Download or read book Graphene Nanostructures written by Yaser M. Banadaki and published by CRC Press. This book was released on 2019-07-16 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tremendous innovations in electronics and photonics over the past few decades have resulted in the downsizing of transistors in integrated circuits, which are now approaching atomic scales. This will soon result in the creation of a growing knowledge gap between the underlying technology and state-of-the-art electronic device modeling and simulations. This book bridges the gap by presenting cutting-edge research in the computational analysis and mathematical modeling of graphene nanostructures as well as the recent progress on graphene transistors for nanoscale circuits. It inspires and educates fellow circuit designers and students in the field of emerging low-power and high-performance circuit designs based on graphene. While most of the books focus on the synthesis, fabrication, and characterization of graphene, this book shines a light on graphene models and their circuit simulations and applications in photonics. It will serve as a textbook for graduate-level courses in nanoscale electronics and photonics design and appeal to anyone involved in electrical engineering, applied physics, materials science, or nanotechnology research.
Download or read book Graphene Carbon Nanotubes and Nanostructures written by James E. Morris and published by CRC Press. This book was released on 2017-07-28 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene, Carbon Nanotubes, and Nanostructures: Techniques and Applications offers a comprehensive review of groundbreaking research in nanofabrication technology and explores myriad applications that this technology has enabled. The book examines the historical evolution and emerging trends of nanofabrication and supplies an analytical understanding of some of the most important underlying nanofabrication technologies, with an emphasis on graphene, carbon nanotubes (CNTs), and nanowires. Featuring contributions by experts from academia and industry around the world, this book presents cutting-edge nanofabrication research in a wide range of areas. Topics include: CNT electrodynamics and signal propagation models Electronic structure calculations of a graphene–hexagonal boron nitride interface to aid the understanding of experimental devices based on these heterostructures How a laser field would modify the electronic structure and transport response of graphene, to generate bandgaps The fabrication of transparent CNT electrodes for organic light-emitting diodes Direct graphene growth on dielectric substrates, and potential applications in electronic and spintronic devices CNTs as a promising candidate for next-generation interconnect conductors CMOS–CNT integration approaches, including the promising localized heating CNT synthesis method CNTs in electrochemical and optical biosensors The synthesis of diamondoids by pulsed laser ablation plasmas generated in supercritical fluids, and possible applications The use of DNA nanostructures in lithography CMOS-compatible silicon nanowire biosensors The use of titanium oxide-B nanowires to detect explosive vapors The properties of protective layers on silver nanoparticles for ink-jet printing Nanostructured thin-film production using microreactors A one-stop reference for professionals, researchers, and graduate students working in nanofabrication, this book will also be useful for investors who want an overview of the current nanofabrication landscape.
Download or read book Synthesis and Characterization of ZnO Graphene Nanostructures for Electronics and Photocatalysis written by Seyed Ebrahim Chalangar and published by Linköping University Electronic Press. This book was released on 2021-04-08 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent rapid development of electronics and electro-optical devices demands affordable and reliable materials with enhanced performance. Forming nanocomposites of already well-known materials is one possible route towards novel functional materials with desirable synergistic enhanced properties. Incompatible chemical properties, mismatched crystal structures and weak bonding interactions between the substances, however, often limit the number of possible nanocomposites. Moreover, using an inexpensive, facile, large-area and flexible fabrication technique is crucial to employ the new composites in industrially viable applications. This thesis focuses on the synthesis and characterization of different zinc oxide/graphene (ZnO/GR) nanocomposites, well suited for optoelectronics and photocatalysis applications. Two different approaches of i) substrate-free random synthesis, and ii) template-assisted selective area synthesis were studied in detail. In the first approach, ZnO nanoparticles/rods were grown on GR. The obtained nanocomposites were investigated for better GR dispersity, electrical conductivity and optical properties. Besides, by adding silver iodide to the nanocomposite, an enhanced plasmonic solar-driven photocatalyst was synthesized and analyzed. In the second approach, arrays of single, vertically aligned ZnO nanorods were synthesized using a colloidal lithography-patterned sol-gel ZnO seed layer. Our demonstrated nanofabrication technique with simple, substrate independent, and large wafer-scale area compatibility improved the alignment and surface density of ZnO nanorods over large selective growth areas. Eventually, we found a novel method to further enhance the vertical alignment of the ZnO nanorods by introducing a GR buffer layer between the Si substrate and the ZnO seed layer, together with the mentioned patterning technique. The synthesized nanocomposites were analyzed using a large variety of experimental techniques including electron microscopy, photoelectron spectroscopy, x-ray diffraction, photoluminescence and cathodoluminescence spectroscopy for in-depth studies of their morphology, chemical and optical properties. Our findings show that the designed ZnO/GR nanocomposites with vertically aligned ZnO nanorods of high crystalline quality, synthesized with the developed low-cost nanofabrication technique, can lead to novel devices offering higher performance at a significantly lower fabrication cost.
