Download or read book Grain Size and Texture Control in Aluminum Alloys written by Shailesh S. Kulkarni and published by . This book was released on 1998 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Grain Size Control and Superplasticity in 6013 type Aluminum Alloys written by Lillianne Plaster Whitelock Troeger and published by . This book was released on 1998 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Aluminum written by George E. Totten and published by CRC Press. This book was released on 2003-03-27 with total page 1318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes covers all aspects of the physical metallurgy, analytical techniques, and processing of aluminium, including hardening, annealing, aging, property prediction, corrosion, residual stress and distortion, welding, casting, forging, molten metal processing, machining, rolling, and extrusion. It also features an extensive, chapter-length consideration of quenching.
Download or read book Microstructural Control in Aluminum Alloys written by E. Henry Chia and published by . This book was released on 1986 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminum Alloys Contemporary Research and Applications written by A. K. Vasudevan and published by Elsevier. This book was released on 2012-12-02 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the structure and properties of the current and potential aluminum alloys in terms of their structure (and structural transformations by new processing methods) and the relationship between structure and mechanical and other properties. The alternative materials that challenge aluminum are considered as well, since the challenge of new competitive materials is a strong influence on innovation. The book bridges the gap between current scientific understanding and engineering practice. It is an up-to-date reference that will be of use to researchers and advanced students in metallurgy and materials engineering.
Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book 13th International Conference on Aluminum Alloys ICAA 13 written by Hasso Weiland and published by Springer. This book was released on 2017-02-28 with total page 1857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the 13th International Conference on Aluminum Alloys (ICAA-13), the premier global conference for exchanging emerging knowledge on the structure and properties of aluminum materials. The papers are organized around the topics of the science of aluminum alloy design for a range of market applications; the accurate prediction of material properties; novel aluminum products and processes; and emerging developments in recycling and applications using both monolithic and multi-material solutions.
Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2011-09-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental mechanisms of aluminum plasticity at hot working temperatures. Using extensive analysis derived from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD), and orientation imaging microscopy (OIM), the authors examine those microstructures that evolve in torsion, compression, extrusion, and rolling. Further microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization, or gDRX), and continuous dynamic recrystallization involving both a single phase (cDRX/1-phase) and multiple phases (cDRX/2-phase). A companion to other works that focus on modeling, manufacturing involving plastic and superplastic deformation, and control of texture and phase transformations, this book provides thorough explanations of microstructural development to lay the foundation for further study of the mechanisms of thermomechanical processes and their application.
Download or read book Alloy And Microstructural Design written by John Tien and published by Elsevier. This book was released on 2012-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloy and Microstructural Design serves as a guide in translating theory into design and practice and provides text for an applications courses in physical and mechanical metallurgy. Coverage of the book includes a short history and introduction to metals and alloys; high-strength nonferrous alloys; and methods in strengthening metals for commercial use and high temperatures. The text also discusses the composite strengthening; the properties of composites; creep and stress rupture resistance and other factors related to them; fracture toughness; and mechanical equations of state. The book also covers the resistance of metals and alloys against fatigue, aqueous, stress, and hot corrosion, as well as in oxidation and hydrogen embrittlement. The monograph is recommended for practicing engineers in the field of metallurgy who need an easily understood guide with concise text and tables of handy information. The book will also serve as a good learning material for engineering undergraduates who are studying the strength of materials.
Download or read book Grain Size Control written by T. Gladman and published by CRC Press. This book was released on 2020-11-25 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain Size Control provides an excellent account of the understanding of many matters concerning grains, grain structure, and grain growth in controlling the grain size of polycrystalline metals. It considers the application of the principles of grain growth.
Download or read book The Effect of Grain Size on the Elevated Temperature Plastic Properties of Some High purity Aluminum Alloys written by Earl Curtis Vicars and published by . This book was released on 1952 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials for Automobile Bodies written by Geoffrey Davies and published by Butterworth-Heinemann. This book was released on 2012-03-30 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 Introduction -- 2 Design and material utilization -- 3 Materials for consideration and use in automotive body structures -- 4 The role of demonstration, concept and competition cars -- 5 Component manufacture -- 6 Component assembly: materials joining technology -- 7 Corrosion and protection of the automotive structure -- 8 Environmental considerations -- 9 Future trends in automotive body materials.
Download or read book Effect of Texture on Formability and Mechanical Anisotropy of a Severe Plastically Deformed Magnesium Alloy written by Sonia Modarres Razavi and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium and its alloys have been considered as alternatives to aluminum alloys and steels for structural applications in automotive and aerospace applications due to their superior specific strength and light-weight. However, they have hexagonal-close packed (hcp) structure, and thus have a small number of deformation systems resulting in low ductility and formability near room temperature, anisotropic thermo-mechanical response and strong deformation textures. The aim of this work is to investigate experimentally the effect of crystallographic texture generated during severe plastic deformation (SPD), on the subsequent formability and mechanical flow anisotropy in AZ31B Mg alloy. The proper control of grain size and texture through SPD is expected to result in better low temperature formability and better control of mechanical flow anisotropy. AZ31B Mg alloy has been successfully processed using equal channel angular extrusion (ECAE) following different processing routes, multiple passes, and different processing temperatures, in order to obtain samples with a wide variety of grain sizes, ranging from ~370 nm up to few microns, and crystallographic textures. Low temperature processing of the AZ31B Mg alloy was successful after initial high temperature processing. Smaller grain sizes were achieved using the temperature step-down method leading to incremental reduction in grain size at each ECAE pass. The temperature step-down method was utilized to develop hybrid ECAE routes to obtain specific crystallographic textures. Optimized hybrid ECAE routes were developed which resulted in a high strength/high ductility material with the average grain size of ~370 nm. The ECAE processed alloy showed a high tensile yield strength of ~380 MPa that has never been reported so far in AZ31 ingot metallurgy Mg alloys. The influence of grain size on the critical stress for the activation of individual deformation mechanisms was also investigated by systematically controlling the texture and grain size, and assuming the activation of mainly a single deformation mechanism through the careful selection of the loading direction on the processed samples. It was revealed that the Hall-Petch slope for the basal slip was much smaller than those of prismatic slip and tensile twinning.
Download or read book Aluminium Alloys written by Jürgen Hirsch and published by John Wiley & Sons. This book was released on 2008-11-17 with total page 2580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is a well established modern lightweight engineering and functional material with a unique combination of specific properties like strengh, formability, durability, conductivity, corrosion resistance, etc. It is present in many intelligent solutions in established markets like building, transport, packaging, printing, and many others, in our fast moving modern society. The various aluminium alloys can be processed quite efficiently in large quantities by conventional fabrication routes, as well as in special sophisticated forms and material combinations for highly innovative high–tec solutions and applications. This book contains latest information about all these aspects in form of the refereed papers of the II th International Conference on Aluminium Alloys "ICAA", where world–wide experts from academia and engineers from industry present latest results and new ideas in fundamental as well as applied research. Since 22 years the ICAA series provides scientists and engineers with a complete overview over the latest scientific and technological developments, featuring profound technology–based overviews and new innovative perspectives. This book is a reference for the scientific community as well as for the aluminium industry working on aluminium alloy development, processing and application issues. It gives a global perspective on the current focus of international research with emphasis on in–depth understanding of specific properties and applications of conventional and advanced aluminium alloys.
Download or read book Deformation Processing written by Walter A. Backofen and published by . This book was released on 1972 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminium Technology 86 written by T. Sheppard and published by . This book was released on 1986 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:
