Download or read book Great Western Small wheeled Double framed 4 4 0 Tender Locomotives written by David Maidment and published by . This book was released on 2017 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Great Western Small Wheeled Double Framed 4 4 0 Tender Locomotives written by David Maidment and published by Casemate Publishers. This book was released on 2017-02-14 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Great Western Railway experienced the trauma and disruption of the end of the broad gauge in 1892 and were faced with equipping the network with suitable motive power, especially in Devon and Cornwall where the last track conversion had taken place. West of Newton Abbot, the GWR had relied on a variety of 4-4-0, 2-4-0, 0-4-2 and 0-4-4 side and saddle tanks, often doubled-headed, and Dean set about designing a sturdy outside-framed powerful 4-4-0 with 5ft 8in coupled wheels, the 'Dukes', to tackle increasing loads over the heavily graded main line. Then, Churchward came to assist the ailing Locomotive Superintendent, using his knowledge and experience of American and continental practice to develop the Dean designs. He improved the efficiency and performance of the boilers, using the Belgian Belpaire firebox, then developed the tapered 'cone' boiler, and applied it to the chassis of the 'Duke's to form the 'Camel' class, later known as the 'Bulldogs', which eventually numbered 156 locomotives. Finally, in the 1930s when engines of the 'Duke' route availability were still required but their frames were life-expired, their boilers were matched with the stronger frames of the 'Bulldogs' to form the 'Dukedog' class, which lasted until the 1950s, particularly on the former Cambrian lines in mid-Wales. This book recounts the design, construction and operation of these small-wheeled outside-framed locomotives with many rare photos of their operation in the first decade of the twentieth century as well as in more recent times.
Download or read book Great Western Large Wheeled Outside Framed 4 4 0 Tender Locomotives written by David Maidment and published by Pen and Sword. This book was released on 2017-11-30 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers all the large wheeled outside frame classes of 4-4-0 tender Locomotives, that once ran on the Great Western Railway.The book has full details on each of the classes with good quality pictures, diagrams names, and number lists.This work is also very useful to model makers, giving full details of mechanical and livery changes that took place from the 1900s through to the early 1930, when all except the preserved 3440, City of Truro, were withdrawn and scrapped.
Download or read book London North Eastern Railway 4 4 0 Tender Locomotives written by David Maidment and published by Pen and Sword Transport. This book was released on 2024-11-30 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first volume on the LNER 4-4-0 locomotives describes the design, construction, history, operation and performance of the Great Northern, Great Central and Great Eastern examples, classified by the LNER at the Grouping as classes, D1 - D4, D5 - D12 and D13 - D16 respectively. It covers from their emergence in the late nineteenth century to their demise in the mid or late 1950s and their performance at their peak operation times, mainly in the inter-war years of LNER ownership. It also includes the former Midland & Great Northern Railway engines that were later absorbed by the LNER as classes D52 - D54.
Download or read book Great Western 0 6 0 Tender Goods Locomotive Classes written by David Maidment and published by Pen and Sword Transport. This book was released on 2024-07-30 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive history of all the 0-6-0 tender locomotives built by the Great Western Railway or by railways absorbed by the GWR from the very earliest broad gauge engines designed by Daniel Gooch to the Collett 2251 class of the 1930s some of which were still under construction at nationalisation. It includes the Joseph Armstrong ‘Standard Goods’ and the famous Dean Goods, many of which served overseas in the two world wars. The text of 40,000 words describes the design, construction and operation of eight GW and five ‘Absorbed’ broad gauge classes, and thirteen GW and thirteen ‘Absorbed’ standard gauge classes. The book has over 250 black and white and 30 color photos, weight diagrams and drawings.