Download or read book Two Dimensional Nanostructures for Biomedical Technology written by Raju Khan and published by Elsevier. This book was released on 2019-11-05 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two Dimensional Nanostructures for Biomedical Technology: A Bridge between Materials Science and Bioengineering helps researchers to understand the promising aspects of two dimensional nanomaterials. Sections cover the biomedical applications of such nanostructures in terms of their precursors, structures, morphology and size. Further, detailed synthetic methodologies guide the reader towards the efficient generation of two dimensional nanostructures. The book encompasses the vital aspects of two dimensional nanomaterials in context of their utility in biomedical technology, thus presenting a thorough guide for researchers in this area. Details the latest on the structure, morphology and shape-size accords of two dimensional nanomaterials Includes synthetic strategies with feasibility for sustainability Reports on two dimensional nanostructures in biomedical technology, including bio-imaging, biosensing, drug delivery and tissue engineering
Download or read book Graphene Carbon Nanotubes and Nanostructures written by James E. Morris and published by CRC Press. This book was released on 2017-07-28 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene, Carbon Nanotubes, and Nanostructures: Techniques and Applications offers a comprehensive review of groundbreaking research in nanofabrication technology and explores myriad applications that this technology has enabled. The book examines the historical evolution and emerging trends of nanofabrication and supplies an analytical understanding of some of the most important underlying nanofabrication technologies, with an emphasis on graphene, carbon nanotubes (CNTs), and nanowires. Featuring contributions by experts from academia and industry around the world, this book presents cutting-edge nanofabrication research in a wide range of areas. Topics include: CNT electrodynamics and signal propagation models Electronic structure calculations of a graphene–hexagonal boron nitride interface to aid the understanding of experimental devices based on these heterostructures How a laser field would modify the electronic structure and transport response of graphene, to generate bandgaps The fabrication of transparent CNT electrodes for organic light-emitting diodes Direct graphene growth on dielectric substrates, and potential applications in electronic and spintronic devices CNTs as a promising candidate for next-generation interconnect conductors CMOS–CNT integration approaches, including the promising localized heating CNT synthesis method CNTs in electrochemical and optical biosensors The synthesis of diamondoids by pulsed laser ablation plasmas generated in supercritical fluids, and possible applications The use of DNA nanostructures in lithography CMOS-compatible silicon nanowire biosensors The use of titanium oxide-B nanowires to detect explosive vapors The properties of protective layers on silver nanoparticles for ink-jet printing Nanostructured thin-film production using microreactors A one-stop reference for professionals, researchers, and graduate students working in nanofabrication, this book will also be useful for investors who want an overview of the current nanofabrication landscape.
