and graduate students of mining engineering and related programs, and a must-have reference for mining, civil and geotechnical engineers. Written and edited by the world’s leading experts on ground control in coal mining Covers all aspects of ground control practices in coal mines Focuses on advances over the past decade, equipping readers with the most up-to-date knowledge regarding current research and practices in the field
Download or read book Principles and Practice in Mining Engineering written by Abhay Kumar Soni and published by CRC Press. This book was released on 2023-12-19 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: - provides a comprehensive yet concise overview of the practical aspects of mining engineering - covers real-world applications through (industry-oriented) case studies - features environment-oriented content that will have a wider appeal than just mining engineers - caters especially to Indian students and professionals
Download or read book Result getting Methods in Underground Coal Mining written by and published by . This book was released on 1918 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coal Mine Ground Control written by Marcel Talbot and published by . This book was released on 2016-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of coal mining is to obtain coal from the ground. Coal is valued for its energy content, and, since the 1880s, has been widely used to generate electricity. Steel and cement industries use coal as a fuel for extraction of iron from iron ore and for cement production. Coal mining has had many developments over the recent years, from the early days of men tunneling, digging and manually extracting the coal on carts, to large open cut and long wall mines. Mining at this scale requires the use of draglines, trucks, conveyors, jacks and shearers. The most economical method of coal extraction from coal seams depends on the depth and quality of the seams, and the geology and environmental factors. Coal mining processes are differentiated by whether they operate on the surface or underground. Surface mining and deep underground mining are the two basic methods of mining. The choice of mining method depends primarily on depth of burial, density of the overburden and thickness of the coal seam. Seams relatively close to the surface, at depths less than approximately 180 ft (50 m), are usually surface mined. Coal that occurs at depths of 180 to 300 ft (50 to 100 m) is usually deep mined, but in some cases surface mining techniques can be used. Most coal seams are too deep underground for opencast mining and require underground mining, a method that currently accounts for about 60 percent of world coal production. This book entitled Coal Mine Ground Control covers every major topic concerned with ground control in underground coal mines, with emphasis on the application of various ground control theories and techniques. The book reviews current general practices in underground mine layouts, roof control, and common ground control failures, and the discussion of the state-of-the-art of coal mine ground control technology. The book will also prove useful to practical engineers involved in either the design or the day-to-day operations of underground coal mines.
Download or read book Engineering Geology Applied to the Design and Operation of Underground Coal Mines written by C. Richard Dunrud and published by DIANE Publishing. This book was released on 2000-07 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This course on engineering geology applied to underground coal mining has been taught to geologists & engineers of State & Federal governments, mining companies, & consulting firms involved in designing, developing, & operating underground coal mines. Discusses in detail how the disciplines of geology & geotechnology apply to exploration, design, & operation of underground coal mines. It is intended for practicing scientists, engineering geologists, & engineers. Shows how the disciplines of geology, geotechnology, & mining engineering can be integrated & used to make underground coal mining safer, more efficient, & more environmentally acceptable.
Download or read book Coal Mine Ground Control written by Syd S. Peng and published by Wiley-Interscience. This book was released on 1986 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revision of the standard reference in the field has been updated to reflect the enormous progress made in the sciences of coal mine ground control. Many chapters are completely new and virtually all have been substantially rewritten. The book covers common ground control problems underground, rock properties and in situ stresses, geological effects and roof stability classification and investigation, roof bolting, coal pillars, ground control in longwall mining and multiple-seam mining, bumps, instrumentation, special supports and problems and surface subsidence.
Download or read book Coal written by National Research Council and published by National Academies Press. This book was released on 2007-12-21 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.
Download or read book Underground Mining Methods written by W. A. Hustrulid and published by SME. This book was released on 2001 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground Mining Methods presents the latest principles and techniques in use today. Reflecting the international and diverse nature of the industry, a series of mining case studies is presented covering the commodity range from iron ore to diamonds extracted by operations located in all corners of the world. Industry experts have contributed 77 chapters. This book is certain to become a standard for every practicing mining engineer and student alike. Sections include: General Mine Design Considerations, Room-and-Pillar Mining of Hard Rock/Soft Rock, Longwall Mining of Hard Rock, Shrinkage Stoping, Sublevel Stoping, Cut-and-Fill Mining, Sublevel Caving, Panel Caving, Foundations for Design, and Underground Mining Looks to the Future.
Download or read book Modern American Coal Mining written by Bise, Christopher J. and published by Society for Mining, Metallurgy, and Exploration. This book was released on 2013-10-18 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern American Coal Mining: Methods and Applications covers a full range of coal mining and coal industry topics, with chapters written by leading coal mining industry professionals and academicians. Highlights from the book include coal resources and distribution, mine design, advances in strata control and power systems, improvements in surface mining, ventilation to reduce fires and explosions, drilling and blasting, staffing requirement ratios, management and preplanning, and coal preparation and reclamation. The text is enhanced with 11 case studies that are representative of underground and surface mines in the United States. Narrative descriptions and appropriate mine plans are presented, with attention given to unique features and situations that are addressed through mine design and construction. A useful glossary is included, as are many examples, figures, equations and tables, to make the text even more useful.
Download or read book Rock engineering for underground coal mining written by J. Nielen Van der Merwe and published by . This book was released on 2010 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introductory Mining Engineering written by Howard L. Hartman and published by John Wiley & Sons. This book was released on 2002-08-09 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory text and reference on mining engineering highlighting the latest in mining technology Introductory Mining Engineering outlines the role of the mining engineer throughout the life of a mine, including prospecting for the deposit, determining the site's value, developing the mine, extracting the mineral values, and reclaiming the land afterward. This Second Edition is written with a focus on sustainability-managing land to meet the economic and environmental needs of the present while enhancing its ability to also meet the needs of future generations. Coverage includes aboveground and underground methods of mining for a wide range of substances, including metals, nonmetals, and fuels. Completely up to date, this book presents the latest information on such technologies as remote sensing, GPS, geophysical surveying, and mineral deposit evaluation, as well as continuous integrated mining operations and autonomous trucks. Also included is new information on landscape restoration, regional planning, wetlands protection, subsidence mitigation, and much more. New chapters include coverage of: * Environmental responsibilities * Regulations * Health and safety issues Generously supplemented with more than 200 photographs, drawings, and tables, Introductory Mining Engineering, Second Edition is an indispensable book for mining engineering students and a comprehensive reference for professionals.
Download or read book Design Optimization in Underground Coal Systems Underground longwall ground control simulator written by and published by . This book was released on 1981 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mining Techniques written by Abhay Soni and published by BoD – Books on Demand. This book was released on 2021-02-17 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mining techniques have evolved over time, culminating in the well-defined field of “mining science,” which encompasses aspects such as engineering, chemistry, physics, technology, and management, among others. This book explains how mining techniques can be handled and improved further to make mining practices far more productive, safe, and eco-friendly. It is a useful resource for researchers, students, policy formulators, and decision-makers in different areas of mining and engineering.
Download or read book Introduction to Underground Coal Mining written by and published by . This book was released on 2007 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
