Download or read book Graphene Ge III V and Emerging Materials for Post CMOS Applications 2 written by P. Srinivasan and published by The Electrochemical Society. This book was released on 2010-04 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions addresses the fundamental material science, characterization, modeling and applications of Graphene, Ge-III-V and Emerging materials designed for alternatives technologies to replace CMOS.
Download or read book Graphene Ge III V and Emerging Materials for Post CMOS Applications 5 written by and published by . This book was released on 2013 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Graphene Ge III V Nanowires and Emerging Materials for Post CMOS Applications 4 written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Graphene Ge III V Nanowires and Emerging Materials for Post CMOS Applications 4 written by Electrochemical Society and published by ECS Transactions. This book was released on 2012-04 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions covers emerging electronic materials and concepts, including but not limited to, beyond CMOS integration schemes/technology development and on the impact of nontraditional materials such as optical, laser, RF, and other non-conventional devices in nanoelectronics. Topics include grapheme material properties, preparation, synthesis, and growth; Ge and SiGe devices for PMOS mobility enhancement for next generation CMOS and other devices beyond strain engineering, III-V heterostructures on Si substrates.
Download or read book Dielectrics in Nanosystems and Graphene Ge III V Nanowires and Emerging Materials for Post CMOS Applications 3 written by Zia Karim and published by The Electrochemical Society. This book was released on 2011-04-25 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions will cover the following topics in (a) Graphene Material Properties, Preparation, Synthesis and Growth; (b) Metrology and Characterization of Graphene; (c) Graphene Devices and Integration; (d) Graphene Transport and mobility enhancement; (e) Thermal Behavior of Graphene and Graphene Based Devices; (f) Ge & III-V devices for CMOS mobility enhancement; (g) III.V Heterostructures on Si substrates; (h) Nano-wires devices and modeling; (i) Simulation of devices based on Ge, III-V, nano-wires and Graphene; (j) Nanotechnology applications in information technology, biotechnology and renewable energy (k) Beyond CMOS device structures and properties of semiconductor nano-devices such as nanowires; (l) Nanosystem fabrication and processing; (m) nanostructures in chemical and biological sensing system for healthcare and security; and (n) Characterization of nanosystems; (f) Nanosystem modeling.
Download or read book Graphene and Emerging Materials for Post CMOS Applications written by Yaw Obeng and published by The Electrochemical Society. This book was released on 2009-05 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of this symposium was to address all current and future issues related to ¿Emerging Materials For Post-CMOS Applications.¿ The symposium focused on fundamental material science, characterization and applications of emerging materials designed for alternatives technologies to replace CMOS. Special emphasis was placed on ¿Beyond CMOS¿ integration schemes, technology development and on the impact of non-traditional materials into nanoelectronics.
Download or read book Graphene for Transparent Conductors written by Qingbin Zheng and published by Springer. This book was released on 2015-07-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic presentation of the principles and practices behind the synthesis and functionalization of graphene and grapheme oxide (GO), as well as the fabrication techniques for transparent conductors from these materials. Transparent conductors are used in a wide variety of photoelectronic and photovoltaic devices, such as liquid crystal displays (LCDs), solar cells, optical communication devices, and solid-state lighting. Thin films made from indium tin oxide (ITO) have thus far been the dominant source of transparent conductors, and now account for 50% of indium consumption. However, the price of Indium has increased 1000% in the last 10 years. Graphene, a two-dimensional monolayer of sp2-bonded carbon atoms, has attracted significant interest because of its unique transport properties. Because of their high optical transmittance and electrical conductivity, thin film electrodes made from graphene nanosheets have been considered an ideal candidate to replace expensive ITO films. Graphene for Transparent Conductors offers a systematic presentation of the principles, theories and technical practices behind the structure–property relationship of the thin films, which are the key to the successful development of high-performance transparent conductors. At the same time, the unique perspectives provided in the applications of graphene and GO as transparent conductors will serve as a general guide to the design and fabrication of thin film materials for specific applications.
