Download or read book Graphical Handbook for Reinforced Concrete Design Classic Reprint written by John Hawkesworth and published by . This book was released on 2015-07-02 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Graphical Handbook for Reinforced Concrete Design In this work, there is presented a series of plates, showing graphically, by means of plotted curves, the required design for slabs, beams, and columns, under various conditions of external loading, together with practical examples explaining the method of using each plate. The design for most of the more commonly occurring forms of reinforced concrete construction may be ascertained directly from these plates, without performing any of the computations ordinarily required. While practically nothing more than an inspection of the plates is needed to select a design for given conditions, nothing is sacrificed in the way of flexibility by the graphical method, but, on the contrary, an exceptionally wide range of choice is afforded as to the relative proportions of steel and concrete to be used. The unit stresses prescribed by the Building Code of New York City have been adopted throughout, as a standard, and it is believed that the methods here used are those sanctioned by the best practice at the present time. This book is expected to appeal chiefly to those architects and engineers whose work in reinforced concrete design is intermittent in its nature, and does not warrant the steady employment of a "concrete engineer." In such offices, the use of a graphical handbook should render it unnecessary to call in expert assistance to solve the majority of problems ordinarily encountered. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Graphical Handbook for Reinforced Concrete Design written by John Hawkesworth and published by . This book was released on 1906 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book GRAPHICAL HANDBOOK FOR REINFORCED CONCRETE DESIGN written by JOHN. HAWKESWORTH and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Graphical Handbook for Reinforced Concrete Design written by John Hawkesworth and published by Palala Press. This book was released on 2016-05-24 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Graphical Handbook for Reinforced Concrete Design Primary Source Edition written by John Hawkesworth and published by Nabu Press. This book was released on 2014-02 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reproduction of a book published before 1923. This book may have occasional imperfections such as missing or blurred pages, poor pictures, errant marks, etc. that were either part of the original artifact, or were introduced by the scanning process. We believe this work is culturally important, and despite the imperfections, have elected to bring it back into print as part of our continuing commitment to the preservation of printed works worldwide. We appreciate your understanding of the imperfections in the preservation process, and hope you enjoy this valuable book.
Download or read book A Handbook on Reinforced Concrete written by F. D. Warren and published by Forgotten Books. This book was released on 2017-11-10 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from A Handbook on Reinforced Concrete: For Architects, Engineers, and Contractors The book is divided into four parts: Part I gives a general but concise résumé of the subject from a practical standpoint, bringing out some of the difficulties met with in practice, and suggest ing remedies. Under Part II is compiled a series of tests justifying the use of various constants and coefficients in preparing the tables under Part III, as well as bearing out the theory of elasticity. Part III contains a series of tables from which it is hoped the designer may obtain all necessary information to meet the more common cases in practice. It was not intended to cover the more intricate designs, as this is a feature that requires considerable thought and time, both of which may be profitably-applied. Part IV treats of the de sign of trussed roofs from a practical standpoint. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Graphical Methods in Reinforced Concrete Design A Thesis Classic Reprint written by Samuel Klein and published by Forgotten Books. This book was released on 2018-04-26 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Graphical Methods in Reinforced Concrete Design: A Thesis It follows that in a reinforced beam, the steel is placed on the tension side. The following discussion applies to this simple case, the beam being rectangular in sec tion, and the steel reinforcement being placed in the tension side in the form of rods or bars as shown in Fig.2. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Concrete Designers Manual written by George A. Hool and published by . This book was released on 2015-09-27 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Concrete Designers' Manual: Tables and Diagrams for the Design of Reinforced Concrete Structures The tables and diagrams presented in this manual make possible the rapid designing of reinforced concrete structures in accordance with the Joint Committee Recommendations, the American Concrete Institute Recommendations, the New York Building Code Requirements and the Chicago Building Code Requirements. Some of these tables and diagrams will also be found of such a general nature that they can be used when the designing requirements are different from any of those mentioned. No tables are presented based on the flat slab recommendations of the Joint Committee as these recommendations are so conservative that they are not used to any extent. The authors have for some time been preparing and using in their practice various tables and diagrams in order to finally obtain complete data in the most, convenient form and of the greatest value to the majority of designing engineers. The collection given in this book is the result. No attempt has been made to develop theory or to duplicate information not directly relating to concrete design which can conveniently be found in other handbooks possessed by all designers. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Concrete Designers Manual Tables and Diagrams for the Design of Reinforced Concrete Structures written by George A Hool and published by Legare Street Press. This book was released on 2022-10-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Graphical Handbook for Reinforced Concrete Design written by John HAWKESWORTH (C.E.) and published by . This book was released on 1907 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reinforced Concrete written by John P. Brooks and published by Forgotten Books. This book was released on 2017-10-15 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Reinforced Concrete: Mechanics and Elementary Design As a guide to the selection of proper constants in design ing, much of the report of the Joint Committee is given without change, and frequent references to the same are made throughout the book. The nomenclature is, usually, made up of initials of the words indicated, and for this reason it was thought best to use St rather than f, for the tensile stress in the steel. In general, the nomenclature is that in common use. Several designs of reinforced concrete structures are worked out in detail with particular reference to the proper sequence of computation. The principles of economy in design are set forth and the diagrams in use lead to the proper selection of steel and concrete dimensions. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Reinforced Concrete Design Classic Reprint written by Oscar Faber and published by Forgotten Books. This book was released on 2017-11-24 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Reinforced Concrete Design Two concentrated loads at the third points, slope at the ends given. Uniform load, beam monolithic with columns. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book A Hand Book of Design written by Consolidated Expanded Metal Companies and published by Forgotten Books. This book was released on 2017-11-03 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from A Hand-Book of Design: Containing Tables, Standards and Useful Information Appertaining to the "Steelcrete" System of Reinforced Concrete Before taking up the distinctive features of advantage it is necessary to describe just what is meant when we speak of Steelcrete Expanded Metal. Notwithstanding its wide application, it is not uncommon to find many engineers and users of this metal who are ignorant of the mean ing of the term. Owing to the fact that in recent years imitations have appeared to injure its good name, it is now necessary to clearly draw the line between the true and the false product that purchasers may be able to clearly distinguish and appreciate the difference. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Reinforced Concrete Designer s Handbook written by Charles E. Reynolds and published by CRC Press. This book was released on 2007-08-07 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic and essential work has been thoroughly revised and updated in line with the requirements of new codes and standards which have been introduced in recent years, including the new Eurocode as well as up-to-date British Standards. It provides a general introduction along with details of analysis and design of a wide range of structures and examination of design according to British and then European Codes. Highly illustrated with numerous line diagrams, tables and worked examples, Reynolds's Reinforced Concrete Designer's Handbook is a unique resource providing comprehensive guidance that enables the engineer to analyze and design reinforced concrete buildings, bridges, retaining walls, and containment structures. Written for structural engineers, contractors, consulting engineers, local and health authorities, and utilities, this is also excellent for civil and architecture departments in universities and FE colleges.
Download or read book Elementary Reinforced Concrete Building Design Classic Reprint written by Leonard C. Urquhart and published by Forgotten Books. This book was released on 2017-11-28 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Elementary Reinforced Concrete Building Design The following pages are intended to furnish the computing side of an elementary course in reinforced concrete construction and to supplement a text book used in the class room. The references made to Diagrams and Tables are to those of Reinforced Concrete Construction, Volume I, by George A. Hool. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Reinforced Concrete written by Ernest McCullough and published by Forgotten Books. This book was released on 2017-11-24 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Reinforced Concrete: A Manual of Practice This book is intended to be what its title indicates, A Manual of Practice. The intention in the sections on design has been to keep within the usual requirements of the ordinary conservative building ordinances of American cities. This explains the use of the straight line formulas for stress and the limitations imposed by the employment of working stresses. The ambitious designer wishing to learn more of the theory of the subject and the design of higher structures can go to the larger standard treatises and have nothing to unlearn. So far as construction is concerned, the principles stated herein as the result of personal experience, apply to all manner of work in reinforced concrete, and to this extent the -book should be of some value to a large number of men. Good work manship implies no knowledge of, or dependence upon, theory of design. It simply calls for the exercise of common sense, unremitting vigilance and care on the part of the man in charge, a willingness to learn from every intelligent workman on the job, and the kind of pride that takes honestly to heart the les sons of experience. The motto, if the manager is the sort of man who believes in mottoes, is Do not forget! If the manager, however, does not know something about the theory of design, then the owner is taking great chances. The man in charge should be an engineer. The writer feels the preface would be incomplete unless he acknowledged here the assistance given him by his son George Seymour Mccullough in checking and recalculating the tables, many of them original. The work was at times irksome, and we trust no errors will be discovered. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Graphical Methods in Reinforced Concrete Design Primary Source Edition written by Samuel Klein and published by Nabu Press. This book was released on 2014-01 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reproduction of a book published before 1923. This book may have occasional imperfections such as missing or blurred pages, poor pictures, errant marks, etc. that were either part of the original artifact, or were introduced by the scanning process. We believe this work is culturally important, and despite the imperfections, have elected to bring it back into print as part of our continuing commitment to the preservation of printed works worldwide. We appreciate your understanding of the imperfections in the preservation process, and hope you enjoy this valuable book.