Download or read book Advances in Ground Source Heat Pump Systems written by Simon Rees and published by Woodhead Publishing. This book was released on 2016-05-13 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ground-Source Heat Pump Systems relates the latest information on source heat pumps (GSHPs), the types of heating and/or cooling systems that transfer heat from, or to, the ground, or, less commonly, a body of water. As one of the fastest growing renewable energy technologies, they are amongst the most energy efficient systems for space heating, cooling, and hot water production, with significant potential for a reduction in building carbon emissions. The book provides an authoritative overview of developments in closed loop GSHP systems, surface water, open loop systems, and related thermal energy storage systems, addressing the different technologies and component methods of analysis and optimization, among other subjects. Chapters on building integration and hybrid systems complete the volume. Provides the geological aspects and building integration covered together in one convenient volume Includes chapters on hybrid systems Presents carefully selected chapters that cover areas in which there is significant ongoing research Addresses geothermal heat pumps in both heating and cooling modes
Download or read book Ground Source Heat Pumps written by Ioan Sarbu and published by Academic Press. This book was released on 2015-10-01 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground-Source Heat Pumps presents the theory and some of the most recent advances of GSHPs and their implementation in the heating/cooling system of buildings. The authors explore the thermodynamic cycle with calculation, operation regimes and economic indicators and GHG emissions of a vapor compression heat pump. They go on to examine substitution strategies of non-ecological refrigerants and types of compressors and heat pumps, before delving into the different GSHP systems, as well as their compared economic, energy and environmental performances using classical and optimized adjustment for various operating modes. Surface water heat pumps and ground water heat pumps are covered, and special focus is given to both vertical and horizontal ground-coupled heat pump systems, for which modelling and simulation is discussed, and experimental systems are described. Due to its advanced approach to the subject, this book will be especially valuable for researchers, graduate students and academics, and as reference for engineers and specialists in the varied domains of building services. Explores fundamentals and state-of-the-art research, including ground-coupled heat pump (GCHP) systems. Includes performance assessment and comparison for different types of GSHP, numerical simulation models, practical applications of GSHPs with details on the renewable energy integration, information on refrigerants, and economic analysis.
Download or read book Geothermal Heating and Cooling written by Stephen P. Kavanaugh and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Heating and Cooling is a complete revision of Ground-Source Heat Pumps: Design of Geothermal Systems for Commercial and Institutional Buildings, which is recognized as the primary reference for nonresidential ground-source heat pump (GSHP) installations. This new work takes advantage of the many lessons learned since the time of the original publication, when GSHPs were primarily residential applications. Many improvements have evolved, and performance data, both positive and negative, is now available to guide the development of best practices. This essential guide for HVAC design engineers, design-build contractors, GSHP subcontractors, and energy/construction managers also provides building owners and architects with insights into characteristics of quality engineering firms and the information that should be provided by design firms competing for GSHP projects.This revision draws on new ASHRAE and industry research in critical areas, as well as measured data from long-term installations and optimized installation practices used by high-production GSHP contractors. Nearly all chapters and appendices were completely rewritten, and they include coverage of closed-loop ground (ground-coupled), groundwater, and surface-water systems plus GSHP equipment and piping. Additional information on site characterization has been added, including a new hydrogeological chapter. Another new chapter contains results of recent field studies, energy and demand characteristics, and updated information to optimize GSHP system cost. While other publications deal primarily with ground-coupled heat pumps, this text includes detailed coverage of groundwater, surface-water, and GSHP costs.Tables, graphs, and equations are provided in both Inch-Pound (I-P) and International System (SI) units. As a bonus, supplemental Microsoft® Excel® macro-enabled spreadsheets for a variety of GSHP calculations accompany the text.
Download or read book Ground source Heat Pumps written by Stephen P. Kavanaugh and published by Amer Society of Heating. This book was released on 1997 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Thermogeology written by David Banks and published by John Wiley & Sons. This book was released on 2012-08-13 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative guide provides a basis for understanding the emerging technology of ground source heating and cooling. It equips engineers, geologists, architects, planners and regulators with the fundamental skills needed to manipulate the ground's huge capacity to store, supply and receive heat, and to implement technologies (such as heat pumps) to exploit that capacity for space heating and cooling. The author has geared the book towards understanding ground source heating and cooling from the ground side (the geological aspects), rather than solely the building aspects. He explains the science behind thermogeology and offers practical guidance on different design options. An Introduction to Thermogeology: ground source heating and cooling is aimed primarily at professionals whose skill areas impinge on the emerging technology of ground source heating and cooling. They will be aware of the importance of the technology and wish to rapidly acquire fundamental theoretical understanding and design skills. This second edition has been thoroughly updated and expanded to cover new technical developments and now includes end-of-chapter study questions to test the reader's understanding.