Download or read book Thermoelectricity and Heat Transport in Graphene and Other 2D Nanomaterials written by Serhii Shafraniuk and published by Elsevier. This book was released on 2017-07-15 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoelectricity and Heat Transport in Graphene and Other 2D Nanomaterials describes thermoelectric phenomena and thermal transport in graphene and other 2-dimentional nanomaterials and devices. Graphene, which is an example of an atomic monolayered material, has become the most important growth area in materials science research, stimulating an interest in other atomic monolayeric materials. The book analyses flow management, measurement of the local temperature at the nanoscale level and thermoelectric transducers, with reference to both graphene and other 2D nanomaterials. The book covers in detail the mechanisms of thermoelectricity, thermal transport, interface phenomena, quantum dots, non-equilibrium states, scattering and dissipation, as well as coherent transport in low-dimensional junctions in graphene and its allotropes, transition metal dichalcogenides and boron nitride. This book aims to show readers how to improve thermoelectric transducer efficiency in graphene and other nanomaterials. The book describes basic ingredients of such activity, allowing readers to gain a greater understanding of fundamental issues related to the heat transport and the thermoelectric phenomena of nanomaterials. It contains a thorough analysis and comparison between theory and experiments, complemented with a variety of practical examples. Shows readers how to improve the efficiency of heat transfer in graphene and other nanomaterials with analysis of different methodologies Includes fundamental information on the thermoelectric properties of graphene and other atomic monolayers, providing a valuable reference source for materials scientists and engineers Covers the important models of thermoelectric phenomena and thermal transport in the 2D nanomaterials and nanodevices, allowing readers to gain a greater understanding of the factors behind the efficiency of heat transport in a variety of nanomaterials
Download or read book Advanced Computational Nanomechanics written by Nuno Silvestre and published by John Wiley & Sons. This book was released on 2016-02-08 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains the latest research advances in computational nanomechanics in one comprehensive volume Covers computational tools used to simulate and analyse nanostructures Includes contributions from leading researchers Covers of new methodologies/tools applied to computational nanomechanics whilst also giving readers the new findings on carbon-based aggregates (graphene, carbon-nanotubes, nanocomposites) Evaluates the impact of nanoscale phenomena in materials
Download or read book Characterization of Nanomaterials in Complex Environmental and Biological Media written by and published by Elsevier. This book was released on 2015-06-01 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization of Nanomaterials in Complex Environmental and Biological Media covers the novel properties of nanomaterials and their applications to consumer products and industrial processes. The book fills the growing gap in this challenging area, bringing together disparate strands in chemistry, physics, biology, and other relevant disciplines. It provides an overview on nanotechnology, nanomaterials, nano(eco)toxicology, and nanomaterial characterization, focusing on the characterization of a range of nanomaterial physicochemical properties of relevance to environmental and toxicological studies and their available analytical techniques. Readers will find a multidisciplinary approach that provides highly skilled scientists, engineers, and technicians with the tools they need to understand and interpret complicated sets of data obtained through sophisticated analytical techniques. Addresses the requirements, challenges, and solutions for nanomaterial characterization in environmentally complex media Focuses on technique limitations, appropriate data collection, data interpretation, and analysis Aids in understanding and comparing nanomaterial characterization data reported in the literature using different analytical tools Includes case studies of characterization relevant complex media to enhance understanding
Download or read book Graphene and III V Channel Metal oxide semiconductor Field effect Devices for Post Si CMOS Applications written by Michael Edward Ramón and published by . This book was released on 2013 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: To meet the demands for continuous transistor scaling and performance improvements required by the ITRS, there has been a tremendous amount of effort related to alternative high mobility channel materials as potential Si replacements for MOSFET fabrication. Two particularly attractive material systems include III-V substrates and graphene. Thus far, the high trap density which characterizes high-k dielectrics and the III-V/high-k dielectric interface remains an obstacle to III-V substrate integration. In a first aspect of this work, charge traps within the gate stack of III-V MOSFETs, as well as at the III-V/dielectric interface, were examined to better understand their impact on III-V device performance. In particular, a pulsed I-V measurement technique was used to assess the impact of fast and slow transient charging effects on various III-V transistors with ALD-deposited Al2O3 gate dielectric. The charge pumping technique was also utilized to determine the density of interface traps, including their energy distribution and position profile, providing further understanding into the nature of traps in the III-V/high-k system. Graphene has also attracted considerable interest owing to its high intrinsic mobility, large current densities, thermodynamic and mechanical stability. Yet, a primary challenge to the integration of graphene substrates is the lack of high quality, large-area graphene. Thus, in another aspect of this work, large-area graphene was synthesized by CVD of acetylene on Co thin films, and the influence of Co film thickness on graphene synthesis was studied. Resulting graphene films were characterized using Raman spectroscopy and back-gated GFETs were fabricated. Taking advantage of graphene’s intrinsic ambipolar electron-hole symmetry, GFET frequency doublers were fabricated on low-capacitance, single-crystal quartz substrates. GFETs frequency doublers were found to operate beyond their transit frequency (fT), and in the limit of vanishing device non-idealities, their maximum conversion gain was determined to approach a near lossless value. To further understand and improve GFET RF performance, the impact of parasitic resistances was experimentally examined. RF measurements as a function of temperature and modulated access resistance highlight the strong influence of RC on scaled devices, while the impact of RA becomes more evident for devices with large access regions.
Download or read book 2D Monoelemental Materials Xenes and Related Technologies written by Zongyu Huang and published by CRC Press. This book was released on 2022-04-19 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monoelemental 2D materials called Xenes have a graphene-like structure, intra-layer covalent bond, and weak van der Waals forces between layers. Materials composed of different groups of elements have different structures and rich properties, making Xenes materials a potential candidate for the next generation of 2D materials. 2D Monoelemental Materials (Xenes) and Related Technologies: Beyond Graphene describes the structure, properties, and applications of Xenes by classification and section. The first section covers the structure and classification of single-element 2D materials, according to the different main groups of monoelemental materials of different components and includes the properties and applications with detailed description. The second section discusses the structure, properties, and applications of advanced 2D Xenes materials, which are composed of heterogeneous structures, produced by defects, and regulated by the field. Features include: Systematically detailed single element materials according to the main groups of the constituent elements Classification of the most effective and widely studied 2D Xenes materials Expounding upon changes in properties and improvements in applications by different regulation mechanisms Discussion of the significance of 2D single-element materials where structural characteristics are closely combined with different preparation methods and the relevant theoretical properties complement each other with practical applications Aimed at researchers and advanced students in materials science and engineering, this book offers a broad view of current knowledge in the emerging and promising field of 2D monoelemental materials.
Download or read book 3D IC Stacking Technology written by Banqiu Wu and published by McGraw Hill Professional. This book was released on 2011-10-14 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest advances in three-dimensional integrated circuit stacking technology With a focus on industrial applications, 3D IC Stacking Technology offers comprehensive coverage of design, test, and fabrication processing methods for three-dimensional device integration. Each chapter in this authoritative guide is written by industry experts and details a separate fabrication step. Future industry applications and cutting-edge design potential are also discussed. This is an essential resource for semiconductor engineers and portable device designers. 3D IC Stacking Technology covers: High density through silicon stacking (TSS) technology Practical design ecosystem for heterogeneous 3D IC products Design automation and TCAD tool solutions for through silicon via (TSV)-based 3D IC stack Process integration for TSV manufacturing High-aspect-ratio silicon etch for TSV Dielectric deposition for TSV Barrier and seed deposition Copper electrodeposition for TSV Chemical mechanical polishing for TSV applications Temporary and permanent bonding Assembly and test aspects of TSV technology
Download or read book New Research on Silicon written by Vitalyi Igorevich Talanin and published by BoD – Books on Demand. This book was released on 2017-05-31 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The knowledge of fundamental silicon questions and all aspects of silicon technology gives the possibility of improvement to both initial silicon material and devices on silicon basis. The articles for this book have been contributed by the much respected researchers in this area and cover the most recent developments and applications of silicon technology and some fundamental questions. This book provides the latest research developments in important aspects of silicon including nanoclusters, solar silicon, porous silicon, some technological processes, and silicon devices and also fundamental question about silicon structural perfection. This book is of interest both to fundamental research and to practicing scientists and also will be useful to all engineers and students in industry and academia.
