Download or read book Ground Anchors and Anchored Structures written by Petros P. Xanthakos and published by John Wiley & Sons. This book was released on 1991-09-03 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treating anchorages as a direct application of the laws of statics and the theories governing the transfer of load, this book focuses on designs that are safe and reasonably priced. It is divided into two parts. Following a general introduction in the first chapter, Part One goes on to explore anchor systems, components, installation and construction details. Presents special anchor systems such as extractable, compression-type, multibell, and regroutable anchors. Analyzes the transfer of load and its relation to failure modes and anchor load capacity; deals with design considerations; covers mechanisms and types of corrosion; and details anchor stressing, testing programs, and evaluation standards. Part Two considers uses and applications and design aspects of anchored structures; presents design examples of practical value and reasonable simplicity; and incorporates examples and case histories.
Download or read book Design and Construction of Soil Anchor Plates written by Hamed Niroumand and published by Butterworth-Heinemann. This book was released on 2016-08-11 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Primarily designed and constructed to resist outwardly directed loads imposed on the foundation of a structure, anchor plates play an important role in the design of structures (including seawalls, transmission towers, tunnels, buried pipelines, and retaining walls). Design and Construction of Soil Anchor Plates focuses on the various theories based on the design and construction techniques of anchor plates in soil mechanics. The focus of this reference is on design methods, theories, and procedures for constructing permanent or temporary ground anchors and anchored systems. Topics include: General Requirements of Vertical Anchor Plates and Design Criteria, Estimation of Ultimate Capacity in Vertical Anchor Plates, General Requirements of Vertical Anchor Plates and Design Criteria, Type and Length of Inclined Anchor Plates, Early Theories on Anchor Plates in Multi-Layers Soil, and Basic Theories on Passive Pressure in Vertical Anchor Plates. With this reference, researchers and designers will find a valuable guide to the various theories, techniques, and equations for anchor design. - Basic theories on passive pressure in vertical anchor plates - Estimation of ultimate capacity in vertical anchor plates - Uplift capacity for shallow anchor plates - Requirements of vertical anchor plates and design criteria - Type and length of inclined anchor plates
Download or read book Ground Anchors and Anchored Systems written by Federal Highway Administration and published by . This book was released on 2006-08-01 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-practice information on the design and installation of cement-grouted ground anchors and anchored systems for highway applications. The anchored systems discussed include flexible anchored walls, slopes supported using ground anchors, landslide stabilization systems, and structures that incorporate tiedown anchors. This book draws extensively in describing issues such as subsurface investigation and laboratory testing, basic anchoring principles, ground anchor load testing, and inspection of construction materials and methods used for anchored systems. This book provides detailed information on design analyses for ground anchored systems. Topics discussed include selection of design earth pressures, ground anchor design, design of corrosion protection system for ground anchors, design of wall components to resist lateral and vertical loads, evaluation of overall anchored system stability, and seismic design of anchored systems. Also included in this book are two detailed design examples and technical specifications for ground anchors and for anchored walls.
Download or read book Foundation Engineering Handbook written by Hsai-Yang Fang and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than ten years have passed since the first edition was published. During that period there have been a substantial number of changes in geotechnical engineering, especially in the applications of foundation engineering. As the world population increases, more land is needed and many soil deposits previously deemed unsuitable for residential housing or other construction projects are now being used. Such areas include problematic soil regions, mining subsidence areas, and sanitary landfills. To overcome the problems associated with these natural or man-made soil deposits, new and improved methods of analysis, design, and implementation are needed in foundation construction. As society develops and living standards rise, tall buildings, transportation facilities, and industrial complexes are increasingly being built. Because of the heavy design loads and the complicated environments, the traditional design concepts, construction materials, methods, and equipment also need improvement. Further, recent energy and material shortages have caused additional burdens on the engineering profession and brought about the need to seek alternative or cost-saving methods for foundation design and construction.
Download or read book Earthquake Induced Landslides written by Keizo Ugai and published by Springer Science & Business Media. This book was released on 2012-10-25 with total page 955 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismicity is a major trigger for landslides with often devastating effects. The Japan Landslide Society (JLS) therefore organized a meeting fully dedicated to the research area of earthquake induced landslides. The symposium covers all aspects of earthquake-induced landslides including the phenomena occurred in manmade embankments as well as in natural slopes in mountainous areas. In this comprehensive volume on landslide science the JLS presents the Proceedings of this First International Symposium on Earthquake-Induced Landslides, held in November 2012 in Kiryu, Japan.
Download or read book Soil and Rock Anchors for Mobile Homes written by William D. Kovacs and published by . This book was released on 1979 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ground Control and Improvement written by Petros P. Xanthakos and published by John Wiley & Sons. This book was released on 1994-06-14 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive compilation concerned with a variety of modern methods being used worldwide to improve soil and rock conditions supporting new and remedial construction. Ground water lowering and drainage techniques, soil compaction, excavation support methods, permeation and jet grouting are among the many topics discussed. More than 100 tables and 650 figures illustrate the text.
Download or read book Recommendations for Prestressed Rock and Soil Anchors written by and published by . This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earth Retention Systems Handbook written by Alan Macnab and published by McGraw Hill Professional. This book was released on 2002-04-09 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a systematic and comprehensive presentation of temporary excavation shoring and earth retention systems used to construct permanent facilities inside them. These systems are used to construct underground pipelines, tunnels, tank and storage facilities, foundations and structures. Each chapter presents a shoring system type description, how it is constructed, equipment requirements, cost analysis, etc. Safety, inspection and testing codes and methods included throughout.
