Download or read book Cast Iron Technology written by Roy Elliott and published by Butterworth-Heinemann. This book was released on 1988-04-18 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cast Iron Technology presents a critical review of the nature of cast irons. It discusses the types of cast iron and the general purpose of cast irons. It also presents the history of the iron founding industry. Some of the topics covered in the book are the description of liquid metal state; preparation of liquid metal; process of melting; description of cupola melting and electric melting methods; control of composition of liquid metal during preparation; description of primary cast iron solidification structures; and thermal analysis of metals to determine its quality. Solidification science and the fundamentals of heat treatment are also discussed. An in-depth analysis of the hot quenching techniques is provided. The graphitization potential of liquid iron is well presented. A chapter is devoted to microstructural features of cast iron. The book can provide useful information to iron smiths, welders, students, and researchers.

Download or read book Microstructure and Properties of Ductile Iron and Compacted Graphite Iron Castings written by Mariusz Holtzer and published by Springer. This book was released on 2015-03-27 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the surface effects at the interface boundary of metal/sand moulds, and their influence on the surface quality, microstructure and mechanical and anticorrosive properties of high-quality cast iron. It explores utilitarian aspects of the production of high-quality cast iron castings, including thin-walled castings of high-quality cast iron alloys, and examines problems related to the determination of moulding sands and reclaim quality, and their influence on castings. Presenting new material, this book takes into account the influence of metal quality, pouring temperature, solidification time, the quality of moulding sand with the reclaim application, as well the binders of moulding sands, on the formation of the degenerated graphite near surface layers. It also employs the latest research methods, such as a wavelength-dispersive spectrometer (WDS) analysis and thermodynamic calculations, which were carried out on the reactions occurring in the study area. Providing a valuable resource to academics and researchers interested in materials science, metal casting and metallurgy, this book is also intended for metal industry professionals.

Download or read book Ductile Iron Handbook written by Al Alagarsamy and published by . This book was released on 1992 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Physical Metallurgy of Cast Iron written by I. Minkoff and published by John Wiley & Sons. This book was released on 1983 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Foseco Ferrous Foundryman s Handbook written by John Brown and published by Elsevier. This book was released on 2000-08-01 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Foseco Ferrous Foundryman's Handbook is a practical reference book for all those concerned with making castings in any of the commonly used alloys, by any of the usual moulding methods. International SI units are used throughout, but in almost all cases conversions to the more familiar Metric and Imperial units are given. Wherever possible, Casting Alloy Specifications include equivalent specifications for several countries as well as international specifications. Individual chapters cover the casting of light alloys, copper-based alloys, all types of cast-iron and steel. For each group of alloys, specifications and typical applications are described, together with details of melting practice, metal treatment and casting practice. Sand moulding materials, including green sand and chemically bonded sands are also included.

Download or read book Light Alloys written by Ian Polmear and published by Elsevier. This book was released on 2005-11-11 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive overview of the science and metallurgy of aluminum, magnesium, titanium and beryllium alloys, this is the only book available covering the background materials science, properties, manufacturing processes and applications of these key engineering metals in a single accessible volume. Use of these metals is now more widespread than ever, and they are routinely found in motor vehicles and aircraft. New material includes materials characteristics and applications; heat treatment properties; fabrication; microstructure/property relationships; new applications and processes. The definitive single volume overview New material on processing, characteristics and applications of these essential metals Covers the latest applications and processes in the auto and aero industries

Download or read book Applied Welding Engineering written by Ramesh Singh and published by Elsevier. This book was released on 2011-11-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: While there are several books on market that are designed to serve a company's daily shop-floor needs. Their focus is mainly on the physically making specific types of welds on specific types of materials with specific welding processes. There is nearly zero focus on the design, maintenance and troubleshooting of the welding systems and equipment. Applied Welding Engineering: Processes, Codes and Standards is designed to provide a practical in-depth instruction for the selection of the materials incorporated in the joint, joint inspection, and the quality control for the final product. Welding Engineers will also find this book a valuable source for developing new welding processes or procedures for new materials as well as a guide for working closely with design engineers to develop efficient welding designs and fabrication procedures. Applied Welding Engineering: Processes, Codes and Standards is based on a practical approach. The book's four part treatment starts with a clear and rigorous exposition of the science of metallurgy including but not limited to: Alloys, Physical Metallurgy, Structure of Materials, Non-Ferrous Materials, Mechanical Properties and Testing of Metals and Heal Treatment of Steels. This is followed by self-contained sections concerning applications regarding Section 2: Welding Metallurgy & Welding Processes, Section 3: Nondestructive Testing, and Section 4: Codes and Standards. The author's objective is to keep engineers moored in the theory taught in the university and colleges while exploring the real world of practical welding engineering. Other topics include: Mechanical Properties and Testing of Metals, Heat Treatment of Steels, Effect of Heat on Material During Welding, Stresses, Shrinkage and Distortion in Welding, Welding, Corrosion Resistant Alloys-Stainless Steel, Welding Defects and Inspection, Codes, Specifications and Standards. The book is designed to support welding and joining operations where engineers pass plans and projects to mid-management personnel who must carry out the planning, organization and delivery of manufacturing projects. In this book, the author places emphasis on developing the skills needed to lead projects and interface with engineering and development teams. In writing this book, the book leaned heavily on the author's own experience as well as the American Society of Mechanical Engineers (www.asme.org), American Welding Society (www.aws.org), American Society of Metals (www.asminternational.org), NACE International (www.nace.org), American Petroleum Institute (www.api.org), etc. Other sources includes The Welding Institute, UK (www.twi.co.uk), and Indian Air force training manuals, ASNT (www.asnt.org), the Canadian Standard Association (www.cas.com) and Canadian General Standard Board (CGSB) (www.tpsgc-pwgsc.gc.ca). - Rules for developing efficient welding designs and fabrication procedures - Expert advice for complying with international codes and standards from the American Welding Society, American Society of Mechanical Engineers, and The Welding Institute(UK) - Practical in-depth instruction for the selection of the materials incorporated in the joint, joint inspection, and the quality control for the final product.