Download or read book Advanced Nanoelectronics written by Muhammad Mustafa Hussain and published by John Wiley & Sons. This book was released on 2019-01-04 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brings novel insights to a vibrant research area with high application potential?covering materials, physics, architecture, and integration aspects of future generation CMOS electronics technology Over the last four decades we have seen tremendous growth in semiconductor electronics. This growth has been fueled by the matured complementary metal oxide semiconductor (CMOS) technology. This comprehensive book captures the novel device options in CMOS technology that can be realized using non-silicon semiconductors. It discusses germanium, III-V materials, carbon nanotubes and graphene as semiconducting materials for three-dimensional field-effect transistors. It also covers non-conventional materials such as nanowires and nanotubes. Additionally, nanoelectromechanical switches-based mechanical relays and wide bandgap semiconductor-based terahertz electronics are reviewed as essential add-on electronics for enhanced communication and computational capabilities. Advanced Nanoelectronics: Post-Silicon Materials and Devices begins with a discussion of the future of CMOS. It continues with comprehensive chapter coverage of: nanowire field effect transistors; two-dimensional materials for electronic applications; the challenges and breakthroughs of the integration of germanium into modern CMOS; carbon nanotube logic technology; tunnel field effect transistors; energy efficient computing with negative capacitance; spin-based devices for logic, memory and non-Boolean architectures; and terahertz properties and applications of GaN. -Puts forward novel approaches for future, state-of-the-art, nanoelectronic devices -Discusses emerging materials and architectures such as alternate channel material like germanium, gallium nitride, 1D nanowires/tubes, 2D graphene, and other dichalcogenide materials and ferroelectrics -Examines new physics such as spintronics, negative capacitance, quantum computing, and 3D-IC technology -Brings together the latest developments in the field for easy reference -Enables academic and R&D researchers in semiconductors to "think outside the box" and explore beyond silica An important resource for future generation CMOS electronics technology, Advanced Nanoelectronics: Post-Silicon Materials and Devices will appeal to materials scientists, semiconductor physicists, semiconductor industry, and electrical engineers.
Download or read book Frontiers of Graphene and Carbon Nanotubes written by Kazuhiko Matsumoto and published by Springer. This book was released on 2015-03-05 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on carbon nanotubes and graphene as representatives of nano-carbon materials, and describes the growth of new technology and applications of new devices. As new devices and as new materials, nano-carbon materials are expected to be world pioneers that could not have been realized with conventional semiconductor materials, and as those that extend the limits of conventional semiconductor performance. This book introduces the latest achievements of nano-carbon devices, processes, and technology growth. It is anticipated that these studies will also be pioneers in the development of future research of nano-carbon devices and materials. This book consists of 18 chapters. Chapters 1 to 8 describe new device applications and new growth methods of graphene, and Chapters 9 to 18, those of carbon nanotubes. It is expected that by increasing the advantages and overcoming the weak points of nanocarbon materials, a new world that cannot be achieved with conventional materials will be greatly expanded. We strongly hope this book contributes to its development.
Download or read book 2D Metal Carbides and Nitrides MXenes written by Babak Anasori and published by Springer Nature. This book was released on 2019-10-30 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the rapidly expanding field of two-dimensional (2D) transition metal carbides and nitrides (MXenes). It covers fundamental knowledge on synthesis, structure, and properties of these new materials, and a description of their processing, scale-up and emerging applications. The ways in which the quickly expanding family of MXenes can outperform other novel nanomaterials in a variety of applications, spanning from energy storage and conversion to electronics; from water science to transportation; and in defense and medical applications, are discussed in detail.
