Download or read book Fundamentals of Electric Propulsion written by Dan M. Goebel and published by John Wiley & Sons. This book was released on 2008-12-22 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout most of the twentieth century, electric propulsion was considered the technology of the future. Now, the future has arrived. This important new book explains the fundamentals of electric propulsion for spacecraft and describes in detail the physics and characteristics of the two major electric thrusters in use today, ion and Hall thrusters. The authors provide an introduction to plasma physics in order to allow readers to understand the models and derivations used in determining electric thruster performance. They then go on to present detailed explanations of: Thruster principles Ion thruster plasma generators and accelerator grids Hollow cathodes Hall thrusters Ion and Hall thruster plumes Flight ion and Hall thrusters Based largely on research and development performed at the Jet Propulsion Laboratory (JPL) and complemented with scores of tables, figures, homework problems, and references, Fundamentals of Electric Propulsion: Ion and Hall Thrusters is an indispensable textbook for advanced undergraduate and graduate students who are preparing to enter the aerospace industry. It also serves as an equally valuable resource for professional engineers already at work in the field.
Download or read book Grid and Line 7 X 10 90 Pages 5mm Spacing Vol 3 written by Grid Book Grid Book N Journal and published by . This book was released on 2017-06-10 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Ideal Bullet Journal The idea behind Grid N Journal Dot Gird Collection is as simple as it is true : choose to journal, sketch, or take notes. Dot Gird Collection: contains Information, Content Page And Dot grid Each type of notebook comes in Six form factors, sized: 5"x8", 5.5"x8.5", 6"x9", 7"x10", 8"x10", and 8.5"x11". and14 Color Each Each page is a White-color and 60 pound weight. * 7 x 10 Inches - Paperback * 90 Grid and Line Pages * 5mm Spacing (5 dot per Inch) * dot 5 pt Light Grey * matte cover with solid color
Download or read book Handbook of Hydraulic Resistance written by I. E. Idelchik and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook has been composed on the basis of processing, systematization and classification of the results of a great number of investigations published at different time. The essential part of the book is the outcome of investigations carried out by the author. The present edition of this handbook should assist in increasing the quality and efficiency of the design and usage of indutrial power engineering and other constructions and also of the devices and apparatus through which liquids and gases move.
Download or read book Guide to LaTeX written by Helmut Kopka and published by Pearson Education. This book was released on 2003-11-25 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published Nov 25, 2003 by Addison-Wesley Professional. Part of the Tools and Techniques for Computer Typesetting series. The series editor may be contacted at [email protected]. LaTeX is the text-preparation system of choice for scientists and academics, and is especially useful for typesetting technical materials. This popular book shows you how to begin using LaTeX to create high-quality documents. The book also serves as a handy reference for all LaTeX users. In this completely revised edition, the authors cover the LaTeX2ε standard and offer more details, examples, exercises, tips, and tricks. They go beyond the core installation to describe the key contributed packages that have become essential to LaTeX processing. Inside, you will find: Complete coverage of LaTeX fundamentals, including how to input text, symbols, and mathematics; how to produce lists and tables; how to include graphics and color; and how to organize and customize documents Discussion of more advanced concepts such as bibliographical databases and BIBTeX, math extensions with AMS-LaTeX, drawing, slides, and letters Helpful appendices on installation, error messages, creating packages, using LaTeX with HTML and XML, and fonts An extensive alphabetized listing of commands and their uses New to this edition: More emphasis on LaTeX as a markup language that separates content and form--consistent with the essence of XML Detailed discussions of contributed packages alongside relevant standard topics In-depth information on PDF output, including extensive coverage of how to use the hyperref package to create links, bookmarks, and active buttons As did the three best-selling editions that preceded it, Guide to LaTeX, Fourth Edition, will prove indispensable to anyone wishing to gain the benefits of LaTeX. The accompanying CD-ROM is part of the TeX Live set distributed by TeX Users Groups, containing a full LaTeX installation for Windows, MacOSX, and Linux, as well as many extensions, including those discussed in the book. 0321173856B10162003
Download or read book The Mathematics of Diffusion written by John Crank and published by Oxford University Press. This book was released on 1979 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Though it incorporates much new material, this new edition preserves the general character of the book in providing a collection of solutions of the equations of diffusion and describing how these solutions may be obtained.
Download or read book Middle School Math with Pizzazz E Ratio and proportion Percent Statistics and graphs Probability Integers Coordinate graphing Equations written by Steve Marcy and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radio Meteorology written by Bradford R. Bean and published by . This book was released on 1966 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Natural Products from Marine Microorganisms written by Xian-Wen Yang and published by Frontiers Media SA. This book was released on 2020-01-22 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural products continue to serve as sources for the development of new medicines. There is currently a revival of interest in the discovery of bioactive compounds with new chemical structures from natural sources, largely due to the fact that synthetic libraries have not yielded the expected number of developmental candidates in the pharmaceutical industry during the last decade. In addition, the emergence of clinically relevant pathogens that are becoming increasingly resistant to currently used medicines strengthens the notion that natural product research is urgently required. Considering the fact that almost 10% of bioactive compounds are of microbial origin, and that marine microorganisms are relatively poorly studied compared to their terrestrial relatives, marine microorganisms are regarded as the most potential-laden resource for drug discovery.