Download or read book Geothermal Heat Pumps Installation Guide written by Stephen K. Ewings and published by Stephen K Ewings. This book was released on 2008-10 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geothermal Heat Pumps written by Karl Ochsner and published by Taylor & Francis. This book was released on 2012-04-27 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Heat Pumps is the most comprehensive guide to the selection, design and installation of geothermal heat pumps available. This leading manual presents the most recent information and market developments in order to put any installer, engineer or architect in the position to design, select and install a domestic geothermal heat pump system. Internationally respected expert Karl Ochsner presents the reasons to use heat pumps, introduces basic theory and reviews the wide variety of available heat pump models.
Download or read book Renewable Geothermal Energy Explorations written by Basel Ismail and published by BoD – Books on Demand. This book was released on 2019-04-03 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: The geothermal resources of the Earth are enormous. The resource is considered to be an environmentally friendly clean energy source that could significantly contribute to the reduction of GHG emissions when utilized for electrical power generation or direct heating applications. The source of geothermal energy is the continuous heat energy flux flowing from the interior of the Earth toward its surface. Geothermal energy resources vary geographically, depending on the depth and temperature of the resource, the rock chemical composition, and the abundance of ground water. This book is the result of contributions from several experts and researchers worldwide. The introductory chapter highlights the principles of geothermal power generation using LEGE-ORC technology and presents a summary of the following book chapters. Due to its important utilization and future prospects, various interesting topics of research related to geothermal energy explorations are covered in this book. It is hoped that the book will become a useful source of information and basis for extended research for researchers, academics, policy makers, and practitioners in the area of renewable geothermal energy explorations.
Download or read book Heating and Cooling with Ground Source Heat Pumps in Cold and Moderate Climates written by Vasile Minea and published by CRC Press. This book was released on 2022-04-19 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heating and Cooling with Ground-Source Heat Pumps in Cold and Moderate Climates: Fundamentals and Basic Concepts covers fundamentals and design principles of vertical and horizontal indirect and direct expansion closed-loop, as well as ground and surface-water ground-source heat pump systems. It explains the thermodynamic aspects of mechanical and thermochemical compression cycles of geothermal heat pumps, and describes the energetic, economic, and environmental aspects associated with the use of ground-source heat pump systems for heating and cooling residential and commercial/institutional buildings in moderate and cold climates. Based on the author's more than 30 years of technical experience Focuses on ground-source heat pump technologies that can be successfully applied in moderate and cold climates Discusses technical aspects as well as the most common and uncommon application fields of basic system configurations This work is aimed at designers of HVAC systems, as well as geological, mechanical, and chemical engineers implementing environmentally-friendly heating and cooling technologies for buildings.
Download or read book Impacts of Shallow Geothermal Energy on Groundwater Quality written by Matthijs Bonte and published by IWA Publishing. This book was released on 2015-01-15 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of shallow geothermal energy (SGE) systems to acclimatize buildings has increased exponentially in the Netherlands and worldwide. In certain areas, SGE systems are constructed in aquifers also used for drinking water supply raising the question of potential groundwater quality impact. Impacts of Shallow Geothermal Energy on Groundwater Quality provides a hydrochemical and geomicrobial overview of the effects of ground source heat pumps and aquifer thermal energy storage. The area is investigated with field and laboratory experiments, and reactive transport models, showing that shallow geothermal energy systems can influence groundwater quality in a number of ways. Most prominent in open ground source heating systems operating at low temperature (20°C) is the physical mixing of deep and shallow groundwater of different quality distorting the natural water quality stratification in aquifers. At a temperature of 25°C and beyond certain trace elements were observed to mobilize in laboratory experiments, and beyond 40°C redox conditions change significantly while the microbial community shift towards a thermophilic community. div Based on the results of this research, guidelines are presented for monitoring and permitting of SGE systems. The book is a useful resource for regulators of these systems, water companies and installers of the SGE systems. Author: Matthijs Bonte, Amsterdam, The Netherlands
Download or read book Performance of Ground and Water Source Heat Pumps written by Canadian Standards Association and published by Rexdale, Ont. : The Association. This book was released on 1989 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Thermogeology written by David Banks and published by John Wiley & Sons. This book was released on 2012-05-30 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative guide provides a basis for understanding theemerging technology of ground source heating and cooling. It equipsengineers, geologists, architects, planners and regulators with thefundamental skills needed to manipulate the ground's huge capacityto store, supply and receive heat, and to implement technologies(such as heat pumps) to exploit that capacity for space heating andcooling. The author has geared the book towards understanding groundsource heating and cooling from the ground side (the geologicalaspects), rather than solely the building aspects. Heexplains the science behind thermogeology and offers practicalguidance on different design options. An Introduction to Thermogeology: ground source heating andcooling is aimed primarily at professionals whose skill areasimpinge on the emerging technology of ground source heating andcooling. They will be aware of the importance of the technology andwish to rapidly acquire fundamental theoretical understanding anddesign skills. This second edition has been thoroughly updated and expanded tocover new technical developments and now includes end-of-chapterstudy questions to test the reader's understanding.