Download or read book Deep Excavation written by Chang-Yu Ou and published by CRC Press. This book was released on 2014-04-21 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: With continued economic development and increasing urbanization, excavations go deeper and become larger in scale, and are sometimes even carried out in difficult soils. These conditions require advanced analysis and design methods and construction technologies. Most books on general foundation engineering introduce the basic analysis and design of excavation, but do not delve into practical considerations. This book examines both theory and practice, from basic to advanced, and discusses the major methods currently in practice around the world. Each chapter also includes problems and their solutions to develop a practical, real-world understanding.
Download or read book Handbook of Sustainability Science and Research written by Walter Leal Filho and published by Springer. This book was released on 2017-10-03 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multidisciplinary handbook explores concrete case studies which illustrate how sustainability science and research can contribute to the realization of the goals of the 2030 Agenda for Sustainable Development. It contains contributions from sustainability researchers from across the world.
Download or read book Drilled Shafts written by Michael W. O'Neill and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geosynthetic Reinforced Soil GRS Walls written by Jonathan T. H. Wu and published by John Wiley & Sons. This book was released on 2019-07-10 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to provide a detailed overview of Geosynthetic Reinforced Soil Walls Geosynthetic Reinforced Soil (GRS) Walls deploy horizontal layers of closely spaced tensile inclusion in the fill material to achieve stability of a soil mass. GRS walls are more adaptable to different environmental conditions, more economical, and offer high performance in a wide range of transportation infrastructure applications. This book addresses both GRS and GMSE, with a much stronger emphasis on the former. For completeness, it begins with a review of shear strength of soils and classical earth pressure theories. It then goes on to examine the use of geosynthetics as reinforcement, and followed by the load-deformation behavior of GRS mass as a soil-geosynthetic composite, reinforcing mechanisms of GRS, and GRS walls with different types of facing. Finally, the book finishes by covering design concepts with design examples for different loading and geometric conditions, and the construction of GRS walls, including typical construction procedures and general construction guidelines. The number of GRS walls and abutments built to date is relatively low due to lack of understanding of GRS. While failure rate of GMSE has been estimated to be around 5%, failure of GRS has been found to be practically nil, with studies suggesting many advantages, including a smaller susceptibility to long-term creep and stronger resistance to seismic loads when well-compacted granular fill is employed. Geosynthetic Reinforced Soil (GRS) Walls will serve as an excellent guide or reference for wall projects such as transportation infrastructure—including roadways, bridges, retaining walls, and earth slopes—that are in dire need of repair and replacement in the U.S. and abroad. Covers both GRS and GMSE (MSE with geosynthetics as reinforcement); with much greater emphasis on GRS walls Showcases reinforcing mechanisms, engineering behavior, and design concepts of GRS and includes many step-by-step design examples Features information on typical construction procedures and general construction guidelines Includes hundreds of line drawings and photos Geosynthetic Reinforced Soil (GRS) Walls is an important book for practicing geotechnical engineers and structural engineers, as well as for advanced students of civil, structural, and geotechnical engineering.
Download or read book Climbing Anchors written by John Long and published by Rowman & Littlefield. This book was released on 2013-07-02 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely revised and updated edition with all new color photos brings together in a single volume the anchoring systems most popular among climbers. Most climbers today learn their craft on artificial climbing walls and on sport routes with fixed protection. Their first efforts to lead on trad routes often come as a rude shock--they find that they haven't the skills and training to safeguard the climb or to set up solid belays. This new edition of Climbing Anchors is the climber's complete and authoritative source of information on protection, from fundamental knots to sophisticated rigging and equalizing skills.
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 2001 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 15th European Conference on Soil Mechanics and Geotechnical Engineering written by A. Anagnostopoulos and published by IOS Press. This book was released on 2013-03-21 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication contains the papers presented at the 15th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE), held in Athens, Greece. Considerable progress has been made in recent decades in understanding the engineering behavior of those hard soils and weak rocks that clearly fall into either the field of soil or of rock mechanics, and there have been important developments in design and construction methods to cope with them. Progress would be even more desirable, however, for those materials which fall into the ‘grey’ area between soils and rocks. They present particular challenges due to their diversity, the difficulties and problems arising in their identification and classification, their sampling and testing and in the establishment of suitable models to adequately describe their behavior. The publication aims to provide an updated overview of the existing worldwide knowledge of the geological features, engineering properties and behavior of such hard soils and weak rocks, with particular reference to the design and construction methods and problems associated with these materials. Part 4 was published post-conference and includes Conference Reports.
Download or read book NexGen Technologies for Mining and Fuel Industries Volume I and II written by Pradeep K. Singh and published by Allied Publishers. This book was released on 2017-03-06 with total page 1562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in these two volumes were presented at the International Conference on “NexGen Technologies for Mining and Fuel Industries” [NxGnMiFu-2017] in New Delhi from February 15-17, 2017, organized by CSIR-Central Institute of Mining and Fuel Research, Dhanbad, India. The proceedings include the contributions from authors across the globe on the latest research on mining and fuel technologies. The major issues focused on are: Innovative Mining Technology, Rock Mechanics and Stability Analysis, Advances in Explosives and Blasting, Mine Safety and Risk Management, Computer Simulation and Mine Automation, Natural Resource Management for Sustainable Development, Environmental Impacts and Remediation, Paste Fill Technology and Waste Utilisation, Fly Ash Management, Clean Coal Initiatives, Mineral Processing and Coal Beneficiation, Quality Coal for Power Generation and Conventional and Non-conventional Fuels and Gases. This collection of contemporary articles contains unique knowledge, case studies, ideas and insights, a must-have for researchers and engineers working in the areas of mining technologies and fuel sciences.