Download or read book Graphene Science Handbook written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2016-04-21 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the Low Resistivity, High Mobility, and Zero Bandgap of Graphene The Graphene Science Handbook is a six-volume set that describes graphene’s special structural, electrical, and chemical properties. The book considers how these properties can be used in different applications (including the development of batteries, fuel cells, photovoltaic cells, and supercapacitors based on graphene) and produced on a massive and global scale. Volume One: Fabrication Methods Volume Two: Nanostructure and Atomic Arrangement Volume Three: Electrical and Optical Properties Volume Four: Mechanical and Chemical Properties Volume Five: Size-Dependent Properties Volume Six: Applications and Industrialization This handbook describes the fabrication methods of graphene; the nanostructure and atomic arrangement of graphene; graphene’s electrical and optical properties; the mechanical and chemical properties of graphene; the size effects in graphene, characterization, and applications based on size-affected properties; and the application and industrialization of graphene. Volume two is dedicated to nanostructure and atomic arrangement and covers: The potential applications of graphene heterostructures, particularly, graphene/h-BN heterostructures Atomic-scale defects in graphene and the huge impact they have on its low-energy electronic structure Recent findings on graphene plasmonics The storage of hydrogen between graphene and inside graphene-oxide frameworks (GOFs) The nitrogen contents, species, synthesis methods, and application on nitrogen-doped graphene Modification methods and applications of graphene and graphene oxide Phonon spectra and vibrational thermodynamic characteristics of graphene nanofilms The imaging of graphene by scanning electron microscopy (SEM) Advances in the formation of graphene-based three-dimensional (3D) architectures and more
Download or read book Chemistry of Carbon Nanostructures written by Klaus Muellen and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-06-12 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry of Carbon Nanostructures aims to present the current state-of-the-art synthesis and application of carbon materials like nano diamonds, ribbons and graphene-like structures in science and engineering. Edited by Professor Klaus Müllen, who received the Adolf von Bayer Medal for his contribution to Carbon Chemistry, and Xinliang Feng, this book combines outstanding contributions by a renowned international team of experts. The authors discuss chemical aspects of carbon nanostructures, their synthesis, functionalization and design strategies for defi ned applications. Recent advances in carbon nanomembranes, molecule-assisted ultrasound-induced liquid-phase exfoliation of graphene, and solution synthesis of graphene nanoribbons and biological application of nanodiamonds are highlighted topics. This book provides an excellent reference on the chemistry of carbon nanostructures for Chemists, Materials Scientists, Condensed-matter Physicists, Surface Scientists, and Engineers.
Download or read book Graphene Nanomaterials written by Dharmesh P. Hansora and published by CRC Press. This book was released on 2017-11-22 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of graphene-related nanomaterials and nanocomposite has shown immense utility in the areas of science, engineering, and technology. These materials include graphene derivatives, graphene-supported inorganic nanomaterials and films, graphene-metal decorated nanostructures, core–shell structures of nanocarbon-graphene, and graphene-doped polymer hybrid nanocomposites. They have been prepared by various methods like chemical vapor deposition, exfoliation of graphite, chemical reduction of GO, silver mirror reaction, catalysis, in situ hydroxylation, and sono sol–gel route.
Download or read book Nanostructures For Electronics Photonics Biosensors And Emerging Systems Applications written by Faquir C Jain and published by World Scientific. This book was released on 2022-11-22 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique edited compendium consists of peer-reviewed articles focusing on 2D materials-based nanoelectronics to nanophotonic devices for biosensors and bio-nano-systems.Wide-ranging topics span from novel systems for implementing data with security tokens, single chemical sensor for multi-analyte mixture detection, additively manufactured RF devices for communication, packaging, remote sensing, to energy harvesting applications.Quantum dot-based devices featuring optical modulators and mid-infrared photodetectors in the form of Ferroelectric and quantum dot non-volatile memories, 3D-confined quantum dot channel (QDC) and spatial wavefunction switched (SWS) FETs for high-speed multi-bit logic and novel system applications are also included.Contributed by eminent researchers, recent coverage of materials science for high-speed electronics, nanoelectronics based on ferroelectric and van der Waals materials, material synthesis, modeling of dislocations behavior in various heterostructures, Ultrahigh-Q on-chip SiGe microresonators for quantum transduction in new trend in computing are also prominently discussed.
Download or read book Synthesis and Applications of Inorganic Nanostructures written by Huaqiang Cao and published by John Wiley & Sons. This book was released on 2017-12-26 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by a leading figure in the field, this book systematically describes all the fundamental aspects and applications of inorganic nanostructures from zero to three dimensions. It not only discusses various synthesis technologies, but also covers the physical properties of inorganic nanostructures, such as optical, electric and magnetic properties, and practical applications such as energy storage (including Li-ion and Ni-MH batteries and supercapacitors), superhydrophobic and bio-applications, etc. The focus throughout is on the synthesis-structure-application relationships, including the growth mechanisms for the nanostrucutres. Concise yet comprehensive, this is indispensable reading for chemists and materials scientists.
Download or read book One Dimensional Nanostructures written by Tianyou Zhai and published by John Wiley & Sons. This book was released on 2012-10-19 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the latest research breakthroughs and applications Since the discovery of carbon nanotubes in 1991, one-dimensional nanostructures have been at the forefront of nanotechnology research, promising to provide the building blocks for a new generation of nanoscale electronic and optoelectronic devices. With contributions from 68 leading international experts, this book reviews both the underlying principles as well as the latest discoveries and applications in the field, presenting the state of the technology. Readers will find expert coverage of all major classes of one-dimensional nanostructures, including carbon nanotubes, semiconductor nanowires, organic molecule nanostructures, polymer nanofibers, peptide nanostructures, and supramolecular nanostructures. Moreover, the book offers unique insights into the future of one-dimensional nanostructures, with expert forecasts of new research breakthroughs and applications. One-Dimensional Nanostructures collects and analyzes a wealth of key research findings and applications, with detailed coverage of: Synthesis Properties Energy applications Photonics and optoelectronics applications Sensing, plasmonics, electronics, and biosciences applications Practical case studies demonstrate how the latest applications work. Tables throughout the book summarize key information, and diagrams enable readers to grasp complex concepts and designs. References at the end of each chapter serve as a gateway to the literature in the field. With its clear explanations of the underlying principles of one-dimensional nanostructures, this book is ideal for students, researchers, and academics in chemistry, physics, materials science, and engineering. Moreover, One-Dimensional Nanostructures will help readers advance their own investigations in order to develop the next generation of applications.
Download or read book Handbook of Less Common Nanostructures written by Boris I. Kharisov and published by CRC Press. This book was released on 2012-03-19 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: As nanotechnology has developed over the last two decades, some nanostructures, such as nanotubes, nanowires, and nanoparticles, have become very popular. However, recent research has led to the discovery of other, less-common nanoforms, which often serve as building blocks for more complex structures. In an effort to organize the field, the Handbook of Less-Common Nanostructures presents an informal classification based mainly on the less-common nanostructures. A small nanotechnological encyclopedia, this book: Describes a range of little-known nanostructures Offers a unifying vision of the synthesis of nanostructures and the generalization of rare nanoforms Includes downloadable resources with color versions of more than 100 nanostructures Explores the fabrication of rare nanostructures, including modern physical, chemical, and biological synthesis techniques The Handbook of Less-Common Nanostructures discusses a classification system not directly related to the dimensionality and chemical composition of nanostructure-forming compounds or composite. Instead, it is based mainly on the less-common nanostructures. Possessing unusual shapes and high surface areas, these structures are potentially very useful for catalytic, medical, electronic, and many other applications.
Download or read book Graphene Quantum Dots written by Alev Devrim Güçlü and published by Springer. This book was released on 2014-09-11 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the current status of theoretical and experimental research of graphene based nanostructures, in particular quantum dots, at a level accessible to young researchers, graduate students, experimentalists and theorists. It presents the current state of research of graphene quantum dots, a single or few monolayer thick islands of graphene. It introduces the reader to the electronic and optical properties of graphite, intercalated graphite and graphene, including Dirac fermions, Berry's phase associated with sublattices and valley degeneracy, covers single particle properties of graphene quantum dots, electron-electron interaction, magnetic properties and optical properties of gated graphene nanostructures. The electronic, optical and magnetic properties of the graphene quantum dots as a function of size, shape, type of edge and carrier density are considered. Special attention is paid to the understanding of edges and the emergence of edge states for zigzag edges. Atomistic tight binding and effective mass approaches to single particle calculations are performed. Furthermore, the theoretical and numerical treatment of electron-electron interactions at the mean-field, HF, DFT and configuration-interaction level is described in detail.
