Download or read book Graphene and Carbon Nanotube Field Effect Transistors written by and published by . This book was released on 2012 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Graphene and Carbon Nanotube Field Effect Transistors written by Mykola Fomin and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Carbon Nanotube and Graphene Device Physics written by H.-S. Philip Wong and published by Cambridge University Press. This book was released on 2011 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first introductory textbook to explain the properties and performance of practical nanotube devices and related applications.

Download or read book Major Applications of Carbon Nanotube Field Effect Transistors CNTFET written by Raj, Balwinder and published by IGI Global. This book was released on 2019-12-06 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: With recent advancements in electronics, specifically nanoscale devices, new technologies are being implemented to improve the properties of automated systems. However, conventional materials are failing due to limited mobility, high leakage currents, and power dissipation. To mitigate these challenges, alternative resources are required to advance electronics further into the nanoscale domain. Carbon nanotube field-effect transistors are a potential solution yet lack the information and research to be properly utilized. Major Applications of Carbon Nanotube Field-Effect Transistors (CNTFET) is a collection of innovative research on the methods and applications of converting semiconductor devices from micron technology to nanotechnology. The book provides readers with an updated status on existing CNTs, CNTFETs, and their applications and examines practical applications to minimize short channel effects and power dissipation in nanoscale devices and circuits. While highlighting topics including interconnects, digital circuits, and single-wall CNTs, this book is ideally designed for electrical engineers, electronics engineers, students, researchers, academicians, industry professionals, and practitioners working in nanoscience, nanotechnology, applied physics, and electrical and electronics engineering.

Download or read book Carbon Nanotube Field Effect Transistor written by Fouad Sabry and published by One Billion Knowledgeable. This book was released on 2022-07-10 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: What Is Carbon Nanotube Field Effect Transistor A carbon nanotube field-effect transistor, also known as a CNTFET, is a kind of field-effect transistor that makes use of a single carbon nanotube or an array of carbon nanotubes as the channel material in place of bulk silicon, as is done in the conventional MOSFET construction. Since they were first exhibited in 1998, there have been significant advancements in CNTFET technology. How You Will Benefit (I) Insights, and validations about the following topics: Chapter 1: Carbon nanotube field-effect transistor Chapter 2: Carbon nanotube Chapter 3: JFET Chapter 4: Schottky barrier Chapter 5: Electron mobility Chapter 6: Nanoelectromechanical systems Chapter 7: Threshold voltage Chapter 8: Organic field-effect transistor Chapter 9: Ballistic conduction Chapter 10: Hybrid solar cell Chapter 11: Potential applications of carbon nanotubes Chapter 12: Carbon nanotubes in photovoltaics Chapter 13: Optical properties of carbon nanotubes Chapter 14: Carbon nanotube nanomotor Chapter 15: NanoIntegris Chapter 16: Ballistic conduction in single-walled carbon nanotubes Chapter 17: Tunnel field-effect transistor Chapter 18: Field-effect transistor Chapter 19: Carbon nanotubes in interconnects Chapter 20: Synthesis of carbon nanotubes Chapter 21: Vertically aligned carbon nanotube arrays (II) Answering the public top questions about carbon nanotube field effect transistor. (III) Real world examples for the usage of carbon nanotube field effect transistor in many fields. (IV) 17 appendices to explain, briefly, 266 emerging technologies in each industry to have 360-degree full understanding of carbon nanotube field effect transistor' technologies. Who This Book Is For Professionals, undergraduate and graduate students, enthusiasts, hobbyists, and those who want to go beyond basic knowledge or information for any kind of carbon nanotube field effect transistor.

Download or read book Carbon Based Electronics written by Ashok Srivastava and published by CRC Press. This book was released on 2015-03-19 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovery of one-dimensional material carbon nanotubes in 1991 by the Japanese physicist Dr. Sumio Iijima has resulted in voluminous research in the field of carbon nanotubes for numerous applications, including possible replacement of silicon used in the fabrication of CMOS chips. One interesting feature of carbon nanotubes is that these can be me

Download or read book Nanowelded Carbon Nanotubes written by Changxin Chen and published by Springer Science & Business Media. This book was released on 2009-08-26 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a novel ultrasonic nanowelding technology of carbon nanotubes (CNTs) to metal electrodes and its application for CNT devices. It will be of interest to graduates, scientists and engineers working on CNTs and related topics.

Download or read book Carbon Nanotube and Graphene Field effect Transistors for Aptamer and Odorant Receptor based Biosensors written by Thanihaichelvan Murugathas and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Carbon Nanotube Electronics written by Ali Javey and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete overview of the field of carbon nanotube electronics. It covers materials and physical properties, synthesis and fabrication processes, devices and circuits, modeling, and finally novel applications of nanotube-based electronics. The book introduces fundamental device physics and circuit concepts of 1-D electronics. At the same time it provides specific examples of the state-of-the-art nanotube devices.