Download or read book Advanced Casting Technologies written by Dr.T.R Vijayaram and published by BoD – Books on Demand. This book was released on 2018-05-02 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Major casting processing advancements have been made in experimental and simulation areas. Newly developed advanced casting technologies allow foundry researchers to explore detailed phenomena associated with new casting process parameters helping to produce defect-free castings with good quality. Moreover, increased computational power allows foundry technologists to simulate advanced casting processes to reduce casting defects. In view of rapid expansion of knowledge and capability in the exciting field of casting technology, it is possible to develop new casting techniques. This book is intended to discuss many casting processing technologies. It is devoted to advanced casting processing technologies like ductile casting production and thermal analysis, casting of metal matrix composites by vortex stir casting technique, aluminum DC casting, evaporative casting process, and so on. This book entitled Advanced Casting Technologies has been organized into seven chapters and categorized into four sections. Section 1 discusses the production of ductile iron casting and thermal analysis. Section 2 depicts aluminum casting. Section 3 describes the casting manufacturing aspects of functionally graded materials and evaporative casting process. Section 4 explains about the vortex stir casting technique to process metal matrix composite castings. All the chapters discussed in detail the processing steps, process parameters involved in the individual casting technique, and also its applications. The goal of the book is to provide details on the recent casting technologies.

Download or read book Science and Engineering of Casting Solidification written by Doru Michael Stefanescu and published by Springer. This book was released on 2016-10-22 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this popular textbook covers current topics in all areas of casting solidification. Partial differential equations and numerical analysis are used extensively throughout the text, with numerous calculation examples, to help the reader in achieving a working knowledge of computational solidification modeling. The features of this new edition include: • new chapters on semi-solid and metal matrix composites solidification • a significantly extended treatment of multiscale modeling of solidification and its applications to commercial alloys • a survey of new topics such as solidification of multicomponent alloys and molecular dynamic modeling • new theories, including a theory on oxide bi-films in the treatment of shrinkage problems • an in-depth treatment of the theoretical aspects of the solidification of the most important commercial alloys including steel, cast iron, aluminum-silicon eutectics, and superalloys • updated tables of material constants.

Download or read book Science and Technology of Casting Processes written by Malur Srinivasan and published by BoD – Books on Demand. This book was released on 2012-09-26 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with various science and technology factors that need careful consideration in producing a casting. It consists of 11 chapters contributed by experts in their respective fields. The topics include simulation of continuous casting process, control of solidification of continuous castings, influence of mold flux in continuous casting, segregation in strip casting of steel, developments in shell and solid investment mold processes, innovative pressure control during filling of sand molds, fracture toughness specifically of castings, permanent molding of cast iron, wear resistant castings and improvement of accuracy in estimating graphite nodularity in ductile iron castings.

Download or read book Non metallic Inclusions in Steel written by Roland Kiessling and published by . This book was released on 1978 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Structure of Cast Iron written by Alfred Boyles and published by . This book was released on 1947 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metalworking Fluids MWFs for Cutting and Grinding written by V P Astakhov and published by Elsevier. This book was released on 2012-01-31 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal working fluids (MWFs) provide important functions such as lubrication and cooling in the machining of metals. This book reviews the issues surrounding the use of fluids for cutting and grinding throughout the metal working process, from selection and testing to disposal.The book opens with chapters considering the mechanism and action, selection and delivery of MWFs to the machining zone before moving onto discuss the many issues surrounding MWFs during machining such as selection of the proper MWF, environmental concerns, supply methods, circulation and monitoring. The final chapters discuss the maintenance, replacement and disposal of MWFs.With its distinguished editors and international team of expert contributors, Metalworking fluids (MWFs) for cutting and grinding is an invaluable reference tool for engineers and organizations using metal cutting/machining in the manufacturing process as well as machine designers/manufacturers and machining fluid/chemical suppliers. - Chapters consider the mechanism and action, selection and delivery of MWFs to the machining zone - Environmental concerns, supply methods, circulation and monitoring are also discussed - Written by distinguished editors and international team of expert contributors

Download or read book Microstructure of Steels and Cast Irons written by Madeleine Durand-Charre and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises three parts. Part 1 gives a historical description of the development of ironworking techniques since the earliest times. Part 2 is the core of the book and deals with the metallurgical basis of microstructures, with four main themes: phase diagrams, solidification processes, diffusion, and solid state phase transformations. Part 3 begins by an introduction to steel design principles. It then goes on to consider the different categories of steels, placing emphasis on their specific microstructural features. Finally, a comprehensive reference list includes several hundred pertinent articles and books. The book is the work of a single author, thus ensuring uniformity and concision. It is intended for scientists, metallurgical engineers and senior technicians in research and development laboratories, design offices and quality departments, as well as for teachers and students in universities, technical colleges and other higher education establishments.

Download or read book Experiments in Hot Rolling and Forging of Ductile Cast Iron written by L. A. Neumeier and published by . This book was released on 1980 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1996-01-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cast iron offers the design engineer a low-cost, high-strength material that can be easily cast into a wide variety of useful, and sometimes complex, shapes. This handbook from ASM covers the entire spectrum of one of the most widely used and versatile of all metals.