Download or read book Advances in Carbon Nanostructures written by Adrián Silva and published by BoD – Books on Demand. This book was released on 2016-10-05 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon atoms have the amazing ability to bond in remarkable different manners that can assume distinct astonishing dimensional arrangements from which absolutely diverse and interesting nanostructured carbon materials are obtained. This book aims to cover the most recent advances in (i) Graphene and derivatives, including graphene-based magnetic composites, membranes, wafer devices, and nanofibers for several applications, as well as some particular properties, such as light emission from graphene; (ii) Carbon nanotubes heaters and fibers for reinforcement of cement and diamond-based thin films; and (iii) Nanofluids consisting of both graphene and carbon nanotubes, apart from reporting some important case studies dealing with carbon nanostructures and their use in sensors, coatings, or electromagnetic wave absorbers.
Download or read book Physics and Chemistry of Graphene Second Edition written by Toshiaki Enoki and published by CRC Press. This book was released on 2019-11-01 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene has been attracting growing attentions in physics, chemistry, and device applications after the discovery of micromechanically cleaved graphene sheet by A. Geim and K. Novoselov, who were awarded the 2010 Nobel Prize in Physics. The electronic structure of graphene, which is described in terms of massless Dirac fermions, brings about unconventional electronic properties, which are not only an important basic issue in condensed matter physics but also a promising target of cutting-edge electronics/spintronics device applications. Meanwhile, from chemistry aspect, graphene is the extreme of condensed polycyclic hydrocarbon molecules extrapolated to infinite size. Here, the concept on aromaticity, which organic chemists utilize, is applicable. Interesting issues appearing between physics and chemistry are pronounced in nanosized graphene (nanographene), as we recognize the importance of the shape of nanographene in understanding its electronic structure. This book comprehensively discusses the fundamental issues related to the electronic, magnetic, and chemical properties of condensed polycyclic hyodrocarbon molecules, nanographene, and graphene.
Download or read book 1D Semiconducting Hybrid Nanostructures written by Arvind Kumar and published by John Wiley & Sons. This book was released on 2022-12-05 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1D Semiconducting Hybrid Nanostructures In-depth discussion on the physics, chemistry, and engineering beneath the construction of 1D semiconducting hybrid materials 1D Semiconducting Hybrid Nanostructures: Synthesis and Applications in Gas Sensing and Optoelectronics provides breakthrough research developments and trends in a variety of 1D hybrid nanostructures for chemi-resistive gas sensors and optoelectronics applications, including recent investigations and developments regarding the innovative designing approaches, fabrications, and methods used to characterize these hybrid nanostructures. The text also includes the surface and interface properties of 1D hybrid semiconducting nanostructured materials, as well as their optimization for applications in gas sensing and optoelectronics. This book further addresses the different issues of sensitivity, selectivity, and operating temperature of gas sensors based on hybrid 1D nanostructures. Moreover, it covers the novel and additional functional optoelectronic properties that originate at the interface of 1D semiconducting nanostructures combined with other low dimensional materials. Some of the specific sample topics covered in this book include: Gas sensing and optoelectronic applications of one-dimensional semiconducting hybrid nanostructures, plus synthesis and gas sensing application of 1D semiconducting hybrid nanostructures Room temperature gas sensing properties of metal oxide nanowire/graphene hybrid structures and highly sensitive room temperature gas sensors based on organic-inorganic nanofibers Synthesis and applications of 1D hybrid tin oxide nanostructures and recent advances in semiconducting nanowires-based hybrid structures for solar application Types of semiconducting hybrid nanostructures for optoelectronic devices and hybrid 1D semiconducting ZnO/GaN nanostructures Thanks to its comprehensive coverage of the subject from highly qualified authors who have significant experience in the field, 1D Semiconducting Hybrid Nanostructures is a must-have reference for senior undergraduate and graduate students, professionals, researchers, in the field of semiconductor physics, materials science, surface science, and chemical engineering.
Download or read book Physics Chemistry and Applications of Nanostructures written by Viktor Evgen?evich Borisenko and published by World Scientific. This book was released on 2011 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents invited reviews and original short notes of recent results obtained in studies concerning the fabrication and application of nanostructures, which hold great promise for the new generation of electronic and optoelectronic devices. Governing exciting and relatively new topics such as fast-progressing nanoelectronics and optoelectronics, molecular electronics and spintronics, nanophotonics, nanosensorics and nanobiology as well as nanotechnology and quantum processing of information, this book gives readers a more complete understanding of the practical uses of nanotechnology and nanostructures.