Download or read book Graphene Field Effect Transistors written by Omar Azzaroni and published by John Wiley & Sons. This book was released on 2023-08-01 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene Field-Effect Transistors In-depth resource on making and using graphene field effect transistors for point-of-care diagnostic devices Graphene Field-Effect Transistors focuses on the design, fabrication, characterization, and applications of graphene field effect transistors, summarizing the state-of-the-art in the field and putting forward new ideas regarding future research directions and potential applications. After a review of the unique electronic properties of graphene and the production of graphene and graphene oxide, the main part of the book is devoted to the fabrication of graphene field effect transistors and their sensing applications. Graphene Field-Effect Transistors includes information on: Electronic properties of graphene, production of graphene oxide and reduced graphene oxide, and graphene functionalization Fundamentals and fabrication of graphene field effect transistors, and nanomaterial/graphene nanostructure-based field-effect transistors Graphene field-effect transistors integrated with microfluidic platforms and flexible graphene field-effect transistors Graphene field-effect transistors for diagnostics applications, and DNA biosensors and immunosensors based on graphene field-effect transistors Graphene field-effect transistors for targeting cancer molecules, brain activity recording, bacterial detection, and detection of smell and taste Providing both fundamentals of the technology and an in-depth overview of using graphene field effect transistors for fabricating bioelectronic devices that can be applied for point-of-care diagnostics, Graphene Field-Effect Transistors is an essential reference for materials scientists, engineering scientists, laboratory medics, and biotechnologists.

Download or read book Comparative Study of Carbon Nanotube and Graphene Field effect Transistors for GHz Charge Detection written by Andreas Betz and published by . This book was released on 2008 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analytical Modelling of Breakdown Effect in Graphene Nanoribbon Field Effect Transistor written by Iraj Sadegh Amiri and published by Springer. This book was released on 2017-10-29 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses analytical approaches and modeling of the breakdown voltage (BV) effects on graphene-based transistors. It presents semi-analytical models for lateral electric field, length of velocity saturation region (LVSR), ionization coefficient (α), and breakdown voltage (BV) of single and double-gate graphene nanoribbon field effect transistors (GNRFETs). The application of Gauss’s law at drain and source regions is employed in order to derive surface potential and lateral electric field equations. LVSR is then calculated as a solution of surface potential at saturation condition. The ionization coefficient is modelled and calculated by deriving equations for probability of collisions in ballistic and drift modes based on the lucky drift theory of ionization. The threshold energy of ionization is computed using simulation and an empirical equation is derived semi-analytically. Lastly avalanche breakdown condition is employed to calculate the lateral BV. On the basis of this, simple analytical and semi-analytical models are proposed for the LVSR and BV, which could be used in the design and optimization of semiconductor devices and sensors. The proposed equations are used to examine BV at different channel lengths, supply voltages, oxide thickness, GNR widths, and gate voltages. Simulation results show that the operating voltage of FETs could be as low as 0.25 V in order to prevent breakdown. However, after optimization, it can go as high as 1.5 V. This work is useful for researchers working in the area of graphene nanoribbon-based transistors.

Download or read book Carbon Nanotube Field Effect Transistors for Power Application written by Tao Pan (S.M.) and published by . This book was released on 2007 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) are nanometer-diameter cylinders formed from rolled-up graphene sheets which have found widespread interests due to their many excellent electrical properties. In particular, most of them are direct bandgap semiconductors from which carbon nanotube field effect transistors (CNTFETs) can be made. The small feature size and high electron mobility of the CNT makes it attractive and a good candidate to replace modern MOSFETs. So far, most fabricated CNTFETs conduct currents only on the order of microamps under low voltage bias which cannot be used to drive large output loads. In this work, we attempt to explore the ultimate performance benefits from utilizing multiple CNTs for CNTFETs. Two ways of making multi-tube CNTFETs are demonstrated in this thesis. Devices are fabricated, measured and analyzed. A simple model is used to evaluate the ideal ballistic behavior of CNTFETs. Parasitics that are measured from experiments and extracted from numerical tools are added to the model. As an application, we compare the performance of CNTFETs with MOSFETs, both used as power transistors in a Buck DC-DC converter circuit.

Download or read book Carbon Nanotubes and Graphene written by Kazuyoshi Tanaka and published by Newnes. This book was released on 2014-07-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes and Graphene is a timely second edition of the original Science and Technology of Carbon Nanotubes. Updated to include expanded coverage of the preparation, purification, structural characterization, and common application areas of single- and multi-walled CNT structures, this work compares, contrasts, and, where appropriate, unitizes CNT to graphene. This much expanded second edition reference supports knowledge discovery, production of impactful carbon research, encourages transition between research fields, and aids the formation of emergent applications. New chapters encompass recent developments in the theoretical treatments of electronic and vibrational structures, and magnetic, optical, and electrical solid-state properties, providing a vital base to research. Current and potential applications of both materials, including the prospect for large-scale synthesis of graphene, biological structures, and flexible electronics, are also critically discussed. Updated discussion of properties, structure, and morphology of biological and flexible electronic applications aids fundamental knowledge discovery Innovative parallel focus on nanotubes and graphene enables you to learn from the successes and failures of, respectively, mature and emergent partner research disciplines High-quality figures and tables on physical and mathematical applications expertly summarize key information – essential if you need quick, critically relevant data