Download or read book Methods for Measuring the Acute Toxicity of Effluents and Receiving Waters to Freshwater and Marine Organisms written by and published by DIANE Publishing. This book was released on 2002 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lunar Sourcebook written by Grant Heiken and published by CUP Archive. This book was released on 1991-04-26 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only work to date to collect data gathered during the American and Soviet missions in an accessible and complete reference of current scientific and technical information about the Moon.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Machine Drawing written by K. L. Narayana and published by New Age International. This book was released on 2009-06-30 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Book: Written by three distinguished authors with ample academic and teaching experience, this textbook, meant for diploma and degree students of Mechanical Engineering as well as those preparing for AMIE examination, incorporates the latest st
Download or read book Learning Japanese Hiragana and Katakana written by Kenneth G. Henshall and published by Tuttle Publishing. This book was released on 2013-12-20 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learning Hiragana and Katakana is a systematic and comprehensive Japanese workbook that is perfect for self-study or use in a classroom setting. Written Japanese combines three different types of characters: the Chinese characters known as kanji, and two Japanese sets of phonetic letters, hiragana and katakana, known collectively as kana, that must be mastered before the Japanese kanji can be learned. Learning Japanese Hiragana and Katakana provides beginning-level students of Japanese a thorough grounding in the basic hiragana and katakana phonetic symbols or syllabaries. A comprehensive introduction presents their primary function, origin, pronunciation and usage. The main body of the book is devoted to presenting the 92 hira and kata characters along with their variations, giving step-by-step guidelines on how to write each character neatly in the correct stroke order, with generous practice spaces provided for handwriting practice. This Japanese workbook includes: Systematic and comprehensive coverage of the two Japanese kana systems. Ample provision for Japanese kana practice, review, and self-testing at several levels Detailed reference section explaining the origin and function of kana, and the various kana combinations. Access to online Japanese audio files to aid in correct pronunciation. Helpful additional information for language students accustomed to romanized Japanese. Vocabulary selected for usefulness and cultural relevance. About this new edition: The new third edition has been expanded and revised to include many additional reading and writing exercises. Accompanying online recordings demonstrate the correct pronunciation of all the characters, vocabulary, and sentences in the book.
Download or read book Engineering Electromagnetics written by William H. Hayt, Jr and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Plasma Physics and Controlled Fusion written by Francis F. Chen and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: TO THE SECOND EDITION In the nine years since this book was first written, rapid progress has been made scientifically in nuclear fusion, space physics, and nonlinear plasma theory. At the same time, the energy shortage on the one hand and the exploration of Jupiter and Saturn on the other have increased the national awareness of the important applications of plasma physics to energy production and to the understanding of our space environment. In magnetic confinement fusion, this period has seen the attainment 13 of a Lawson number nTE of 2 x 10 cm -3 sec in the Alcator tokamaks at MIT; neutral-beam heating of the PL T tokamak at Princeton to KTi = 6. 5 keV; increase of average ß to 3%-5% in tokamaks at Oak Ridge and General Atomic; and the stabilization of mirror-confined plasmas at Livermore, together with injection of ion current to near field-reversal conditions in the 2XIIß device. Invention of the tandem mirror has given magnetic confinement a new and exciting dimension. New ideas have emerged, such as the compact torus, surface-field devices, and the EßT mirror-torus hybrid, and some old ideas, such as the stellarator and the reversed-field pinch, have been revived. Radiofrequency heat ing has become a new star with its promise of dc current drive. Perhaps most importantly, great progress has been made in the understanding of the MHD behavior of toroidal plasmas: tearing modes, magnetic Vll Vlll islands, and disruptions.
Download or read book Recommendations on the Transport of Dangerous Goods written by United Nations and published by . This book was released on 2020-01-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manual of Tests and Criteria contains criteria, test methods and procedures to be used for classification of dangerous goods according to the provisions of Parts 2 and 3 of the United Nations Recommendations on the Transport of Dangerous Goods, Model Regulations, as well as of chemicals presenting physical hazards according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). As a consequence, it supplements also national or international regulations which are derived from the United Nations Recommendations on the Transport of Dangerous Goods or the GHS. At its ninth session (7 December 2018), the Committee adopted a set of amendments to the sixth revised edition of the Manual as amended by Amendment 1. This seventh revised edition takes account of these amendments. In addition, noting that the work to facilitate the use of the Manual in the context of the GHS had been completed, the Committee considered that the reference to the "Recommendations on the Transport of Dangerous Goods" in the title of the Manual was no longer appropriate, and decided that from now on, the Manual should be entitled "Manual of Tests and Criteria".
Download or read book Lightning Protection Guide written by Dehn + Söhne (Neumarkt i.d. OPf.) and published by . This book was released on 2014 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