Download or read book Heating and Cooling with Ground Source Heat Pumps in Cold and Moderate Climates written by Vasile Minea and published by CRC Press. This book was released on 2022-04-19 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heating and Cooling with Ground-Source Heat Pumps in Cold and Moderate Climates: Design Principles, Potential Applications and Case Studies focuses on applications and cases studies of ground-source heat pumps in moderate and cold climates. It details technical aspects (such as materials, thermal fluid carriers and pumping, and drilling/trenching technologies), as well as the most common and uncommon application fields for basic system configurations. The principles of system integrations and applications in moderate and cold climates (such as hybrid, solar-assisted, thermo-syphon, foundation, mines, snow melting, district heating and cooling ground-source heat pump systems, etc.) are also presented, each followed by case studies. Based on the author's more than 30 years of technical experience Discusses ground-source heat pump technologies that can be successfully applied in moderate and cold climates Presents several case studies, including successful energy results, as well as the main lessons learned This work is aimed at designers of HVAC systems, as well as geological, mechanical, and chemical engineers implementing environmentally-friendly heating and cooling technologies for buildings.
Download or read book An Overview of Ground and Water Source Heat Pumps written by J.D. Deerman and published by . This book was released on 1989 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Exergy Analysis of Heating Refrigerating and Air Conditioning written by Ibrahim Dincer and published by Academic Press. This book was released on 2015-08-08 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improve and optimize efficiency of HVAC and related energy systems from an exergy perspective. From fundamentals to advanced applications, Exergy Analysis of Heating, Air Conditioning, and Refrigeration provides readers with a clear and concise description of exergy analysis and its many uses. Focusing on the application of exergy methods to the primary technologies for heating, refrigerating, and air conditioning, Ibrahim Dincer and Marc A. Rosen demonstrate exactly how exergy can help improve and optimize efficiency, environmental performance, and cost-effectiveness. The book also discusses the analysis tools available, and includes many comprehensive case studies on current and emerging systems and technologies for real-world examples. From introducing exergy and thermodynamic fundamentals to presenting the use of exergy methods for heating, refrigeration, and air conditioning systems, this book equips any researcher or practicing engineer with the tools needed to learn and master the application of exergy analysis to these systems. Explains the fundamentals of energy/exergy for practitioners/researchers in HVAC&R fields for improving efficiency Covers environmental assessments and economic evaluations for a well-rounded approach to the subject Includes comprehensive case studies on both current and emerging systems/technologies Provides examples from a range of applications – from basic HVAC&R to more diverse processes such as industrial heating/cooling, cogeneration and trigeneration, and thermal storage
Download or read book Geothermal Heat Pump and Heat Engine Systems written by Andrew D. Chiasson and published by John Wiley & Sons. This book was released on 2016-07-08 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique approach to the study of geothermal energy systems This book takes a unique, holistic approach to the interdisciplinary study of geothermal energy systems, combining low, medium, and high temperature applications into a logical order. The emphasis is on the concept that all geothermal projects contain common elements of a "thermal energy reservoir" that must be properly designed and managed. The book is organized into four sections that examine geothermal systems: energy utilization from resource and site characterization; energy harnessing; energy conversion (heat pumps, direct uses, and heat engines); and energy distribution and uses. Examples are provided to highlight fundamental concepts, in addition to more complex system design and simulation. Key features: Companion website containing software tools for application of fundamental principles and solutions to real-world problems. Balance of theory, fundamental principles, and practical application. Interdisciplinary treatment of the subject matter. Geothermal Heat Pump & Heat Engine Systems: Theory and Practice is a unique textbook for Energy Engineering and Mechanical Engineering students as well as practicing engineers who are involved with low-enthalpy geothermal energy systems.
Download or read book 1981 Inventory of the Utilization of Water source Heat Pumps in the Conterminous United States written by Alcee Nicholas Turcan and published by . This book was released on 1984 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