Download or read book Four Coupled Tank Locomotive Classes Built by the Great Western Railway written by David Maidment and published by Pen and Sword Transport. This book was released on 2023-06-01 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive history of all twenty-six classes of four coupled tank engines commissioned by the Great Western Railway or built at their Wolverhampton and Swindon Works, from the Broad Gauge 2-4-0 and 4-4-0 tanks of the 1840s and 1850s to the well known Collett 0-4-2 branch line engines of classes 48XX (later renumbered 14XX) and 58XX of the 1930s. As well as the Broad Gauge engines, the strange looking ‘Covertibles’ of William Dean, a number of experimental ‘one-off’ designs, the numerous Wolverhampton 0-4-2Ts of the ‘517’ class and the Swindon built ‘2-4-0 ‘Metro Tanks’ are described with – where known – their allocation and operation. The book includes twenty weight diagrams and nearly 300 photographs, over 50 in color. The four-coupled tank engines absorbed by the Great Western from other companies at or before 1923 will be featured in a separate volume to follow.
Download or read book Four coupled Tank Locomotive Classes Absorbed by the Great Western Railway written by David Maidment and published by Pen and Sword Transport. This book was released on 2023-10-30 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive history of the four coupled tank engines absorbed by the Great Western Railway – locomotives of nine Broad Gauge companies, nineteen Standard Gauge companies, mainly in the South West which became part of the GWR between the 1870s and 1914, and a further eighteen companies, mainly in South Wales absorbed by the GWR in 1922 and 1923 at the formation of the ‘Big Four’ Grouping. The locomotives described and illustrated range from the 4-4-0 Broad Gauge saddle tanks of the South Devon and Bristol & Exeter Railways to the large 4-4-4 tank locomotives of the Midland & South Western Junction Railway, not forgetting the numerous and varied 0-4-0 pug saddle tanks of the Swansea Harbour Trust and the Powlesland & Mason company. The book includes thirty-two weight diagrams and nearly 200 photographs, many of exotic and rare locomotives.
Download or read book Great Western Castle Class 4 6 0 Locomotives 1923 1959 written by David Maidment and published by Pen and Sword Transport. This book was released on 2022-10-30 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Great Western Castles were one of the most successful locomotive designs of the twentieth century in terms of both performance and efficiency. Designed by Charles Collett in 1923, based on the 1907 Churchward Star class, 155 were constructed almost continuously, apart from the war years, between 1923 and 1950, in addition to fifteen rebuilt Stars and one rebuilt from the Great Bear pacific. Many were modernised with increased superheat and double-chimneys in the late 1950s and the class continued to be the mainstay of all Western Region express passenger services to the West Country, South Wales, Gloucestershire, Herefordshire and the West Midlands until replaced by the WR diesel hydraulic fleet in the early 1960s. This book covers their design in a chapter written by Bob Meanley, who masterminded the restoration at Tyseley Works of the Castles Earl of Mount Edgcumbe and Clun Castle, and their history, operation and performance from the high speed of the 1930s through to their rejuvenation in the 1950s, leaving experience of their last years and preservation to another volume. David Maidment had close experience of the class when working at Old Oak Common between 1957 and 1962 and includes his personal experiences there and on the road from his first encounter with one as a six-year old boy. The book includes 350 photographs, some 40 in color, and 23 detailed Swindon technical drawings.
Download or read book Great Western Castle Class 4 6 0 Locomotives The Final Years 1960 1965 written by David Maidment and published by Pen and Sword Transport. This book was released on 2023-02-16 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author’s second volume about the Great Western’s classic express locomotives covers their final six years in British Railways service. In 1960 the Castles, many now modernized with double chimneys and 4-row superheaters, were still in charge of most of the Western Region’s expresses, but by the summer of 1963 their regular express work was limited to the London – Worcester route. Their declining numbers in the last couple of years covered special summer and relief trains, parcels and freight work, deputizing for failed or unavailable diesels and a flurry of excursions and railtours where their prowess could still be demonstrated. The author worked and lived alongside them in these years and the book includes much of his own personal experience on the footplate, on their trains and on shed. The book recaps briefly their first 25 years and covers their history, operation and performance in their final years and is copiously illustrated including over 100 color photographs.
Download or read book Midland Railway and L M S 4 4 0 Locomotives written by David Maidment and published by Pen and Sword Transport. This book was released on 2021-12-30 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: David Maidment has unravelled the complex history of the Johnson, Deeley and Fowler 4-4-0 locomotives of the Midland Railway and its LMS successor, covering their design, construction, operation and performance in this book with over 400 black and white photographs. It recounts their working on the Midland main lines from St Pancras to Derby, Manchester, Leeds and Carlisle, the latter via the celebrated Settle & Carlisle line, and the later work of the Fowler LMS engines on the West Coast main line. The book also describes the history of the Midland 4-4-0s built for the Somerset & Dorset and Midland & Great Northern Railways. The book covers the period from the first Midland 4-4-0 built in 1876 to the last LMS 2P withdrawn in 1962 and includes performance logs, weight diagrams and dimensions and statistical details of each locomotive.