Download or read book Frontiers of Graphene and Carbon Nanotubes written by Kazuhiko Matsumoto and published by Springer. This book was released on 2015-03-05 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on carbon nanotubes and graphene as representatives of nano-carbon materials, and describes the growth of new technology and applications of new devices. As new devices and as new materials, nano-carbon materials are expected to be world pioneers that could not have been realized with conventional semiconductor materials, and as those that extend the limits of conventional semiconductor performance. This book introduces the latest achievements of nano-carbon devices, processes, and technology growth. It is anticipated that these studies will also be pioneers in the development of future research of nano-carbon devices and materials. This book consists of 18 chapters. Chapters 1 to 8 describe new device applications and new growth methods of graphene, and Chapters 9 to 18, those of carbon nanotubes. It is expected that by increasing the advantages and overcoming the weak points of nanocarbon materials, a new world that cannot be achieved with conventional materials will be greatly expanded. We strongly hope this book contributes to its development.

Download or read book Physics of Carbon Nanotube Devices written by Francois Leonard and published by William Andrew. This book was released on 2008-11-18 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Possibly the most impactful material in the nanotechnology arena, carbon nanotubes have spurred a tremendous amount of scientific research and development. Their superior mechanical and chemical robustness makes them easily manipulable and allows for the assembly of various types of devices, including electronic, electromechanical, opto-electronic and sensing devices.In the field of nanotube devices, however, concepts that describe the properties of conventional devices do not apply. Carbon nanotube devices behave much differently from those using traditional materials, and offer entirely new functionality. This book – designed for researchers, engineers and graduate students alike – bridges the experimental and theoretical aspects of carbon nanotube devices. It emphasizes and explains the underlying physics that govern their working principles, including applications in electronics, nanoelectromechanical systems, field emission, optoelectronics and sensing. Other topics include: electrical contacts, p-n junctions, transistors, ballistic transport, field emission, oscillators, rotational actuators, electron-phonon scattering, photoconductivity, and light emission. Many of the aspects discussed here differ significantly from those learned in books or traditional materials, and are essential for the future development of carbon nanotube technology.• Bridges experimental and theoretical aspects of carbon nanotube devices, focusing on the underlying physics that govern their working principles • Explains applications in electronics, nanoelectromechanical systems, field emission, optoelectronics and sensing. • Other topics include: electrical contacts, p-n junctions, transistors, ballistic transport, field emission, oscillators, rotational actuators, electron-phonon scattering, photoconductivity, and light emission. • Covers aspects that significantly differ from those learned in traditional materials, yet are essential for future advancement of carbon nanotube technology. * Bridges experimental and theoretical aspects of carbon nanotube devices, focusing on the underlying physics that govern their working principles * Explains applications in electronics, nanoelectromechanical systems, field emission, optoelectronics and sensing.* Other topics include: electrical contacts, p-n junctions, transistors, ballistic transport, field emission, oscillators, rotational actuators, electron-phonon scattering, photoconductivity, and light emission* Covers aspects that significantly differ from those learned in traditional materials, yet are essential for future advancement of carbon nanotube technology.

Download or read book Comparison of Carbon Nanotube and Graphene Field effect Transistor Biosensors written by Grant William Saltzgaber and published by . This book was released on 2012 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detection of biomolecules is important for the diagnosis and treatment of diseases. Low concentration detection, specific biomolecule detection, and point-of-care use are appealing characteristics for biosensors because of the possibility of early detection and quick results of specific biomolecules. Furthermore, inexpensive biosensors are appealing so that they are accessible to the general population. The biosensors in this study have the potential to satisfy these characteristics. In this study graphene field-effect transistors (G-FET) were fabricated. Graphene was grown using chemical vapor deposition (CVD) and transferred to a silicon/silicon oxide substrate. The CVD method is the most scalable and cost-effective method of producing graphene for devices. Standard photolithography was used to pattern and then deposit metal electrodes. Two separate experiments were conducted; one using electrostatic attraction to bind protein to the active area of the G-FET to detect the protein poly-L-lysine (PLL) and one using an aptamer modified G-FET to selectively detect the protein thrombin. Analyte was delivered using a homebuilt, pressure driven, microfluidic, mass flow system. Both experiments showed a detection of the protein. The PLL experiment showed a clear change in the effective gate voltage of the G-FET. The thrombin experiment showed a change in the effective gate voltage that varied with differing concentrations of thrombin present. Furthermore, in the thrombin experiment by changing from a thrombin solution back to buffer the effective gate voltage was brought back to its original value. A competing protein was introduced and gave a signal comparable to the signal of a 10 times smaller concentration of thrombin. All of this shows that CVD grown graphene in a FET biosensor can be used for protein detection. Furthermore, the specific detection of thrombin suggests that aptamer modified G-FETs with CVD grown graphene can be used as a protein specific biosensor.