Download or read book Great Western Castle Class 4 6 0 Locomotives in the Preservation Era written by David Maidment and published by Pen and Sword Transport. This book was released on 2023-07-30 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third volume in the series on the Great Western Castle class locomotives focuses on the eight that have been preserved and goes into depth on the reconstruction of three of them, the two Tyseley ones, 5043 and 7029 described by Bob Meanley and Didcot’s 4079 recounted by David Maidment from the records of the Great Western Society, including the full story of 4079’s prolonged stay in Western Australia, its return to the UK and subsequent restoration. The history of all eight is covered and copiously illustrated, including over 100 color photographs, with many during the restoration work by Bob Meanley and in operation by David Maidment. The book includes records of their operation and performance since restoration when some of the most remarkable performances of these locomotives were achieved.
Download or read book The LMS Princess Coronation Pacifics The Final Years Preservation written by David Maidment and published by Pen and Sword Transport. This book was released on 2023-11-30 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book follows on from the author’s book on the Princess Coronation pacific locomotives from their construction in 1937 to their operation in 1956. It picks up from the story in 1957 with their operation and performance on the ‘Caledonian’, ‘Royal Scot’ and ‘Midday Scot’ accelerated services of the late 1950s, their continuing heavy work as dieselization of the West Coast mainline is implemented and the sudden withdrawal of the remaining examples at the end of the 1964 summer timetable. Included are the author’s personal experiences and photographs and the descriptions by three Crewe men who fired these engines on the heavy overnight Crewe – Perth sleeper services in the late 1950s, two of whom, Les Jackson and Bill Andrew, drove 6229 and 6233 in the preservation era. As well as their stories of their experiences in BR days, they describe runs with the preserved locomotives and have included photographs from their personal collections. Crewe Works fitter, Keith Collier includes his experiences of their maintenance and the author in conclusion compares them with the finest steam locomotives of France, Germany and the USA.
Download or read book Great Western 0 6 2 Tank Classes written by David Maidment and published by Pen and Sword Transport. This book was released on 2020-07-30 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: After tackling the GW pannier tanks in his ‘Locomotive Portfolios’ for Pen & Sword, author David Maidment seeks out descriptions and photographs of the GW 0-6-2 tank engines, the majority of which were built by the Rhymney, Taff Vale, Barry and other Welsh railways from the last decade or so of the nineteenth century onwards. The engines of eight different companies, absorbed by the GWR in 1922, are described and illustrated, and the way in which many were modernised and rebuilt at Swindon or Caerphilly Works in the 1920s. Charles Collett was, however, faced with a motive power crisis in the mining valleys at the Grouping, as many of the companies had economised on essential maintenance as the GW’s take-over drew near, and he had to hurriedly design a standard 0-6-2T to complement and bolster their work as the powerful GW 2-8-0Ts were too heavy and wide for many of the Cardiff valleys. These engines, the 56XX & 66XX classes, became part of the South Wales scene between 1925 and 1964, mainly running the coal traffic between pits and docks, although they dominated Cardiff Valley passenger services until the influx of BR 3MT 2-6-2Ts and GW 41XX 2-6-2Ts in 1954/5. The book has nearly 40,000 words of text and around 300 black & white photographs.
Download or read book Great Western Grange Class Locomotives written by David Maidment and published by Pen and Sword. This book was released on 2019-03-30 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: The renowned British railroad historian delivers “a well-illustrated account of the rationale behind Collett’s construction of this 80 strong class” (West Somerset Railway Association). English railway engineer George Jackson Churchward proposed a 5ft 8in wheeled 4-6-0 for mixed traffic duties in 1901 and it was seriously considered in 1905, but it took until 1936 before his successor, Charles Collett, realized the plan by persuading the GWR Board to replace many of the 43XX moguls with modern standard mixed traffic engines that bore a remarkable likeness to the Churchward proposal. David Maidment has written another in his series of “Locomotive Portfolios” for Pen & Sword to coincide with the construction of a new “Grange” at Llangollen from GW standard parts to fill the gap left by the total withdrawal and scrapping of one of that railway’s most popular classes—to their crews at the very least. As well as covering the type’s design and construction, the author deals comprehensively with the allocation and operation of the eighty locomotives and in particular has researched their performance and illustrated it with many examples of recorded logs from the 1930s as well as in more recent times. As in previous volumes, the author has added his own personal experiences with the engines and has sourced more than 250 photos, over 40 of which are in color. “Superbly researched . . . another extraordinary and unreservedly recommended addition to . . . British Railroading History collections.” —Midwest Book Review “Granges worked off-region quite widely, so this is not just a book for the copper-capped chimney brigade; enthusiasts for whom these capable machines are favorites will definitely want this volume on the bookshelf.” —Railway Modeller
Download or read book Great Western Star Class Locomotives written by Laurence Waters and published by Pen and Sword. This book was released on 2017-04-30 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed by G.J. Churchward, no. 40 was constructed at Swindon in April 1906. It was Swindons first 4 cylinder simple engine and was the forerunner of Churchwards famous 4 cylinder Star Class 4-6-0s. Initially built as a 4-4-2 Atlantic, no. 40 was named North Star in September 1906, rebuilt as a 4-6-0 in 1909, and renumbered 4000 in 1913. Including no. 40, the Star class eventually numbered seventy-three locomotives, all built at Swindon in batches between 1906 and 1923. In service the Stars proved to be both free-running and reliable locomotives, and for many years were used to haul the Great Westerns top link services, including the world-famous Cornish Riviera Express. The introduction of the Collett Castle Class 4-6-0s in 1923, and the King Class 4-6-0s in 1927, saw the Stars relegated to secondary passenger, freight and parcels services. A number of Stars were rebuilt by Collett as Castles, including the prototype no. 4000 North Star, but the remaining Stars continued to give good service. At Nationalisation in 1948, no less than forty-seven of these fine locomotives passed into Western Region ownership, the last example, no. 4056 Princess Margaret, being withdrawn in October 1957. In this book, Laurence Waters charts the history of the class from the prototype, right through to the final workings in October 1957. Using many previously unpublished photographs from the Great Western Trust photographic collection, accompanied by informative captions, every member of the Class is illustrated. This book should appeal to those interested in the history of Great Western locomotive development as well as modellers of the Great Western and Western Region.
Download or read book An Introduction to Great Western Locomotive Development written by Jim Champ and published by Pen and Sword. This book was released on 2018-02-28 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first thought, when contemplating a new study of the Great Western Railway locomotive fleet, must surely be to ask what can there be left to say? But there is no single source which gives a general introduction to the Great Western locomotive fleet. There are monographs on individual classes, an excellent multi-volume detail study from the RCTS, and superb collections of photographs, but nothing that brings it all together. This work is intended to provide that general introduction.The volume begins with a series of short essays covering general trends in design development, whilst the main body of the volume covers individual classes. For each class there is a small table containing some principal dimensions and paragraphs of text, covering an introduction, renumbering, key changes in the development of the class and information on withdrawal.The volume concludes with appendices covering the development and types of standard boilers, the various numbering schemes used by the GWR, the arcane subject of locomotive diagrams and lot numbers, and a short reference on the many lines the GWR engulfed.The majority of illustrations are new profile drawings to a consistent format. Described as sketches, they are drawn to a consistent scale, but do not claim to be scale drawings. Much minor equipment has been omitted and the author has certainly not dared to include rivets! Although most are based around GWR weight diagrams, they are not simple traces of the original drawings. Detail has been added from other sources, components copied from different drawings and details have been checked against historical and modern photographs. One must also bear in mind that steam locomotives were not mass produced. Minor fittings frequently varied in position and changes were made over the locomotives' lifetimes. Nevertheless, this collection of drawings provides a uniquely consistent view of the GWR locomotive fleet.
Download or read book The Engineer written by and published by . This book was released on 1858 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
